LG WM3488HW/00, WM3488HS/00 Owner’s Manual

OWNER’S MANUAL
WASHING MACHINE
WM3488H*
www.lg.com
Please read this owner’s manual thoroughly before operating and keep it handy for reference at all times.
MFL63288674
ESPAÑOL FRANÇAIS
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 IMPORTANT SAFETY INSTRUCTIONS
4 BASIC SAFETY PRECAUTIONS 5 GROUNDING INSTRUCTIONS 6 SAFETY INSTRUCTIONS FOR INSTALLATION 7 SAFETY INSTRUCTIONS FOR USE, CARE,
CLEANING, AND DISPOSAL
8 PRODUCT OVERVIEW
8 Parts 8 Accessories 9 Control Panel Features
11 INSTALLATION
11 Installation Overview 12 Choosing the Proper Location 13 Unpacking and Removing Shipping Bolts 14 Connecting the Water Lines 15 Connecting the Drain Line 16 Leveling the Washer 17 Connecting to the Power Supply 17 Testing the Washer
18 PREPARATION
18 Sorting Wash Loads 19 - Fabric Care Labels 19 - Sorting Laundry 20 Using Detergent/Fabric Softener 20 - Recommended Detergent 20 - Loading the Dispenser
22 OPERATION
22 Using the Washer 23 Cycle Guide 24 Wash Cycles 24 - Sanitary: Reducing Laundry Bacteria 24 - Baby Wear: Lightly Soiled Baby Clothes 24 - Bulky/Large: Blankets or Bulky Items 24 - Heavy Duty: Heavily Soiled Items 24 - Perm. Press: Wrinkle-Free Items 24 - Cotton/Normal: Normal Items 24 - Sports Wear: High-Performance Fabrics 24 - Hand Wash/Wool: Items Labeled Wool or
Hand-Wash
24 - Delicates: Sheer Items 24 - Speed Wash: Washing Quickly
24 - Wash+Dry: A Small Load which Can Be
Tumble Dried
24 - Drain+Spin: Drain and Spin Only 25 Cycle Modifier Buttons 25 Setting Options Before Cycle 25 - Soil Level 25 - Temp. 25 - Spin Speed 26 - Dry 26 - Delay Wash 26 - Water Plus 27 - Rinse+Spin 27 - Extra Rinse 27 - Pre Wash 28 Setting Options During Cycle 28 - Child Lock 28 - PGM Save 28 - Custom PGM 28 Adding Garments
29 MAINTENANCE
29 Regular Cleaning 29 - Care After Wash 29 - Care in Cold Climates 30 Cleaning 30 - Tub Clean 31 - Cleaning the Detergent Dispenser Drawer 32 - Cleaning the Water Inlet Filters 33 - Cleaning the Drain Pump Filter 34 - Cleaning the Door Seal
35 TROUBLESHOOTING
35 Checking Error Messages 36 Before Calling for Service
38 SPECIFICATIONS
39 USING SMART DIAGNOSIS™
40 USING THE TAG ON FUNCTION
41 WARRANTY
3
PRODUCT FEATURES
PRODUCT FEATURES
INVERTER DIRECT-DRIVE MOTOR
The inverter direct drive motor, which is directly connected to the drum, is capable of producing multiple
distinct motions for optimal wash performance with very little noise and vibration. The motor assembly also contains fewer moving parts, resulting in fewer repairs.
SMART DIAGNOSIS™
Should you experience any technical difficulty with your washing machine, it has the capability of
transmitting diagnostic data to your smart phone via a free app or directly to the Customer Information Center for quick and efficient troubleshooting (refer to page 39).
TUB CLEAN
Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and fresh.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air
circulation and allow the interior of the machine to dry. To use this feature, remove the clean laundry then position the door so that the door is almost closed. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.
LARGE CAPACITY STAINLESS STEEL DRUM
The large capacity stainless steel drum offers extreme durability and is tilted to improve efficiency and
allow easier access for large items.
CHILD LOCK
Use this option to disable the controls during a wash cycle. This option can prevent children from
changing cycles or operating the machine.
DETERGENT DISPENSER DRAWER
The four-compartment dispenser drawer makes it easy to separate the pre-wash detergent, the main
laundry detergent, liquid bleach, and fabric softener into different compartments and will be dispensed automatically at the appropriate time.
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.
These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following :
• Use this appliance only for its intended purpose as
described in this owner’s manual.
Before use, the washer must be properly installed as described in this manual.
Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite
or explode.
Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.
Before the washer is removed from service or discarded, remove the lid to prevent children from climbing inside.
Do not install or store the washer where it will be exposed to the weather or freezing temperatures.
Do not tamper with controls.
Keep the area underneath and around your
appliances free of combustible materials (lint, paper,
rags, etc.), gasoline, chemicals and other flammable vapors and liquids.
Do not repair or replace any part of the washer or attempt any servicing other than as described in this manual. We strongly recommend that any service be
performed by a qualified technician.
See Installation Instructions for grounding requirements.
ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a load to catch fire.
Use fabric softeners or products to eliminate static only as recommended by the manufacturer.
• This washer is not designed for maritime use or for
mobile installations such as in RVs, aircraft, etc.
Turn off the water faucets and unplug the washer if the machine is to be left for an extended period of time, such as during vacations.
• Packaging material can be dangerous for children.
There is a risk of suffocation! Keep all packaging from children.
Always check the inside of the washer for foreign objects before loading laundry. Keep the lid closed when not in use.
Do not reach into the appliance if the tub or agitator is moving.
WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands
after handling.
5
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or servicer if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause serious injury, fire, electric shock, or death.
6
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following :
Refer to the INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation
instructions are packed with the washer for the installer’s reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service technician. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
For personal safety, this appliance must be properly grounded. Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to
minimize the possibility of electric shock from this appliance.
This washer must be plugged into a 120 VAC, 60 Hz grounded outlet. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow
this warning can cause serious injury, fire, electric shock, or death.
Do not install on carpet. Install washer on a solid floor. Failure to follow this warning can cause
serious leak damage.
Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong outlet. Failure to follow these warnings can cause
serious injury, fire, electric shock, or death.
The washer should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating plate. This
provides the best performance and also
prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
Never unplug your washer by pulling on the power cord. Always grip the plug firmly and
pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. Failure
to follow this warning can cause serious injury, fire, electric shock, or death.
When installing or moving the washer, be careful not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
The washer must be installed and electrically grounded by a qualified service person in accordance with local codes to prevent shock
hazard and assure stability during operation.
The washer is heavy. Two or more people may be needed to install and move the appliance. Failure
to do so can result in back or other injury.
Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions. Failure to follow
this warning can cause serious leak damage.
To reduce the risk of electric shock, do not install the washer in humid spaces. Failure to follow
this warning can cause serious injury, fire, electric shock, or death.
To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety
warnings in this manual could result in property damage, injury to persons or death.
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not
contact the following parts while the appliance is energized: pump, valve, motor, control board, drying heater.
7
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following :
SAVE THESE INSTRUCTIONS
Unplug the washer before cleaning to avoid the
risk of electric shock.
Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage
the finish.
Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors
that could ignite the materials.
Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil
after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.
Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Do not combine laundry products for use in one load unless specified on the label.
Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products. Incorrect usage can
produce poisonous gas, resulting in serious injury or death.
Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, press the START/PAUSE button and allow the drum to coast to a complete stop before reaching inside. Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances. Failure to comply with these
warnings could result in serious injury to persons or death.
Destroy the carton, plastic bag, and other packing materials after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers. Failure to comply with these
warnings could result in serious injury to persons or death.
Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on product labels. Failure to comply with these
warnings could result in serious injury to persons or death..
Before your washer is removed from service or discarded, remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside Failure to do
so can result in serious injury to persons or death.
Make sure the dispenser drawer is closed at all times when not being filled with laundry products.
Failure to keep the drawer closed can result in personal injury or flooding.
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not
contact the following parts while the appliance is energized: pump, valve, motor, control board, drying heater.
8
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Parts
Accessories
NOTE
Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are
ü
missing. For your safety and for extended product life, use only authorized components. The manufacturer
ü
is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts. The images in this guide may be different from the actual components and accessories, and are subject
ü
to change by the manufacturer without prior notice for product improvement purposes.
or
Hot/cold water hoses Non-skid pads
Caps for covering
shipping bolt holes
Wrench Tie strap
Elbow bracket
(for securing drain hose)
Included Accessories
Detergent
dispenser
drawer
(See page 20)
Door
Control panel (See page 9)
Leveling feet
Drain pump filter cover
Drain pump filter
Drain hose
Water inlets
Shipping
bolts
Power cord
Drain hose
Large-capacity stainless steel drum
Inverter direct­drive motor
9
PRODUCT OVERVIEW
Control Panel Features
Operation
Button Description
Turns the washing machine on and off.
ü
(During the wash cycle) stops operation, and cancels the settings.
ü
Tub Clean
ü
- For tub clean (see page 30).
Sanitary
ü
- For underwear, diapers, etc. (see page 24).
Baby Wear
ü
- For lightly soiled baby clothes (see page 24).
Bulky/Large
ü
- For blankets or large, bulky items (see page 24).
Heavy Duty
ü
- For heavily soiled cotton fabric (see page 24).
Perm. Press
ü
- For wrinkle-free fabric (see page 24).
Cotton/Normal
ü
- For general laundry, such as cotton T-shirts or towels (see page 24).
Sports Wear
ü
- For high-performance fabrics which need special care (see page 24).
Hand Wash/Wool
ü
- For wool or hand-wash fabrics (see page 24).
Delicates
ü
- For sheer and delicate fabrics (see page 24).
Speed Wash
ü
- For small quantities of lightly soiled items (see page 24).
Wash+Dry
ü
- For a small load which can be washed and dried in the same cycle (see page 24).
Drain+Spin
ü
- For items that only require draining and spinning (see page 24). Starts or pauses the wash cycle.
ü
- If you do not press the Start/Pause button within 4 minutes of selecting a cycle, the washing machine will turn off automatically and all settings will be lost.
(Press repeatedly) Selects a wash cycle by soil level (see page 25).
ü
- Selects soil level from 3
settings.
(Press repeatedly) Selects the water temperature for the wash cycle (see page 25).
ü
- Select water temperature from 5 settings.
(Press repeatedly) Selects the spin speed (see page 25).
ü
- Selects spin speed from 5 settings.
(Press repeatedly) Selects a dry cycle. Pressing this button enables drying.
ü
(See page 26).
Operation Custom PGM Button Display
Cycle selector
Soil Level Selection Button
Dry Selection Button
Spin Speed Selection Button
Pre Wash Button
Water Temperature Selection Button
Start/ Pause Button
Power Button
10
PRODUCT OVERVIEW
Operation (continued)
Button Description
Set the delay time of starting the cycle (see page 27).
ü
Use this option to add extra water to the wash and rinse cycles for
ü
better wash performance with large or bulky items.
Use this option to save a special combination of settings that you use
ü
frequently. (See page 28).
Use this option to rinse detergent from the load. (See page 27).
ü
(Press before wash cycle) Add an extra rinse to the selected cycle (see page 27).
ü
(Press and hold during wash cycle) The drum is equipped with a
ü
white LED light that illuminates when the washer is turned on. (See page 28).
(Press before wash cycle) Pre-wash heavily soiled laundry (see page 27).
ü
(Press and hold during wash cycle) Lock/Unlock the buttons (see page 28).
ü
Display
Door lock indicator
Child lock indicator
Cycle process indicator
Estimated time remaining/ error message display (See page 35)
Display Icon Description
This portion of the display shows which stage of the wash cycle is
ü
currently underway (Wash, Rinse, Spin, Dry).
This indicator shows that the door is locked. The washer door will lock while
ü
the washer is operating. The door can be unlocked by pressing the START/ PAUSE button to stop the washer.
This indicator shows that the washer has been set for Child Lock. The
ü
Child Lock function locks the buttons on the control panel to prevent them from being used.
When the START/PAUSE button is pressed, the washer automatically
ü
detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.
11
INSTALLATION
INSTALLATION
Installation Overview
WARNING
Washer is heavy! Two or more people are required when moving and unpacking the washer.
ü
Failure
to follow this warning can result in back or other injury.
Store and install the washer where it will not be exposed to temperatures below freezing or exposed
ü
to outdoor weather conditions.
Failure to follow this warning can cause serious injury, fire, electric
shock, or death.
Properly ground washer to conform with all governing codes and ordinances.
ü
Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
To reduce the risk of electric shock, do not install the washer in humid spaces.
ü
Failure to follow this warning can cause serious injury, fire, electric shock, or death. The base opening must not be obstructed by carpeting when the washer is installed on a carpeted
ü
floor.
Do not remove ground prong. Do not use an adapter or extension cord. Plug into a grounded 3-prong
ü
outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Choosing the proper
location
Unpacking and removing
shipping bolts
Connecting
the water line
Connecting
the drain line
Leveling the washer
Connecting to the
power supply
Testing the washer
12
INSTALLATION
Choosing the Proper Location
Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and unpacking the washing machine.
3
Allow for sufficient space between the walls and the washing machine for installation.
Space Requirements
You must allow sufficient space for water lines, the drain line, and airflow.
NOTE
Be sure to allow for wall, door, or floor
ü
moldings that may incr he required clearances.
Clearances
21.6" (54.86 cm)
25.2" (64 cm)
45" (114.3 cm)
33.5" (85.09 cm)
3.5" (8.89 cm)
24" (60.96 cm) 1" (2.5 cm)1" (2.5 cm)
NOTE
The floor must be strong and rigid enough to
ü
support the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid. A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house. Before installing the washer, make sure the
ü
floor is clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor. If a drip pan must be used, take extra care
ü
to follow the instructions provided with the drip pan and make sure the leveling feet are adjusted for firm and even contact with the pan. Use of drip pans and failure to properly level the machine may result in increased vibration and noise during operation.
13
INSTALLATION
1
Starting with the bottom two shipping bolts, use the wrench (included) to fully loosen all four shipping bolts by turning them counterclockwise. Remove the bolt assemblies by wiggling them slightly while pulling them out.
2
Locate the four hole caps included in the accessory pack and install them in the shipping bolt holes.
Cap
NOTE
Save the bolt assemblies for future use. To
ü
prevent damage to internal components, do not transport the washer without reinstalling the shipping bolts. Failure to remove shipping bolts and retainers
ü
may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.
Unpacking and Removing Shipping Bolts
Remove the washer from the carton base.
If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. Do not lay the washer on its front or back.
Carton Base
14
INSTALLATION
4
Connect the hoses to the water inlets tightly by hand and then tighten another 2/3 turn with pliers.
- Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.
Cold
water
inlet
Hot water inlet
WARNING
Do not overtighten the hoses.
ü
Overtightening can damage the valves resulting in leaking and property damage.
5
Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 4 again.
NOTE
For your safety, and for extended product
ü
life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased, unauthorized parts. Use new hoses when installing the washing
ü
machine. Do not reuse old hoses. Contact LG Customer Service for Assistance
ü
in buying hoses : 1-800-243-0000. Periodically check the hoses for cracks,
ü
leaks and wear, and replace the hoses every 5 years. Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects. Water supply pressure must be between 20
ü
psi and 120 psi (138 – 827 kPA). If the Water supply pressure is more than 120 psi, a Pressure reducing valve must be installed. To provide optimum washing performance
ü
the hot water temperature should be set at 120 – 135
°F (48-57°C) and the cold at 60°F
(15°C).
Connecting the Water Lines
1
Check the rubber seals on both sides of the hose.
- Insert a rubber seal into the threaded fittings on each hose to prevent leaking.
Rubber seal
Water hose (To water inlet on the washing machine)
Rubber seal
Water hose (To faucet)
2
Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.
- Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.
WARNING
Do not overtighten. Damage to the coupling
ü
can result.
3
After connecting the inlet hoses to the water faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let the water drain into a bucket, and check the water temperature.
15
INSTALLATION
Connecting the Drain Line
Secure the drain hose in place to prevent moving and leaking.
NOTE
The drain hose should be properly secured.
ü
Failure to properly secure the drain hose can result in flooding and malfunction. Total height of the hose end should not exceed
ü
96 inches (244.8 cm) from the bottom of the washer. The drain must be installed in accordance with
ü
any applicable local codes and regulations. Make sure that the water lines are not
ü
stretched, pinched, crushed, or kinked.
Using a Standpipe
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.
No more than 4 inches (10 cm)
Elbow bracket
2
Insert the end of the drain hose into the standpipe.
Drain Hose
Elbow Bracket
3
Use a tie strap to secure the drain hose in place.
Using a Laundry Tub
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.
No more than 4 inches (10 cm)
Elbow bracket
2
Hang the end of the drain hose over the side of the laundry tub.
Elbow Bracket
Drain Hose
3
Use a tie strap to secure the drain hose in place.
16
INSTALLATION
Leveling the Washer
The drum of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid.
1
Check that the washing machine is level.
- Ensure it is level by rocking the top edges of the washing machine or placing a level on the washing machine. The slope beneath the washing machine must not exceed 1°, and all four leveling feet must rest firmly on the floor.
Level
2
Turn the lower leveling feet clockwise to level
the washing machine.
- Turning the lower leveling feet clockwise raises the washing machine.
Raise Lower
3
Turn the locknuts counterclockwise and tighten them when the washing machine is level.
Tighten all 4 lock
nuts securely using
the wrench.
4
Check again to make sure the machine is level.
- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock.
-
If the washing machine rocks, repeat steps 1 to 3.
WARNING
Using the washing machine without leveling,
ü
it may result in malfunction caused by the production of excess vibration and noise. If you are installing the washing machine
ü
on the optional pedestal, you must adjust the leveling feet on the pedestal to level the washing machine. The washing machine´s leveling feet should be minimized and the locknuts turned counterclockwise to secure them. Use the leveling feet only when you level the
ü
washing machine. If you raise the leveling feet unnecessarily, it may cause abnormal vibration of the washing machine.
Using Non-Skid Pads (Optional)
If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, lay the non-skid pads under the leveling feet and adjust the level.
1
Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip.
2
Adjust the level after placing the washing machine in the installation area.
3
Place the adhesive side of the non-skid pad on the floor.
- It is most effective to install the non-skid pads under the front legs. If it is hard to place the pads under the front legs, place them under the back legs.
Remove backing
This side up
Adhesive side
4
Check the washing machine’s level again.
- Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.
17
INSTALLATION
Connecting to the Power Supply
Make sure to ground the washing machine to prevent a short circuit or an electric shock when plugging in.
Using a 3-Prong Outlet
If plugged into a grounded, 3-prong outlet rated for use with this appliance, no further grounding is necessary.
WARNING
The power outlet must be within 60 inches (1.5
ü
m) of either side of the washer. The appliance and outlet must be positioned
ü
so that the plug is easily accessible. Do not overload the outlet with more than one
ü
appliance. The outlet must be grounded in accordance
ü
with current wiring codes and regulations. Time-delay fuse or circuit breaker is
ü
recommended. It is the personal responsibility and obligation
ü
of the product owner to have a proper outlet installed by a qualified electrician. Do not use a worn or damaged power cord
ü
or power plug. Replace or repair worn or damages cords or plugs it immediately. Failure to do so may result in death, fire, electric shock, or malfunction. Do not modify the power cord and take care
ü
not to damage it when installing or moving the washing machine. Failure to follow this warning may result in death, fire, electric shock, or malfunction. Make sure that the washing machine is
ü
grounded. Connect this washing machine to a grounded
ü
outlet conforming to the rating prior to use. Failure to do so may result in fire, electric shock, or malfunction. Do not use adaptors or extension cords. The
ü
washing machine should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. Failure to do so may result in fire, electric shock or malfunction. Do not damage or cut off the ground prong of
ü
the power cord. Doing so may cause death, fire, electric shock, or product malfunction.
Testing the Washer
Check if the washing machine is properly installed and run a test cycle.
1
Load the washing machine with 6 pounds of laundry (approximately 14 shirts).
2
Press the Power button and turn the cycle selector knob to the right.
3
Press the Rinse+Spin button to select Rinse+Spin.
4
Press the Start/Pause button.
- The wash cycle starts.
5
Check if water is supplied, that the washing machine does not rock or vibrate excessively, and that it drains well during the spin cycle.
- If water leaks during water supply, see page 14, Connecting the water lines, to connect them properly.
- If the washing machine rocks and vibrates excessively, see page 16, Leveling the washing machine, to level it again.
- If the drain does not work, see page 15, Connecting the drain line, to install it properly.
18
PREPARATION
Check all pockets to make sure that they are
empty.
-Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes.
Close zippers, hooks, and drawstrings to prevent
these items from snagging or tangling on other clothes.
Pretreat heavily stained areas before washing.
- Doing so will produce clean, stain-free results.
Combine large and small items in a load. Load
large items first.
Large items should not be more than half of the
total washload.
The washer can be fully loaded, but the drum
should not be tightly packed with items.
-The door of the washer should close easily.
Do not wash single items, except for bulky items
such as blankets. Make sure to wash laundry in similar types of loads.
- Washing a single small item may result in the tub becoming unbalanced, vibrating and making a noise.
Do not wash waterproof clothes.
- This may cause abnormal vibration, or may cause the load to bounce, which could damage the tub.
Check if there are any foreign objects in the door
seal and take extra care that clothes do not get caught there.
- Foreign objects in the door seal may stain clothes, and water may leak if clothes get caught in the door seal.
Wash underwear or small, light items in a laundry
net (mesh bag).
- Small, light items may get caught in the door seal, and a brassiere hook may damage other items or the tub.
Brush heavy soil, dust, or hair off fabrics before
washing.
- Laundry may not wash clean if there is dirt or sand on the fabrics, or items may be damaged due to particles rubbing against sheer fabrics.
Wash blankets individually.
- Washing more than one blanket in a load may produce inferior results due to tangling or an unbalanced load.
Always separate fabrics according to their colors
and wash them separately to prevent colors from running.
- Fabrics may be damaged or become stained due to fabric dyes running, or due to foreign objects transferring from one fabric to another.
For best performance, load clothes as shown.
1
3
2
4
- Load clothes loosely, and do not overfill the
drum. Clothes need room to circulate in order to get clean.
- Do not press down on items while stacking
them in the drum.
PREPARATION
Sorting Wash Loads
Read and observe the following to prevent shrinkage or damage to clothes.
19
PREPARATION
Category Label Directions
Washing
Hand Wash
Machine Wash, Normal Cycle
Use Permanent Press/ Wrinkle Resistant washing machine setting (which has a cool down or cold spray before the reduced spin)
Use Gentle/Delicate washing machine setting (slow agitation and/ or reduced wash time).
Do Not Wash
Do Not Wring
Water
Temperature
Hot
Warm
Cold/Cool
Bleach
symbols
Any Bleach (When Needed)
Only Non-Chlorine Bleach (When Needed)
Do Not Bleach
Colors Whites / Lights / Darks Soil Heavy / Normal / Light Fabric Delicates / Easy Care / Sturdy
Cottons
Lint Lint Producers / Lint Collectors
Fabric Care Labels
Most articles of clothing feature fabric care labels that include instructions for proper care.
Sorting Laundry
Sort laundry into similar loads that are washable in the same cycle. Refer to the following chart for sorting clothes.
20
PREPARATION
Loading the Dispenser
The detergent dispenser drawer of the washing machine has a dispenser compartment for each detergent type. Add each detergent to its appropriate compartment.
1
Pull out the detergent dispenser drawer.
2
Add each detergent to its appropriate compartment.
- If you use a liquid detergent, check if the liquid detergent cup is in place.
- If you use a powdered detergent, remove the liquid detergent cup and put the powder in the main wash detergent compartment.
Main wash detergent compartment
Pre-wash detergent compartment
Liquid fabric
softener
compartment
3
Close the detergent dispenser drawer slowly.
- Slamming the detergent dispenser drawer may result in the detergent overflowing into another compartment or pouring into the tub earlier than programmed.
NOTE
It is normal for a small amount of water to
ü
remain in the dispenser compartments at the end of the cycle.
Using Detergent/Fabric Softener
Recommended Detergent
Make sure to use HE (High-Efficiency) detergent for front-loading washing machines. HE detergents dissolve more efficiently and produce fewer suds to ensure efficient washing and rinsing. Use the correct amount of detergent as indicated on the detergent packaging.
Specially designed to use only HE (High-Efficiency) detergent
NOTE
Only use HE detergents, because using a
ü
regular detergent may produce excessive suds. HE detergents produce fewer suds, dissolve
ü
more efficiently to improve washing and rinsing performance, and help to keep the interior of your washer clean. Use less detergent for soft water.
ü
Wipe up any spills immediately, as liquids
ü
could damage the finish and the control panel of the washing machine. Using too much detergent can cause a build-
ü
up in the tub resulting in unsatisfactory performance and machine malfunction. If you use a detergent that does not dissolve
ü
easily or a detergent with high viscosity, it will leave a residue on the tub, which may not rinse properly.
21
PREPARATION
Fabric Softener Compartment
This compartment holds liquid fabric softener, which will be automatically dispensed during the final rinse cycle.
NOTE
Always follow the manufacturer’s
ü
recommendations when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result in stained clothes. Dilute concentrated fabric softeners with warm
ü
water. Do not exceed the maximum fill line. Never pour fabric softener directly onto the
ü
load or into the drum.
Pre-Wash Detergent Compartment
Add liquid or powdered detergent to this compartment when using the Pre-Wash option. Always use HE (High-Efficiency) detergent with your washing machine.
NOTE
When using the pre-wash option, if liquid
ü
detergent is to be used for the main wash, the liquid detergent cup accessory must be used in the main wash dispenser, to prevent the main wash liquid detergent from being dispensed immediately. The amount of detergent added for
ü
the Pre-Wash option is 1/2 the amount recommended for the main wash cycle. For example, if the main wash cycle requires one measure of detergent, add 1/2 measure for the Pre-Wash option.
Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle. Always use HE (High-Efficiency) detergent with your washing machine. Never exceed the manufacturer’s recommendations when adding detergent. Using too much detergent can result in detergent buildup on clothing and the washer. Either powdered or liquid detergent may be used.
NOTE
Liquid or powdered color-safe bleach may be
ü
added to the main wash compartment with detergent of the same type. When using liquid detergent, make sure the
ü
liquid detergent cup and insert are in place. Do not exceed the maximum fill line. When using powdered detergent, remove
ü
the insert and liquid detergent cup from the compartment. Powdered detergent will not dispense with the liquid detergent cup and insert in place.
22
OPERATION
OPERATION
Using the Washer
Load the laundry into the washing machine and close the door.
1
2
3
4
5
6
Press the Power button.
- The lights around the cycle selector knob will illuminate and a chime will sound.
Turn the cycle selector knob in either direction to select the desired cycle.
- The proper default option is automatically set according to the wash cycle. See page 23, Cycle Guide, for more detailed default options for each cycle.
- See page 24, Wash Cycles, for details on the wash cycles.
- To change the options, press the option button and select the desired option. See page 25, Setting Options Before Cycle, for more details on options.
- Skip to step 4 to use the default setting without changing the options.
Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser drawer.
-
See page 20, Using Detergent/Fabric Softener, for more details on using detergent.
Press the Start/Pause button.
- The washing machine will start.
When the melody plays, the wash cycle is finished.
- When the washing cycle is finished, the door will unlock. Open the door and remove the laundry immediately.
- Make sure to check around the door seal when taking out the finished load. Small items may be caught in the door seal.
NOTE
The front-load washing machine rotates the laundry in a way that allows it to use less water while still
ü
fully saturating your clothing. It is normal to not be able to see water during the wash cycle. If the temperature or the water level inside the machine is too high, the door locks and cannot be
ü
opened. To open the door while washing, use the Rinse + Spin feature.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
ü
INSTRUCTIONS before operating this appliance.
23
OPERATION
Cycle Guide
The cycle guide below shows the options and recommended fabric types for each cycle. ò = Available option
- Cycle time depends on water pressure, type and amount of load, and chosen additional options.
-
To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.
CYCLE FABRIC TYPE
BASIC OPTION (Í=DEFAULT)
ADDITIONAL OPTIONS
Soil
Level
Temp.
Spin
Speed
Delay Wash
Water
Plus
Rinse+
Spin
Extra Rinse
Pre
Wash
Dry
Tub Clean Removes residue and odors
from washer drum
Normal
Í
Extra HotÍMedium
Í
Sanitary Heavily soiled underwear,
work clothes, diapers, etc.
Heavy Normal
Í
Extra HotÍExtra High
Í
High Medium Low No Spin
ò ò ò ò ò ò
Baby Wear Lightly soiled baby clothes
Heavy Normal
Í
Hot
Í
Warm
High
Í
Medium Low No Spin
ò ò ò ò ò ò
Bulky/ Large
Large items such as blankets and comforters
Heavy Normal
Í
Light
Warm
Í
Cold Tap Cold
High Medium
Í
Low No Spin
ò ò ò ò
Heavy Duty Heavily soiled cotton fabrics Heavy
Normal
Í
Light
Hot Warm
Í
Extra High High Medium
Í
Low No Spin
ò ò ò ò ò ò
Perm. Press
Dress shirts/pants, wrinkle free clothing, poly/cotton blend clothing, tablecloths
Heavy Normal
Í
Light
Warm
Í
Cold Tap Cold
Extra High
Í
High Medium Low No Spin
ò ò ò ò ò ò
Cotton/ Normal
Cotton, linen, towels, shirts, sheets, jeans, mixed loads
Heavy Normal
Í
Light
Hot Warm
Í
Cold Tap Cold
Extra High High
Í
Medium Low No Spin
ò ò ò ò ò ò
Sports Wear High-performance fabrics that
need special care
Heavy Normal
Í
Light
Warm
Í
Cold Tap Cold
Medium
Í
Low No Spin
ò ò ò ò
Hand Wash/ Wool
Items labeled "hand washable"
Heavy Normal
Í
Warm
Í
Cold Tap Cold
Medium
Í
Low No Spin
ò ò ò ò
Delicates Dress shirts/blouses nylons,
sheer or lacy garments
Heavy Normal
Í
Warm Cold
Í
Tap Cold
Medium
Í
Low No Spin
ò ò ò ò
Speed Wash
Lightly soiled clothing and small loads
Heavy Normal
Í
Warm Cold
Í
Tap Cold
Extra High High Medium
Í
Low No Spin
ò ò ò ò ò ò
Wash+Dry A small load which can be
washed and dried in one cycle
Heavy Normal
Í
Light
Hot Warm
Í
Cold Tap Cold
Extra High
Í
High
ò ò ò ò ò
Drain+Spin Drain and spin only Extra High
Í
High Medium Low No Spin
ò
24
OPERATION
Hand Wash/Wool:
Items Labeled Wool or
Hand-Wash
This cycle is for washing shrinkable woolen or hand-washable items requiring delicate care. Only wash woolen items that are labeled machine washable or hand-washable.
NOTE
Laundry weight should be less than 8 pound
ü
(3.6 kg) to prevent damage to the fabric. Use only natural or wool-safe detergent
ü
harmless to fabrics and load 1/2 of the normal amount of detergent. The Hand Wash/Wool cycle uses a gentle
ü
tumble rotation angle and low speed spin for the ultimate fabric care.
Delicates:
Sheer Items
This cycle is for washing lingerie or sheer and lacy clothes which can easily be damaged.
Speed Wash:
Washing Quickly
Use the Speed Wash cycle to quickly wash lightly soiled clothing and small loads. For high wash and rinse efficiency, wash small loads of 2-3 lightly soiled garments
NOTE
Use very little detergent in this cycle. For
ü
additional rinsing, add an extra rinse using the option button.
Wash+Dry:
A Small Load Which Can Be
Tumble Dried
This cycle washes and dries clothing in one continuous cycle.
Drain+Spin:
Drain and Spin Only
This cycle is for draining and spinning without the wash and rinse cycle, or for removing the load from the washing machine in the middle of the cycle.
Wash Cycles
You can wash laundry items more thoroughly by selecting the wash cycle that best suits the type of items to be washed. Turn the cycle selector knob in either direction to select the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 22, Using the Washer, for more details on operating methods.
Sanitary:
Reducing Laundry Bacteria
This wash cycle helps to remove heavy soil on laundry through high temperature.
Baby Wear:
Lightly Soiled Baby Clothes
This cycle helps remove food stains from baby clothes using a powerful rinse.
Bulky/Large:
Blankets or Bulky Items
This cycle is for washing blankets or bulky items.
Heavy Duty:
Heavily Soiled Items
This cycle is for washing heavily soiled laundry through more powerful drum rotation.
Perm. Press:
Wrinkle-Free Items
This cycle is for washing items such as wrinkle-free clothes or tablecloths to minimize wrinkles.
Cotton/Normal:
Normal Items
Use this cycle to wash all normal items, except delicate fabrics such as wool or silk.
NOTE
If you press the Power button and the Start/
ü
Pause button without selecting another cycle, the washing machine defaults to the Cotton/ Normal cycle.
Sports Wear:
High-Performance Fabrics
Use this cycle for garments that are specially designed and treated for sports.
25
OPERATION
Cycle Modifier Buttons
Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.
NOTE
To protect your garments, not every wash/
ü
rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details
Setting Options Before Cycle
You can select and add the desired optional functions before you start the washing machine.
Soil Level
You can wash your laundry more thoroughly by setting the proper soil level on the washing machine.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Press the Soil Level button repeatedly to select a soil level.
- When you press the button, an indicator light for the corresponding selection will turn on in the display.
3
You can now modify other cycle settings and add options (see pages 25-28), or proceed to step 4 to begin the cycle.
4
Press the Start/Pause button.
NOTE
This feature will add time time for heavily
ü
soiled loads or subtract time for lightly soiled loads.
Temp.
Set the water temperature for the wash cycle. Set the appropriate temperature, as specified in the fabric care label.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Press the Wash Temp button repeatedly to select the desired water
temperature:
- When you press the button, an indicator light for the corresponding selection will turn on in the display.
3
You can now modify other cycle settings and add options (see pages 25-28), or proceed to step 4 to begin the cycle.
4
Press the Start/Pause button.
NOTE
Cold rinses use less energy.
ü
Your washer features a heating element to
ü
boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings. Select the water temperature suitable for
ü
the type of load you are washing. Follow the fabric care label for best results.
Spin Speed
You can set the desired spin speed. Use this feature properly according to the characteristics of the load.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Press the Spin Speed button repeatedly to select the desired spin speed.
- When you press the button, an indicator light for the corresponding selection will turn on in the display.
3
You can now modify other cycle settings and add options (see pages 25-28), or proceed to step 4 to begin the cycle.
4
Press the Start/Pause button.
NOTE
The Spin Speed button also activates the
ü
Drain & Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended.
26
OPERATION
Dry
Press the Dry button to select drying options.
• For consistently dry loads, all articles in the load
should be similar in material and thickness.
• Do not overload the drum. Items must have room
to tumble freely.
• Press Start/Pause to remove items before the dry
cycle has finished.
Press the Dry button repeatedly to toggle through the selections:
By pressing the Dry button, you can select: LOW TEMP - For delicate fabrics DAMP - For damp drying fabrics NORMAL - For general drying MORE - For heavier fabrics 30/60/90/120 - For timed drying
NOTE
The capacity of the machine for washing ü clothes is twice as much as when drying clothes. If the machine is to be used to dry a load, then the wash load must be reduced by half for effective drying performance. If a full load is washed, remove half the clothes prior to starting the dry cycle.
Drying Guide–Automatic Dry
Electronic sensors measure the temperature of the exhaust to increase or decrease the drying temperature for faster reaction time and tighter temperature control.
Recommended DRY settings by fabric type:
a) Perm Press – LOW TEMP b) If clothes are to be ironed – DAMP c) Cotton/Towels – NORMAL d) Diapers – MORE
NOTE
On Automatic Dry settings, the estimated
ü
drying time may vary from the actual drying time. The type of fabric, size of the load, and the selected dryness level affect drying time.
Drying Guide–Timed Dry
• Press the Dry button repeatedly to select the
drying time in 30 minute increments: 30–60–90–120 minutes.
• Timed dry can last up to 120 min. When selecting
Dry only, drying will start after the final Spin cycle.
• The time required to dry a load can vary greatly
depending on dampness, room temperature, and type of fabric. You may need to add additional time. Your own experience will be your best guide.
Drying Tips
Woolen Articles
Do not tumble dry woolen articles. Block them (pull them to their original shape) and dry them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may shrink when dried.
• Always stretch them out immediately after
drying.
Permanent Press and Synthetics
• Do not overload the dryer.
• To reduce wrinkles, take out permanent press
articles as soon as the dryer stops.
Fiber or Leather Materials
Always check the manufacturer’s instructions.
Baby Clothes and Night Gowns
Always check the manufacturer’s instructions.
Rubber and Plastics
Do not dry any items made from or containing rubber or plastics, such as:
a) Aprons, bibs, chair covers b) Curtains and tablecloths c) Bathmats
Fiberglass
Do not dry fiberglass articles in the dryer. Glass particles left in the washer could be picked up by clothes in the next load and irritate skin.
27
OPERATION
Extra Rinse
You can add an extra rinse cycle to the default rinse cycle.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Press the Extra Rinse button.
- The Extra Rinse indicator light will turn on.
3
You can now modify other cycle settings and add options (see pages 25-28), or proceed to step 4 to begin the cycle.
4
Press the Start/Pause button.
Pre Wash
Pre-wash for 16 minutes when clothes are covered in dirt or dust. This feature is suitable for heavily soiled items.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Press the Pre Wash button.
- The indicator light will turn on.
3
You can now modify other cycle settings and add options (see pages 25-28), or proceed to step 4 to begin the cycle.
4
Press the Start/Pause button.
Delay Wash
Set the desired start time for the cycle.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Modify the cycle settings and add other options (see pages 25-28), if desired.
3
Press the Delay Wash button repeatedly to select the desired start time.
- The Delay Wash indicator light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time by one hour, up to 19 hours.
4
Press the Start/Pause button.
Water Plus
Use this option to add extra water to the wash and rinse cycles for better wash performance with large or bulky items.
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Press the Water Plus button..
- The indicator light will turn on.
3
You can now modify other cycle settings and add options (see pages 25-28), or proceed to step 4 to begin the cycle.
4
Press the Start/Pause button.
Rinse+Spin
Use this cycle to rinse detergent from the load. 1 Press the Power button and turn the cycle
selector knob in either direction to select the desired cycle.
2 Press the Rinse+Spin button.
3 Press the Spin Speed button repeatedly to set
the spin speed.
- The indicator light for the selected spin speed will turn on.
4
Press the Start/Pause button.
28
OPERATION
Setting Options During Cycle
You can add the desired options during the wash cycle.
Child Lock
You can lock the washing machine to prevent children or others from changing the cycle settings by pressing the buttons during the cycle.
Enabling Child Lock
Press and hold the Pre Wash button for 3 seconds during the wash cycle.
- When the Child Lock is enabled, a message and the remaining wash time are displayed, in turn, on the display panel of the washing machine.
Disabling Child Lock
(When the Child Lock is activated.) Press and hold the Pre Wash button for 3 seconds during the wash cycle.
NOTE
ü
Child Lock lasts after the end of the cycle. If you want to deactivate this function, press and hold the Pre Wash button for 3 seconds.
PGM Save
Save a frequently used cycle with all the desired settings and options.
Saving a Cycle
1
Press the Power button and turn the cycle selector knob in either direction to select the desired cycle.
2
Modify other cycle settings and add options (see pages 25-28).
3
Press and hold the Custom PGM button for 3 seconds during the wash cycle.
- The cycle with your preferred settings and options is saved.
Custom PGM
Recall the previously saved wash cycle and settings.
Recalling a Cycle
1
Press the Power button, then press the Custom PGM button.
2
Press the Start/Pause button.
Adding Garments
Garments can be added or removed after the cycle is started.
1
Press the Start/Pause button.
2
The door lock is released to open the door.
3
Add or remove laundry.
4
To continue the cycle, press the Start/Pause button again. The cycle continues automatically.
NOTE
For safety reasons, the door remains locked
ü
when the water level or temperature is high. It is not possible to add laundry during this time.
29
MAINTENANCE
Regular Cleaning
Care After sh
After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture. Leave the door open to dry the washer tub interior. Wipe the body of the washing machine with a dry cloth to remove any moisture.
WARNING
Unplug the washer before cleaning to avoid
ü
the risk of electric shock.
Failure to follow this warning can cause serious injury, fire, electric shock or death.
Never use harsh chemicals, abrasive cleaners,
ü
or solvents to clean the washer.
They will
damage the finish.
Do not use volatile substances (benzene, paint
ü
thinner, alcohol, acetone, etc.) or detergents with strong chemical components when cleaning the washing machine.
Doing so may cause discoloration or damage to the machine, or it may cause a fire.
Care in Cold Climates
Long-Term Storage
Follow these instructions when storing the washer for an extended period where it might be exposed to freezing temperatures.
1
Turn off the faucets connected with the water lines.
2
Unscrew the water lines from the back of the washer.
3
Empty any water out of the water lines.
4
Press the Power button.
5
Open the door and add 1 gallon (3.8 L) of nontoxic recreational vehicle (RV) antifreeze to the empty washer tub. DO NOT use automotive anti-freeze. Close the door.
6
Press the Spin Speed button for draining and spinning.
MAINTENANCE
7
Press the Start/Pause button.
- Drain the water from the washing machine for 1 minute. Not all of the RV antifreeze will be expelled.
8
Press the Power button to turn off the washing machine and pull out the power plug.
9
Dry the interior of the washer tub with a soft cloth, and close the door.
10
Press down hard on the disengage button and pull out the detergent dispenser drawer.
11
Drain the water from the detergent dispenser drawer and dry out each compartment.
12
Store the washing machine in an upright position.
NOTE
To remove the antifreeze after storing the
ü
washing machine, add detergent to the dispenser, and run one cycle. Do not load any laundry at this time.
Thawing Frozen Water Lines
1
Turn off the faucets connected with the water lines.
2
Pour hot water on the frozen faucets to thaw the water lines and pull them out.
3
Immerse the water lines in hot water to thaw them.
4
Connect the water lines with the water inlets of the washing machine and faucets.
- See page 14, Connecting the water lines for details.
5
Turn on the faucets.
6
Press the Power button.
7
Press the Rinse+Spin button.
8
Press the Start/Pause button.
- Verify the water fills properly.
30
MAINTENANCE
Thawing a Frozen Drain Line
1
Pour hot water in the washer tub and close the door.
- Leave it for 10 minutes.
2
Press the Power button after 10 minutes.
3
Press the Spin Speed button for draining and spinning.
4
Press the Start/Pause button.
- Check if the water drains.
Cleaning
Periodically clean the washing machine to help maintain its performance and to minimize the chance of malfunction.
Tub Clean
Improper installation or use of the washing machine in a humid space for a long period of time could lead to a buildup of detergent residue in the washing machine that may produce mildew or musty smells. If you clean the washer tub regularly on a monthly basis using Tub Clean it will minimize the possibility that detergent residue will build up and mildew or musty smells may occur.
1
Add tub cleaner or lime scale remover into the detergent dispenser drawer.
- Do not exceed the maximum detergent limit line when you add it. Detergent may remain in the washer tub after cleaning.
-
When you use liquid chlorine bleach,
load it
into the liquid chlorine bleach compartment.
-
When you use a powdered cleaner,
pull out the liquid detergent cup and add it into the main wash detergent compartment.
-
When you use cleaning tablets,
place them directly into the washer tub. (Do not add tablet cleaner to the drawer.)
2
Press the Power button.
3
Turn the cycle selector knob to select Tub Clean.
-
message appears in the display.
- The indicator light for Tub Clean turns on.
4
Press the Start/Pause button.
NOTE
Never load laundry while using Tub Clean. The
ü
laundry may be damaged. Make sure to clean the washer tub when it is empty. Leave the door open after finishing the laundry
ü
to help keep the tub clean. Repeat the Tub Clean cycle monthly.
ü
If you notice mildew or musty smells, run Tub
ü
Clean once a week for three consecutive weeks. Safely and conveniently secure the door
ü
slightly ajar with the magnetic door plunger. This will promote air circulation and help the machine to dry.
Loading...
+ 102 hidden pages