LG WM4270HVA, WM4270HWA Owners Manual

ENGLISH

ESPAÑOL

OWNER’S MANUAL

WASHING MACHINE

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

WM4270H*A

MFL68639701

www.lg.com

PRODUCT FEATURES

INVERTER DIRECT-DRIVE MOTOR

The inverter direct drive motor, which is directly attached to the drum, is capable of producing multiple distinct different motions for optimal washing performance with very little noise and vibration. The motor assembly also contains fewer moving parts, thus resulting in fewer repairs.

SMART DIAGNOSIS™

Should you experience any technical difficulty with your washing machine, it has the capability of transmitting data by phone to the Customer Information Center. The call center agent records the data transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis (Refer to page 45).

TUB CLEAN

Cleaning of the tub on a regular monthly basis using Tub Clean can help keep the tub clean and fresh.

MAGNETIC DOOR PLUNGER

Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed, do not close the door completely. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.

LARGE CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.

CHILD LOCK

Use this option to disable the controls during a wash cycle. This option can prevent children from changing cycles or operating the machine.

DETERGENT DISPENSER DRAWER

The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, main laundry detergent, liquid bleach, and fabric softener into different compartments.

HIGH TEMPERATURE STEAM CYCLES

LG's unique, high-temperature steam cycles help to remove tough stains.

TAG ON

The Tag On feature works on most NFC equipped smart phones by communicating with your Tag On equipped LG appliance. Using the LG Smart Laundry application, the Tag On feature allows you to diagnose your appliance, download new cycles, and see the status of your appliance by simply touching the smart phone to the Tag On logo of the appliance.

TABLE OF CONTENTS

ENGLISH

2 PRODUCT FEATURES

IMPORTANT SAFETY INSTRUCTIONS

INTRODUCING YOUR WASHING MACHINE

8 Parts and Accessories

9 Control panel features

11 INSTALLATION INSTRUCTIONS

11 Preview installation order 12 Checking and choosing the proper location 13 Unpacking and removing shipping bolts 14 Connecting the water lines 15 Connecting the drain line 16 Leveling the washing machine 17 Plugging in the power cord and grounding 17 Test run

18 PREPARATION

18 Sorting wash loads 18 - Precautions for fabric care before wash cycle 19 - Fabric care labels 19 - Sorting laundry 20 Using detergent/fabric softener 20 - Recommended detergent 20 - Loading the dispenser

22 USING YOUR WASHING MACHINE

22 Basic operation 23 Cycle guide 24 Main cycle 24 - Reduce laundry allergen, 24 - Reduce laundry bacteria, Sanitary 24 - White fabrics, Bright Whites™ 24 - Blankets or bulky items, Bulky/Large 24 - Normal items, Cotton/Normal 24 - Heavily soiled items, Heavy Duty 24 - Wrinkle free items, Perm.Press 24 - Items labeled wool or hand-washable, Hand

Wash/Wool

24 - Sheer items, Delicates 24 - For towels, Towels 24 - Quick wash, Speed Wash 24 - Drain and spin only, Drain+Spin 25 Cycle modifier buttons 25 Setting options before the cycle 25 - Setting the water temperature, Wash Temp. 25 - Setting the spin speed, Spin Speed

Allergiene™

25 - Setting soil level of laundry, Soil Level 26 - Adjusting the melody and button tones, Signal 26 - Prewashing, Pre Wash 26 - Rinse, drain and spin only, Rinse+Spin 26 - Adding an extra rinse cycle, Extra Rinse 26 - Presetting the start time, Delay Wash 26 - Efficiently cleaning, Steam 27 - Saving energy, Cold Wash™ 27 - Saving time, Turbo Wash™ 27 Setting options during the cycle 27 - Button lock feature, Child Lock 28 - Saving customized wash cycle, PGM Save 28 - Selecting your customized cycle, Custom PGM 28 -

Tumbling clothes to prevent Wrinkles, Fresh Care

28 - Drum Lighting, Drum Light 29 Before using the Tag On function 29 - To Use the Tag On Function 29 - The Tag On guide 30 Tag On

36 MAINTENANCE

36 Care 36 - Care after wash 36 - Care in cold climates 37 Cleaning 37 - Cleaning the drum, Tub Clean 38 - Cleaning the detergent dispenser drawer 39 - Cleaning the water inlet filters 40 - Cleaning the drain pump filter 41 - Cleaning the door seal

42 TROUBLESHOOTING

42 Checking error messages 43 Before calling for service

44 SPECIFICATIONS

45 USING SMART DIAGNOSIS™

46 WARRANTY

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell

you what can happen if the instructions are not followed.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Use this appliance only for its intended purpose as described

in this Owner’s Manual.

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

• Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or discarded,

remove the lid to prevent children from climbing inside.

• Do not install or store the washer where it will be exposed to

the weather or freezing temperatures.

• Do not tamper with controls.

• Keep the area underneath and around your appliances free

of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.

• Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We strongly recommend that any service be performed by a qualified technician.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by the

garment manufacturer.

• Do not place items exposed to cooking oil in your washer.

Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Use fabric softeners or products to eliminate static only as

recommended by the manufacturer.

• This washer is not designed for maritime use or for mobile

installations such as in RVs, aircraft, etc.

• Turn off the water faucets and unplug the washer if the

machine is to be left for an extended period of time, such as during vacations.

• Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.

• Always check the inside of the washer for foreign objects before loading laundry. Keep the lid closed when not in use.

• Do not reach into the appliance if the tub or agitator is

moving.

• WARNING : This product contains chemicals known to the

State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

ENGLISH

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures. Installation instructions are packed with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not, under any circumstances, cut or remove the

third (ground) prong from the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• For personal safety, this appliance must be properly

grounded. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance.

• This washer must be plugged into a 120 V~,60Hz

grounded outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly grounded. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Where a standard 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not install on carpet. Install washer on a solid floor.

Failure to follow this warning can cause serious leak damage.

• Do not remove ground prong. Do not use an adapter

or extension cord. Plug into a grounded 3-prong outlet. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

• The washer should always be plugged into its own

individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

• Never unplug your washer by pulling on the power

cord. Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Repair or immediately replace all power cords that

have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• When installing or moving the washer, be careful not

to pinch, crush, or damage the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• The washer must be installed and electrically

grounded by a qualified service person in accordance with local codes to prevent shock hazard and assure stability during operation.

• The washer is heavy. Two or more people may be

needed to install and move the appliance. Failure to do so can result in back or other injury.

• Store and install the washer where it will not be

exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow this warning can cause serious leak damage.

• To reduce the risk of electric shock, do not install the

washer in humid spaces. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• To reduce the risk of injury to persons, adhere to all

industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

ENGLISH

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

• Unplug the washer before cleaning to avoid the

risk of electric shock.

• Never use harsh chemicals, abrasive cleaners, or

solvents to clean the washer. They will damage the finish.

• Do not put oily or greasy rags or clothing on top of

the washer. These substances give off vapors that could ignite the materials.

• Do not wash items that are soiled with vegetable

or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

• Disconnect this appliance from the power supply

before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not combine laundry products for use in one

load unless specified on the label.

• Do not mix chlorine bleach with ammonia or acids

such as vinegar. Follow package directions when using laundry products. Incorrect usage can produce poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are

moving. Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with these warnings could result in serious injury to persons or death.

• Destroy the carton, plastic bag, and other packing

materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply with these warnings could result in serious injury to persons or death.

• Keep laundry products out of children’s reach. To

prevent injury to persons, observe all warnings on product labels. Failure to comply with these warnings could result in serious injury to persons or death..

• Before your washer is removed from service or

discarded, remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious injury to persons or death.

• Make sure the dispenser drawer is closed at all

times when not being filled with laundry products. Failure to keep the drawer closed can result in personal injury or flooding.

SAVE THESE INSTRUCTIONS

INTRODUCING YOUR WASHING MACHINE

Parts and Accessories

Parts

Detergent dispenser

drawer

(See page 20)

Door

Magnet Door

Plunger

(see page 2)

Control panel (See page 9)

Water inlets

TurboWash™ Upper Nozzle

Door seal

Tub

Shipping

bolts

Power cord

Drain hose

Drain pump filter cover Drain pump filter Drain hose

Leveling feet

Accessories

Included Accessories Optional Accessories

Hot/cold water

hoses

Wrench Tie strap Elbow bracket

Non-skid pads

Caps for covering

shipping bolt holes

(for securing drain

hose)

Pedestal

(sold separately)

Stacking Kit

(sold separately)

NOTE

yContact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are

missing.

yFor your safety and for extended product life, use only authorized components. The manufacturer

is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts.

yThe images in this guide may be different from the actual components and accessories, which are

subject to change by the manufacturer without prior notice for product improvement purposes.

Control panel features

Cycle selector

INTRODUCING YOUR WASHING MACHINE

Operation Display

ENGLISH

Operation

Power Button

Button Description

yTurns the washing machine on and off. y(During the wash cycle) stops operation, and cancels the settings.

yAllergiene™

- For cotton, underwear (see page 24)

ySanitary

- For underwear, diapers, etc. (see page 24)

yHeavy Duty

- For Heavily soiled cotton fabric (see page 24)

yBulky/Large

- For blankets or large bulky items (see page 24)

yCotton/Normal

- For general laundry, such as cotton T-shirts or towels (see page 24)

yBright Whites™

- For white fabrics (see page 24)

yPerm. Press

- For wrinkle-free fabrics (see page 24)

yDelicates

- For sheer and delicate fabrics (see page 24)

y Towels

- For towels (see page 24)

ySpeed Wash

- For small quantities of lightly soiled items (see page 24)

yDownload Cycle

- This position is for downloadable cycles. The default cycle in this position is Small Load. (See page 29)

yTub Clean

- For cleaning the wash tub (see page 37)

yHand Wash/Wool

- For wool or hand-washable fabrics. (see page 24.)

yDrain+Spin

- For items that only require draining and spinning. (see page 24.)

yStarts or pauses the washing machine cycle.

- If you do not press the Start/Pause button within 4 minutes of selecting a cycle, the washing machine will turn off automatically and all settings will be lost.

y(Press repeatedly) Selects the water temperature for the wash cycle (see page 25).

- Select water temperature from 5 settings.

y(Press repeatedly) Selects the spin speed at the desired level (see page 25).

- Select spin speed from 5 settings.

y(Press repeatedly) Selects a wash cycle by soil level (see page 25).

- Select soil level from 5 settings.

y(Press repeatedly) Selects the volume of the button tones and the end of cycle

melody. (see page 26)

Start/ Pause Button

Water Temperature Selection Button

Spin Speed Selection Button

Soil Level Selection Button

Signal Sound Selection Button

INTRODUCING YOUR WASHING MACHINE

Operation (continued)

Button Description

y(Press before wash cycle) Pre-wash heavily soiled laundry (See page 26). y(Press and hold during wash cycle) Activates or cancels Child Lock feature.

(See page 27).

yUse this option to save time (See page 27).

y(Press before wash cycle) Add an extra rinse to the selected cycle. (see page 26.) y(Press and hold during wash cycle) The drum is equipped with a white LED light

that illuminates when the washer is turned on. (see page 28.)

yUse this option to rinse detergent from the load (See page 26)

Display

Display Icon Description

ySet the start time of the wash cycle. (See page 26).

y(Press before starting wash cycle) Use this option to add steam for extra

cleaning power (See page 26)

y(Press and hold before starting wash cycle) Tumbles clothes after cycle

finishes to prevent wrinkles (See page 28)

yUse this option to help reduce energy consumption (See page. 27).

y(Press and hold) Saves the current cycle and settings for use at a later time. y(Press once) Restores the previously saved settings. (See page 27~28)

Door lock indicator

Cycle process indicator

yThis portion of the display shows which stage of the wash cycle is

currently underway (Load Sensing, Wash, Rinse or Spin).

yIndicates that the door is locked. The washer door will lock while the

washer is operating. The door can be unlocked by pressing the Start/ Pause button to stop the washer.

yThis indicator shows that the washer has been set for Delay Wash.

The washer will start automatically after the set delay time has passed.

yWhen the Start/ Pause button is pressed, the washer automatically

detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.

Delay wash indicator

Estimated time remaining/ error message display (See page 42)

INSTALLATION INSTRUCTIONS

Preview installation order

INSTALLATION INSTRUCTIONS

ENGLISH

Checking and choosing

the proper location

Connecting the drain line

Test run

WARNING

yThe washer is heavy! Two or more people are required when moving and unpacking the washer.

Failure to do so can result in back or other injury.

yStore and install the washer where it will not be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

yProperly ground the washer to conform with all governing codes and ordinances. Failure to follow

this warning can cause serious injury, fire, electric shock, or death.

yTo reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow

this warning can cause serious injury, fire, electric shock, or death.

yThe base opening must not be obstructed by carpeting when the washer is installed on a carpeted

floor.

yDo not remove the ground prong. Do not use an adapter or extension cord. Plug into a grounded

3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

Unpacking and removing

shipping bolts

Leveling the washing

machine

Connecting the water line

Plugging in the power

cord and grounding

INSTALLATION INSTRUCTIONS

Checking and choosing the proper location

Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.

Clean the floor before installation.

- Make sure to select solid and smooth ground.

Two or more people are needed for moving and

unpacking the washing machine.

Allow for sufficient space between the walls and

the washing machine for installation.

Space requirements

You must allow sufficient space for water lines, the drain line, and airflow.

NOTE

yBe sure to allow for wall, door, or floor

moldings that may increase the required clearances.

Installing on a floor

/4"

(57 cm)

NOTE

yThe floor must be strong and rigid enough

to support the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a frontloading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.

yBefore installing the washer, make sure

the floor is clean, dry and free of dust, dirt, water and oil so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.

yIf a drip pan must be used, take extra care

to follow the instructions provided with the drip pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.

Installing on a pedestal or stacking kit

293/4"

(75.6 cm)

51"

(129.5 cm)

4" (10 cm)

(2.5 cm)

771/2"

(196.8 cm)

27"

68.6 cm

1" (2.5 cm)

29 3/4"

(75.6 cm)

4" (10 cm)

(2.5 cm)

27"

(68.6 cm)

1" (2.5 cm)

NOTE

yRefer to the instructions packaged with the

optional PEDESTAL or STACKING KIT before installing with a PEDESTAL or a STACKING KIT.

Unpacking and removing shipping bolts

When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base. If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do NOT lay the washer on its front or back.

INSTALLATION INSTRUCTIONS

Starting with the bottom two shipping bolts,

use the wrench (included) to fully loosen all four shipping bolts by turning them counterclockwise. Remove the bolt assemblies by wiggling them slightly while pulling them out.

Retainer

Shipping

bolt

Locate the four hole caps included in the

accessory pack and install them in the shipping bolt holes.

Cap

ENGLISH

NOTE

ySave the bolt assemblies for future use. To

prevent damage to internal components, DO NOT transport the washer without reinstalling the shipping bolts.

y Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.

INSTALLATION INSTRUCTIONS

Connecting the water lines

Check the rubber seals on both ends of the

Hoses.

- Insert a rubber seal into the threaded fittings on both ends of each hose to prevent leaking.

Rubber seal

Water hose (To water inlet on the washing machine)

Connect the water supply hoses to the HOT and

COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.

WARNING

yDo not overtighten. Damage to the coupling

can result.

After connecting the inlet hoses to the water

faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature to make sure you've connected the hoses to the correct faucets.

Rubber seal

Water hose (To faucet)

Connect the hoses to the water inlets tightly

by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.

Cold

water

inlet

WARNING

yDo not overtighten the hoses. Overtightening

can damage the valves resulting in leaking and property damage.

Check for leaks by turning on the faucets.

- If water leaks, check steps 1 to 4 again.

NOTE

yFor your safety, and for extended product

life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts.

yUse new hoses when you install the washing

machine. Do not reuse old hoses. Use only the inlet hoses provided with the washer. LG does not recommend the use of aftermarket hoses.

yPeriodically check the hoses for cracks, leaks

and wear, and replace the hoses every 5 years.

yDo not stretch the water hoses intentionally,

and make sure that they are not crushed by other objects.

yWater supply pressure must be between 14.5

PSI and 142 PSI (100~980 kPa). If the water

supply pressure is more than 116 PSI, a pressure reducing valve must be installed.

yTo provide optimum washing performance the

hot water temperature should be set at 120135°F (48-57°C) and the cold at 60°F (15°C).

Hot water inlet

Connecting the drain line

Secure the drain hose in place to prevent it from moving and leaking.

NOTE

yThe drain hose should be properly secured.

Failure to properly secure the drain hose can result in flooding and malfunction.

yThe end of the drain hose should not be lower

than 29 inches (73.66 cm) or higher than 96 inches (244.8 cm) from the bottom of the washer.

yThe drain must be installed in accordance with

any applicable local codes and regulations.

yMake sure that the water lines are not

stretched, pinched, crushed, or kinked.

Using a standpipe

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

No more than 4 inches (10 cm)

INSTALLATION INSTRUCTIONS

Using a laundry tub

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

No more than 4 inches (10 cm)

Elbow bracket

Hang the end of the drain hose over the side of

the laundry tub.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

ENGLISH

Elbow bracket

Insert the end of the drain hose into the

standpipe.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

INSTALLATION INSTRUCTIONS

Leveling the washing machine

The washer tub of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid.

Check that the washing machine is level.

- Check the precise levelness by rocking the top edges of the washing machine or placing a level on the washing machine. The slope beneath the washing machine must not exceed 1°, and all four leveling feet must rest firmly on the floor.

Turn the lower leveling feet clockwise to level the

washing machine.

- Turning the lower leveling feet clockwise raises the washing machine.

Turn the locknuts counterclockwise and tighten

them when the washing machine is level.

Raise

Level

Tighten all 4 lock

nuts securely

using

the wrench.

1°

Check the washing machine’s levelness again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock.

- If the washing machine rocks, repeat steps 1 to

WARNING

yUsing the washing machine without leveling

it may result in malfunction caused by the production of excess vibration and noise.

yIf you are installing the washing machine

on the optional pedestal, you must adjust the leveling feet on the pedestal to level the washing machine. The washing machine´s leveling feet should be minimized. Turn the locknuts counterclockwise to secure.

yUse the leveling feet only when you level the

washing machine. If you raise the leveling feet unnecessarily, it may cause abnormal vibration of the washing machine.

Using non-skid pads (optional)

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, lay the non-skid pads under the leveling feet and adjust the level.

Clean the floor to attach the non-skid pads.

- Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip.

Adjust the level after placing the washing

machine in the installation area. Place the adhesive side of the non-skid pad on

the floor.

- It is most effective to install the non-skid pads under the front legs. If it is hard to place the pads under the front legs, place them under the back legs.

This side up

Adhesive side

Remove backing

Check the washing machine’s levelness again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.

Plugging in the power cord and grounding

Make sure to ground the washing machine to prevent a short circuit or an electric shock when plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional grounding.

WARNING

yThe power outlet must be within 60 inches (1.5 m)

of either side of the washer.

yThe appliance and outlet must be positioned so

that the plug is easily accessible.

yDo not overload the outlet with more than one

appliance.

yThe outlet must be grounded in accordance with

current wiring codes and regulations.

yA time-delay fuse or circuit breaker is

recommended.

yIt is the personal responsibility and obligation

of the product owner to have a proper outlet installed by a qualified electrician.

yDo not use a worn or damaged power cord or

power plug. Replace or repair it immediately. Failure to do so may result in death, fire, electric shock, or malfunction.

yDo not modify the power cord and take care not to

damage it when installing or moving the washing machine. Failure to do so may result in death, fire,

electric shock, or product malfunction. yMake sure that the washing machine is grounded. yConnect this washing machine to a grounded

outlet conforming to the rating prior to use.

Failure product to do so may result in fire, electric

shock, or product malfunction. yDo not use adaptors or extension cords. The

washing machine should always be plugged

into its own individual electrical outlet which has

a voltage rating that matches the rating plate.

Failure to do so may result in fire, electric shock

or disorder. yDo not damage or cut off the ground prong of

the power cord. Doing so may cause death, fire,

electric shock, or product malfunction.

INSTALLATION INSTRUCTIONS

Test run

Check if the washing machine is properly installed and run a test cycle.

Load the washing machine with 6 pounds of

laundry.

Press A and turn B on the right.

Press to Rinse+Spin.

Press C.

- The wash cycle starts. Check if water is supplied, that the washing

machine does not rock or vibrate excessively, and that it drains well during the spin cycle.

- If water leaks during water supply, see page 14, Connecting the water lines to connect them properly.

- If the washing machine rocks and vibrates excessively, see page 16, Leveling the washing machine to level it again.

- If the drain does not work, see page 15, Connecting the drain line to install the drain line properly.

ENGLISH

PREPARATION

Sorting wash loads

Precautions for fabric care before the wash cycle

Read and observe the following to prevent shrinkage or damage to clothes.

u Check all pockets to make sure that they are

empty.

- Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.

u Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling on other clothes.

u Pretreat heavily stained areas before washing.

- Doing so will produce clean, stain-free results.

u Combine large and small items in a load. Load

large items first.

u Large items should not be more than half of

the total wash load.

u The washer can be fully loaded, but the drum

should not be tightly packed with items.

-The door of the washer should close easily.

u Do not wash single items, except for bulky

items such as blankets. Make sure to wash laundry in similar types of loads.

- Washing a single small item may result in the tub becoming unbalanced, vibrating and making a noise.

u Do not wash waterproof clothes.

- This may cause abnormal vibration, or may cause the load to bounce, which could damage the tub.

u Check if there are any foreign objects in the

door seal and take extra care that clothes do not get caught there.

- Foreign objects in the door seal may stain clothes, and water may leak if clothes get caught in the door seal.

u Wash underwear or small, light items in a

laundry net.

- Small, light items may get caught in the door seal, and a brassiere hook may damage other items or the tub.

u Brush heavy soil, dust, or hair off fabrics before

washing.

- Laundry may not wash clean if there is dirt or sand on the fabrics, or items may be damaged due to particles rubbing against sheer fabrics.

u Wash blankets individually.

- Washing more than one blanket together may produce unsatisfactory results due to tangling or an unbalanced load.

u Always separate fabrics according to their

colors and wash them separately to prevent colors from running.

- Fabrics may be damaged or become stained due to fabric dyes running, or due to foreign objects transferring from one fabric to another.

Fabric care labels

Most articles of clothing feature fabric care labels that include instructions for proper care.

Category Label Directions

Hand Wash Machine Wash, Normal

Cycle Use Permanent Press/

Wrinkle Resistant washing machine setting (which has a cool down or cold spray before the slower spin)

Washing

Water

Temperature

Bleach

symbols

Use Gentle/Delicate washing machine setting (slow agitation and/ or reduced wash time).

Do Not Wash

Do Not Wring

Hot

Warm

Cold/Cool Any Bleach (When

Needed) Only Non-Chlorine

Bleach (When Needed) Do Not Bleach

PREPARATION

ENGLISH

Sorting laundry

It is recommended that you sort laundry into similar loads that are washable in the same cycle. Refer to the following chart for sorting clothes

Colors Whites / Lights / Darks Soil Heavy / Normal / Light Fabric Delicates / Easy Care / Sturdy

Lint Lint Producers / Lint Collectors

Cottons

PREPARATION

Using Detergent/Fabric Softener

Recommended Detergent

Make sure to use HE (High-Efficiency) detergent for front-loading washing machines. HE detergents dissolve more efficiently and produce fewer suds to ensure efficient washing and rinsing. Use the correct amount of detergent as indicated on the detergent packaging.

Specially designed to use only HE (High-Efficiency) detergent

NOTE

yOnly use HE detergents, because using a

regular detergent may produce excessive suds.

yHE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing performance, and help to keep the

interior of your washer clean. yUse less detergent for soft water. yWipe up any spills immediately, as liquids

could damage the finish and the control

panel of the washing machine. yUsing too much detergent can cause a build-

up in the tub resulting in unsatisfactory

performance and machine malfunction. yIf you use a detergent that does not dissolve

easily or a detergent with high viscosity, it

will leave a residue on the tub, which may

not rinse properly.

Loading the Dispenser

The detergent dispenser drawer of the washing machine has a dispenser compartment for each detergent type. Add each detergent to its appropriate compartment.

Pull out the detergent dispenser drawer.

Add each detergent to its appropriate

compartment.

- If you use a liquid detergent, check if the liquid detergent cup is in place.

- If you use a powdered detergent, remove the liquid detergent cup and put the powder in the main wash detergent compartment.

Liquid chlorine bleach compartment

Liquid fabric

Liquid detergent cup

softener compartment

Main wash detergent compartment

Close the detergent dispenser drawer slowly.

- Slamming the detergent dispenser drawer may result in the detergent overflowing into another compartment or pouring into the tub earlier than programmed.

Pre-wash detergent compartment

NOTE

yIt is normal for a small amount of water to

remain in the dispenser compartments at the end of the cycle.

Pre-wash Detergent Compartment

Add liquid or powdered detergent to this compartment when using the Pre-Wash option. Always use HE (High-Efficiency) detergent with your washing machine.

NOTE

yWhen using the pre-wash option, if liquid

detergent is to be used for the main wash, remember to use the liquid detergent cup accessory in the main wash dispenser, to prevent the main wash liquid detergent from being dispensed with the pre-wash detergent.

yThe amount of detergent added for the Pre-

Wash option is 1⁄2 the amount recommended for the main wash cycle. For example, if the main wash cycle requires one measure of detergent, add 1⁄2 measure for the Pre-Wash option.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always use HE (HighEfficiency) detergent with your washing machine. Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup on clothing and the washer. Either powdered or liquid detergent may be used.

NOTE

yLiquid or powdered color-safe bleach may be

added to the main wash compartment with detergent of the same type.

yWhen using liquid detergent, make sure the

liquid detergent cup and insert are in place. Do not exceed the maximum fill line.

yWhen using powdered detergent, remove

the insert and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.

USING YOUR WASHING MACHINE

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.

NOTE

yDo not add powdered or liquid color-safe

bleach to this compartment.

yAlways follow the manufacturer’s

recommendations when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics.

yNever pour undiluted liquid chlorine bleach

directly onto the load or into the drum. Fabric damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.

NOTE

yAlways follow the manufacturer’s

recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes.

yDilute concentrated fabric softeners with

warm water. Do not exceed the maximum fill line.

yNever pour fabric softener directly onto the

load or into the drum.

ENGLISH

USING YOUR WASHING MACHINE

Basic operation

Load the laundry into the washing machine and close the door.

Press A.

- The lights around the cycle selector knob will illuminate and a chime will sound.

Turn B to the desired cycle.

- The proper default option is automatically set according to the wash cycle. See page 23, Cycle guide, for more detailed default options for each cycle.

- See page 24, Main cycle, for details on the wash cycles.

- To change the options, press the option button and select the desired option. See page 25, Setting options before cycle, for more details on options.

- Skip to step 4 to use the default setting without changing the options.

Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser drawer.

- See page 20, Using detergent/fabric softener, for more details on using detergent.

Press C.

- The washing machine will start.

When the melody plays, the wash cycle is finished.

- When the washing cycle is finished, the door will unlock. Open the door and remove the laundry immediately.

- Make sure to check around the door seal when taking out the finished load. Small items may be caught in the door seal.

WARNING

yTo reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

NOTE

yThe front-load washing machine rotates the laundry in a way that allows it to use less water while

still fully saturating your clothing. It is normal to not be able to see water during the wash cycle.

yIf the temperature or the water level inside the machine is too high, the door locks and cannot be

opened. To open the door while washing, use the Rinse + Spin feature.

USING YOUR WASHING MACHINE

Cycle guide

The cycle guide below shows the options and recommended fabric types for each cycle. ● = Available option

CYCLE FABRIC TYPE

Tub Clean This cycle is

Allergiene™ Cotton, underwear,

Sanitary Heavily soiled

Bright Whites™

Bulky/Large Large items such as

Cotton/ Normal

Heavy Duty Heavy soiled Cotton

Perm.Press

Delicates

designed to remove a mildewy

pillow covers, bed sheets, baby wear

underwear, work clothes, diapers, etc.

White Fabrics 66 - 76 Hot

blankets and comforters

Cotton, linen, towels, shirts, sheets, jeans, mixed loads

Fabrics

Dress shirts/pants, wrinkle-free clothing, poly/ cotton blend clothing, tablecloths

Dress shirts/blouses, nylons, sheer or lacy garments

DISPLAY

TIME(MIN)

99 - 132

110 - 120

56 Hot

26 - 53

74 - 131 Hot

33 - 47 Hot

41 Warm

Towels Towels 55 - 65 Hot

Speed Wash Lightly soiled

Hand Wash/ Wool

clothing and small loads

Items labeled “hand-washable”

15 Hot

55 Warm

Drain+Spin Drain, Spin Only 16 Extra High

- Cycle time depends on water pressure, type and amount of load and chosen additional options.

- To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

- If the Turbo Wash™ option is selected, you cannot select “No Spin” as your Spin Speed.

BASIC OPTION (=DEFAULT) ADDITIONAL OPTIONS

Wash

Temp.

Extra Hot



Warm Cold Tap Cold



Warm Cold Tap Cold

Extra Hot Hot



Warm Cold Tap Cold



Warm Cold Tap Cold



Warm Cold Tap Cold



Cold Tap Cold



Warm Cold Tap Cold



Warm Cold Tap Cold



Cold Tap Cold

Extra High High Medium Low No Spin



Extra High High Medium Low No Spin

Medium Low No Spin

Extra High High Medium Low

High Medium Low

Medium Low No Spin

Extra High High Medium Low No Spin

Low No Spin

High Medium Low No Spin

Spin

Speed



Heavy Normal Light



Heavy Normal Light



Heavy Normal Light



Heavy Normal Light

Normal Light

Soil

Pre-

Extra

Level

Wash

Rinse

Steam



   



    



    



     



     



     



    



   



    



   

Cold

Wash™

 

Turbo

Wash™

Fresh

Care



ENGLISH

USING YOUR WASHING MACHINE

Main cycle

You can wash laundry items more thoroughly by selecting the wash cycle that best suits the type of items to be washed. Turn B the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 22, Basic operation, for more details on operating methods.

Reduce laundry allergen,

This cycle is a powerful, high temperature cycle designed specifically to reduce certain allergens.

Allergiene™

NOTE

ySelecting the Allergiene™ cycle

automatically incorporates steam into the wash cycle.

yThe Allergiene™ cycle can significantly

reduce allergens in bedding and clothing.

yThe Allergiene™ cycle helps reduce dust

mite populations and helps reduce allergens.

yDue to the higher energy and temperatures

used, the Allergiene™ cycle is not recommended for wool, silk, leather, or any other delicate or temperature sensitive Items.

Reduce laundry bacteria,

NSF International (formerly the National Sanitation Foundation), certifies that this wash cycle reduces 99.9% of bacteria on laundry through high temperature, when used with powdered detergent.

Sanitization Performance of Residential and Commercial, Family Sized Clothes Washers

For white fabrics,

This cycle is for washing white items only.

Bright Whites™

Blankets or bulky items,

This cycle is for washing blankets or bulky items.

Normal items,

Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.

NOTE

yIf you press A and then C without selecting

another cycle, the washing machine proceeds to Cotton/Normal.

Cotton/Normal

Sanitary

Protocol P172

Bulky/Large

Heavily soiled items,

This cycle is for washing heavily soiled laundry though more powerful tub rotation.

Wrinkle free items,

This cycle is for washing items such as wrinklefree clothes or tablecloths to minimize wrinkles.

Sheer items,

This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.

For towels,

This cycle is for washing towels

Quick wash,

Use the Speed Wash cycle to quickly wash lightly soiled clothing and small loads. For high wash and rinse efficiency, it is recommended to wash small loads of 2-3 lightly soiled garments.

NOTE

yUse very little detergent in this cycle. For

additional rinsing, you can add an extra rinse by using the option button.

Delicates

Towels

Speed Wash

Heavy duty

Perm. Press

Items Labeled Wool or Hand-Washable,

Hand Wash/Wool

This cycle is for washing shrinkable woolen or hand-washable items requiring delicate care. Only wash woolen items that are labeled machine washable or hand-washable.

NOTE

yLaundry weight should be less than 8 pounds

(3.6 kg) to prevent damage to the fabric.

yUse only natural or wool-safe detergent

harmless to fabrics and load 1/2 of the normal amount of detergent.

yThe Hand Wash/Wool cycle uses a gentle

tumble rotation angle and low speed spin for the ultimate fabric care.

Drain and spin only,

This cycle is for draining and spinning without the wash and rinse cycle, or for removing the load from

the washing machine in the middle of the cycle.

Drain+Spin

Cycle modifier buttons

Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.

NOTE

yTo protect your garments, not every wash/

rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details.

Setting options before the cycle

You can select and add the desired optional functions before you start the wash cycle.

Setting the water temperature,

Wash Temp.

The optimum water temperature is set automatically for each cycle. To change the water temperature setting for a cycle, follow the instructions below. Remember to set the appropriate temperature, as specified in the fabric care labels on your clothing.

Press A and turn B to the desired cycle.

Press repeatedly to select the desired

water

- When you press the button, an indicator light

temperature:

for the corresponding selection will turn on in the display.

You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

Press C.

NOTE

yCold rinses use less energy. yYour washer features a heating element to

boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings.

ySelect the water temperature suitable for

the type of load you are washing. Follow the fabric care label for best results.

USING YOUR WASHING MACHINE

Setting spin speed, Spin Speed

Higher spin speeds extract more water from clothes, reducing drying time and saving energy. Some fabrics, such as delicates, require a slower spin speed. To protect your clothing, not all spin speeds are available for all cycles. The optimum spin speeds for each cycle have been set automatically. To change the spin speed for a cycle, follow the instructions below.

Press A and turn B to the desired cycle.

Press repeatedly to select the desired

spin speed.

- When you press the button, an indicator light for the corresponding selection will turn on in the display.

You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

Press C.

NOTE

yThe Spin Speed button also activates the

Drain & Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended. To use Drain & Spin, press the Power button, then press the Spin Speed button repeatedly to select a spin speed. Press the Start/Pause button to begin.

Setting soil level of laundry, Soil Level

You can wash your laundry more thoroughly by setting the proper soil level on the washing machine. The soil level for each cycle has been set automatically. To change the soil level for a cycle, follow the instructions below.

Press A and turn B to the desired cycle.

Press

- When you press the button, an indicator light for the corresponding selection will turn on in the display.

You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

Press C.

repeatedly to select a soil level.

NOTE

yLightly soiled loads may take less time and

heavily soiled loads may add time to the cycle.

ENGLISH

USING YOUR WASHING MACHINE

Adjusting the melody and button tones,

Signal

The washing machine plays a melody when the wash cycle is finished. The buttons make a sound each time a button is pressed. The melody and button tones can be changed or they can be turned off if desired.

1 Press 2 Turn

Press . Adjust the melody and button tones as desired.

4 You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

5 Press

to the desired cycle.

Prewashing, Pre Wash

Pre-wash for 16 minutes when clothes are covered in dirt or dust. This feature is suitable for heavily soiled items.

1 Press

cycle.

2 Press .

- light will turn on.

3 You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

4 Press

and turn B to select the desired

Rinse, drain and spin only, Rinse+Spin

Use this cycle to rinse detergent from the load.

1 Press

cycle.

2 Press 3 You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

4 Pulse

and turn B to select the desired

Adding extra rinse cycle, Extra Rinse

You can add an extra rinse cycle to the default rinse cycle.

1 Press

cycle.

2 Press .

- light will turn on.

3 You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

4 Press

and turn B to select the desired

Presetting the start time, Delay Wash

You can set the desired start time.

1 Press 2 You can now modify other cycle settings and

add options (see page 25-28).

3 Press repeatedly to select the desired

start time.

- The set start time appears on the display

- Each press of the button increases the delay

4 Press

and turn B to the desired cycle.

light will turn on.

panel.

time by one hour, up to 19 hours.

High temperature, Steam

Adding the Steam option to these cycles help to enhance washing performance. By using a hot steam fabrics get the cleaning benefits of a super hot wash.

1 Press

cycle.

2 Press . The washer will automatically

adjust the

3 Set any other desired options. 4 Press

and turn B to select the desired

cycle settings.

WARNING

yDo not touch the door during steam cycles.

The door surface can become very hot. Allow the door lock to release before opening the door.

yDo not attempt to override the door lock

mechanism or reach into the washer during a steam cycle. Steam can cause severe burns.

NOTE

y The steam option cannot be used with all

cycles.

y Steam may not be clearly visible during

the steam cycles. This is normal. Too much steam could damage clothing.

yDo not use steam with delicate fabrics such

as wool, silk, or easily discolored fabrics.

Saving energy, Cold Wash™

Adding the Cold Wash™ option reduces energy usage and provides the same washing performance as a warm water wash. By using six different washing motions (Tumbling, Rolling, Stepping, Scrubbing, Swing, Filtration), fabrics get the cleaning benefits, without the energy usage.

1 Press

cycle.

Press . The washer will automatically

adjust the cycle settings.

Set any other desired options.

Press C.

and turn B to select the desired

NOTE

y When you select the Cold Wash™ option,

wash time will be increased up to 10 minutes.

yFor high wash efficiency, use this option

with less than 8 pounds (3.6 kg) of laundry (approximately 8 thick towels).

USING YOUR WASHING MACHINE

Saving time, Turbo Wash™

Adding the TurboWash™ option reduces cycle time and provides good performance in normal cycle. By using the TurboWash™, We can save the time without sacrificing performance.

Press A and turn B to the desired cycle.

Press . The washer will automatically

adjust the cycle settings.

Set any other desired options.

Press C.

NOTE

y The Turbo Wash option cannot be used with

all cycles.

yTurbo Wash is available in the beginning of

the Cotton/Normal, Heavy Duty and Perm. Press cycles.

Setting options during the cycle

You can add desired options during the wash cycle.

Button lock feature, Child Lock

You can lock the washing machine to prevent children or others from changing the cycle settings by pressing the buttons during the cycle.

To enable child lock

Press and hold for three seconds during the wash cycle.

- When the Child Lock is enabled, a N message

and the remaining wash time are displayed, in turn, on the display panel of the washing machine.

To disable child lock

(When the Child Lock is activated.) Press and hold for three seconds during the wash cycle.

ENGLISH

NOTE

y Child Lock remains active after the cycle

ends. To cancel Child Lock, turn the washer on and then press and hold the PreWash button for three seconds.

USING YOUR WASHING MACHINE

Saving customized wash cycle, PGM Save

You can save a cycle with all the settings and options you use most frequently.

To save cycle

1 Press

cycle.

Modify the cycle settings and add other

options (see pages 25-28), if desired.

Press the Start/Pause button to start the cycle.

Press and hold for three seconds during

the wash cycle.

- The cycle with your preferred settings and

and turn B to select the desired

options is saved.

Selecting your customized cycle,

Custom PGM

You can recall the customized wash cycle you had previously saved.

To recall cycle

Press A after then press .

Press C.

Tumbling clothes to prevent wrinkles, Fresh

Care

Use this function when you are not able to take out your clothes as soon as the wash cycle ends.

Press A and turn B to select the desired

cycle.

Press and hold for three seconds

during the wash cycle.

- The light will turn on.

You can now modify other cycle settings and

add options (see page 25-28), or proceed to step 4 to begin the cycle.

Press C.

NOTE

y This function provides periodic tumbling for

up to about 19 hours to prevent wrinkles. If you press the START/ PAUSE or ON/ OFF button, you can unload your laundry at any time.

Drum Lighting, Drum Light

The drum is equipped with a white LED light that illuminates when the washer is turned on. This light automatically turns off when the door is closed and the cycle starts. To turn on the light during a cycle:

Press the Power button and turn the cycle

selector knob in either direction to select the desired cycle. Press the Start/Pause button.

Press and hold the Extra Rinse button for three

seconds during the wash cycle.

- The drum light will illuminate and then turn off automatically after four minutes.

- It is normal for clothing and the gasket to appear yellow under the LED light.

Before using the Tag On function

The Tag On function allows you to conveniently use the LG Smart Diagnosis™, Cycle Download, and Laundry Stats features to communicate with your appliance right from your own smart phone.

1 Download the LG Smart Laundry&DW App to

your smart phone.

2 Turn on the NFC (Near Field Communication)

function in your smart phone.

The Tag On function can be used with most smart phones equipped with the NFC function and based on the Android operating system (OS).

Turning on the NFC function of the smart phone

1 Enter the "Settings" menu

of the smart phone and select "Share & Connect" under "WIRELESS &

NETWORKS”.

USING YOUR WASHING MACHINE

NOTE

y Depending on the smart phone manufacturer

and Android OS version, the NFC activation process may differ. Refer to the manual of your smart phone for details.

The Tag On icon

Look for the Tag On icon next to the LED

screen on the control panel. This is where you position your smart phone when using the Tag On function with the LG Smart Diagnosis™, Cycle Download, and Laundry Stats features of the LG Smart Laundry&DW application.

Tag On position

ENGLISH

2 Set "NFC“ and “Direct

Android Beam” to ON and select “NFC“.

3 Check "Use Read and Write/

P2P receive”.

When you use the Tag On function, position your smart phone so that the NFC antenna on the back of your smart phone matches the position of the Tag On icon on the appliance. If you do not know the position of your NFC antenna, move your smart phone very slightly in a circular motion until the application verifies the connection.

Because of the characteristics of NFC, if the transmission distance is too far, or if there is a metal sticker or a thick case on the phone, transmission will not be good. In some cases, NFC-equipped phones may be unable to transmit successfully.

Press [ ] in the LG Smart Laundry&DW app for a more detailed guide on how to use the Tag On function.

+ 67 hidden pages

LG WM4270HVA, WM4270HWA Owners Manual

Specifications and Main Features

Frequently Asked Questions

User Manual