Liebherr HC1030 Specifications

Unit Dimensions

Ventilation Requirements

Kitchen Cabinet Base Grille

A

B

C

B - Side view

Cabinet

Refrigerator

This is a fully integrated refrigerator-freezer which means that it is fully enclosed by a kitchen cabinet. This type
of cabinet must be carefully constructed using the correct dimensions and it must provide suitable ventilation to
ensure proper appliance operation.

NOTICE
If the following ventilation dimensions are not observed the compressor will be damaged.

Kitchen Cabinet Airfl ow

The following ventilation dimensions must be observed: There must be a ventilation space at least 31 in.²
(200 cm² ) at the airfl ow inlet (1) and at the airfl ow outlet (2).
The top ventilation space can be directed in one of the following ways:
A) Directly over the appliance (2) with either an optional factory air vent or custom made one.
B) Above the cabinet and below the ceiling (3).
C) Through a vent installed in a so t (4).
A minimum space of 1 1/2" (38mm) is required when a cabinet is built above and/or underneath.

Ventilation through the cabinet base at the bottom can be
achieved by installing the provided ventilation grille (3) or
via a ventilation opening of at least 31 in.² (200 cm²).

When using the provided ventilation grille (3), please
proceed as follows:

- In the cabinet base, cut out a ventilation opening that
is 17-23/32 in. (450 mm) in width and 2-7/32 in.
(56 mm) in height.

-

Insert ventilation (3) grille into the cabinet base cut-out (1).

- From the back side, slide the snap-fi ts (2) into the grille
until the hooks make contact with the cabinet base.

- Completely mount cabinet base (with ventilation grille and
snap-fi ts) to kitchen cabinet.

A minimum spa ce of 1 1/2 in.
is require d when a cabinet is
built abo ve and/or underne ath.

A. 21-7/16" (544 mm)

B. 69-11/16" (1770 mm)

C. 22" (559 mm)

D. 69-3/4" - 70-3/8" (1772 - 1788 mm)

E. min. 22" (560 mm) max. 22-3/4" (578 mm)

F. min. 21 5/8", rec. 22" (min. 550 mm, rec. 560 mm)

G. 21-5/8" (550 mm)

H. 1-5/8" (40 mm)

J. 27-3/8" (695 mm)

K. 24-3/4" (629 mm)

L. max. 3/4" (19 mm)

M. 9-21/32" (245 mm)

➀ Power cord
➁ Level
➂ Fish line for power cord
➃ 3" of the cabinet needs to be fi nished

as it can be seen when the door is open.

In the case of Side-by-Side installation,
two appliances next to one another, build
the appliances into separate kitchen units.

24"

Diagrams

Liebherr HC 1030

Fully Integrated/Seamless

24"

24"

German Engineering: Our superior products o er
premium quality, cutting edge design and innovative
features that fi t your busy lifestyle. Exclusive
components and materials, along with the latest
production processes, ensure energy e ciency and
performance for years to come.

Energy Star: Liebherr refrigerators help produce
less energy waste and greenhouse gas emissions
with the goal of having the least damaging effect on
the environment, while offering solutions that help
consumers conserve energy.

DuoCooling: The dual refrigeration system creates
optimal conditions in both the refrigerator and
freezer which lengthens the shelf life of food items
for a healthier lifestyle. This technology also
preserves the fl avor and texture of foods since
there is no transfer of unwanted air, moisture or
food aroma between the two compartments.

SuperCool/SuperFros t: Simply quick chill
and/or freeze fresh groceries to preserve
optimum freshness and seal in flavors, textures
as well as maintain essential vitamins and
minerals.

SuperQuiet: Noise is kept to a minimum with
virtually silent, speed controlled compressors and
a low-noise cooling circuit; while also ensuring
exact performance, energy e ciency and
SuperQuiet operation.

BioCool: BioCool regulates humidity to keep fruits
and vegetables fresher for longer. The drawer
extends smoothly on either a roller system or on
premium-quality telescopic rails, both of which
guarantee ease-of-use and allow convenient
access for a perfect view of stored products.
Humidity is regulated via slider control.

Precision Electronics: The precise electronic
controls have a digital temperature display and are
easy to use, via either a touch screen interface or
electronic keys depending on the model.

GlassLine: The elegant yet tough GlassLine
shelves are scratch resistant and easy to clean
as well as dishwasher safe. The space-saving
shelves are designed for organization and are
completely adjustable to suit your needs and the
contents of the refrigerator. Additionally, the
lighting shines through for a brighter interior.

FrostSafe Drawers: The removable FrostSafe
Drawers create flexible storage space that can
easily expand to accommodate larger items.
Advantageously, this spacious and practical
transparent drawer system helps you fit more
as well as maintain temperature by keeping
cold air from escaping when the door is open.

Fully Integrated/Seamless Features

The HC 1030 blends in beautifully with any
kitchen cabinetry, providing diverse design
options to fit your dream kitchen. Liebherr’s
door-on-door technology allows for custom
paneling to be affixed directly onto the
appliance door, ensuring that the cabinet and
the refrigerator door open as one, allowing for
additional design options and easy installation.
Y

ou can match the refrigerator panel
dimensions to cabinetry of 80" or 84" high for
additional storage space over the refrigerator.

The HC 1030 includes a BioCool drawer which
regulates humidity via a slider control to help
keep fruits and vegetables fresher for longer.

Fully Integrated/Seamless HC 1030

Comfort

Powered by TCPDF (www.tcpdf.org)

Energy consumption

in 365 days kWh
Estimated Yearly Energy Cost in US $

Capacity

Total capacity cu.ft. (l)
Refrigerator comp. cu.ft. (l)
NoFrost Freezer comp. cu.ft. (l)

Shipping weight lbs. (kg)
Climate rating
Sound rating dB(A)
Door hinges
Outside dimensions

in inches (cm) H/W/D

Cut out dimensions

in inches (cm) H /W/D

Energy supply

Voltage V/Hz

* Energy Cost will depend on utility rates and use. Estimated energy cost based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3

395
47*

9.4 (267)

7.0 (199)

2.4 (68)

155.2 (70.4)
SN-T
38**
right, reversible

69 11/16"+11/16"/22"/21 7/16" (177+1.6/55.9/54.4)

69-3/4"-70-3/8"/max. 22-3/4"/min. 21-21/32" (177.2-178.8/max. 57.8/max. 55)

115/60