LG WM3550HWCA User Manual [en, es, fr]

ENGLISH

ESPAÑOL

FRANÇAIS

OWNER’S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference.

WM3550H*CA

P/NO : MFL62526872

www.lg.com

PRODUCT FEATURES

INVERTER DIRECT-DRIVE MOTOR

The inverter motor, which is directly connected to the tub, minimizes energy loss and produces little noise and vibration.

SMARTDIAGNOSIS™

Should you experience any technical difficulty with your washing machine, it has the capability of transmitting data by phone to the Customer Information Center. The call center agent records the data transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis (Refer to page 38).

TUB CLEAN

Regular cleaning of the tub on a monthly basis using TUB CLEAN will keep the tub clean and fresh.

MAGNETIC DOOR PLUNGER

Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed, do not close the door completely. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.

LARGE CAPACITY STAINLESS STEEL DRUM

The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and allow easier access for large items.

CHILD LOCK

Use this option to disable the controls during a wash cycle. This option can prevent children from changing cycles or operating the machine.

DETERGENT DISPENSER DRAWER

The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main laundry detergent, liquid bleach, and fabric softener into different compartments.

HIGH-EFFICIENCY STEAM CYCLES

During LG’s unique high-efficiency STEAM cycles, the steam nozzle injects fabrics with hot steam to gently remove tough stains.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:

DANGER

You will be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

CAUTION

You may be slightly injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

BASIC SAFETY PRECAUTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

•

Before use, the washer must be properly installed as described in this manual.

•

Do not wash articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances,

they give off vapors that could ignite or explode.

•

Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water.

These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced

in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.

system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes.

accumulated hydrogen gas. As the gas is flammable,

smoke or use an open flame during this time.

•

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used near children.

•

Before the washer is removed from service or discarded,

remove the door to prevent children from climbing inside.

•

Do not install or store the washer where it will be exposed

to the weather or freezing temperatures.

•

Do not tamper with controls.

•

If the hot water

This will release any

do not

Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual.

strongly recommend that any service be performed by a qualified technician.

•

See Installation Instructions for grounding requirements.

•

ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

•

Do not place items exposed to cooking oil in your washer.

Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

•

Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

• This washer is not designed for maritime use or for mobile

installations such as in RVs, aircraft, etc.

•

Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.

•

Do not use to dry articles containing foam rubber or similarly textured rubber-like materials.

• Packaging material can be dangerous for children. There is a

risk of suffocation!

•

Always check the inside of the washer for foreign objects before loading laundry. Keep the door closed when not in use.

•

Do not reach into the appliance if the tub or agitator is moving.

Keep all packaging from children.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

•

Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures.

with the washer for installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

•

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

warning can cause serious injury, fire, electric shock, or death.

•

For personal safety, this appliance must be properly grounded.

injury, fire, electric shock, or death.

•

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet

shock from this appliance.

•

This washer must be plugged into a 120 VAC, 60 Hz grounded outlet.

serious injury, fire, electric shock, or death.

•

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

•

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

•

Do not install on carpet. Install washer on a solid floor.

Failure to follow this warning can cause serious leak damage.

•

Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.

to follow these warnings can cause serious injury, fire, electric shock, or death.

Failure to follow this warning can cause serious

Installation instructions are packed

Failure to follow this

to minimize the possibility of electric

Failure to follow this warning can cause

Failure

•

The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

•

Never unplug your washer by pulling on the power cord.

Always grip plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.

•

Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

injury, fire, electric shock, or death.

•

When installing or moving the washer, be careful not to pinch, crush, or damage the power cord.

this warning can cause serious injury, fire, electric shock, or death.

•

The washer must be installed and electrically grounded by a qualified service person in accordance with local codes

prevent shock hazard and assure stability during operation.

•

The washer is heavy. Two or more people may be needed to install and move the appliance.

in back or other injury.

•

Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.

serious leak damage.

•

Do not install the washer in humid spaces to reduce the risk of electric shock

serious injury, fire, electric shock, or death.

•

To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses.

the safety warnings in this manual could result in property damage, injury to persons or death.

This provides the best performance and also

Failure to follow this warning can cause serious

Failure to follow

Failure to do so can result

Failure to follow this warning can cause

. Failure to follow this warning can cause

Failure to follow all of

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following.

•

Unplug the washer before cleaning

electric shock.

•

Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.

•

Do not put oily or greasy rags or clothing on top of the washer.

the materials.

•

Do not wash items that are soiled with vegetable or cooking oil.

to the remaining oil, the fabric may smoke or catch fire by itself.

•

Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.

serious injury, fire, electric shock, or death.

•

Do not combine laundry products for use in one load unless specified on the label.

•

Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products.

resulting in serious injury or death.

•

Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the START/ PAUSE button and allow the drum to coast to a complete stop before reaching inside.

can cause serious injury, fire, electric shock, or death.

These substances give off vapors that could ignite

These items may contain some oil after laundering. Due

Incorrect usage can produce poisonous gas,

to avoid the risk of

They will damage the finish.

Failure to follow this warning can cause

Failure to follow this warning

•

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances.

these warnings could result in serious injury to persons or death.

•

Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.

with these warnings could result in serious injury to persons or death.

•

Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels.

Failure to comply with these warnings could result in serious injury to persons or death..

•

Remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded.

Failure to do so can result in serious injury to persons or death.

Failure to comply with

Failure to comply

SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

2 PRODUCT FEATURES

3 IMPORTANT SAFETY INSTRUCTIONS

4 BASIC SAFETY PRECAUTIONS 4 GROUNDING INSTRUCTIONS 5 SAFETY INSTRUCTIONS FOR INSTALLATION 6 SAFETY INSTRUCTIONS FOR USE, CARE, CLEAN-

ING, AND DISPOSAL

INTRODUCING YOUR WASHING MACHINE

8 Parts and Accessories

9 Control panel features

11 INSTALLATION INSTRUCTIONS

11 Preview installation order 12 Checking and choosing the proper location 13 Unpacking and removing shipping bolts 14 Connecting the water lines 15 Connecting the drain line 16 Leveling the washing machine 17 Plugging in the power cord and grounding 17 Test run

24 - Heavy soiled items, HEAVY DUTY 25 - Sheer items, 25 - Items labeled wool or hand-washable,

WASH/WOOL

25 - Quick wash, SPEED WASH 25 - Rinse, drain and spin only, RINSE + SPIN 25 Cycle setting buttons 25 Setting options before cycle 25 - Setting the water temperature, WASH TEMP. 26 - Setting spin speed, SPIN SPEED 26 - Setting soil level of laundry, SOIL LEVEL 26 - Prewashing, PRE-WASH 26 - Tumbles clothes to prevent wrinkle, FRESH CARE 27 - Adding extra rinse cycle, EXTRA RINSE 27 - Adding extra water to the washing and rinse

cycle, WATER PLUS

27 - Presetting the start time, DELAY WASH 27 - Efficiency cleaning, STEAM 28 - Saving energy, COLDWASH™ 28 - Tuning on/off melody and button tones, SIGNAL

ON/OFF

28 Setting the options during cycle 28 - Button lock feature, CHILD LOCK 28 - Detecting weight of load, LOAD SIZE

DELICATES

HAND

18 PREPARATION

18 Sorting wash loads 18 - Precautions for fabric care before wash cycle 19 - Fabric care labels 19 - Sorting laundry 20 Using detergent/fabric softener 20 - Recommended detergent 20 - Loading the dispenser

22 USING YOUR WASHING MACHINE

22 Basic operation 23 Cycle guide 24 Main cycle 24 - Reduce odor and wrinkles, STEAM FRESH™ 24 - Reduce laundry allergen, 24 - Reduce laundry bacteria, 24 - For white fabrics, 24 - Blankets or bulky items, BULKY/LARGE 24 - Wrinkle free items, 24 - Normal items, COTTON/NORMAL

BRIGHT WHITES

ALLERGIENE SANITARY

PERM. PRESS

™

29 MAINTENANCE

29 Care 29 - Care after wash 29 - Care in cold climates 30 Cleaning 30 - Clean your the drum, TUB CLEAN 31 - Cleaning the detergent dispenser drawer 32 - Cleaning the water inlet filters 33 - Cleaning the drain pump filter 34 - Cleaning the door seal

35 TROUBLESHOOTING

35 Checking error messages 36 Before calling for service

37 SPECIFICATIONS

38 USING SMARTDIAGNOSIS™

39 WARRANTY

INTRODUCING YOUR WASHING MACHINE

Parts and Accessories

Parts

Detergent

dispenser

drawer

(See page 20)

Door

Magnet Door

Plunger

(see page 2)

Control panel (See page 9)

Water circulation and steam nozzles

Door seal

Tub

Water inlets

Shipping

bolts

Power cord

Drain hose

Leveling feet

Drain pump filter cover Drain pump filter Drain hose

Accessories

In c l u d e d Accessories Op t I O n a l Accessories

Hot/cold water hoses Non-skid pads

Wrench Tie strap Elbow bracket

Caps for covering

shipping bolt holes

(for securing drain hose)

Pedestal Stacking kit

14" Pedestal Color

WDP4C Chardonnay WDP4R Wild Cherry Red WDP4S Titanium WDP4V Graphite Steel WDP4W White WDP4N Midnight Blue

Stacking Kit Color

CSTK1 Chardonnay RSTK1 Wild Cherry Red SSTK1 Titanium GSTK1 Pearl Gray WSTK1 White NSTK1 Midnight Blue

NOTE

Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.

For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for

product malfunction or accidents caused by the use of separately purchased unauthorized components or parts. The images in this guide may be different from the actual components and accessories, and are subject to change by the

manufacturer without prior notice for product improvement purposes.

INTRODUCING YOUR WASHING MACHINE

ENGLISH

Control panel features

Cycle selector

Power Button

Operation

Button Description

Operation

Start/ Pause Button

Water Temperature Selection Button

Turns the washing machine on and off.

(During the wash cycle) stops operation, and cancels the settings.

Display

Spin Speed Selection Button

Soil Level Selection Button

STEAM FRESH™

- For dress shirt and blouses (see page 24)

ALLERGIENE™

- For cotton, underwear (see page 24)

SANITARY

- For underwear, diaper etc. (see page 24)

BRIGHT WHITES™

- For white fabrics (see page 24)

BULKY/LARGE

- For blankets or large bulky items (see page 24)

PERM. PRESS

- For wrinkle-free fabrics (see page 24)

COTTON/NORMAL

- For general laundry, such as cotton T-shirts or towels (see page 24)

HEAVY DUTY

- For heavy soiled cotton fabric (see page 24)

DELICATES

- For sheer and delicate fabrics (see page 25)

HAND WASH/WOOL

- For wool or hand-wash fabrics (see page 25)

SPEED WASH

- For small quantities of lightly soiled items (see page 25)

RINSE + SPIN

- For items that only require Rinsing and Spinning (see page 25) Starts or pauses the washing machine cycle.

- If you do not press the C button within 4 minutes of selecting a cycle, the washing machine will turn off automatically.

(Press repeatedly) Selects the water temperature for the wash cycle (see page 25).

- Select water temperature from 5 settings.

(Press repeatedly) Selects the spin speed in the desired level (see page 26).

- Selects spin speed from 5 settings.

(Press repeatedly) Selects a wash cycle by soil level (see page 26).

- Selects soil level from 5 settings.

INTRODUCING YOUR WASHING MACHINE

Operation (continued)

Button Description

(Press before wash cycle) Pre-wash heavily soiled laundry (See

(Press and hold during wash cycle) Lock/Unlock the button (See

(Press before wash cycle) Tumbles clothes to prevent wrinkle (See

(Press and hold during wash cycle) Displays the load size after detecting the weight of the laundry

(See page. 28).

(Press before wash cycle) Add extra rinse cycle to the selected one (See

(Press and hold) Clean the wash tub (See

(Press before wash cycle) Add water during wash and rinse cycle (See

(Press and hold) Tuning on/off melody and button tones (See

Set delay time of starting cycle (See

Use this option for extra cleaning power (

Use this option to save your energy consumption (

page. 30).

page. 27).

See page. 27).

See page. 28).

page. 26).

page. 28).

page. 26).

page. 27).

page. 28).

Display

Load size sensing indicator (See page. 28)

Cycle process indicator

Button Description

At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes.

The display will indicate the approximate load size in the LOAD SIZE display. This allows you to adjust the amount of detergent and other additives for best results and improved efficiency.

This portion of the display shows which stage of the wash cycle is currently underway (LOAD

SENSING, WASH, RINSE or SPIN).

Indicates that the door is locked. The washer door will lock while the washer is operating. The door

can be unlocked by pressing the START/ PAUSE button to stop the washer.

This indicator shows that the washer has been set for DELAY WASH. The washer will start

automatically after the set delay time has passed.

Door lock indicator

Delay wash indicator

Estimated time remaining/ error message display

(See page 35)

When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight)

and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.

INSTALLATION INSTRUCTIONS

ENGLISH

INSTALLATION INSTRUCTIONS

Preview installation order

Checking and choosing the

proper location

Unpacking and removing

shipping bolts

Connecting the water line

Connecting the drain line Leveling the washing

Test run

WARNING

Washer is heavy! Two or more people are required when moving and unpacking the washer.

back or other injury.

Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather

conditions. Properly ground washer to conform with all governing codes and ordinances.

serious injury, fire, electric shock, or death.

To reduce the risk of electric shock, do not install the washer in humid spaces.

serious injury, fire, electric shock, or death. The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.

Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet.

follow this warning can cause serious injury, fire, electric shock, or death.

Failure to follow this warning can cause serious injury, fire, electric shock, or death.

machine

Plugging in the power cord

and grounding

Failure to do so can result in

Failure to follow this warning can cause

Failure to

INSTALLATION INSTRUCTIONS

293/4"

(75.6 cm)

4" (10 cm)

51"

(129.5 cm)

/4"

(57 cm)

27"

68.6 cm

(2.5 cm)

1" (2.5 cm)

29 3/4"

(75.6 cm)

4" (10 cm)

27"

(68.6 cm)

(2.5 cm)

1" (2.5 cm)

771/2"

(196.8 cm)

Checking and choosing the proper location

Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.

Clean the floor before installation.

- Make sure to select solid and smooth ground.

Two or more people are needed for moving and

unpacking the washing machine.

Allow for sufficient space between the walls and the

washing machine for installation.

Space requirements

You must allow sufficient space for water lines, the drain line, and airflow.

NOTE

Be sure to allow for wall, door, or floor moldings that

may increase the required clearances.

NOTE

The floor

must be strong and rigid enough to support

the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house. Before installing the washer, make sure the floor is

clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor. If a drip pan must be used, take extra care to follow the

instructions provided with the drip pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.

Installing on a pedestal or stacking kit

Installing on a floor

NOTE

Refer to the instructions packaged with the optional

PEDESTAL or STACKING KIT before installing with a PEDESTAL or a STACKING KIT.

INSTALLATION INSTRUCTIONS

ENGLISH

Unpacking and removing shipping bolts

When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base. If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do NOT lay the washer on its front or back.

Remove the bottom two shipping bolts with the wrench

(included) to fully loosen all four shipping bolts by turning them counterclockwise and then pulling them out.

Retainer

Shipping

bolt

Locate the four hole caps included in the accessory pack

and install them in the shipping bolt holes.

Cap

NOTE

Save the bolt assemblies for future use. To prevent

damage to internal components, DO NOT transport the washer without reinstalling the shipping bolts. Failure to remove shipping bolts and retainers may

cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.

INSTALLATION INSTRUCTIONS

Connecting the water lines

Check the rubber seals on both sides of the hose.

- Insert a rubber seal into the threaded fittings on each hose to prevent leaking.

Connect the hoses to the water inlets tightly by hand and

then tighten another 2/3 turn with pliers.

- Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.

Rubber seal

Water hose (To faucet)

Water hose (To water inlet on the washing machine)

Connect the water supply hoses to the HOT and COLD

water faucets tightly by hand and then tighten another 2/3 turn with pliers.

- Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.

WARNING

Do not overtighten.

After connecting inlet hose to water faucets, turn on the

water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.

Damage to the coupling can result.

Cold

water

inlet

WARNING

Do not overtighten the hoses.

Check for leaks by turning on the faucets.

damage the valves resulting in leaking and property damage.

- If water leaks, check steps 1 to 4 again.

NOTE

For your safety, and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts. Use new hoses when you install the washing machine. Do not reuse old hoses. Use only the inlet hoses provided with the washer. LG does not recommend the use of aftermarket hoses. Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years. Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects. Water supply pressure must be between 14.5 PSI and 116 PSI (100~800 kPa). If the water supply pressure is more than 116 PSI, a pressure reducing valve must be installed. To provide optimum washing performance the hot water temperature should be set at 120-135°F (48-57°C) and the cold at 60°F (15°C).

Overtightening can

Hot water inlet

INSTALLATION INSTRUCTIONS

ENGLISH

Connecting the drain line

Secure the drain hose in place to prevent moving and leaking.

NOTE

The drain hose should be properly secured. Failure to

properly secure the drain hose can result in flooding and malfunction. Total height of the house end should not exceed 96

inches (244.8 cm) from the bottom of the washer. The drain must be installed in accordance with any

applicable local codes and regulations. Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

Using a standpipe

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the

elbow bracket, mold or microorganisms could spread to the inside of the washer.

Using a laundry tub

Clip the end of the hose into the elbow bracket.

- Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold, or microorganisms could spread to the inside of the washer.

No more than 4 inches (10 cm)

Elbow bracket

Hang the end of the drain hose over the side of the

laundry tub.

Elbow Bracket

No more than 4 inches (10 cm)

Elbow bracket

Insert the end of the drain hose into the standpipe.

Elbow Bracket

Drain Hose

Use a tie strap to secure the drain hose in place.

Drain Hose

Use a tie strap to secure the drain hose in place.

INSTALLATION INSTRUCTIONS

Leveling the washing machine

The washer tub of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid.

Check the washing machine’s level.

- Check the precise level by rocking the top edges of the washing machine or placing a level on the washing machine. The slope beneath the washing machine must not exceed 1°, and all four leveling feet must rest firmly on the floor.

Level

1°

Check the washing machine’s level again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock.

- If the washing machine rocks, repeat steps 1 to 3.

WARNING

Using the washing machine without leveling, it may

result in malfunction caused by the production of excess vibration and noise. If you are installing the washing machine on the

optional pedestal, you must adjust the leveling feet on the pedestal to level the washing machine. The washing machine´s leveling feet should be minimized and turn the locknuts counterclockwise to secure.

Use the leveling feet only when you level the washing

machine.

may cause abnormal vibration of the washing machine.

If you raise the leveling feet unnecessarily, it

Turn the lower leveling feet clockwise to level the

washing machine.

- Turning the lower leveling feet clockwise raises the washing machine.

Raise

Turn the locknuts counterclockwise and tighten them

when the washing machine is level.

Tighten all 4 lock

nuts securely using

the wrench.

Using non-skid pads (optional)

If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. In the event of this, lay the non-skid pads under the leveling feet and adjust the level.

Clean the floor to attach the non-skid pads.

- Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip.

Adjust the level after placing the washing machine in the

installation area.

Place the adhesive side of the non-skid pad on the floor.

- It is most effective to install the non-skid pads under the front legs. If it is hard to place the pads under the front legs, place them under the back legs.

This side up

Adhesive side

Remove backing

Check the washing machine’s level again.

- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.

INSTALLATION INSTRUCTIONS

ENGLISH

Plugging in the power cord and grounding

Make sure to ground the washing machine to prevent a short circuit or an electric shock when plugging in.

Using a 3-prong outlet

Plug in the electrical outlet without additional grounding.

WARNING

The power outlet must be within 60 inches (1.5 m) of either

side of the washer. The appliance and outlet must be positioned so that the plug

is easily accessible. Do not overload the outlet with more than one appliance.

The outlet must be grounded in accordance with current

wiring codes and regulations.

Time-delay fuse or circuit breaker is recommended.

It is the personal responsibility and obligation of the product

owner to have a proper outlet installed by a qualified electrician.

Do not use a worn or damaged power cord or power plug.

Replace or repair it immediately.

in death, fire, electric shock, or malfunction.

Do not modify the power cord and take care not to damage it

when installing or moving the washing machine.

so may result in death, fire, electric shock, or malfunction.

Make sure that the washing machine is grounded.

Connect this washing machine to a grounded outlet

conforming to the rating prior to use.

result in fire, electric shock, or malfunction.

Do not use adaptors or extension cords.

machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or disorder.

Do not damage or cut off the ground prong of the power

Doing so may cause death, fire, electric shock, or

cord.

product malfunction.

Failure to do so may result

Failure to do

Failure to do so may

The washing

Test run

Check if the washing machine is properly installed and run a test cycle.

Load the washing machine with 6 pounds of laundry.

Press

Turn B to RINSE + SPIN.

Press C.

Check if water is supplied, that the washing machine

- The wash cycle starts.

does not rock or vibrates excessively, and that it drains well during the spin cycle.

- If water leaks during water supply, see page 14,

Connecting the water lines

- If the washing machine rocks and vibrates excessively, see page 16, again.

- If the drain does not work, see page 15,

drain line

Leveling the washing machine

to install it properly.

to connect them properly.

to level it

Connecting the

PREPARATION

Sorting wash loads

Precautions for fabric care before wash cycle

Read and observe the following to prevent shrinkage or damage to clothes.

Check all pockets to make sure that they are empty.

-Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.

Close zippers, hooks, and drawstrings to prevent these

items from snagging or tangling on other clothes.

Pretreat heavily stained areas before washing.

- Doing so will produce clean, stain-free results.

Combine large and small items in a load. Load large items

first.

Large items should not be more than half of the total

washload.

The washer can be fully loaded, but the drum should not be

tightly packed with items.

-The door of the washer should close easily.

Do not wash single items, except for bulky items such as

blankets. Make sure to wash laundry in similar types of loads.

- Washing a single small item may result in the tub becoming unbalanced, vibrating and making a noise.

Brush heavy soil, dust, or hair off fabrics before washing.

- Laundry may not wash clean if there is dirt or sand on the fabrics, or they may damage due to particles rubbing against sheer fabrics.

Wash blankets individually.

- Washing more than one blanket together may produce unclean results due to tangling or an unbalanced load.

Always separate fabrics according to their colors and wash

them separately to prevent colors from running.

- Fabrics may damage or become stained due to fabric dyes running, or due to foreign objects transferring from one fabric to another.

Do not wash waterproof clothes.

- This may cause abnormal vibration, or may cause the load to bounce, which could damage the tub.

Check if there are any other foreign objects in the door seal

and take extra care that clothes do not get caught there.

- Foreign objects in the door seal may stain clothes, and water may leak if clothes get caught in the door seal.

Wash underwear or small, light items in a laundry net.

- Small, light items may get caught in the door seal, and a brassiere hook may damage other items or the tub.

PREPARATION

ENGLISH

Fabric care labels

Most articles of clothing feature fabric care labels that include instructions for proper care.

Category Label Directions

Hand Wash

Machine Wash, Normal Cycle

Use Permanent Press/Wrinkle Resistant washing machine setting (which has a cool down or cold spray before the reduced spin)

Washing

Water Temperature

Use Gentle/Delicate washing machine setting (slow agitation and/ or reduced wash time).

Do Not Wash

Do Not Wring

Hot

Warm

Cold/Cool

Any Bleach (When Needed)

Only Non-Chlorine Bleach (When

Bleach symbols

Needed)

Do Not Bleach

Sorting laundry

It is recommended that you sort laundry into similar loads that are washable in the same cycle. Refer to the following chart for sorting clothes

Colors Soil Fabric Lint

Whites / Lights / Darks Heavy / Normal / Light Delicates / Easy Care / Sturdy Cottons Lint Producers / Lint Collectors

PREPARATION

Using detergent/fabric softener

Recommended detergent

Make sure to use HE (High-Efficiency) detergent for frontloading washing machines. HE detergents dissolve more efficiently and produce fewer suds to ensure efficient washing and rinsing. Use the correct amount of detergent as indicated on the label of the detergent packaging.

Designed specially to use only HE (High-Efficiency) detergent

NOTE

Only use HE detergents, since using a regular

detergent may produce excessive suds. HE detergents produce fewer suds, dissolve more

efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean. Use less detergent for soft water.

Wipe up any spills immediately, as liquids could

damage the finish and the control panel of the washing machine. Using too much detergent can cause a build-up in

the tub resulting in unsatisfactory performance and machine malfunction.

If you use a detergent that does not dissolve easily or a

detergent with high viscosity, it will leave a residue on the tub, which may not rinse properly.

Loading the dispenser

The detergent dispenser drawer of the washing machine has a dispenser compartment for each detergent type. Add the appropriate detergents into its respective compartments.

Pull out the detergent dispenser drawer.

Add the appropriate detergent to its allocated

compartment.

- If you use a liquid detergent, check if the liquid detergent cup is in place.

- If you use a powdered detergent, remove the liquid detergent cup and put the powder in the main wash detergent compartment.

Liquid chlorine bleach compartment

Liquid fabric

Liquid detergent Cup

softener compartment

Main wash detergent compartment

Close the detergent dispenser drawer slowly.

- Slamming the detergent dispenser drawer may result in the detergent overflowing into another compartment or pouring into the tub earlier than programmed.

NOTE

It is normal for a small amount of water to remain in

the dispenser compartments at the end of the cycle.

Pre-wash detergent compartment

PREPARATION

ENGLISH

Pre-wash Detergent Compartment

Add liquid or powdered detergent to this compartment when using the pre-wash option. Always use HE (High-Efficiency) detergent with your washing machine.

NOTE

If liquid detergent is to be used for the main wash

when using the pre-wash option, the liquid detergent cup accessory must be used in main wash dispenser to prevent the main wash liquid detergent from being dispensed immediately. The amount of detergent added for the pre-wash option

is 1⁄2 the amount recommended for the main wash

cycle. For example, if the main wash cycle requires one

measure of detergent, add 1⁄2 measure for the pre-

wash option.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always use HE (High-Efficiency) detergent with your washing machine. Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup in clothing and the washer. Either powdered or liquid detergent may be used.

NOTE

Liquid or powdered color-safe bleach may be added

to the main wash compartment with detergent of the same type. When using liquid detergent, make sure the liquid

detergent cup and insert are in place. Do not exceed the maximum fill line. When using powdered detergent, remove the insert

and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be dispensed automatically at the proper time during the wash cycle.

NOTE

Do not add powdered or liquid color-safe bleach to this

compartment. Always follow the manufacturer’s recommendations

when adding bleach. Do not exceed the maximum fill line. Using too much bleach can damage fabrics. Never pour undiluted liquid chlorine bleach directly onto

the load or into the drum. Fabric damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.

NOTE

Always follow the manufacturer’s recommendations

when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes. Dilute concentrated fabric softeners with warm water.

Do not exceed the maximum fill line. Never pour fabric softener directly onto the load or into

the drum.

USING YOUR WASHING MACHINE

Basic operation

Load the laundry into the washing machine and close the door.

Press A.

- The lights around the cycle selector knob will illuminate and a chime will sound.

Turn

- The proper default option is automatically set according to the wash cycle. See page 23,

- See page 24,

- To change the options, press the option button and select the desired option. See page 25,

- Skip to step 4 to use the default setting without changing the options.

Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser drawer.

- See page 20,

to the desired cycle.

, for more detailed default options for each cycle.

guide

Main cycle

Setting options before cycle

Using detergent/fabric softener

, for details on the wash cycles.

, for more details on options.

Cycle

, for more details on using detergent.

WARNING

To reduce the risk of fire, electric shock, or injury to persons,

operating this appliance.

NOTE

The front-load washing machine rotates the laundry in a way that allows it to use less water while still fully saturating your

clothing. It is normal to not be able to see water during the wash cycle. If the temperature or the water level inside the machine is too high, the door locks and cannot be opened. To open the door

while washing, use the Rinse + SPIN feature.

Press

- The washing machine will start.

When the melody plays, the wash cycle is finished.

- When the washing cycle is finished, the door will unlock. Open the door and remove the laundry immediately.

- Make sure to check around the door seal when taking out the finished load. Small items may be caught in the door seal.

read the IMPORTANT SAFETY INSTRUCTIONS before

USING YOUR WASHING MACHINE

Cycle guide

The cycle guide below shows the options and recommended fabric types for each cycle.

CYCLE FABRIC TYPE

STEAM

Dress shirts, blouses 20

FRESH™

ALLERGIENE™

Cotton, underwear, pillow covers, bed sheets, baby wear

SANITARY Heavily soiled

underwear, work clothes, diapers, etc.

BRIGHT WHITES

BULKY/ LARGE

White Fabrics 67~77 HOT

™

Large items such as blankets and comforters

PERM. PRESS

Dress shirts/pants, wrinkle-free clothing, poly/cotton blend clothing, tablecloths

COTTON/ NORMAL

Cotton, linen, towels, shirts, sheets, jeans, mixed loads

HEAVY DUTY

Heavy soiled Cotton Fabrics

DELICATES Dress shirts/blouses,

nylons, sheer or lacy garments

DISPLAY

TIME(MIN)

110~113

99~108

57 HOT

54~63 HOT

45~54 HOT

91~116 HOT

BASIC OPTION (=DEFAULT) ADDITIONAL OPTIONS

WASH TEMP.

EXTRA HOT



WARM COLD

TAP COLD



WARM COLD

TAP COLD



WARM COLD

TAP COLD



WARM COLD

TAP COLD



WARM COLD

TAP COLD

WARM



COLD

TAP COLD

SPIN

SPEED

( )

EXTRA HIGH



HIGH

( )

( )MEDIUM (---)LOW

(•)NO SPIN

( )

EXTRA HIGH



HIGH

( )

( )MEDIUM (---)LOW

(•)NO SPIN

( )

EXTRA HIGH



HIGH

( )

( )MEDIUM (---)LOW

(•)NO SPIN

(

)MEDIUM

(---)LOW

(•)NO SPIN

HIGH

( )

)MEDIUM

( (---)LOW

(•)NO SPIN

( )

EXTRA HIGH



HIGH

( )

( )MEDIUM (---)LOW

(•)NO SPIN

( )

EXTRA HIGH

HIGH

( )

(

)MEDIUM

(---)LOW

(•)NO SPIN

(

)MEDIUM

(---)LOW

(•)NO SPIN

HEAVY NORMAL LIGHT



HEAVY NORMAL LIGHT

HEAVY



NORMAL LIGHT

HEAVY NORMAL LIGHT



HEAVY NORMAL LIGHT



HEAVY NORMAL LIGHT

SOIL

LEVEL

PRE-

WASH



     



     



      



      



      



      



     

= Available option

●

FRESH

EXTRA

WATER

CARE

RINSE

PLUS

DELAY

WASH

  

    

STEAM

COLD

WASH™

ENGLISH



HAND WASH/ WOOL

SPEED

WASH

RINSE +

Items labeled “hand-washable”

Lightly soiled clothing and small loads

Rinse and Spin 19

WARM

COLD

TAP COLD

15 HOT

WARM COLD

TAP COLD

COLD



SPIN

Cycle time depends on water pressure, type and amount of load and chosen additional options.



(---)LOW

(•)NO SPIN

( )

EXTRA HIGH

HIGH

)

(

)MEDIUM

(---)LOW

(•)NO SPIN

( )

EXTRA HIGH



HIGH

( )

( )MEDIUM (---)LOW

(•)NO SPIN

NORMAL LIGHT



HEAVY NORMAL LIGHT



  



   

To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

USING YOUR WASHING MACHINE

Main cycle

You can wash laundry items more thoroughly by selecting the wash cycle that best suits the type of items to be

washed. Turn the a wash cycle, the light for the corresponding wash cycle will turn on. See page 22, operating methods.

Reduce odor and wrinkles,

This cycle uses the power of steam alone to quickly reduce wrinkles and odor in fabrics. It brings new life to wrinkled clothes that have been stored for an extended time and makes heavily wrinkled clothes easier to iron. Steam FreshTM can also be used to help reduce odors in fabrics.

Press A and turn B to STEAM FRESH™ cycle.

Load up to 5 items and close the door.

Press the until the correct number of items is

shown in the display. No other options need to be set.

Press C.

NOTE

After the STEAM FRESH™ cycle is complete, the

washer will tumble the clothes for up to 30 minutes to prevent rewrinkling. After removing clothes from the STEAM FRESH™

cycle, they may feel slightly damp. Place clothes on a

hanger for at least 10 minutes to allow them to dry. The STEAM FRESH™ cycle is not recommended for

use with 100% cotton clothing. Remove stains from clothing before using the STEAM

FRESH™ cycle; the high heat could cause stains to set permanently. Do not use STEAM FRESH™ with the following items

: wool, blankets, leather jackets, silk, wet clothes, lingerie, foam products, or electric blankets. Best results are achieved when articles are of similar

size and fabric type. Do not overload. If there is any moisture inside the drum, such as from

a previous wash cycle, wipe the drum dry with a towel before adding clothes.

to the desired cycle. When you select

Basic operation

, for more details on

STEAM FRESH™

Reduce laundry allergen,

This cycle is a powerful, high temperature cycle designed specifically to reduce certain allergens.

NOTE

Selecting the ALLERGIENE™ cycle automatically

incorporates steam into the wash cycle. The ALLERGIENE™ cycle can significantly reduce

allergens in bedding and clothing. The ALLERGIENE™ cycle helps reduce dust mite

populations and helps reduce allergens. Due to the higher energy and temperatures used, the

ALLERGIENE™ cycle is not recommended for wool, silk, leather, or any other delicate or temperature sensitive items

Reduce laundry bacteria,

This wash cycle reduces 99.9% bacteria on laundry through high temperature.

Sanitization Performance of Residential and Commercial, Family Sized Clothes Washers

For white fabrics,

This cycle is for washing white items only.

Protocol P172

BRIGHT WHITES™

Blankets or bulky items,

This cycle is for washing blankets or bulky items.

Wrinkle free items,

This cycle is for washing items such as wrinkle-free clothes or tablecloths to minimize wrinkles.

Normal items,

Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.

NOTE

If you press

another cycle, the washing machine proceeds to

and then C without selecting

ALLERGIENE™

SANITARY

Heavy soiled items,

This cycle is for washing heavily soiled laundry though more powerful tub rotation.

HEAVY DUTY

USING YOUR WASHING MACHINE

ENGLISH

Sheer items,

This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.

Items labeled wool or hand-washable,

This cycle is for washing shrinkable woolen or hand-washable items requiring delicate care. Only wash woolen items that are labeled machine washable or hand-washable.

NOTE

Laundry weight should be less than 8 pound (3.6 kg) to

prevent damage to the fabric. Use only natural or wool-safe detergent harmless to

fabrics and load 1/2 of the normal amount of detergent. The HAND WASH/WOOL

rotation angle and low speed spin for the ultimate fabric care.

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M0807

cycle uses a gentle tumble

Cycle setting buttons

Each cycle has preset settings that are selected automatically. You may also customize the settings using the

cycle setting buttons. Press the button for that option to view

and select other settings. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.

NOTE

To protect your garments, not every wash/rinse

temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details.

Setting options before cycle

You can select and add the desired optional functions before you start the washing machine.

Setting the water temperature,

WASH TEMP.

Set the water temperature for the wash cycle. Set the appropriate temperature, as specified in the fabric care label.

Press A and turn B to the desired cycle.

Quick wash,

Use the Speed Wash cycle to quickly wash lightly soiled clothing and small load. For high wash and rinse efficiency, it is recommended to wash small loads of 2-3 lightly soiled garments.

NOTE

Use a little detergent in this cycle. If you want more

rinsing, you can add extra rinse by using the option button.

Rinse, drain and spin only,

Use this cycle to rinse detergent from load.

RINSE+SPIN

Press repeatedly to select the desired water

temperature:

- When an optional item is selected, an indication light for the corresponding optional item turns on.

Press the desired option button to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press C.

NOTE

Cold rinses use less energy.

Your washer features a heating element to boost the

hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings. Select the water temperature suitable for the type of

load you are washing. Follow the fabric care label for best results.

USING YOUR WASHING MACHINE

Setting spin speed, SPIN SPEED

You can set the desired spin speed. Use this feature properly according to the characteristics of the load.

Press A and turn B to the desired cycle.

Press repeatedly to select the desired spin speed.

- When an optional item is selected, an indication light for the corresponding optional item turns on.

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press C.

NOTE

The Spin Speed button also activates the Drain & Spin

cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended.

Prewashing, PRE-WASH

Pre-wash for 16 minutes when clothes are covered in dirt or

dust. This feature is suitable for heavily soiled items.

Press A and turn B to the desired cycle.

Press .

3 Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press C.

light will turn on.

Tumbles clothes to prevent wrinkle,

FRESH CARE

Use this function when you are not able to unload your clothes, soon after the wash cycle ends.

Press A and turn B to the desired cycle.

Setting soil level of laundry,

SOIL LEVEL

You can wash your laundry more thoroughly by setting the proper soil level on the washing machine.

Press A and turn B to the desired cycle.

Press repeatedly to select a soil level.

- When an optional item is selected, an indication light for the corresponding optional item turns on.

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press C.

NOTE

This feature needs more time for heavily soiled loads or

less time for lightly soiled loads.

Press .

3 Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press C.

NOTE

This function provides periodic tumbling for up to about

19 hours to prevent wrinkles. If you press the START/

PAUSE or ON/ OFF button, you can unload your laundry

at anytime.

light will turn on.

USING YOUR WASHING MACHINE

ENGLISH

Adding extra rinse cycle, EXTRA RINSE

You can add an extra rinse cycle to the default rinse cycle.

Press A and turn B to the desired cycle.

Press .

Press the desired option to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press C.

light will turn on.

Adding extra water to the washing and rinse cycle, WATER PLUS

You can rinse the load more thoroughly by adding extra water to the washing and rinse cycle.

Press A and turn B to the desired cycle.

Press .

Press the desired option button to use the other options.

- Skip to step 4 to use the default setting without changing the options.

Press

light will turn on.

Presetting the start time, DELAY WASH

You can set the desired start time.

Press A and turn B to the desired cycle.

Press the desired option to use the other options.

Press repeatedly to select the desired start

time.

- The set start time appears on the display panel.

- Each press of the button increases the delay time by one hour, up to 19 hours.

Press C.

light will turn on.

Efficiency cleaning, STEAM

Adding the Steam option to these cycles provides superior cleaning performance while reducing energy and water consumption. By using a hot steam spray from above and cooler water below, fabrics get the cleaning benefits of a super hot wash, without the energy usage or potential damage to fabrics.

Press A and turn B to the desired cycle.

Press . The washer will automatically adjust the

cycle settings.

Set any other desired options.

Press C.

WARNING

Do not touch the door during steam cycles.

surface can become very hot. Allow the door lock to release before opening the door.

Do not attempt to override the door lock mechanism

or reach into the washer during a steam cycle.

can cause severe burns.

NOTE

The steam option cannot be used with all cycles.

Steam may not be clearly visible during the steam

cycles. This is normal. Too much steam could damage clothing. Do not use steam with delicate fabrics such as wool,

silk, or easily discolored fabrics.

The door

Steam

USING YOUR WASHING MACHINE

Saving energy, COLDWASH

Adding the COLDWASH™ option reduces energy usage and provides the same washing performance as a warm water wash. By using 6 different washing motion (Tumbling, Rolling, Stepping, Scrubbing, Swing, Filtration), fabrics get the cleaning benefits, without the energy usage.

Press A and turn B to the desired cycle.

Press

settings.

Set any other desired options.

Press C.

NOTE

When you select the COLDWASH™ option, wash time

will be increased up to 10 minutes. For high wash efficiency, it is recommended to use

less than 8 pounds.

. The washer will automatically adjust the cycle

™

Tuning on/off melody and button tones,

SIGNAL ON/OFF

The washing machine plays a melody when the wash cycle is finished. The buttons make a sound each time a button is pressed. The melody and button tones can be turned on and off as desired.

To enable signal off

To enable child lock

Press and hold for 3 seconds during the wash cycle.

- When the CHILD LOCK is enabled, a N message and the remaining wash time are displayed, in turn, on the display panel of the washing machine.

To disable child lock

(When the CHILD LOCK is activated.)

Press and hold

cycle.

NOTE

CHILD LOCK lasts after the end of cycle. If you want to

deactivate this function, Press and hold the PREWASH

button for 3 seconds.

for 3 seconds during the wash

Detecting weight of load, LOAD SIZE

Loading the washing machine and pressing the start button triggers the machine to detect the weight of the load, and

displays the load size icon seconds. If the load size icon

the weight of the load again during the cycle. This feature will help you set the detergent amount so as to wash clothes efficiently based on the detected load size.

Press and hold

- The load size icon

on the display panel for 10

is not on, you can check

for 3 seconds during the cycle.

appears on the display.

Press and hold for 3 seconds during the wash cycle.

- Once signal OFF is set, the signal beeps once.

To enable signal on

(When the-end-of-cycle signal is disabled)

Press and hold

cycle.

- Once signal ON is set, the beeper beeps once.

for 3 seconds during the wash

Setting options during cycle

You can add the desired options during the wash cycle.

Button lock feature, CHILD LOCK

You can lock the washing machine to prevent children or others from changing the cycle settings by pressing the buttons during the cycle.

NOTE

If the washer has detected a small load size, the display

may only show one lighted bar. Only a small amount of detergent should be used, because the amount of clothing and the quantity of water that will be used is small.

The load detection routine only works with dry clothes.

Since the detection system is detecting the WEIGHT of the load, it will be affected by unusually heavy articles in the load. For example, a garment that is already wet that is loaded with other items will cause the LOAD SIZE reading to be inaccurate.

MAINTENANCE

Care

Care after wash

After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture. Leave the door open to dry the washer tub interior. Wipe the body of the washing machine with a dry cloth to remove any moisture.

WARNING

Unplug the washer before cleaning to avoid the risk of

electric shock.

serious injury, fire, electric shock or death.

Never use harsh chemicals, abrasive cleaners, or

solvents to clean the washer. Do not use volatile substances (benzene, paint thinner,

alcohol, acetone, etc.) or detergents with strong chemical components when cleaning the washing machine.

to the machine, or it may cause a fire.

Failure to follow this warning can cause

They will damage the finish.

Doing so may cause discoloration or damage

Press A to turn off the washing machine and pull out

the power plug.

Dry the tub interior of the washer tub with a soft cloth,

and close the door.

Press down hard on the disengage button and pull out

the detergent dispenser drawer.

Drain the water from the detergent dispenser drawer

and dry out each compartment.

Store the washing machine in an upright position.

ENGLISH

Care in cold climates

Storing the washing machine for an extended period of time

Follow the instructions for storing the washing machine if you do not use it for an extended period of time in cold climates below freezing point.

Turn off the faucets connected with the water lines.

Unscrew the water lines from back of the washer.

Empty any water out of the water lines.

Press A.

Open the door and add 1 gallon (3.8 L) of nontoxic

recreational vehicle (RV) antifreeze to the empty washer tub. Close the door.

NOTE

To remove the antifreeze after storing the washing

machine, add detergent to the dispenser, and run one cycle. Do not load any laundry at this time.

When the water line is frozen

Turn off the faucets connected with the water lines.

Pour hot water on the frozen faucets to thaw the water

lines and pull them out.

Immerse the water lines in hot water to thaw them.

Connect the water lines with the water inlets of the

washing machine and faucets.

- See page 14,

Turn on the faucets.

Press A.

Turn

Press C.

- Verify the water fills properly.

Connecting the water lines

RINSE + SPIN.

for details.

Press for draining and spinning.

Press C.

- Drain the water from the washing machine for 1 minute. Not all of the RV antifreeze will be expelled.

MAINTENANCE

When the Drain Line is Frozen

Pour hot water in the washer tub and close the door.

- Leave it for 10 minutes.

Press A after 10 minutes.

Press for draining and spinning.

Press C.

- Check if the water drains.

Cleaning

Periodically clean the washing machine to maintain its performance and to prevent malfunction.

Clean your the drum, TUB CLEAN

Using the washing machine in a humid space for a long period of time may lead to a buildup of black mold and germs in the air inside the washer tub and affect your health. If you clean the washer tub regularly on a monthly basis using TUB CLEAN it will keep the washer tub clean for hygienic use.

Add tub cleaner or lime scale remover into the detergent

dispenser drawer.

- Do not exceed the maximum detergent limit line when you add it. Detergent may remain in the washer tub after cleaning.

When you use liquid chlorine bleach,

liquid chlorine bleach compartment.

When you use a powdered cleaner,

detergent cup and add it into the main wash detergent compartment.

When you use cleaning tablets,

the washer tub. (Do not add tablet cleaner to the drawer.)

load it into the

pull out the liquid

place them directly into

Press A.

Press and hold for 3 seconds to select TUB

CLEAN.

- O message appears in the display.

- The indication light for TUB CLEAN turns on.

Press C.

NOTE

Never load laundry while using TUB CLEAN. The

laundry may damage or become contaminated. Make sure to clean the washer tub when it is empty. It is recommended to leave the door open after

finishing the laundry to keep the tub clean. It is recommended that TUB CLEAN should be

repeated monthly. If mildew or musty smell already exists, run TUB

CLEAN for 3 consecutive weeks. Safely and conveniently secure the door slightly ajar

with a magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry.

+ 90 hidden pages