LG WM3997HWA/01 Owner’s Manual

OWNER’S MANUAL

WASHING MACHINE

ENGLISH

ESPAÑOL

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

WM3997H*A

MFL67737658 Rev.20_062118

www.lg.com

TABLE OF CONTENTS

3 PRODUCT FEATURES

4 IMPORTANT SAFETY INSTRUCTIONS

4 BASIC SAFETY PRECAUTIONS 5 GROUNDING INSTRUCTIONS

SAFETY INSTRUCTIONS FOR INSTALLATION

6 7 SAFETY INSTRUCTIONS FOR USE, CARE,

CLEANING, AND DISPOSAL

INTRODUCING YOUR WASHING MACHINE

8 Parts and Accessories 9 Control panel features

11 INSTALLATION INSTRUCTIONS

11 Preview installation order 12 Checking and choosing the proper location 13 Unpacking and removing shipping bolts 14 Connecting the water lines 15 Connecting the drain line 16 Leveling the washing machine 17 Plugging in the power cord and grounding 17 Test run

18 PREPARATION

18 Sorting wash loads 18 - Precautions for fabric care before wash cycle 19 - Fabric care labels 19 - Sorting laundry 20 Using detergent/fabric softener 20 - Recommended detergent 20 - Loading the dispenser

22 USING YOUR WASHING MACHINE

22 Basic operation 23 Cycle guide 24 Main cycle 24 - Reduce laundry allergens, Allergiene™ 24 - Reduce laundry bacteria, Sanitary 24 - For white fabrics, Bright Whites™ 24 - Blankets or bulky items, Bulky/Large 24 - Heavily soiled items, Heavy Duty 24 - Normal items, Cotton/Normal 24 - For towels, Towels 24 - Wrinkle free items, Perm. Press 24 - Items labeled wool or hand-washable, Hand

Wash/Wool

24 - Sheer items, Delicates 24 - Quick wash, Speed Wash 24 - For a few items, Small Load

24 - Drain and spin only, Drain+Spin 25 Cycle modifier buttons 25 Setting options before the cycle 25 - Setting the water temperature, Wash Temp. 25 - Setting spin speed, Spin Speed 25 - Setting soil level of laundry, Soil Level 26 - Set the drying time, Dry 26 - Prewashing, Pre Wash 26 - Rinse, drain and spin only, Rinse + Spin 27 - Adding extra rinse cycle, Extra Rinse 27 - Presetting the start time, Delay Wash 27 - High temperature, Steam 27 - Saving energy, Cold Wash™ 27 - Saving time, Turbo Wash™ 28 Setting options during the cycle 28 - Button lock feature, Child Lock 28 - Saving a customized wash cycle, PGM Save

Selecting your customized cycle, Custom PGM

28 28 -

Tumbling clothes to prevent Wrinkles, Fresh Care

28 -

Drum Lighting, Drum Light

29 MAINTENANCE

29 Care 29 - Care after wash 29 - Care in cold climates 30 Cleaning 30 - Cleaning the drum, Tub Clean 31 - Cleaning the detergent dispenser drawer 32 - Cleaning the water inlet filters 33 - Cleaning the drain pump filter 33 - Cleaning the door seal

34 TROUBLESHOOTING

34 Checking error messages 35 Before calling for service

36 SPECIFICATIONS

37 SMART DIAGNOSIS™ FUNCTION

38 WARRANTY

PRODUCT FEATURES

INVERTER DIRECT-DRIVE MOTOR

The inverter direct drive motor, which is directly connected to the drum, is capable of producing multiple distinct motions for optimal wash performance with very little noise and vibration. The motor assembly also contains fewer moving parts, resulting in fewer repairs.

Smart Diagnosis™

Should you experience any technical difficulty with your washing machine, it has the capability of transmitting diagnostic data to your smart phone via a free app or directly to the Customer Information Center for quick and efficient troubleshooting (refer to page 37).

TUB CLEAN

Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.

MAGNETIC DOOR PLUNGER

Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry. To use this feature, remove the clean laundry then position the door so that the door is almost closed. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.

LARGE CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.

CHILD LOCK

Use this option to disable the controls during a wash cycle. This option can prevent children from changing cycles or operating the machine.

ENGLISH

DETERGENT DISPENSER DRAWER

The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main laundry detergent, liquid bleach, and fabric softener into different compartments and will be dispensed automatically at the appropriate time.

HIGH TEMPERATURE STEAM CYCLES

During LG’s unique high-temperature steam cycles, the hot steam helps to remove tough stains.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following :

• Use this appliance only for its intended purpose as

described in this owner’s manual.

• Before use, the washer must be properly installed as described in this manual.

• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite

or explode.

• Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water.

These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used

for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or discarded, remove the lid to prevent children from climbing inside.

• Do not install or store the washer where it will be exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Keep the area underneath and around your

appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.

• Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We strongly recommend that any service be

performed by a qualified technician.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by

the garment manufacturer.

• Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a load to catch fire.

• Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging from children.

• Always check the inside of the washer for foreign objects before loading laundry. Keep the lid closed when not in use.

• Do not reach into the appliance if the tub or agitator is moving.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following :

• Refer to the INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation

instructions are packed with the washer for the installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• For personal safety, this appliance must be properly grounded. Failure to follow this warning

can cause serious injury, fire, electric shock, or death.

• The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to

minimize the possibility of electric shock from this appliance.

• This washer must be plugged into a 120 VAC, 60 Hz grounded outlet. Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

• Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Failure to follow this warning

can cause serious injury, fire, electric shock, or death.

• Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, fire, electric shock, or death.

• Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause

serious leak damage.

• Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow these warnings

can cause serious injury, fire, electric shock, or death.

• The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides

the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

• Never unplug your washer by pulling on the power cord. Always grip the plug firmly and pull

straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure to

follow this warning can cause serious injury, fire, electric shock, or death.

• When installing or moving the washer, be careful not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to prevent shock

hazard and assure stability during operation.

• The washer is heavy. Two or more people may be needed to install and move the appliance. Failure

to do so can result in back or other injury.

• Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

• To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

• To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety

warnings in this manual could result in property damage, injury to persons or death.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following :

• Unplug the washer before cleaning to avoid the

risk of electric shock.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage

the finish.

• Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors

that could ignite the materials.

• Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil

after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.

• Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

• Do not combine laundry products for use in one load unless specified on the label.

• Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products. Incorrect usage can

produce poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning

can cause serious injury, fire, electric shock, or death.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with these

warnings could result in serious injury to persons or death.

• Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply with these

warnings could result in serious injury to persons or death.

• Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels. Failure to comply with these

warnings could result in serious injury to persons or death.

• Before your washer is removed from service or discarded, remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside Failure to do

so can result in serious injury to persons or death.

• Make sure the dispenser drawer is closed at all times when not being filled with laundry products.

Failure to keep the drawer closed can result in personal injury or flooding.

ENGLISH

SAVE THESE INSTRUCTIONS

INTRODUCING YOUR WASHING MACHINE

Parts and Accessories

Parts

Detergent

dispenser

drawer

(See page 20)

Control panel (See page 9)

Door

Magnetic door plunger (See page 3)

Drain pump filter cover Drain pump filter Drain hose

Accessories

Included Accessories Optional Accessories

Water inlets

TurboWash™ Upper Nozzle

Door seal

Tub

Leveling feet

Shipping

bolts

Power cord

Drain hose

Hot/cold water hoses Non-skid pads

Wrench Tie strap

Caps for covering

shipping bolt holes

Elbow bracket

(for securing drain hose)

Pedestal

(sold separately)

Stacking Kit

(sold separately)

NOTE

yContact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are

missing.

yFor your safety and for extended product life, use only authorized components. The manufacturer

is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts.

yThe images in this guide may be different from the actual components and accessories, and are subject

to change by the manufacturer without prior notice for product improvement purposes.

INTRODUCING YOUR WASHING MACHINE

Control Panel Features

Cycle selector

Power Button

Operation

Button Description

Operation

Start/ Pause Button

yTurns the washing machine on and off. y(During the wash cycle) stops operation, and cancels the settings.

Tub Clean

- For tub clean. (see page 30.)

Allergiene™

- For cotton, underwear. (see page 24.)

Sanitary

- For underwear, diapers, etc. (see page 24.)

Bright Whites™

- For white fabrics. (see page 24.)

Bulky/Large

- For blankets or large, bulky items. (see page 24.)

Heavy Duty

- For heavily soiled cotton fabric. (see page 24.)

Cotton/Normal

- For general laundry, such as cotton T-shirts or towels. (see page 24.)

Towels

- For towels. (see page 24.)

Perm. Press

- For wrinkle-free fabrics. (see page 24.)

Hand Wash/Wool

- For wool or hand-wash fabrics. (see page 24.)

Delicates

- For sheer and delicate fabrics. (see page 24.)

Speed Wash

- For small quantities of lightly soiled items. (see page 24.)

Small Load

- For a few items. (see page 24.)

Drain+Spin

- For items that only require draining and spinning. (see page 24.)

yStarts or pauses the wash cycle.

- If you do not press the Start/Pause button within 4 minutes of selecting a cycle, the washing machine will turn off automatically and all settings will be lost.

y(Press repeatedly) Selects the water temperature for the wash cycle. (see page 25.)

- Select water temperature from 5 settings.

y(Press repeatedly) Selects the spin speed. (see page 25.)

- Selects spin speed from 5 settings.

y(Press repeatedly) Selects a wash cycle by soil level. (see page 25.)

- Selects soil level from 5 settings.

y(Press repeatedly) Selects a dry cycle. Pressing this button enables drying.

(See page 26.)

Water Temperature Selection Button

Display

Spin Speed Selection Button

Soil Level Selection Button

Dry Selection Button

ENGLISH

INTRODUCING YOUR WASHING MACHINE

Operation (continued)

Button Description

y(Press before starting wash cycle) Use this option to add steam for

extra cleaning power. (see page 27.)

y(Press and hold before starting wash cycle) Tumbles clothes after

cycle finishes to prevent wrinkles. (see page 28.)

yUse this option to save on energy consumption. (see page 27.)

Display

ySet the delay time of starting the cycle. (see page 27.)

yUse this option to save a special combination of settings that you use

frequently. (see page 28.)

yUse this option to save time. (see page 27.)

yUse this option to rinse detergent from the load. (see page 26.)

y(Press before wash cycle) Add an extra rinse to the selected cycle. (see page 27.) y(Press and hold during wash cycle) The drum is equipped with a white

LED light that illuminates when the washer is turned on. (see page 28.)

y(Press before wash cycle) Pre-wash heavily soiled laundry. (see page 26.) y(Press and hold during wash cycle) Lock/Unlock the buttons. (see page 28.)

Door lock indicator

Cycle process indicator

Delay wash indicator

Estimated time remaining/ error message display (See page 34)

Display Icon Description

yThis portion of the display shows which stage of the wash cycle is

currently underway (Wash, Rinse, Spin, Dry).

yThis indicator shows that the door is locked. The washer door will lock while

the washer is operating. The door can be unlocked by pressing the START/ PAUSE button to stop the washer.

yThis indicator shows that the washer has been set for Delay Wash. The

washer will start automatically after the set delay time has passed.

yWhen the START/PAUSE button is pressed, the washer automatically

detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.

INSTALLATION INSTRUCTIONS

Preview Installation Order

Checking and choosing

the proper location

Connecting

the drain line

Test run

Unpacking and removing

shipping bolts

Leveling the

washing machine

Connecting

the water line

Plugging in the power

cord and grounding

ENGLISH

WARNING

yWasher is heavy! Two or more people are required when moving and unpacking the washer.

to follow this warning can result in back or other injury.

yStore and install the washer where it will not be exposed to temperatures below freezing or exposed

to outdoor weather conditions.

shock, or death.

yProperly ground washer to conform with all governing codes and ordinances.

warning can cause serious injury, fire, electric shock, or death.

yTo reduce the risk of electric shock, do not install the washer in humid spaces.

warning can cause serious injury, fire, electric shock, or death.

yThe base opening must not be obstructed by carpeting when the washer is installed on a carpeted

floor.

yDo not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

outlet.

yCertain internal parts are intentionally not grounded and may present a risk of electric shock only during

servicing. Service personnel - Do not contact the following parts while the appliance is energized: pump, valve, motor, control board.

Failure to follow this warning can cause serious injury, fire, electric

Failure to follow this

Failure

INSTALLATION INSTRUCTIONS

Checking and Choosing the Proper Location

Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.

Clean the floor before installation.

- Make sure to select solid and smooth ground. Two or more people are needed for moving and

unpacking the washing machine. Allow for sufficient space between the walls and

the washing machine for installation.

Space requirements

You must allow sufficient space for water lines, the drain line, and airflow.

NOTE

yBe sure to allow for wall, door, or floor

moldings that may incr he required clearances.

Installing on a floor

30 ½"

(77 cm)

21 ¼"

(54 cm)

0.2" (0.5 cm)

NOTE

yThe floor must be strong and rigid enough to

support the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.

yBefore installing the washer, make sure the

floor is clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.

yIf a drip pan must be used, take extra care

to follow the instructions provided with the drip pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.

Installing on a pedestal or stacking kit

0.2" (0.5 cm)

30 ½"

(77 cm)

29 ¾"

(75.6 cm)

52 "

(132.2 cm)

4" (10 cm)

(2.5 cm)

771/2"

(196.8 cm)

27"

(68.6 cm)

1" (2.5 cm)

29 ¾"

(75.6 cm)

4" (10 cm)

(5 cm)

27"

(68.6 cm)

2" (5 cm)

NOTE

yRefer to the instructions packaged with the

optional PEDESTAL or STACKING KIT before installing with a PEDESTAL or a STACKING KIT.

Unpacking and Removing Shipping Bolts

When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base. If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do not lay the washer on its front or back.

INSTALLATION INSTRUCTIONS

Remove the bottom two shipping bolts with the

wrench (included). Fully loosen all four shipping bolts by turning them counterclockwise, and then pull them out.

Shipping

bolt

Locate the four hole caps included in the

accessory pack and install them in the shipping bolt holes.

Cap

Retainer

ENGLISH

NOTE

ySave the bolt assemblies for future use. To

prevent damage to internal components, do not transport the washer without reinstalling the shipping bolts.

y Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.

INSTALLATION INSTRUCTIONS

Connecting the Water Lines

Check the rubber seals on both sides of the hose.

- Insert a rubber seal into the threaded fittings on each hose to prevent leaking.

Rubber seal

Connect the hoses to the water inlets tightly by

hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.

Cold

water

inlet

Hot water inlet

Water hose (To faucet)

Water hose (To water inlet on the washing machine)

Connect the water supply hoses to the HOT and

COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.

WARNING

yDo not overtighten. Damage to the coupling

can result.

After connecting the inlet hoses to the water

faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let the water drain into a bucket, and check the water temperature.

WARNING

yDo not overtighten the hoses.

can damage the valves resulting in leaking and property damage.

Check for leaks by turning on the faucets.

- If water leaks, check steps 1 to 4 again.

NOTE

yFor your safety, and for extended Product

life, we recommend using high-quality LG components. LG is Not responsible for product Malfunction or damage caused by the use of separately purchased Non-LG parts.

yUse new hoses when installing the washing

machine. Do not reuse old hoses.

yContact LG Customer Service for Assistance

in buying hoses : 1-800-243-0000.

yPeriodically check the hoses for cracks,

leaks and wear, and replace the hoses every 5 years. Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.

yWater supply pressure must be between 20

psi and 120 psi (138 – 827 kPA). If the Water supply pressure is more than 120 psi, a Pressure reducing valve must be installed.

yTo provide optimum washing performance

the hot water temperature should be set at 120 – 135°C (48-57°C) and the cold at 60°C (15°C).

Overtightening

INSTALLATION INSTRUCTIONS

Connecting the Drain Line

Secure the drain hose in place to prevent moving and leaking.

NOTE

The drain hose should be properly secured. Failure to properly secure the drain hose can result in flooding and malfunction.

Total height of the hose end should not exceed 96 inches (244.8 cm) from the bottom of the washer.

The drain must be installed in accordance with any applicable local codes and regulations.

Make sure that the water lines are not stretched, pinched, crushed, or kinked.

Using a standpipe

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

No more than 4 inches (10 cm)

Elbow bracket

Using a laundry tub

Clip the end of the hose into the elbow bracket.

No more than 4 inches (10 cm)

Elbow bracket

Hang the end of the drain hose over the side of

the laundry tub.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

ENGLISH

Insert the end of the drain hose into the

standpipe.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

+ 32 hidden pages