Page 1
CM3 GYM SYSTEM
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to ensure proper
assembly of this product.
CLASS H
PART # 7657801
REV. B
Version: CM3-108
Revision: 12/08/06
Page 2
TABLE OF CONTENTS
Safety Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Gym Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Cabling Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
IMPORTANT SAFELY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
T
O MINIMIZE RISK, FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions on the use of this machine. Use only for
intended exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a
broken or jammed machine. Notify your authorized Life Fitness dealer and have repairs made by
an authorized service technician before use.
5. Be certain that the weight pin is inserted completely. Use only the pin provided by the manufacturer. If unsure, call your authorized Life Fitness dealer.
6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found
in this condition. DO NOT attempt to fix. Notify your authorized Life Fitness dealer.
7. Inspect cables and their connections before using machine. Pay particular attention to the cable
ends. DO NOT attempt to fix any problems. Notify your authorized Life Fitness dealer and have
repairs made by an authorized service technician before use.
8. Make sure all spring-loaded pull pins are fully engaged in the adjustment position and fully
tighten the thumbscrew before use.
9. Children must not be allowed near this machine. Supervise teenagers.
Note: In our continuing effort to improve our products, specifications are subject to change.
©2006 Life Fitness, a division of Brunswick Corporation. All rights reserved.
www.lifefitness.com
2
Page 3
IMPORTANT NOTES
Thank you for purchasing the Life Fitness CM3 Gym System. Please read these instructions
thoroughly and keep them for future reference.
This product must be assembled on a flat, level surface to assure its proper function.
DO NOT securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
TOOLS
REQUIRED FOR ASSEMBLY
O
Rubber mallet or hammer.
O
3/4" wrench.
O
9/16" wrench.
O
Ratchet with 3/4" and 9/16" sockets.
O
5/32" Allen wrench.
O
Adjustable wrench.
O
Tape measure.
BOLT LENGTH RULER
NOTE THAT BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT
.
3
BOLT LENGTH
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
6
Page 4
CM3 FOOTPRINT
1 SQUARE = 1' X 1'
M
INIMUM REQUIRED USABLE SPACE:
Length = 90 inches (229 cm) 7' 6"
Width = 103 inches (262 cm) 8' 7"
Height = 84 inches (213.5 cm) 7'
DIMENSIONS INCLUDING LP5 LEG PRESS (OPTIONAL):
Length = 102 inches (259 cm) 8' 6"
Width = 130 inches (330 cm) 10' 10"
4
1’
2’
3’
4’
5’
6’
4’
5’ 6’ 7’
8’
9’1’ 2’ 3’
7’
8’
9’
Page 5
5
PARTS LIST
Note: Some of the components may be pre-assembled.
1 ACU04-0906 FRONT BASE 1
2 ACU04-0909-107 UPRIGHT 1
3 ACU04-0907 BASE CONNECTOR 1
4 ACU04-0908 REAR BASE 1
5 ACU04-0902 RIGHT ARM 1
6 ACU04-0903 LEFT ARM 1
7 ACU04-1162 SEAT ADJUST 1
8 ACU04-1157 LEG PEDESTAL 1
10 ACU02-1071 PULLEY PLATE 2
11 ACU02-1093 BASE PLATE 2
12 ACU05-0295 C-RING 2
13 ACU02-1092 BOOM PULLEY PLATE 2
14 ACU04-0905 RIGHT BOOM PLATE 1
15 ACU04-0904 LEFT BOOM PLATE 1
16 ACU07-0100 SEAT/BACK PAD 2
17 ACU06-0337 ROLLER PAD 6
18 ACU01-2155 76" GUIDE ROD 2
19 ACU12-0067 ADJUST. SEWN HANDLE 2
20 ACU12-0068 SHORT SEWN HANDLE 2
21 ACU7292501 WEIGHT PLATE 15
22 ACU04-0622 LOW ROW BAR 1
23 ACU10-0204ASY HEAD PLATE ASSY 1
24 ACU04-0932A 3/4 X 18" TUBE 1
25 ACU04-0934A 3/4 X 18-3/8" TUBE 1
26 ACU04-0935 3/4 X 21" TUBE 1
27 ACU11-0060 WEIGHT STACK PIN 1
28 ACU06-0034 WEIGHT STACK CUSHION 2
29 ACU13-0112-2 WEIGHT STACK CABLE 1
30 ACU13-0112-4 LEG CABLE 1
31 ACU13-0112-5 ARM CABLE 1
32 ACU13-0112-1 BOOM CABLE 1
33 ACU04-1165 WEIGHT STACK SPACER 2
34 ACU04-1171 3-1/2" CABLE GUARD 1
35 ACU04-1342 4-1/2" CABLE GUARD 1
36 ACU05-0212 SHAFT COLLAR 2
37 ACU06-0051 3-1/2" PULLEY 18
38 ACU06-0035 4-1/2" PULLEY 3
39 ACUKN000097 QUICK CONNECT 4
40 ACU11-0068 T-HANDLE SPRING PIN 1
41 ACUDI1080080U SNAP LINK 4
42 ACU04-1343 GUIDE BRACKET 2
43 ACU06-0194 3-PRONG KNOB 1
44 ACU05-0277 ROLLER PAD CAP 6
45 ACU06-0363 PLASTIC WASHER 12
46 ACU05-0146 1/2" RH WASHER 2
47 ACU06-0021 RH CAP 2
48 ACU08-0074 3/8 X 3/4" FLANGE SPACER 2
49 ACU08-0066 3/8 X 1-1/16" FLANGE SPACER 2
50 ACU05-0300 ACCESSORY RING 2
51 ACU03-0042 3/8" X 1" SPACER 9
52 ACUMD000059 WEIGHT STACK LABEL 1
53 ACUDA1E03813416NB 3/8 X 1-3/4" BOLT 10
54 ACUDAEE51610018YB 5/16 x 1" BUTTON HEAD 6
55 ACUDA1E03820016NB 3/8 X 2" BOLT 2
56 ACU06-0358 2" NYLON SPACER 4
57 ACUDA1E03833416NB 3/8 X 3-3/4" BOLT 18
58 ACUDA1C01210413NB 1/2 X 104mm BOLT 1
59 ACU05-0030 12 LINK CHAIN 1
60 ACUDA1E03823416NB 3/8 X 2-3/4" BOLT 2
61 ACUDA1C01253413NB 1/2 X 5-3/4" BOLT 1
62 ACUDB2E01208000B 1/2" LOW HEIGHT LOCK NUT 2
63 ACUDB2E03811000B 3/8" LOCK NUT 40
64 ACUDC1250100020B 3/8" FLAT WASHER 18
65 ACU8D4AGG700-3 FRONT GUIDE CABLE 2
66 ACU04-1100 FOOT PLATE 1
67 ACUDA1E03830016NB 3/8 X 3" BOLT 4
68 ACUDA1E03841416NB 3/8 X 4-1/4" BOLT 4
70 ACUDA1E03811416NB 3/8 X 1-1/4" BOLT 2
71 AP04-0910 BACK PAD ADJUSTMENT 1
72 P04-0911 SWIVEL PULLEY ASSEMBLY 2
73 ACU12-0041 ANKLE STRAP 1
74 ACU13-0223-6 REAR GUIDE CABLE 2
Key Part # Description Qty Key Part # Description Qty
ACU04-0909
ACU04-1213 CM3 Acc. Bar
Adapter (Black)
See paperclip
Page 6
CABLE END ASSEMBLY:
Slide parts onto cable in the following order: Item 2, Item 4, Item 3.
Insert cable end into Item 1.
Slide entire assembly over Item 1 and secure it by screwing one Item 5 into both sides of Item 2 and
tightening.
6
CABLING DIAGRAM 1
ITEM QTY. PART NO. DESCRIPTION
1 1 7726201 COUPLER, QUICK CONNECT
2 1 7726401 HSNG, QUICK CONNECT
3 1 7726301 SLEEVE, QUICK CONNECT
4 1 3249901 SPRING, QUICK CONNECT
5 2 3250002 M5 X 0.8 HXS SOC CS ST BZ X 8
Page 7
7
CABLING DIAGRAM 2
P13-0112-2
Page 8
8
CABLING DIAGRAM 3
P13-0112-1
Page 9
9
CABLING DIAGRAM 4
P13-0112-5
Page 10
10
CABLING DIAGRAM 5
P13-0112-4
Page 11
11
STEP 1:
A. Loosely assemble two Base Plates (11) to the Front Base (1) and the Base Connector (3) using
four 3/8 x 3-3/4" Bolts (57) and four 3/8" Lock Nuts (13). See Figure 1.
B. Loosely assemble the Footplate (66) to the Front Base (1) using one 3/8 x 3" Bolt (67) and one
3/8" Lock Nut (63) as shown in Figure 1.
C. Loosely assemble the Rear Base (4) to the Base Connector (3) using two 3/8 x 3-3/4" Bolts (57),
two 3/8" Washers (64) and two 3/8" Lock Nuts (63).
D. Loosely assemble the Upright (2) to the Front Base (1) using two 3/8 x 2-3/4" Bolts (60), two 3/8"
Washers (64) and two 3/8" Lock Nuts (63).
FIGURE 1
2
66
1
63
3/8 X 2-3/4”
63
60
63
64
64
63
67
3
57
57 3/8 X 3-3/4”
11
3/8 X 3”
4
Page 12
12
STEP 2:
A. Loosely assemble the Right Arm (5) and Rear Base (4) using two 3/8 x 3-3/4" Bolts (57), two 3/8"
Washers (64) and two 3/8" Lock Nuts (63).
B. Loosely assemble the Left Arm (66) and Rear Base (4) using two 3/8 x 3-3/4" Bolts (57), two 3/8"
Washers (64) and two 3/8" Lock Nuts (63).
C. Loosely assemble both the Left Arm (5) and the Right Arm (6) to the Upright (2) using two 3/8 x
4-1/4" Bolts (57), four 3/8" Washers (64) and two 3/8" Lock Nuts (63).
63
FIGURE 2
5
6
64
2
68
3/8 X 4-1/4”
63
4
64
57
3/8 X 3-3/4”
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
6
Page 13
13
FIGURE 4
FIGURE 3
Make sure that the Weight Plates (21) are assembled as shown in Figure 3 and the Head Plate
Assembly (23) is assembled as shown in Figure 4.
Page 14
14
STEP 5:
A. Insert two Guide Rods (18) into the Rear Base (4) as shown in Figure 5. (Note: If you purchased
the CM3 Shroud Option, place the Guide Rods (18) through the Bottom Shroud Bracket (found in
Shroud Option box) and into the Rear Base (4) as shown in Figure 5.)
B. Lubricate Guide Rods (18) with silicon lube included with gym, or a silicon or teflon lube spray.
C. Slide two Weight Stack Spacers (33) and two Weight Stack Cushions (28) over Guide Rods (18).
D. Using extreme care, slide all fifteen Weight Plates (21) over the Guide Rods (18) and down onto
the Weight Stack Cushions (28). Make sure the Weight Plates (21) all face as shown.
E. Slide the Head Plate Assembly (23) down the Guide Rods (18), onto the weight plate stack.
F. Slide two Shaft Collars (36) over the Guide Rods (18) as shown in Figure 5.
28
FIGURE 5
36
18
23
21
33
CM3 SHROUD
OPTION ONLY!
4
Page 15
STEP 6:
A. Swing the Guide Rods (18) into the guide rod bushings in the Right Boom Plate (14) and Left
Boom Plate (15) as shown in Figure 6.
B. Loosely assemble the Right Boom Plate (14) and Left Boom Plate (15) to the Upright (2) using
three 3/8 x 3-3/4" Bolts (57) and three 3/8" Lock Nuts (63). See Figure 6.
C. Securely tighten all the nuts and bolts on the gym, starting with the nuts and bolts on the
frame, before proceeding any further.
D. Slide the Shaft Collars (36) to the top of the Guide Rods (18) and tighten set screws as shown in
Figure 6.
S
TEP 7:
A. Securely assemble one Seat/Back Pad (16) to the Seat Adjust (7) using two 3/8 x 3" Bolts (67)
and two 3/8" Washers (64). See Figure 7.
15
FIGURE 6
F
IGURE 7
16
7
64
67
3/8 X 3”
Page 16
STEP
8:
A. Securely assemble the Three Prong Knob (43) to the Front Base (1) as shown.
B. Insert the Seat Adjust Assembly (7) into the Front Base (1) as shown. The seat height can be
adjusted using the Spring Pin and can be secured with the Three Prong Knob (43).
C. Assemble the Leg Pedestal (8) to the Front Base (1) using two RH caps (47), one 1/2 x 104mm
Bolt (58), two 1/2" Washers (46) and one 1/2" Low Height Lock Nut (62).
Note: Tighten this connection enough to prevent excess play yet allow the Leg Pedestal to
rotate freely.
16
1/2 X 104mm
FIGURE 8
43
58
3
46
8
1
62
47
SPRING PIN
Page 17
17
STEP 9:
A. Detach Short Cable from both Rear Guide Cables (74) as shown in Figure 9 (B).
B. Slide Long Cables of Rear Guide Cables (74) through eyelets of Guide Bracket (42) as shown in
Figure 9 (B). Reattach Short Cable of Rear Guide Cables (74) to Long Cable, leaving Guide
Bracket (42) loose.
D. Assemble two Boom Pulley Plates (13) and two 3-1/2" Pulleys (37) to the Boom Plates (14 & 15)
using two 3/8 x 3-3/4" Bolts (57) and two 3/8" Lock Nuts (63). See Figure 9.
E. Loosely assemble one 4-1/2" Pulley (38), one 4-1/2" Cable Guard (35) and one 1" Spacer (51) to
the Boom Plates (14 & 15), using one 3/8 x 3-3/4" Bolt (57) and one 3/8" Lock Nut (63).
F. Loosely assemble one 3-1/2" Pulley (37), one 3-1/2" Cable Guard (34), one 1" Spacer (51) and
both Rear Guide Cables (74) to the Boom Plates (14 & 15), using one 3/8 x 4-1/4" Bolt (68) and
one 3/8" Lock Nut (63).
NOTE: Guide Bracket (42) will remain loose until attached to pulley assembly in later step.
FIGURE 9
Page 18
IMPORTANT!
U
NCOIL AND STRAIGHTEN ALL CABLES TO REMOVE ALL TWISTS BEFORE
INSTALLING.
STEP 10:
A. Assemble the Weight Stack Pin (27) to the
Head Plate Assembly (23) as shown in
Figure 10.
B. Screw the long threaded end of the Weight
Stack Cable (29) into the end of the Head
Plate Assembly (23). See Figure 10.
C. Route the Weight Stack Cable (29) around
the pulleys in the Boom Plates (14 & 15) as
shown in Figure 10.
Note: Make sure the cable runs in the
grooves of the pulleys.
D. Tighten the two 3/8 x 3-3/4" Bolts (57) hold-
ing the 3-1/2" Cable Guard (34) and the 41/2" Cable Guard (35)
Note: Make sure the guards are oriented
correctly.
E. Assemble two Pulley Plates (10) around
one 3-1/2" Pulley (37), using one 3/8 x
1-3/4" Bolt (53) and one 3/8" Lock Nut (63)
as shown in Figure 10.
18
FIGURE 10
Page 19
STEP 11:
A. Loop the Weight Stack Cable (29) around one 3-1/2" Pulley (37).
B. Assemble the 3-1/2" Pulley (37) with the Weight Stack Cable (29) around it to the Boom Plates
(14 & 15) using one 3/8 x 4-1/4" Bolt (68), two 3/8" Flat Washers (64), two Guide Cables (65),
two 3/8 x 1" Spacers (51) and one 3/8" Lock Nut (63). See Figure 11.
C. Screw the short threaded end of the Weight Stack Cable (29) into the end of the Guide Bracket
(42). See Figure 11.
D. Disassemble the Short Cables and the Turnbuckles on the ends of the Guide Cables (65) as
shown in Figure 11. Set these pieces aside; the Guide Cables will be reassembled later.
19
FIGURE 11
Page 20
STEP 12:
A. Loop the Boom Cable (32) around one 3-1/2" Pulley (37).
B. Assemble the 3-1/2" Pulley (37) with the Boom Cable (32) looped around it to the Guide Bracket
(42), using one 3/8 x 1-3/4" Bolt (53) and one 3/8" Lock Nut (63).
20
FIGURE 12
Page 21
STEP 13:
A. Securely assemble the ball end of the Leg Cable (30) and one 3-1/2" Pulley (37) to the Leg
Pedestal (8), using two 3/8 x 3-3/4" Bolts (57), two 3/8 x 1-1/16" Flange Spacers (49), two 3/8"
Flat Washers (64) and two 3/8" Lock Nuts (63).
Note: The Leg Cable (30) must be routed over the retaining bolt as shown in Figure 13.
B. Securely assemble one 3-1/2" Pulley (37) to the Front Base (1), using one 3/8 x 3" Bolt (67), two
3/8 x 3/4" Flange Spacers (49), two 3/8" Flat Washers (64) and one 3/8" Lock Nut (63).
Note: The Leg Cable (30) must be routed over the retaining bolt as shown in Figure 13.
C. Carefully slide the Guide Cables (65) through the Guide Bracket (43) as shown in Figure 13(B).
D. Reassemble the ends of the Guide Cables as shown in Figure 13(B)by attaching the Short
Cables and Turnbuckles that were removed in Step 11(D).
E. Assemble one 3-1/2" Pulley (37) to the Base Plates (11), using one 3/8 x 4-1/4" Bolt (68), two 3/8"
Flat Washers (64), two Guide Cables (65), two 3/8 x 1" Spacers (51) and one 3/8" Lock Nut (63).
Note: Loop the Leg Cable (30) around the 3-1/2" Pulley (37) before attaching it to the Base
Plates (11), as shown in Figure 13.
F. Adjust the Turnbuckle on each Guide Cable (65) to add tension to the Guide Cables (65) until
they are taut. Secure Turnbuckle with the Jam Nuts as seen in Figure 13(B).
21
63
FIGURE 13
63
51
64
8
3/8 X 4-1/4” 68
2
11
48
37
49
67
64
3/8 X 3-3/4” 57
30
3/8 X 3”
(B)
42
TURN BUCKLE
SHORT CABLE
65
Page 22
22
FIGURE 14
S
TEP 14:
A. Securely assemble one 3-1/2"
Pulley (37) to the Pulley Plates (10),
using one 3/8 x 1-3/4" Bolt (53) and
one 3/8" Lock Nut (63).
Note: Loop the Leg Cable (30) over
the Pulley before assembling the
Pulley Plates, as shown in Figure
14.
STEP 15:
A. Securely assemble one 3-1/2"
Pulley (37) and both Rear Guide
Cables (74) to the Base Plates (11),
using one 3/8 x 4-1/4" Bolt (68), two
3/8 x 1" Spacers (51) and one 3/8"
Lock Nut (63).
Note: Loop the Leg Cable (30) over
the Pulley before assembling the
Base Plates, as shown in Figure 15.
B. Adjust the Turnbuckle at the top of
each Rear Guide Cable (74) to add
tension to the Rear Guide Cables
(74) until they are taut.
C. Screw the threaded end of the Leg
Cable (30) into the end of the Pulley
Bracket (9).
F
IGURE 15
Page 23
STEP 16:
A. Route the Arm Cable (31) through the Left Arm (6) as shown in Figure 16.
B. Loop the Arm Cable (31) around one 4-1/2" Pulley (38).
C. Securely assemble the 4-1/2" Pulley (38) with the Arm Cable (31) around it to the Left Arm (6),
using one 3/8 x 2" Bolt (55) and one 3/8" Lock Nut (63).
23
FIGURE 16
Page 24
STEP 17:
A. Securely assemble two 3-1/2" Pulleys (37) to the Base Plates (11), using two 3/8 x 3-3/4" Bolts
(57), one 3/8 x 1" Spacer (51) and two 3/8" Lock Nuts (63).
B. Loop the Arm Cable (31) between the two Pulleys (37) around one 3-1/2" Pulley (37) as shown
in Figure 17.
C. Securely assemble the 3-1/2" Pulley (37) with the Arm Cable (31) around it to the Guide Bracket
(42), using one 3/8 x 1-3/4" Bolt (55) and one 3/8" Lock Nut (63).
24
F
IGURE 17
Page 25
STEP 18:
A. Route the Arm Cable (31) through the Right Arm (5) as shown in Figure 18.
B. Loop the Arm Cable (31) around one 4-1/2" Pulley (38).
C. Securely assemble the 4-1/2" Pulley (38) with the Arm Cable (31) around it to the Right Arm (6),
using one 3/8 x 2" Bolt (55) and one 3/8" Lock Nut (63).
25
FIGURE 18
Page 26
STEP 19:
A. Insert Arm Cable (31) ends through Swivel Pulley Assemblies (72).
B. Insert Swivel Pulley Assemblies (72) into Left Arm (5) and Right Arm (6).
C. Secure Swivel Pulley Assemblies (72) in Left Arm (5) and Right Arm (6) using one C-Ring (12)
each.
C. Attach Quick Connects (39) to each end of the Arm Cable (31). See Diagram 1, page 6.
26
FIGURE 19
Page 27
STEP 21:
A. Assemble two Roller Pads (17) to the Leg Pedestal (8) using one 3/4 x 18" Tube (24), four
Plastic Washers (45), two Roller Pad Caps (44) and two 5/16 x 1" Button Head Allen Screws (54).
B. Assemble two Roller Pads (17) to the Seat Adjust (7) using one 3/4 x 18-3/8" Tube (25), four
Plastic Washers (45), two Roller Pad Caps (44) and two 5/16 x 1" Button Head Allen Screws (54).
C. Assemble two Roller Pads (17) to the Back Pad Adjustment (8) using one 3/4 x 21" Tube (26),
four Plastic Washers (45), two Roller Pad Caps (44) and two 5/16 x 1" Button Head Allen Screws (54).
STEP
20:
A. Securely assemble one Seat Pad (16) to the Back Pad Adjustment (71) using two 3/8 x 1-1/4"
Bolts (70) and two 3/8" Washers.
B. Securely assemble the Back Pad Adjustment (71) to the Upright (2), using one 1/2 x 5-3/4" Bolt
(61) and one 1/2" Low Height Lock Nut.
27
16
FIGURE 20
FIGURE 21
62
71
3/8 X 1-1/4”
64
70
2
61
1/2 X 5-3/4”
Page 28
STEP 22:
A. Make adjustments to the cables’ tension at the locations shown in Figure 22.
B. Adjust the Turnbuckle on each Guard Cable (65) to change the tension of the Guide Cables (65).
C. If by the time the Gym is assembled, the Head Plate (23) does not sit on top of the first Weight
Plate (21), push the Head Plate (23) down, insert the Weight Stack Pin (27) and perform several
repetitions. This will relax the cable system and prevent the Head Plate (23) from lifting up.
D. If after completing the previous step, the Head Plate (23) still does not sit on top of the first
Weight Plate (21) or if there is excess slack in the cable system, adjust the threaded ends of the
Cables attached to the Pulley Brackets (42) accordingly and retighten the jam nuts.
E. For maximum performance, the Head Plate (23) should just barely sit on the Weight Plate (21).
F. After making adjustments, make sure all jam nuts are securely tightened.
This completes the assembly of the CM3 Gym System. To add the CM3 Shroud Option
(purchased seperately), refer to the CM3 Shroud Kit Assembly Instructions.
28
FIGURE 22
Page 29
MAINTENANCE
O
We recommend cleaning your product (pads and frame) on a regular basis, using warm
soapy water. Touch-up paint can be purchased from your Life Fitness customer service representative at 1-800-351-3737.
O
Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
O
Lubricate guide rods with a teflon based (or equivalent) lubricant on a regular basis.
O
PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT THAT
YOUR EQUIPMENT REQUIRES SERVICE YOU WILL BE ASKED FOR THIS INFORMATION. .
Remember to fill out your registration card on-line at www.lifefitness.com/registration
.
MODEL #______________________________________________________
SERIAL #______________________________________________________
DATE OF PURCHASE: ___________________________________________
DEALER’S NAME: ______________________________________________
DEALER’S PHONE # ____________________________________________
THANK YOU FOR PURCHASING THE LIFE FITNESS CM3 GYM SYSTEM!
29
SERIAL NUMBER LOCATION
Page 30
30
WARRANTY
Life Fitness extends the following LIMITED WARRANTY to the original owner of the Life Fitness products. The Warranty
terms apply to IN HOME USE ONLY.
1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the Life Fitness product or a weld should crack or
break, it will be repaired or replaced by Life Fitness. Terms: Lifetime – for so long as the Customer owns the Life
Fitness product.
2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, Life Fitness will
supply replacement parts: all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining
clips, adjustable pre-stretch slides, roller pad shafts, allen head bolts, weight selector pin, weight stack shaft, set
screws, protector caps, adjustment chain, cotter pin, plunger, spring and knob. Terms: Lifetime – for so long as the
Customer owns the Life Fitness product.
3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material
or workmanship, Life Fitness will repair or replace them, at its option. Terms: Three (3) years.
4. CONDITIONS AND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other
than an authorized Life Fitness Service Center, any improper assembly, accident, or any other condition resulting
from occurrences beyond the control of Life Fitness will void this Limited Warranty.
5. REPLACEMENT AND REPAIR EXPENSES. Life Fitness will provide only replacement parts or repair under this warranty. The Owner is responsible for all other costs. Such costs may include, but are not limited to: a. labor charges
for service, removal, repair or reinstallation of the Life Fitness product or any component part; b. shipping, delivery,
handling and administrative charges for returning parts to Life Fitness; and c. all necessary or incidental costs related to installation of the replacement parts.
6. SHIPPING. If shipping by the Owners is deemed necessary (in sole discretion of Life Fitness), parts should be
shipped in their original carton or equivalent packaging, fully insured with shipping charges prepaid. Life Fitness will
not assume any responsibility for any loss or damage incurred in shipping.
7. CLAIM PROCEDURES. If service on your Life Fitness product is required during the warranty period, please contact
our Customer Service Department at 1-800-351-3737 for instructions regarding returning or replacing parts. Please
have available the following information: (i) the dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your
product (the serial number location is called out on the final assembly drawing included with your assembly instruction); (iv) a description of the nature of the problem.
8. OWNER’S RIGHT. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary
depending on local law.
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law,
shall have no greater duration than the warranty period set forth above. There are no warranties which extend
beyond the description in this Limited Warranty.
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not
apply to you.
10. DISCLAIMER. No other express warranty has been made or will be made on behalf of Life Fitness with respect to
any Life Fitness product or the operation, repair or replacement of any Life Fitness product. Life Fitness shall not be
responsible for injury, loss of use of the Life Fitness product, inconvenience, loss or damage to personal property,
whether direct or indirect, and incidental or consequential damages. The above limitation or exclusion may not apply
to you.
Page 31
31
LIFE
FITNESS ASIA PACIFIC LTD
Room 2610, Miramar Tower
132 Nathan Road
Tsimshatsui, Kowloon
HONG KONG
Telephone: (+852) 2891.6677
FAX: (+852) 2575.6001
L
IFE FITNESS ATLANTIC BV
L
IFE FITNESS BENELUX
Bijdorpplein 25-31
2992 LB Barendrecht
THE NETHERLANDS
Telephone: (+31) 180.646.666
FAX: (+31) 180.646.699
L
IFE
FITNESS B
ENELUX NV
Parc Industriel de Petit-Rechain
4800 Verviers
BELGIUM
Telephone: (+32) 87.300.942
FAX: (+32) 87.300.943
L
IFE FITNESS DO BRAZIL
Av. Dr. Dib Sauaia Neto 1478
Alphaville, Barueri, SP
06465-140
BRAZIL
Telephone (+55) 11.4193.8282
FAX: (+55) 11.4193.8283
L
IFE FITNESS AUSTRIA
Vertriebs GmbH
Hintschiggasse 1
1100 Vienna
AUSTRIA
Telephone: (+43) 1.61 57 198
FAX: (+43) 1.61 57 198.20
LIFE
FITNESS IBERIA
Pol. Ind. Molí dels Frares. c/C, nº 12
08620 Sant Vicenç dels Horts (Barcelona)
España
Telephone: (+34) 93.672.4660
FAX: (+34) 93.672.4670
L
IFE FITNESS
EUROPE GMBH
Siemensstrasse 3
85716 Unterschleissheim
GERMANY
Telephone: (+49) 89.31 77 51.0
FAX: (+49) 89.31 77 51.99
L
IFE FITNESS ITALIA S.R.L.
Via San Pieretto
37010 AFFI (Verona)
ITALY
Telephone: (+39) 045.7238204
FAX: (+39) 045.7238197
L
IFE FITNESS LATIN AMERICA
AND
CARIBBEAN
5100 North River Road
Schiller Park, Illinois 60176
U.S.A.
Telephone: (+1) 847.288.3300
FAX:(+1) 847.288.3762
L
IFE FITNESS UK LTD
Queen Adelaide
Ely, Cambs CB7 4UB
UNITED KINGDOM
Telephone: (+44) 1.353.666 017
FAX: (+44) 1.353.666 018
L
IFE FITNESS JAPAN
Nippon Brunswick Bldg., #8F
5-27-7 Sendagaya
Shibuya-Ku, Tokyo
Japan 151-0051
Telephone: (+81) 3.3359.4309
FAX: (+81) 3.3359.4307
CORPORATE HEADQUARTERS
5100 North River Road
Schiller Park, Illinois 60176 • U.S.A.
847.288.3300 • FAX: 847.288.3702
800.351.3737 (Toll-free within U.S.A., Canada)
www.lifefitness.com
INTERNATIONAL
OFFICES
Loading...