Page 1
Global LCD Panel Exchange Center
( ) Preliminary Specification
() Final Specification
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
SPECIFICATION
FOR
APPROVAL
Title 23” Full HD TFT LCD
BUYER HP
MODEL
SIGNATURE DATE
/
/
SUPPLIER LG Display Co., Ltd.
*MODEL LM230WF5
SUFFIX TLE1
*When you obtain standard approval,
please use the above model name without suffix
APPROVED BY
K.G. PARK / G.Manager
REVIEWED BY
H.S.KIM / Manager [C]
S.Y. AN / Manager [M]
DATE
C.S. SHIN / Manager [P]
/
Please return 1 copy for your confirmation
With your signature and comments.
Ver. 1.0 Sov. 26, 2010 1/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
PREPARED BY
S.J. Moon / Engineer
Product Engineering Dept.
LG Display Co., Ltd
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
Contents
No ITEM
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
1) ELECTRICAL CHARACTERISTICS 6
2) INTERFACE CONNECTIONS 8
3) LVDS characteristics 11
4) SIGNAL TIMING SPECIFICATIONS 14
5) SIGNAL TIMING WAVEFORMS 15
6) COLOR INPUT DATA REFERNECE 16
7) POWER SEQUENCE 17
8) POWER DIP CONDITION 18
Page
4 OPTICAL SPECIFICATIONS 19
5 MECHANICAL CHARACTERISTICS 24
6 RELIABILITY 27
7 INTERNATIONAL STANDARDS 28
1) SAFETY 28
2) EMC 28
8 PACKING 29
1) DESIGNATION OF LOT MARK 29
2) PACKING FORM 29
9 PRECAUTIONS 30
1) MOUNTING PRECAUTIONS 30
2) OPERATING PRECAUTIONS 30
3) ELECTROSTATIC DISCHARGE CONTROL 31
4) PRECAUTIONS FOR STRONG LIGHT EXPOSURE 31
5) STROAGE 31
6) HANDLING PRECAUTIONS FOR PROTECTION FILM 31
Ver. 1.0 Sov. 26, 2010 2/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
Record of revisions
Revision No
Ver. 0.1
Ver. 0.2
Ver. 0.3
Ver. 1.0
Date Page
Jun. 21, 2010
Aug. 25, 2010
Sep. 27, 2010
Nov. 26, 2010
4 page
7 page
3 page
19 page
26 page
Description
First Draft, Preliminary Specifications.
Update the Power Consumption.
Update the LED bar Electrical characteristics
Update the Note 7
Update the Surface treatments ( 2H → 3H)
Update the Color Coordinates.
Update the Altitude. (operating)
: 0 - 10,000 feet(3,048m) → 0 – 16,400(5,000m)
Final Specification
Ver. 1.0 Sov. 26, 2010 3/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
1. General description
LM230WF5-TLE1 is a Color Active Matrix Liquid Crystal Display Light Emitting Diode ( White LED) backlight
system without LED driver. The matrix employs a-Si Thin Film Transistor as the active element. It is a
transmissive type display operating in the normally white mode. It has a 23 inch diagonally measured active
display area with FHD resolution (1080 vertical by 1920 horizontal pixel array) Each pixel is divided into Red,
Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the
sub-pixel color is determined with a 8-bit gray scale signal for each dot, thus, presenting a palette of more than
16,7M colors with Advanced-FRC(Frame Rate Control). It has been designed to apply the interface method
that enables low power, high speed, low EMI. FPD Link or compatible must be used as a LVDS(Low Voltage
Differential Signaling) chip. It is intended to support applications where thin thickness, wide viewing angle, low
power are critical factors and graphic displays are important. In combination with the vertical arrangement of
the sub-pixels, the LM230WF5-TLE1 characteristics provide an excellent flat panel display for office automation
products such as monitors.
FIG. 1 Block diagram
LVDS
pair #1
LVDS
pair #2
CN1
(30pin)
+5V
VLCD
Timing
controller
Power circuit
block
RGB
Source driver circuit
S1
G1
TFT-LCD Panel
(1920ÝRGBÝ1080 pixels)
G1080
Backlight assembly (Single LED Bar)
FB 2ch
General features
Active screen size 23 inches(58.42cm) diagonal(Aspect ratio 16:9)
Outline Dimension 533.2(H) x 312.0(V) x 10.2(D) mm(Typ.)
S1920
Pixel Pitch 0.265mm x 0.265mm
Pixel Format 1920 horizontal By 1080 vertical Pixels. RGB stripe arrangement
Interface LVDS 2Port
Color depth 16.7M colors
Luminance, white 250 cd/m
2
( Center 1Point, typ)
Viewing Angle (CR>10) R/L 170(Typ.), U/D 160(Typ.)
Power Consumption
Total 19.82W (Typ.), ( 6.0 W@V
, 13.82 W@W/O_Driver)
LCD
Weight 2100 g (Typ.)
Display operating mode Transmissive mode, normally White
Surface treatments Hard coating (3H), Glare treatment of the front polarizer
Ver. 1.0 Sov. 26, 2010 4/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
2. Absolute maximum ratings
The following are maximum values which, if exceeded,
may cause faulty operation or damage to the unit.
Table 1. Absolute maximum ratings
LM230WF5
Liquid Crystal Display
Parameter Symbol
Values
Min Max
Power Supply Input Voltage V
Operating Temperature T
Storage Temperature T
Operating Ambient Humidity H
Storage Humidity H
LCD
OP
ST
OP
ST
-0.3 +6.0 Vdc At 25
050¶C
-20 60 ¶C
10 90 %RH
10 90 %RH
Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 ¶C Max, and no condensation of water.
2. Maximum Storage Humidity is up to 40, 90% RH only for 4 corner light leakage Mura.
3. Storage condition is guaranteed under packing condition.
FIG. 2 Temperature and relative humidity
90%
60
Units Notes
1,2,3
Wet Bulb
Temperature []
10
0
10 20 30 40 50 60 70 800-20
Dry Bulb Temperature []
20
30
40
50
60%
40%
10%
Storage
Operati on
Humidity [(%)RH]
Ver. 1.0 Sov. 26, 2010 5/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
3. Electrical specifications
3-1. Electrical characteristics
It requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and
liquid crystal. The second input power for the LED/Backlight, is typically generated by a Driver. The LED
driver is an external unit to the LCDs.
Table 2. Electrical characteristics
Parameter Symbol
Unit Notes
Min Typ Max
MODULE :
Values
Power Supply Input Voltage V
Permissive Power Input Ripple V
I
Power Supply Input Current
LCD-MOSAIC
I
LCD-BLACK
Power Consumption P
Inrush current I
LCD
LCD
LCD
RUSH
4.5 5.0 5.5 Vdc
--0.4 V3
- 1200 1380 mA 1
- 1400 1600 mA 2
- 6.0 6.90 Watt 1
--3.0 A4
Note :
1. The specified current and power consumption are
under the V
whereas mosaic pattern(8 x 6) is displayed and f
LCD=5.0V, 25 r 2¶C,f
=60Hz condition
V
is the frame frequency.
V
2. The current is specified at the maximum current pattern.
3. Permissive power ripple should be measured under VCC=5.0V, 25¶C, fV(frame frequency)=75Hz
condition and At that time, we recommend the bandwidth configuration of oscilloscope
is to be under 20MHz.
4. The duration of rush current is about 2ms and rising time of power Input is 500us r 20%.
FIG.3 pattern for Electrical characteristics
power consumption measurement
power input ripple
White : 255Gray
Black : 0Gray
Mosaic Pattern(8 x 6)
Ver. 1.0 Sov. 26, 2010 6/ 30
Full Black Pattern
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
Table 3. LED bar Electrical characteristics
Parameter Symbol Condition
LED : 1,7
LED String Current Is - 120 125 mA 2,7
LED String Voltage Vs 54.0 57.6 61.2 V 3,7
LM230WF5
Liquid Crystal Display
Values
Unit Notes
Min. Typ. Max.
Power Consumption
LED Life Time LED_LT 30,000 - - Hrs 5,7
PBar 12.96 13.82 14.69 Watt 4,6,7
LED driver design guide
: The design of the LED driver must have specifications for the LED in LCD Assembly.
The performance of the LED in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the LED driver.
So all the parameters of an LED driver should be carefully designed and output current should be
Constant current control.
Please control feedback current of each string individually to compensate the current variation
among the strings of LEDs.
When you design or order the LED driver, please make sure unwanted lighting caused by
the mismatch of the LED and the LED driver (no lighting, flicker, etc) never occurs.
When you confirm it, the LCD module should be operated in the same condition as installed in
your instrument.
1. Specified values are for a single LED bar.
2. The specified current is input LED chip 100% duty current.
3. The specified voltage is input LED string and Bar voltage at typical 120 mA 100% duty current.
4. The specified power consumption is input LED bar power consumption at typical 120 mA 100% duty current.
5. The life is determined as the time at which luminance of the LED is 50% compared to that of initial
value at the typical LED current on condition of continuous operating at 25 r 2¶C.
6. The LED bar power consumption shown above does not include loss of external driver.
The used LED bar current is the LED typical current.
Min Power Consumption is calculated with PBar = Vs(Min.) x Is(Typ.) x Nstring
Max Power Consumption is calculated with PBar = Vbar(Max.) x Is(Typ) x Nstring
7. LED operating DC Forward Current must not exceed LED Max Ratings at 25 r 2¶C.
Ver. 1.0 Sov. 26, 2010 7/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
3-2. Interface connections
LCD connector(CN1) : IS100-L30O-C23(UJU), GT103-30S-HF15-ES2500 (LSM)
Mating connector : FI-X30H and FI-X30HL (JAE) or Equivalent
Table 4. Module connector(CN1) pin configuration
LM230WF5
Liquid Crystal Display
Pin No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Symbol Description
RXO0RXO0+
RXO1RXO1+
RXO2-
RXO2+
GND
RXOCRXOC+
RXO3RXO3+
RXE0RXE0+
GND
RXE1-
Minus signal of 1st channel 0 (LVDS)
Plus signal of 1st channel 0 (LVDS)
Minus signal of 1st channel 1 (LVDS)
Plus signal of 1st channel 1 (LVDS)
Minus signal of 1st channel 2 (LVDS)
Plus signal of 1st channel 2 (LVDS)
Ground
Minus signal of 1st clock channel (LVDS)
Plus signal of 1st clock channel (LVDS)
Minus signal of 1st channel 3 (LVDS)
Plus signal of 1st channel 3 (LVDS)
Minus signal of 2nd channel 0 (LVDS)
Plus signal of 2nd channel 0 (LVDS)
Ground
Minus signal of 2nd channel 1 (LVDS)
First Pixel data
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Ver. 1.0 Sov. 26, 2010 8/ 30
RXE1+
GND
RXE2-
RXE2+
RXECRXEC+
RXE3RXE3+
GND
NC
NC
NC
VLCD
VLCD
VLCD
Plus signal of 2nd channel 1 (LVDS)
Ground
Minus signal of 2nd channel 2 (LVDS)
Plus signal of 2nd channel 2 (LVDS)
Minus signal of 2nd clock channel (LVDS)
Plus signal of 2nd clock channel (LVDS)
Minus signal of 2nd channel 3 (LVDS)
Plus signal of 2nd channel 3 (LVDS)
Ground
No Connection (For LCD internal use only.)
No Connection (For LCD internal use only.)
No Connection (For LCD internal use only.)
Power Supply (5.0V)
Power Supply (5.0V)
Power Supply (5.0V)
Second Pixel data
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
FIG. 4 Connector diagram
1’st signal pairs
www.panelook.com
Product Specification
IS100-L30O-C23(UJU)
#
1
#1 #30
2’nd signal pairs
CN1
#30
Power(+5V)
LM230WF5
Liquid Crystal Display
Note:
Rear view of LCM
1. NC: No Connection.
2. All GND(ground) pins should be connected together and to Vss which should also
be connected to the LCD’s metal frame.
3. All V
(power input) pins should be connected together.
LCD
4. Input Level of LVDS signal is based on the IEA 664 Standard.
Ver. 1.0 Sov. 26, 2010 9/ 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
The LED interface connector is a model 10019HR-H06B manufactured by YEONHO.
The pin configuration for the connector is shown in the table below.
Table 5. LED connector pin configuration
Pin Symbol Description Notes
1 FB1 Channel1 Current Feed Back
2NC NC
3 Vled1 LED Power Supply
LM230WF5
Liquid Crystal Display
4 Vled1 LED Power Supply
5NC NC
6 FB2 Channel2 Current Feed Back
FIG. 5 Backlight connector view
PCB
6
…
1
Ver. 1.0 Sov. 26, 2010 10 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
3-3. LVDS characteristics
3-3-1. DC Specification
LVDS -
LVDS +
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
|VID|
V
# |VID| = |(LVDS+) ˀ (LVDS-)|
# V
= {(LVDS+) + (LVDS-)}/2
CM
0V
CM
V
V
IN_MAX
IN_MIN
Description Symbol Min Max Unit Notes
LVDS Differential Voltage |VID| 200 600 mV -
LVDS Common mode Voltage V
LVDS Input Voltage Range V
CM
IN
0.6 1.8 V -
0.3 2.1 V -
3-3-2. AC Specification
T
clk
LVDS Clock
LVDS Data
(
F
t
SKEW
t
SKEW
1 ) 85MHz >Fclk ≥65MHz : -350 ~ + 350
2 ) 65MHz >Fclk ≥25MHz : -600 ~ + 600
clk
=1 /T
clk
)
Description Symbol Min Max Unit Notes
LVDS Clock to Data Skew Margin
LVDS Clock to Clock Skew Margin (Even
to Odd)
t
SKEW
t
SKEW
t
SKEW_EO
- 350 + 350 ps
- 600 + 600 ps
-1/7 + 1/7 T
clk
Ver. 1.0 Sov. 26, 2010 11 / 30
85MHz > Fclk ≥ 65MHz
65MHz > Fclk ≥ 25MHz
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
-
www.panelook.com
Page 12
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
t
SKEW_EO
LM230WF5
Liquid Crystal Display
LVDS Odd Clock
LVDS Even Clock
LVDS Even Data
3-3-3. LVDS Data format
RCLK +
RXinO0 +/-
RXinO1 +/-
RXinO2 +/-
RXinO3 +/-
RXinE 0 +/-
RXinE 1 +/-
OR3 OR2 OR1 OR0
OG4 OG3 OG2 OG1
OB5 OB4 OB3 OB2
OG7 OG6 OR7 OR6
ER3 ER2 ER1 ER0
EG4 EG3 EG2 EG1
T
clk
T
clk
< Clock skew margin between channel >
Tclk
Tclk * 4/7 Tclk * 3/7
Tclk * 1/7
OG0 OR5 OR4 OR3 OR2 OR1 OR0
OB1 OB0 OG5 OG4 OG3 OG2 OG1
VSYNC HSYNC
DE
X OB7 OB6 OG7 OG6 OR7 OR6
EG0 ER5 ER4 ER3 ER2 ER1 ER0
EB1 EB0 EG5 EG4 EG3 EG2 EG1
OB5 OB4 OB3 OB2
OG0 OR5 OR4
OB1 OB0 OG5
VSYNC HSYNC
DE
X OB7 OB6
EG0 ER5 ER4
EB1 EB0 EG5
MSB R7
R6
R5
R4
R3
R2
R1
R0LSB
* ODD = 1st Pixel
EVEN = 2nd Pixel
RXinE 2 +/-
RXinE 3 +/-
EB5 EB4 EB3 EB2
EG7 EG6 ER7 ER6
VSYNC HSYNC
DE
X EB7 EB6 EG7 EG6 ER7 ER6
EB5 EB4 EB3 EB2
Current (Nth) CyclePrevious (N -1) th Cycle Next (N+1)
VSYNC HSYNC
DE
X EB7 EB6
th Cycle
< LVDS Data Format >
Ver. 1.0 Sov. 26, 2010 12 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
Table 6. Required signal assignment for Flat Link(NS:DS90CF383) transmitter
Pin # Require SignalPin Name Pin # Require SignalPin Name
1 Power Supply for TTL InputVCC 29 Ground pin for TTLGND
2 TTL Input (R7)D5 30 TTL Input (DE)D26
3 TTL Input (R5)D6 31 TTL Level clock InputTXCLKIN
4 TTL Input (G0)D7 32 Power Down InputPWR DWN
5 Ground pin for TTLGND 33 Ground pin for PLLPLL GND
6 TTL Input (G1)D8 34 Power Supply for PLLPLL VCC
7 TTL Input (G2)D9 35 Ground pin for PLLPLL GND
LM230WF5
Liquid Crystal Display
8 TTL Input (G6)D10 36 Ground pin for LVDSLVDS GND
9 Power Supply for TTL InputVCC 37 Positive LVDS differential data output 3
10 TTL Input (G7)D11 38 Negative LVDS differential data output 3
11 TTL Input (G3)D12 39 Positive LVDS differential clock output
12 TTL Input (G4)D13 40 Negative LVDS differential clock output
13 Ground pin for TTLGND 41 Positive LVDS differential data output 2
14 TTL Input (G5)D14 42 Negative LVDS differential data output 2
15 TTL Input (B0)D15 43 Ground pin for LVDSLVDS GND
16 TTL Input (B6)D16 44 Power Supply for LVDSLVDS VCC
17 Power Supply for TTL InputVCC 45 Positive LVDS differential data output 1
18 TTL Input (B7)D17
19 TTL Input (B1)D18
20 TTL Input (B2)D19
22 TTL Input (B3)D20
46 Negative LVDS differential data output 1
47 Positive LVDS differential data output 0
48 Negative LVDS differential data output 0
49 Ground pin for LVDSLVDS GND21 Ground pin for TTL InputGND
50 TTL Input (R6)D27
TxOUT3ు
TxOUT3ృ
TXCLKOUTు
TXCLKOUTృ
TXOUT2ు
TXOUT2ృ
TXOUT1ు
TXOUT1ృ
TXOUT0ు
TXOUT0ృ
23 TTL Input (B4)D21
24 TTL Input (B5)D22
25 TTL Input (RSVD)D23
26 Power Supply for TTL InputVCC 54 TTL Input (R2)D2
51 TTL Input (R0)D0
52 TTL Input (R1)D1
53 Ground pin for TTLGND
55 TTL Input (R3)D327 TTL Input (HSYNC)D24
56 TTL Input (R4)D428 TTL Input (VSYNC)D25
Notes : 1. Refer to LVDS Transmitter Data Sheet for detail descriptions.
2. 7 means MSB and 0 means LSB at R,G,B pixel data
Ver. 1.0 Sov. 26, 2010 13 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
΅ΒΓΝΖ΅ΚΞΚΟΘΥΒΓΝΖ
ͺ΅Ͷ; ΄ΪΞΓΠΝ ;ΚΟ ΅ΪΡ ;ΒΩ ΆΟΚΥ ͿΠΥΖ
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
3-4 Signal timing specifications
΅ΙΚΤΚΤΥΙΖΤΚΘΟΒΝΥΚΞΚΟΘΣΖΦΚΣΖΕΒΥΥΙΖΚΟΡΦΥΠΗΥΙΖΆΤΖΣΔΠΟΟΖΔΥΠΣͲΝΝΠΗΥΙΖΚΟΥΖΣΗΒΔΖΤΚΘΟΒΝΥΚΞΚΟΘ
ΤΙΠΦΝΕΓΖΤΒΥΚΤΗΚΖΕΨΚΥΙΥΙΖΗΠΝΝΠΨΚΟΘΤΡΖΔΚΗΚΔΒΥΚΠΟΤΗΠΣΚΥΤΡΣΠΡΖΣΠΡΖΣΒΥΚΠΟ
͵ʹͽͼ
ΤΪΟΔ
·ΤΪΟΔ
ΖΣΚΠΕ Υʹͽͼ
ͷΣΖΦΖΟΔΪ
ΖΣΚΠΕ Υ
ΠΣΚΫΠΟΥΒΝ·ΒΝΚΕ Υ·
ΠΣΚΫΠΟΥΒΝͳΝΒΟΜ Υͳ
ͷΣΖΦΖΟΔΪ Η
ΈΚΕΥΙ ΥΈ
ΠΣΚΫΠΟΥΒΝͳΒΔΜΠΣΔΙ Υͳ
ΠΣΚΫΠΟΥΒΝͷΣΠΟΥΠΣΔΙ Υͷ
ΖΣΚΠΕ Υ·
·ΖΣΥΚΔΒΝ·ΒΝΚΕ Υ··
·ΖΣΥΚΔΒΝͳΝΒΟΜ Υ·ͳ
ͷΣΖΦΖΟΔΪ Η·
ΟΤ
;Ϋ
Υʹͽͼ
Υʹͽͼ
ͼΫ
Υʹͽͼ
Υ
Υ
Υ
Ϋ
ΈΚΕΥΙ ΥΈ·
·ΖΣΥΚΔΒΝͳΒΔΜΠΣΔΙ Υ·ͳ
·ΖΣΥΚΔΒΝͷΣΠΟΥΠΣΔΙ Υ·ͷ
Note: Hsync period and Hsync width-active should be even number times of t
times of t
CLK, display control signal can be asynchronous. In order to operate this LCM a Hsync,
Υ
CLK. If the value is odd number
Vsyn, and DE(data enable) signals should be used.
1. The performance of the electro-optical characteristics may be influenced by variance of the vertical
refresh rates.
2. Vsync and Hsync should be keep the above specification.
3. Hsync Period, Hsync Width, and Horizontal Back Porch should be any times of of character
number(4).
4. The polarity of Hsync, Vsync is not restricted.
5. The Max frequency of 1920X1080 resolution is 82.5Mhz
Ver. 1.0 Sov. 26, 2010 14 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
3-5. Signal timing waveforms
1. DCLK , DE, DATA waveforms
t
CLK
Clk
tad thud
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
Valid
Invalid
Data
DE(Data Enable)
2. Horizontal waveform
DE(Data Enable)
3. Vertical waveform
Invalid
tsar this
th
tHV
DE
top
tVV
DE(Data Enable)
Ver. 1.0 Sov. 26, 2010 15 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
DE
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
3-6. Color input data reference
The brightness of each primary color (red,green and blue) is based on the 8bit gray scale data input for the
color ; the higher the binary input, the brighter the color. The table below provides a reference for color versus
data input.
Table 8. Color data reference
Input Color Data
Basic
Color
Red
Color
Black
Red (255)
Green (255)
Blue (255)
Cyan
Magenta
Yellow
White
Red(000) Dark
Red(001)
Red(002)
---------
--------Red(253)
Red(254)
Red(255) Bright
Red
MSB LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1
1
1
1
1
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MSB LSB
0
0
0
1
0
0
0
1
1
0
0
0
0
1
1
1
0
0
1
1
1
1
1
1
0
0
0
1
0
0
0
0
0
-
-
-
-
1
0
0
0
0
0
1
0
0
Green
Blue
MSB LSB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Green(000) Dark
Green(001)
Green(002)
Green
Blue
---------
---------
Green(253)
Green(254)
Green(255)Bright
Blue(000) Dark
Blue(001)
Blue(002)
---------
--------Blue(253)
Blue(254)
Blue(255) Bright
Ver. 1.0 Sov. 26, 2010 16 / 30
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
-
0
0
0
0
0
0
0
0
0
-
-
-
-
0
0
0
0
0
0
-
-
-
0
1
1
0
1
1
0
0
0
0
0
0
-
-
-
-
0
0
0
0
0
0
0
-
-
-
-
0
0
0
0
0
0
0
0
0
0
0
0
-
-
-
-
1
1
1
1
1
1
0
0
0
-
-
-
-
0
0
0
0
0
0
0
0
0
0
0
0
-
-
-
-
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
-
-
-
-
-
-
-
-
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
1
0
-
-
-
-
-
-
-
-
1
1
0
1
1
1
1
0
1
1
1
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
3-7. Power sequence
LCD
V
Power Supply For LCD
Interface Signal (Tx)
www.panelook.com
Product Specification
90% 90%
10%
T2 T5 T7
T1
Valid data
LM230WF5
Liquid Crystal Display
10%
Power Supply for LED
Table 9. Power sequence
Parameter
T1 0.5 - 10 ms
T2 0.01 - 50 ms
T3 500 - - ms
T4 200 - - ms
T5 0.01 - 50 ms
0V
LED OFF
Min Typ Max
T3
LED on
Values
T4
LED OFF
Units
T7 1 - - s
Notes :
1. Please V
power on only after connecting interface cable to LCD.
LCD
2. Please avoid floating state of interface signal at invalid period.
3. When the interface signal is invalid, be sure to pull down the power supply for
LCD V
LCD
to 0V.
4. LED power must be turn on after power supply for LCD an interface signal are valid.
Ver. 1.0 Sov. 26, 2010 17 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
3-8. V
Power dip condition
LCD
FIG. 6 Power dip condition
1) Dip condition
V
LCD
4.5V
3.5V
GND(ground)
t
d
2) V
3.5V ≤V
3.5V
LCD
-dip conditions should also follow the Power On/Off conditions for supply voltage.
V
LCD
4.5V , td≤20ms
LCD
Ver. 1.0 Sov. 26, 2010 18 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
4. Optical specification
Optical characteristics are determined after the unit has been ‘ON’ for approximately 30 minutes
in a dark environment at 25·2¶C. The values specified are at an approximate distance 50cm from the LCD
surface at a viewing angle of ) and T equal to 0 ¶ and aperture 1 degree.
FIG. 7 presents additional information concerning the measurement equipment and method.
FIG. 7 Optical characteristic measurement equipment and method
LCD Module
Optical Stage(x,y)
Pritchard 880 or
equivalent
50cm
Table 10. Optical characteristics
Parameter Symbol
Contrast Ratio CR 700 1000 - 1
Surface Luminance, white L
Luminance Variation
Response Time
Color Coordinates
[CIE1931]
(By PR650)
Viewing Angle (CR>5)
x axis, right(I=0¶) Tr
x axis, left (I=180¶) Tl
y axis, up (I=90¶) Tu
y axis, down (I=270¶) Td
Viewing Angle (CR>10)
x axis, right(I=0¶) Tr
x axis, left (I=180¶) Tl
y axis, up (I=90¶) Tu
y axis, down (I=270¶) Td
Rise Time Tr
Decay Time Tr
RED
GREEN
BLUE
WHITE
WH
G
WHITE
9P 75 % 3
R
D
Rx
Ry 0.333
Gx 0.303
Gy 0.626
Bx 0.153
By 0.070
Wx 0.313
Wy 0.329
Ta= 25¶C, V
Min Typ Max
200 250 - cd/m
-1.32.6ms4
-3.77.4ms4
Typ
-0.03
75 88 Degree 5
75 88
70 85
70 85
70 85 Degree 5
70 85
60 75
70 85
=5.0V, fV=60Hz f
LCD
Values
0.636
Typ
+0.03
=119MHz, I
CLK
Units Notes
2
=120mA
BL
2
Crosstalk 1.5 % 7
Ver. 1.0 Sov. 26, 2010 19 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
Notes :
1. Contrast ratio(CR) is defined mathematically as :It is measured at center point(1)
LM230WF5
Liquid Crystal Display
Contrast ratio =
Surface luminance with all white pixels
Surface luminance with all black pixels
2. Surface luminance is the luminance value at center 1 point(1) across
the LCD surface 50cm from the surface with all pixels displaying white.
For more information see FIG 8.
3. The variation in surface luminance , G
is defined as
WHITE
Minimum (P1,P2 …..P9)
G
WHITE
= --------------------------------------------- *100
Maximum (P1,P2 …..P9)
For more information see Figure 8.
FIG. 8 Luminance measuring point
<Measuring point for luminance variation> <Measuring point for surface luminance>
H/2
H
H/10
H/2
H
V/2
V
V/10
56
7
Active Area
3
1
8
H : 509.184 mm
42
9
V/2
V
V : 286.416 mm
@ H,V : Active Area
Ver. 1.0 Sov. 26, 2010 20 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
Notes :
4. Response time is the time required for the display to transition from black to white
(Decay Time, Tr
The sampling rate is 2,500 sample/sec. For additional information see FIG. 9.
The response time is defined as the following figure and shall be measured by
switching the input signal for each gray to gray.
FIG. 9 Response time
) and from white to black (Rise Time, TrR)
D
LM230WF5
Liquid Crystal Display
Tr
R
Tr
D
100
90
Optical
white black white
response
[%]
10
0
5. Viewing angle is the angle at which the contrast ratio is greater than 10 or 5. The angles are
determined for the horizontal or x axis and the vertical or y axis with respect to the z axis
which is normal to the LCD surface. For more information see FIG. 10 .
FIG. 10 Viewing angle
<Dimension of viewing angle range>
I
= 180q, Left
Normal
T
E
Y
I
= 90q, Up
I
I
= 0q, Right
I
= 270q, Down
Ver. 1.0 Sov. 26, 2010 21 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
Notes :
6. Gray scale specification
Table 11. Gray scale
Gray level Luminance [%] (Typ)
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
L0
L31
L63
L95
L127
L159
L191
L223
L255
7. The equation of crosstalk : (~L
(~L
0.1
1.10
4.83
12.25
23.45
37.30
54.55
76.00
100
A[or C]2-LA[or C]1
B[or D]2-LB[or D]1
~/L
~/L
A[or C]1
B[or D]1
) u100(%) [Vertical],
) u100(%) [Horizontal]
FIG. 11 Crosstalk
(Half gray: gray 127)
A/2
B
L
B1
Pattern 1
L
A1
L
C1
A
A/8
L
D1
Pattern 2
(Background: gray 127, Rectangular: gray 0, gray255 )
A/4 A/2 A/4
B/8
B/2
L
B2
L
A2
L
D2
L
C2
B/4
B/2
B/4
Ver. 1.0 Sov. 26, 2010 22 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
5. Mechanical characteristics
The contents provide general mechanical characteristics. In addition the figures in the next page are detailed
mechanical drawing of the LCD.
Table 12. Mechanical characteristics
Horizontal 533.2mm
Outline dimension
Bezel area
Active display area
Weight 2100 g (Typ.) 2200 g (Max.)
Surface treatment
Notes : Please refer to a mechanic drawing in terms of tolerance at the next page.
Vertical 312.0mm
Depth 10.2 mm
Horizontal 513.8mm
Vertical 291.0mm
Horizontal 509.184mm
Vertical 286.416mm
Hard coating(3H)
Glare treatment of the front polarizer
Ver. 1.0 Sov. 26, 2010 23 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
< FRONT VIEW >
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
Ver. 1.0 Sov. 26, 2010 24 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
< REAR VIEW >
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
Ver. 1.0 Sov. 26, 2010 25 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 26
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
6. Reliability
Table 13. Environment test conditions
No Test Item Condition
Ta= 60¶C 240hrsHigh temperature storage test1
Ta= -20¶C 240hrsLow temperature storage test2
Ta= 50¶C 50%RH 240hrsHigh temperature operation test3
Ta= 0¶C 240hrsLow temperature operation test4
Wave form : random
5
Vibration test
(non-operating)
Vibration level : 1.0GRMS
Bandwidth : 10-300Hz
Duration : X,Y,Z, 10 min
One time each direction
LM230WF5
Liquid Crystal Display
Shock level : 100G
6
7
{ Result evaluation criteria }
There should be no change which might affect the practical display function when the display quality test is
conducted under normal operating condition.
Shock test
(non-operating)
Altitude
operating
storage / shipment
Waveform : half sine wave, 2msec
Direction : ᇹX, ᇹY, ᇹZ
One time each direction
0 - 16,400 feet(5,000m)
0 - 40,000 feet(12,192m)
Ver. 1.0 Sov. 26, 2010 26 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 27
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
7. International Standards
7-1. Safety
a) UL 60950-1, Second Edition, Underwriters Laboratories Inc.
Information Technology Equipment - Safety - Part 1 : General Requirements.
b) CAN/CSA C22.2 No.60950-1-07, Second Edition, Canadian Standards Association.
Information Technology Equipment - Safety - Part 1 : General Requirements.
c) EN 60950-1:2006 + A11:2009, European Committee for Electro technical Standardization (CENELEC).
Information Technology Equipment - Safety - Part 1 : General Requirements.
d) IEC 60950-1:2005, Second Edition, The International Electro technical Commission (IEC).
Information Technology Equipment - Safety - Part 1 : General Requirements.
(Including report of IEC60825-1:2001 clause 8 and clause 9)
Notes
1. Laser (LED Backlight) Information
jGXtGslkGw
plj]W_Y\TXGaGYWWX
lGslkGwGOjGXtP
2. Caution
: LED inside.
Class 1M laser (LEDs) radiation when open.
Do not open while operating.
7-2. EMC
a) ANSI C63.4 “American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.”
American National Standards Institute (ANSI), 2003.
b) CISPR 22 “Information technology equipment – Radio disturbance characteristics – Limit and
methods of measurement." International Special Committee on Radio Interference
(CISPR), 2005.
c) CISPR 13 “Sound and television broadcast receivers and associated equipment – Radio disturbance
characteristics – Limits and method of measurement." International Special Committee on Radio
Interference (CISPR), 2006.
7-3. Environment
a) RoHS, Directive 2002/95/EC of the European Parliament and of the council of 27 January 2003
Ver. 1.0 Sov. 26, 2010 27 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 28
Global LCD Panel Exchange Center
8. Packing
8-1. Designation of lot mark
a) Lot mark
ABCDEFGHI JKLM
A,B,C : Size (Inch) D : Year
E : Month F ~ M : Serial No.
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
Note:
1. Year
Year
Mark
2. Month
Month
Mark
b) Location of lot mark
Serial No. is printed on the label. The label is attached to the backside of the LCD module.
This is subject to change without prior notice.
8-2. Packing form
2006720078200892009
6
Jun
6
Jul
7
Aug9Sep
8
321
200452005
4
Apr5May
4
200320022001
2010
0
Oct
A
Nov
B
DecMarFebJan
C321
a) Package quantity in one box : 11 pcs
b) Box size :
Ver. 1.0 Sov. 26, 2010 28 / 30
355 X 408 X 600
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 29
Global LCD Panel Exchange Center
www.panelook.com
Liquid Crystal Display
Product Specification
9. Precautions
Please pay attention to the followings when you use this TFT LCD module.
9-1. Mounting Precautions
(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is
not applied to the Module. And the case on which a module is mounted should have
sufficient strength so that external force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect
the polarizer. Transparent protective plate should have sufficient strength in order to the
resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because
the former generates corrosive gas of attacking the polarizer at high temperature and the
latter causes circuit break by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder
than HB pencil lead. And please do not rub with dust clothes with chemical treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth.
(Some cosmetics are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft
materials like chamois soaks with petroleum benzene. Normal-hexane is recommended
for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone,
toluene and alcohol because they cause chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer
causes deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
LM230WF5
9-2. Operating precautions
(1) The spike noise causes the mis-operation of circuits. It should be lower than following
voltage : V=·200mV(Over and under shoot voltage)
(2) Response time depends on the temperature.(In lower temperature, it becomes longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes higher.)
And in lower temperature, response time(required time that brightness is stable after
turned on) becomes longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes damage
to polarizer or electrical contacted parts. And after fading condensation, smear or spot will
occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference shall be done by system manufacturers. Grounding and shielding methods
may be important to minimized the interference.
(7) Please do not give any mechanical and/or acoustical impact to LCM. Otherwise, LCM can
not be operated its full characteristics perfectly.
(8) A screw which is fastened up the steels should be a machine screw (if not, it causes metal
foreign material and deal LCM a fatal blow)
(9) Please do not set LCD on its edge.
Ver. 1.0 Sov. 26, 2010 29 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 30
Global LCD Panel Exchange Center
www.panelook.com
LM230WF5
Liquid Crystal Display
Product Specification
9-3. Electrostatic discharge control
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.
9-4. Precautions for strong light exposure
Strong light exposure causes degradation of polarizer and color filter.
9-5. Storage
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5¶C and 35¶C at normal humidity.
(2) The polarizer surface should not come in contact with any other object.
It is recommended that they be stored in the container in which they were shipped.
9-6. Handling precautions for protection film
(1) The protection film is attached to the bezel with a small masking tape.
When the protection film is peeled off, static electricity is generated between
the film and polarizer. This should be peeled off slowly and carefully by people who are
electrically grounded and with well ion-blown equipment or in such a condition, etc.
(2) When the module with protection film attached is stored for a long time,
sometimes there remains a very small amount of glue still on the bezel
after the protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel surface or
its vestige is recognized, please wipe them off with absorbent cotton waste or
other soft material like chamois soaked with normal-hexane.
Ver. 1.0 Sov. 26, 2010 30 / 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...