PARTS LIST
#02ROYAL BLUE
#03SLATE
#04CRANBERRY
#05NORTHWOODS
#06 SPACE BLUE
#07AMERICAN BEAUTY RED
#08SUEDE
#12 BLACK
#13HUNTER GREEN
#14 REGIMENTAL BLUE
#15GINGERSNAP
#16CONCORD
#17URQUOISE
#18 RASPBERRY
#19CROCUS
KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QTY
1 69767xx TOWER 1 16 3102942 3/8 X 3-1/2” BOLT 2
1A 6968201 CABLE 1 17 3102905 3/8 X 3-3/4” BOLT 6
1B 6692601 3 X 2 END CAP 3 18 3202404 3/8 X 3” BUTTON HEAD BOLT 4
1C 6714901 GUIDE ROD BUSHING 2 19 3102807 3/8” LOW HEIGHT LOCK NUT 23
1D 3222801 4.5" PULLEY 3 20 3230701 STARLOCK WASHER 4
1E 3102807 3/8-16 NYLOCK NUT LOW HT 3 21 3102514 3/8” SAE WASHER 34
1F 6866701 3/8 RH WASHER 4 22 6866701 3/8” RH WASHER 46
1G 6866601 CAP, RH-20 BLK 4 23 3203501 PILLOW BLOCK 2
1H 6925801 LABEL, KEEP CLEAR 1 24 6913801 WEIGHT STACK SELECTOR PIN 1
1I 3102933 3/8-16 X 2 BOLT 1 25 3108001 WEIGHT STACK CUSHION 2
1J 6480301 3/8 SPACER 4 26 6866601 BLACK RH CAP 4
1K 3102903 3/8-16 X 2.5 BOLT 2 27 3222001 1” SHAFT COLLAR 2
1L 3102514 3/8 FLAT WASHER 2 28 3116001 1-1/4” RUBBER BUMPER 1
2 69751xx ASSY, LEG CURL SUPPORT 1 29 6714901 GUIDE ROD BUSHING 2
3 69734xx FRONT BRACE 1 30 6912801 2” ACCORDION SLEEVE 2
4 69842xx PIVOT ARM 1 31 6981401 PLACARD LABEL 1
4A 6946901 ROLLER PADS 2 32 6986101 LANGUAGE PLACARD LABEL 1
4B 3119303 1.25" END CAP 2 33 6957001 WEIGHT STACK LABEL 1
4C 3222701 SHAFT COLLAR 2 34 6887202 10 LB. WEIGHT PLATE (STD) 20
4D 6965901 ADJ PLATE 1 35 6888402 15 LB. WEIGHT PLATE (OPT) 10
4E 6965901 ADJ PLATE 1 36 69579xx THIGH PAD 1
4F 6412001 SPRING PIN 1 37 69307xx CHEST PAD 1
4G 3234301 SCREW 4 6866602 WHITE RH CAP 42
4H 6974102 ROLLER PAD SPPT BLK 1 OR 6866603 PLATINUM RH CAP 42
5 68839xx GUIDE ROD SUPPORT 1 38 3221601 STARLOCK WASHER 12
6 6888902 CAM SHROUD BLK 1 39 3202405 3/8 X 3.5 BUTTON HEAD BOLT 10
7 6973702 PIVOT ARM COUNTER BALANCE 1 40 3202401 3/8 X 1 BUTTON HEAD BOLT 2
8 69733xx CROSS SUPPORT 1 41 6862007 FRONT PARTIAL SHROUD 1
9 69766xx SEAT FRAME 1 42 6861302 REAR PARTIAL SHROUD 1
9A RUBBER GRIP 2 43 6861007 FRONT FULL SHROUD 1
10 6981602 CAM COUNTER BALANCE BLK 1 44 6925002 REAR FULL SHROUD 1
11 6923602 HEAD PLATE BLK 1 45 6971601 WEIGHT STACK LABEL 1
12 6926901 GUIDE ROD CHROME 2 46 6957101 HEAVY WEIGHT STACK LABEL 1
13 3102902 3/8 X 2-1/4” BOLT 2
14 3102903 3/8 X 2-1/2” BOLT 3
15 3102922 3/8 X 2-3/4” BOLT 10
*For all 5 digit part numbers you need to add the color at the end.
For shrouds and weldments please use the following codes: German, Poruguese, Spanish, Japaneese, and
xxxxx07 Denotes Platinum Italian.
xxxxx08 Denotes White
*For upholstery, please use the following codes:
**Language placard kit comes with Dutch, French,
1A
1
19
2
22
21
3/8 X 2-3/4” 15
38
3/8 X 3-3/4” 17
FIGURE 1
STEP 1:
• LOOSELY assemble the top of the LEG CURL SUPPOR T (2) to the TOWER (1) using four RH CAPS (38), two 3/8 X 2-3/4” BOL TS (15),
four 3/8” SAE W ASHERS (21), four 3/8” RH W ASHERS (22) and two 3/8” LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 1.
• LOOSELY assemble the bottom of the LEG CURL SUPPOR T (2) to the TOWER (1) using four RH CAPS (38), two 3/8 X 3-3/4”
BOL TS (17), four 3/8” SAE WASHERS (21), four 3/8” RH W ASHERS (22) and two 3/8” LOW HEIGHT LOCK NUTS (19) as shown
in FIGURE 1.
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
6
4
1A
1
19
3
9
9A
22
21
3/8 X 3-3/4” 17
38
FIGURE 2
STEP 2:
• LOOSEL Y assemble the FRONT BRACE (3) to the SEAT FRAME (9) and the TOWER (1) using eight RH CAPS (38), four 3/8 X 3-3/4”
BOL TS (17), eight 3/8” SAE WASHERS (21), eight 3/8” RH W ASHERS (22), and four 3/8” LOW HEIGHT LOCK NUTS (19) as shown
in FIGURE 2.
5