Life Fitness CLUB SEATED ROW User manual
CLUB SERIES SEATED ROW
Part # 7160901
Rev A.
ASSEMBLY INSTRUCTIONS
Revision:8/7/011
PARTS LIST
#
Y
#
Y
#02ROYAL BLUE
#03SLATE
#04CRANBERRY
#05NORTHWOODS
#06 SPACE BLUE
#07AMERICAN BEAUTY RED
#08SUEDE
#12 BLACK
#13HUNTER GREEN
#14 REGIMENTAL BLUE
#15GINGERSNAP
#16CONCORD
#17URQUOISE
#18 RASPBERRY
#19CROCUS
KEY PART
1 70180xx TOWER 1 11 3102933 3/8 X 2” BOLT 4
1A 7024201 CABLE 1 12 6957001 WEIGHT STACK LABEL 1
1B 6692601 END CAP 3 X 2 2 13 3102903 3/8 X 2-1/2” BOLT 2
1C 6866601 CAP, RH-20 BLK 2 14 3102922 3/8 X 2-3/4” BOLT 16
1D 3102933 3/8-16 X 2 BOLT 1 15 3102906 3/8 X 4” BOLT 2
1E 3102514 3/8 FLAT WASHER 2 16 3102940 3/8 X 5” BOLT 2
1F 3222801 4.5" PULLEY 1 17 3202407 3/8 X 3-1/4” BUTTON HEAD BOLT 4
1G 6866701 3/8 RH WASHER 2 18 3102807 3/8” LOW HEIGHT LOCK NUT 28
1H 3102807 3/8-16 NYLOCK NUT LOW HT 1 19 3102514 3/8” SAE WASHER 48
1I 6714901 GUIDE ROD BUSHING 2 20 6866701 3/8” RH WASHER 56
2 70251xx ASSY, MAIN UPRIGHT 1 21 3203501 PILLOW BLOCK 2
2A 6967402 ASSY, SEAT ADJ BLK 1 22 3116001 1-1/4” SQ. RUBBER BUMPER 2
2B 6897001 ADJ PLATE 15 POS 1 23 6913801 WEIGHT STACK SELECTOR PIN 1
2C 6897101 ADJ PLATE 1 24 3108001 WEIGHT STACK CUSHION 2
2D 3234301 5/16-18 X .5 SCREW 4 25 6866601 BLACK RH CAP 4
2E 6912202 HINGE BLK 2 26 69131xx CHEST PAD 1
2F 7025002 ASSY, SEAT ADJ BLK 1 27 68775xx SEAT PAD 1
2G 6897101 ADJ PLATE 1 28 3222001 1” SHAFT COLLAR 2
2H 6897001 ADJ PLATE 15 POS 1 29 6714901 GUIDE ROD BUSHING 2
2I 3234301 5/16-18 X .5 SCREW 4 30 6996001 PLACARD LABEL 1
2J 3102416 2 X 1 END CAP 2 31 6995801 LANGUAGE PLACARD LABEL 1
3 70189xx RIGHT TOWER SUPPORT 1 32 6887202 10 LB. WEIGHT PLATE (STD) 20
3A 7024101 COATED FOOT BOARD 2 33 6888402 15 LB. WEIGHT PLATE (OPT) 10
3B 3108402 6/8-16 X 1.5 BOLT 4 34 6927001 GUIDE ROD 2
3C 6866601 CAP, RH-20 BLK 4 35 3230701 STARLOCK WASHER 4
4 70190xx LEFT TOWER SUPPORT 1 36 6866602 WHITE RH CAPS 50
5 70246xx ASSY, BOOM SUPPORT 1 OR 6866603 PLATINUM RH CAPS 50
6 70247xx ASSY, TOP BOOM 1 37 6861902 TOP COVER SHROUD BLK 1
7 70254xx ASSY, PIVOT ARM 1 38 6862102 FRONT SIDE SHROUDS BLK 2
7A 6912001 RUBBER GRIP 4 39 7024407 FRONT PLATINUM SHROUD 1
7B 3222801 4.5" PULLEY 1 40 6925202 ASSY, FULL BACK SHROUD 1
7C 6405201 2 SQ END CAP 4 OPTION* 7052602 ASSY, FULL FRONT SHROUD 1
8 69010xx GUIDE ROD SUPPORT 1
9 6923602 HEAD PLATE 1
10 3102901 3/8 X 1-1/4” BOLT 2
DESCRIPTION QT
KEY PART
DESCRIPTION QT
*For all 5 digit part numbers you need to add the color at the end.
For shrouds and weldments please use the following codes: German, Poruguese, Spanish, Japaneese, and
xxxxx07 Denotes Platinum Italian.
xxxxx08 Denotes White
*For upholstery, please use the following codes:
**Language placard kit comes with Dutch, French,
(2X)
1C
1E
1
(2X)
(2X)
1B
1H
(2X)
1G
1D
1F
1A
1I
(2X)
18
1A
1
3
4
3/8 X 2-3/4” 14
36
19
20
FIGURE 1
STEP 1:
• LOOSELY assemble the RIGHT and LEFT TOWER SUPPORT (3 & 4) to the TOWER (1) using eight RH CAPS (36), four 3/8
X 2-3/4” BOLTS (14), eight 3/8” SAE WASHERS (19), eight 3/8” RH WASHERS (20) and four 3/8” LOW HEIGHT LOCK
NUTS (18) as shown in FIGURE 1.
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
4
6
1A
PLA TE
FIGURE 2-B
3 X 2” TUBE
2E
FLUSH
3C
4
3A
FLUSH
36
3B
3
19
20
15 3/8 X 4”
FLUSH
FLUSH
2G
2I
2C
2
2B
2A
2F
2D
2J
18
2H
2E
FIGURE 2
STEP 2:
• LOOSELY assemble the MAIN UPRIGHT (2) between the RIGHT and LEFT TOWER SUPPORT (3 & 4) using four RH CAPS
(36), two 3/8 X 4” BOLTS (15), four 3/8” SAE WASHERS (19), four 3/8” RH WASHERS (20) and two 3/8” LOW HEIGHT
LOCK NUTS (18) as shown in FIGURE 2.
• Proceed to tighten up the last two connections made, using the following steps:
• Shim up the RIGHT and LEFT TOWER SUPPORTS (3&4) so that they are flush with the PLATES on the TOWER (1)
then SECURELY TIGHTEN. SEE FIGURE 2-B
• Shim up the MAIN UPIRIGHT (2) so that it is flush with the PLATES of the RIGHT and LEFT TOWER SUPPORTS
(3&4) then SECURELY TIGHTEN. SEE FIGURE 2-B
5
Loading...