LG WD-K1212RD6 Manual book
OWNER’S MANUAL
WASHING MACHINE
WD-K1212RD6
P/No.: MFL51768166
www.lg.com
Please read this manual carefully before operating
your washing machine and retain it for future reference.
ENGLISH BAHASA
2
ontents
C
Contents....................................2
Product feature.........................3
Warnings
Important safety instructions .................4
Save these instructions.........................4
Specification.............................6
Installation
Transit bolts ..........................................7
Removing transit bolts ..........................7
Installation place requirement ...............8
Positioning ............................................8
Electrical connection .............................9
Connecting water supply hose............10
Installation of drain hose .....................12
Level adjustment.................................13
Care before washing
Before the first washing ......................14
Caring before washing ........................14
How to use the detergent
Detergent usage reference table ........15
Precaution when using the detergent .15
How to use the fabric softener
Guide on adding fabric softener..........16
How to open/close the door
How to open the door .........................17
How to close the door ........................17
How to use washer
Washing program table.......................18
Control Panel ......................................19
Additional program..............................26
- Time Delay......................................26
- Tub Clean .......................................26
- Child Lock .......................................27
- Shoes Refresh function ..................28
- Shoes Dry function .........................29
- Shoes Wash ...................................30
- Display ............................................31
Thank you for buying a LG Fully
Automatic Washing Machine.
Please read your owner’s manual
carefully, it provides instruction on safe
installation, use and maintenance.
Retain it for future reference.
Record the model and serial number of
your washing machine.
Model No.
Serial No.
Date of Purchase
Maintenance
The water inlet filter.............................32
The drain pump filter ...........................33
Cleaning method.................................34
- The water circulation Nozzle &
Steam Nozzle .................................35
- Cleaning your washer .....................35
- Winterizing instructions...................35
Trouble shooting guide
Diagnosing problems ..........................36
Error messages...................................39
Terms of warranty ..................40
3
ENGLISH
roduct Feature
P
Direct Drive System
The advanced Brushless DC motor directly drives the drum without
belt and pulley.
Water Circulation
Sprays detergent solution and water onto the load over and over.
Clothes are soaked more quickly and thoroughly during wash cycle.
The detergent suds can be removed more easily by the water shower during rinse
cycle. The water circulation system uses both water and detergent more efficiently.
Tilted Drum and Extra Large Door Opening
Tilted drum and extra large opening make it possible to load
and unload clothing more easily.
Steam Washing and Refresh
Steam Washing features upgraded washing performance with low energy and
water consumption. Refresh cycle removes wrinkles from dry clothes.
Free Up Design with user friendly
It’s very useful to put in and out the clothes with higher door position and can
stored accessory neatly.
Embossing drum & waved lifter
Embossing drum enhances the washing performance and reduces clothes
damage.The waved lifter spray and help clothes to enhance washing performance
during the washing cycle.
Automatic Wash Load Detection
Automatically detects the load and optimizes the washing time.
Built-in Heater
Internal heater helps to maintain water temperature at its optimum level for
selected cycles.
Child Lock
The Child lock prevents children from pressing any button to change the settings
during operation.
추가선택 예약
4
arnings
W
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
!
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
❊ Do not push down the door excessively, when washer door open.
This could topple over the washer.
• Before installation, check exterior damages. If it has,
do not install.
• Do not install or store the washer where it will
be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance instructions
or published user-repair instructions that you
understand and have the skills to carry out.
• Keep the area underneath and around your
appliances free of combustible materials such as
lint, paper, rags, chemicals, etc.
• Close supervision is necessary if this appliance is
used by or near children. Do not allow children to
play on, with, or inside this or any other appliance.
• Keep small animals away from the appliance.
• Do not leave the washer door open.
An open door could entice children to hang on the
door or crawl inside the washer.
• Never reach into washer while it is moving. Wait
until the drum has completely stopped.
• The laundry process can reduce the flame retardant
of fabrics.
• To avoid such a result, carefully follow the garment
manufacturer’s wash and care instructions.
• Do not wash or dry articles that have been cleaned
in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode. Oil may remain in the tub after a whole
cycle resulting in fire during drying. So, do not load
oiled clothes.
• Do not slam the washer door closed or try to force
the door open when locked. This could result in
damage to the washer.
• When the machine runs high temperature, the front
door may be very hot. Don’t touch it.
• To minimize the possibility of electric shock, unplug
this appliance from the power supply or disconnect
the washer at the household distribution panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.
• When unplugging power cord, do not pull out by
grasping the cord. Otherwise, the power cord may
be damaged.
• Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.
• Before discarding an old machine unplug it. Render
the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
• When a product was under water, Please call
service center. The risk of electric shock and fire.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path
of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter or otherwise defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using
the washer, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
WARNING :
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
5
ENGLISH
arnings
W
To minimize the risk of fire in a tumble dryer, the following should be observed:
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire
hazard and should not be placed in a tumble dryer.
Oil-affected items can ignite spontaneously, especially when exposed to heat
sources Such as in a tumble dryer. The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enough to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
• Items that have been previously cleaned in, washed in, soaked in or spotted with
petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
• Items containing foam rubber (also known as latex foam) or similarly testured rubber.
like materials should not be dried in a tumble dryer on a heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous combustion.
• Fabric softeners or similar products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
• Undergarments that contain metal reinforcements should not be placed in a tumble
dryer.
Damage to the tumble dryer can result if metal reinforcements come loose during
drying. When available a drying rack could be used for such items.
• Plastic articles such as shower caps or babies waterproof napkin covers should not
be placed in a tumble dryer.
• Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and
rubber-coated tennis shoes should not be placed in a tumble dryer.
6
pecification
S
Name : Front loading washing machine
Power supply : 220 V~, 50 Hz
Size : 635 mm(W) x 743 mm(D) x 1122 mm(H)
Weight : 110 kg
Wash capacity (Max. Watt) : 13 kg (2200 W)
Dry capacity (Max. Watt) : 8 kg (2200 W)
Spin speed : No Spin / Extra Low / Low / Medium / High / Extra High
Water consumption : 138
l
Permissible water pressure : 0.3-10 kgf/cm2(30-1000 kPa)
❋ The appearance and specifications may be varied without notice to improve the units quality.
❋ Specifications subject to change by manufacturer.
Accessories
Drum
Drain Pump Filter
Drain Plug
Pedestal
Door
Adjustable Feet
Drain Hose
Control Panel
Lower cover cap
Shipping Bolts
Power Plug
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
Inlet Hose
Dispenser
Inlet hose (1EA) Spanner
7
ENGLISH
nstallation
I
1. To prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
• If they are not removed, it may cause
heavy vibration, noise and malfunction.
3. Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the spanner
for future use.
• Whenever the appliance is transported,
the transit bolts must be refitted.
The appliance is fitted with transit bolts to prevent internal damage during transport.
• Packing and all transit bolts must be
removed before using the washer.
When unpacking the base, be sure to
remove the additional packing support
in the middle of the base packing.
2. Unscrew the 4 bolts with
the spanner supplied.
4. Close the holes with the caps supplied.
Transit bolts
Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on
a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean
condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the
appliance guarantee.
Removing transit bolts
Washer
Base Packing
Packing Support
8
nstallation
I
Level floor :
Allowable slope under entire washer is 1°
Power outlet :
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear / 2cm : right & left side)
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
Installation place requirement
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
• Before placing the washer on tiles, apply a rubber mat under the feet.
• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar
materials under the washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating covered with aluminum foil on the side facing the cooker or stove,must be inserted
between the two appliance.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for the engineer in the
event of a breakdown.
• With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the
appliance is stable, and a clearance of approximately 20mm is left between the top of the washer
and the underside of the work-top.
• The installation instructions shall state that the openings must not be obstructed by a carpet if it
has ventilation openings in the base.
Washer
Drain Hose
Laundry
Tub
approx.
2cm
9
ENGLISH
nstallation
I
1. Do not use an extension cord or double adapter.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or
similarly qualified person in order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
• Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
• If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Electrical connection
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
If this appliance is supplied from a cord extension set or electrical portable outlet device, the cord
extension set or electrical portable outlet device must be positioned so that it is not subject to
splashing or ingress of moisture.
CAUTION
This appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
CAUTION
nstallation
I
10
1. Unscrew the adapter ring plate and the 4
adapter retaining screws.
2. Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the adapter ring plate
and the 4 screws.
3. Push the water supply hose vertically
upwards so that the rubber packing within
the hose can adhere completely to the
tap and then tighten it by screwing it to
the right.
• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 ~ 10.0 kgf / cm
2
)
• Do not strip or crossthread when connecting inlet hose to the valve.
• If the water supply pressure is more than 1000 kPa, a decompression device should be
installed.
• Periodically check the condition of the hose and replace the hose if necessary.
Type-A : Connecting Screw-type hose to tap with thread
• Screw the hose connector onto water
supply tap.
■ Connecting water supply hose
Step1 : Check rubber seal inlet hose
Step2 : Connect hose to water tap
• Two rubber seals are supplied with the
water inlet hoses.
They are used for preventing water leaks.
Make sure the connection to taps is
sufficiently tight.
Upper
connector
Rubber
packing
Plate
Water supply
hose
Fixing screw
Hose
connector
Rubber
seal
Type-B : Connecting Screw-type hose to tap without thread
11
ENGLISH
nstallation
I
1. Unscrew the adapter ring plate and
the 4 adapter retaining screws.
2. Remove the guide plate if the tap is
too large to fit the adapter.
3. Push the adapter onto the end of
the tap so that the rubber seal forms
a watertight connection.
Tighten the adapter ring plate and
the 4 screws.
4. Pull the connector latch plate down,
push the inlet hose onto the adapter,
and release the connector latch plate.
Make sure the adapter locks into place.
After completing connection, if water leaks from the hose, repeat the same steps.
Use the most conventional type of faucet for water supply. In case the faucet is square
or too big, remove the spacing ring before inserting the faucet into the adaptor.
Use the horizontal tap
Horizontal tap Extension tap Square tap
Ring plate
Guide plate
Latch plate
Type-C : Connecting one touch type hose to tap without thread
Step3: Connect hose to washer
• Make sure that there are no kinks in the
hose and that they are not crushed.
When your washer has two valves.
• The Inlet hose which has red connector is
for the hot water tap.
• If the washer has two valves, the energy is
saved by using hot valve.
After connecting inlet hose to
water tap, turn on the water taps
to flush out foreign substances
(dirt, sand or sawdust) in the
water lines. Let water drain into a
bucket, and check the water
temperature.
12
nstallation
I
Installation of drain hose
• The drain hose should not be placed higher
than 100 cm above the floor. Water in the
washer does not drain or drains slowly.
• Proper securing of the drain hose will protect
the floor from damage due to water leakage.
• When the drain hose is too long, do not force
back into the washer. This will cause
abnormal noise, malfunction, and water
leakage.
• When installing the drain hose to a sink,
secure it tightly with a string.
• Proper securing of the drain hose will
protect the floor from damage due to water
leakage should the drain hose become
loose.
This equipment is not designed for maritime use or for use mobile installations such as
caravans, aircraft etc.
Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of
suffocation ! Keep all packaging well away from children
about 100 cm
about 100 cm
Laundry tub
Hose
Retainer
Tie
strap
max. 100cm
min. 60cm
max. 100cm
min. 60cm
about 105 cm
about 105 cm
max. 100 cm
max. 100 cm
min. 60 cm
min. 60 cm
about 145 cm
about 145 cm
13
ENGLISH
nstallation
I
Concrete floors
Wooden floors (Suspended floors)
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.
Tile floors (Slippery floors)
• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into
70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)
※※
Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
• Wooden floors are particularly susceptible to vibration.
• To prevent vibration we recommend you place rubber cups under each
foot, at least 15mm thick under the washer, secured to at least 2 floor
beams with screws.
• If possible install the washer in one of the corners of the room, where the floor is more stable.
※※
Insert the rubber cups to reduce vibration.
※※
Rubber cups ( p/no. 4620ER4002A) can be purchased from the LG spare parts department.
Important!
• Proper placement and levelling of the washer ensures long, regular and reliable operation.
• The washer must be absolutely horizontal and stand firmly in position.
• It must not “Seesaw” across corners under load.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
※
It can be purchased from
hardware suppliers.
Level adjustment
1. Adjusting the washing machine level properly prevents excessive
noise and vibration.
Install the appliance on a solid and level floor surface, preferably in
a corner of the room.
2. If the floor is uneven, adjust the adjustable feet as required. (do
not insert pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
※※
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
NOTE
Timber or suspended type flooring may contribute to
excessive vibration and unblance errors.
NOTE
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
Rubber Cup
Adjustable
feet
Adjustable
feet
14
are before washing
C
1. Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your garment and
how it should be washed.
2. Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can
occur causing discoloration of white etc. If possible, do not wash heavily soiled items with lightly
soiled one.
Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
Color (White, Lights, Darks) Separate white fabrics from colored fabrics.
Lint (Lint producers, Collectors) Wash lint producers and lint collectors
separately.
3. Caring before loading
Caring before washing
Before the first washing
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing.
This will remove residues from the drum that may have been left during manufacturing.
• Check all pockets to make sure that they are
empty. Items such as nails, hair clip,
matches, pens, coins and keys can damage
both your washer and your clothes.
• Pre treat dirt and stains by brushing a little
detergent dissolved in water onto stains like
collars and cuffs to help shift dirt.
• Close zippers, hooks and strings to make
sure that these items don’t snag on other
clothes.
• Check the folds of the flexible gasket (gray)
and remove any small articles,if any.
• Check inside of the drum and remove any left
items in it for next wash cycle.
• Remove any clothing or items on the flexible
gasket to prevent clothing and the gasket
damages.
15
ENGLISH
ow to use the detergent
H
Detergent usage reference table (For 1 standard wash cycle)
Detergent type
Laundry
Amount
8.0kg or above
About 6.0 – 8.0kg
About 2.0 – 6.0kg
2.0kg or less
35g
20g
* (High concentration detergent measuring cup: 35g)
About 35g
About 30g
About 20g
About 10g
About 70g
About 50g
About 35g
About 20g
About 70g
About 50g
About 35g
About 20g
High concentration
detergent
Detergent exclusively
for drum washer
Liquid
detergent
Precaution when using the detergent
• Refer to the detergent usage reference table and add the proper amount of detergent accordingly.
1) Because the drum washer uses the washing method of utilizing the height difference, it can wash the
laundry with about 1/3 of the amount of water. Therefore when adding the detergent, you must reduce the
amount to 1/3 of the general washer.
2) When washing relatively clean laundry, reduce the amount of detergent. The more you use the detergent,
the more the amount of generated bubbles. Therefore you can still have bubbles even after the rinse
cycle.
3) If the quality of the water is good (Sweet water), the washing capability and the amount of bubbles
generated increase. Therefore you can reduce the amount of detergent.
• Stains on inner wear (Cotton) or baby clothes (Cotton) are generally from sebum or protein substance.
Therefore rather than increasing the amount of the detergent, it is more effective to wash at higher
temperature and to increase the number of rinse cycles.
• If you use the detergent excessively, the following problems can occur.
1) Excessive bubbles can increase the rinse time and the normal rinse cycle may not be possible.
2) Bubbles may not be completely removed after the final rinse cycle.
• Natural power soap does not dissolve well in water can easily block the drain to cause leakage or other
problems. Therefore you must dissolve natural powder soap in warm water before applying to the washer.
• If you have selected the Pre-wash, use less than half of the detergent amount of the main wash cycle. And
because the water supply cycle time is short, add the detergent prior to starting the washing cycle.
• When the detergent container is set, the addition of the detergent may not be smooth. Therefore wipe any
moisture in the detergent container to make it more effective.
• The reason the water looks white while draining is due to the fine bubbles generated from high speed
rotation of pump propeller while lint, zeolite and fabric softener are drained. Therefore, just because the
water looks white does not mean the rinse is incomplete.
• When using the liquid detergent, make sure to add below the MAX line of the liquid detergent box of the
detergent/fabric softener container.
• Do not leave liquid detergent in the detergent container for a long period of time. The liquid detergent will be
hardened and not be applied.
• When using the general detergent, it is recommended to use the detergent exclusively for the drum washer
as it may generate excessive bubbles.
• For the lump detergent, make sure to dissolve it before adding to the washer.
NOTE
16
ow to use the fabric softener
H
Add the detergent and fabric softener before the washing starts in the accurate locations.
Guide on adding fabric softener
• Fabric softener is automatically added in the final rinse cycle.
• Limit the amount of fabric softener to below MAX line.
(If you exceed the reference line, it may be added directly.)
• Do not keep the fabric softener in the detergent container for more than 2 days.
(Fabric softener will get hardened and may not automatically be added during the rinse cycle.)
• Do not use concentrated fabric softener.
(The fabric softener may not be added properly.)
• If there is water in the fabric softener inlet, pull out the container and wipe out the water before adding
the fabric softener.
• Because the fabric softener is added in the final rinse cycle, the water drained from the final rinse
cycle may look turbid.
Location to add
powder detergent
during main wash
Location to add
liquid detergent
during main
wash
Location to add
fabric softener
Location to add powder
detergent for Pre-wash
Below fabric softener MAX line
NOTE
ow to open/close the door
H
17
ENGLISH
If the washer is working or if the “Door lock” sign is displayed in the panel, you cannot open the
door. Do not try to force the door to open. If you want to open the door, press the “Start/Pause”
button and then after the “Door lock” sign disappears, press the “Door Open” button to open the
door.
❿
How to open the door
When you press the “Door Open” button, the
door will be opened.
❿
How to close the door
When you push the center part of the right side of
the door all the way to the end, the door will be
closed.
• If there is too much laundry or if the door is not closed completely, the “Door lock” sign may not be set.
• If you see the warning sign ( ) on the panel, close the door completely and then press the
“Start/Pause” button.
• The sound you hear after pressing the “Start/Pause” button to start the wash, is the sound of locking
the door and is a normal sound.
• The sound you hear after pressing the “Start/Pause” button during the wash course, is the sound of
unlocking the door and is a normal sound.
• In case of a power outage during the operation, the door will be opened after a certain period of time
(About 5 minutes). (Power outage during drying or boiling cycle can be dangerous and you must pay
special attention.)
NOTE
•
Push the laundry completely inside the washing drum (Inside the rubber packing).
•
Putting excessive amount of laundry can cause damage to the washer and the laundry.
•
Be careful not to get your hand caught between the washer door and the unit. It can
cause an injury.
CAUTION
18
ow to use washer
H
•
Recommended courses according to the laundry type.
Cotton
Color fast garments (shirts, night
dresses, pajamas...)and lightly soiled
white cotton (underwear...)
Pre Wash,
Intensive, Normal,
Light, Shoes Wash,
No Wash, Steam,
Time Delay, Dry
40˚C
(Cold, 30˚C,
60˚C)
Rating
Rating
Sports Wear
Normal, No Wash,
Steam, Time Delay
–
Dark Wash
This cycle is suitable for lightly solied
clothing. Use this cycle to save energy,
by using cold water while ensuring proper
washing.
Normal, No Wash,
Time Delay, Dry
30˚C
(Cold, 40˚C)
Cold Wash
Pre Wash,
Intensive, Normal,
Light, No Wash,
Time Delay, Dry
Cold
Wool
Normal, No Wash,
Time Delay
Normal, Light,
No Wash,
Time Delay
Time Delay, Dry
Normal, No Wash,
Steam,
Time Delay, Dry
40˚C
(Cold, 30˚C)
Duvet
Rinse + Spin
Speed Wash
Normal, No Wash,
Steam,
Time Delay, Dry
Pre Wash,
Intensive, Normal,
No Wash, Steam,
Time Delay, Dry
Sanitary
Heavy Duty
Cold
(30˚C, 40˚C)
95˚C
60˚C
(40˚C)
This cycle is suitable for sports wear
such as jogging clothes and running
wear.
Use this cycle to wash “multi-color”
clothes to maintain their color
Enable to wash wool fabrics. (Please use
detergent for machinewashable woolens).
This cycle is for large items such as bed
cover, pillows, sofa covers, etc.
Rinse and Spin
Lightly solied clothing and small loads
Heavily soiled underwear, work clothes,
diapers, etc
Heavily solied cotton fabrics
Maximum
Load
Additional
Option
Proper Temp.
(Option)
Fabric Type
Program
❋ Notes : Neutral detergent is recommended. The wool cycle features gentle tumbling and low-speed spin for
garment care.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine
washable Woolmark products provided that the products are washed according to the instructions
on the garment label and those issued by the manufacturer of this washing machine M0806.
Washing program table
Refresh
Allergy Care
Cotton mixed, Polyeter mixed Dress
shirts, blouses (It just makes wrinkled
clothes easy to iron)
For clean wash through eliminate
allergy source.
Steam, Time Delay
Normal, No Wash,
Steam,
Time Delay, Dry
–
5 items
Less than
5.0kg
Less than
5.0kg
Less than
3.0kg
Less than
3.0kg
Less than
5.0kg
Less than
5.0kg
Less than
4.0kg
1 king size
(9 Tog)
–
19
ENGLISH
ow to use washer
H
• Press the Power( ) button to start.
• Press the Start/Pause( ) button.
• Initial condition
- Rinse : 3
- Water temperature : 40°C
- Spin : High
- Program : Cotton
• Press the Power( ) button to turn the
washer on.
• Select the desired cycle with the program
dial and if required, make any changes to
the washing conditions by pressing the
buttons accordingly.
For selecting the each conditions, please refer
to the Page20~page31
• Press the Start/Pause button to
commence the cycle.
1. Cotton automatically
selected upon power on.
2. Manual Selecting
■ Control panel
20
ow to use washer
H
ProgramPower
• Press the Power( ) button to turn power
on and off.
• To cancel the Time Delay function, the
Power( ) button must be pressed.
• When the Power( ) button is pressed, the
washer is ready for Cotton program. And the
other initial conditions as follows.
• So, if you want to advance into the washing
cycle without changing the program, just
press Start/Pause( ) button and then the
washer will proceed.
■
Initial program
- Cotton Program / Rinse:3/ 40°C / High
(1)Button: Power
(2)Dial: Program
(3)Button: Start/Pause
(4)Button: Wash
(5)Child lock
(6)Button: Rinse
(7)Button: Spin
(8)Button: Tub Clean
(9)Button: Temperature
(10)Button: Door Open
(11)Button: Dry
(12)Button: Time Delay
(13)Button: Steam
(14)Button: Shoes
Refresh
(15)Button: Shoes Dry
• 12 programs are available according to the
laundry type.
• Dial lamp will light up to indicate selected
program.
• When Start/Pause( ) button is pressed,
the Cotton program is automatically
selected.
- By turning the Program dial, the program is
Selected in order of “Cotton – Sports Wear
– Dark Wash – Cold Wash – Wool – Duvet
– Rinse+Spin – Refresh – Allergy Care –
Speed Wash – Sanitary – Heavy Duty ”.
For information regarding laundry type for
each program, please refer to page 18.
1. Power
2. Initial Program
(10) (11)
(12) (13) (14) (15)
21
ENGLISH
ow to use washer
H
Wash
• By pressing the option
button, only one option
function may be selected.
NOTE: Depending on the
selected program cycle, not
all Options may be selectable.
Start/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press “Start/Pause” button.
• When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected, or at
the end of the wash cycle.
1. Start
• Use this option for loads that need
pretreatment. This adds 16 minutes of pre
washing before draining.
- When using Pre Wash option, do not use a
liquid detergent for the main wash.
Use powder for the main wash.
1. Pre Wash
• If the laundry is heavily soiled “Intensive”
option is effective.
• By selecting the Intensive option, the wash
time may be extended, depending on the
program seleted.
• To use this option select the Intensive option
once before the wash programe is started.
2. Intensive
• Use this option if you want to use only rinse
or spin function.
6. No Wash
• This option is automatically selected in
every course except for Rinse+Spin.
3. Normal
• This cycle is suitable for lightly solied clothing.
4. Light
• Use this option when you want to wash
slippers or shoes.
※※
Depending on the usage condition, steam
could not be operated.
5. Shoes Wash
2. Pause
22
Spin
• Spin speed is available according to the
Program as follows.
- Cotton & Dark Wash & Cold Wash &
Allegy Care & Speed Wash & Sanitary &
Heavy Duty
Extra High – High – Medium – Low – Extra
Low – No Spin
- Rinse+Spin
Extra High – High – Medium – Low – Extra
Low
- Sports Wear
Extra Low – No Spin
- Wool
Low – Extra Low – No Spin
- Duvet
Medium – Low – Extra Low – No Spin
• By pressing the Spin button, the spin speed
can be chosen.
• If “No Spin” is selected, the washer stops
after draining the water from the last spin.
The matching indicator lamp will light up for
identification.
1. Spin selection
2. No spin
ow to use washer
H
Rinse
• By pressing the Rinse button, the Rinse
type can be selected.
• Duvet performs 4 Rinses.
• Sports Wear, Dark Wash, Cold Wash,
Wool, Sanitary, Heavy Duty performs 3
Rinses.
• Cotton, Speed Wash performs 2 Rinses.
• Rinse+Spin performs 1 Rinses.
The matching indicator lamp will light up for
identification.
23
ENGLISH
ow to use washer
H
Water Temperature
• By pressing the Temp. button, the water
temperature can be selected.
• Water temperature can be selected as
below according to the program.
- Cotton
40°C – Cold – 30°C – 60°C
- Dark Wash
30°C – Cold – 40°C
- Cold Wash
Cold
- Wool
40°C – Cold – 30°C
- Duvet
Cold – 30°C – 40°C
- Sanitary
95°C
- Heavy Duty
60°C – 40°C
The required temperature lamp will light up for
identification.
For the more detailed information, please refer
to the page18.
Steam
• For tough stained clothes, underwear, or
baby clothes.
• Steam Wash is available with
Cotton, Refresh, Allegy Care, Sports
Wear, Speed Wash, Sanitary, Heavy
Duty.
• This option features upgraded washing
performance with low energy and water
consumption.
• Do not load delicates such as wool, silk,
and easily discolored clothes.
NOTE:
- The concentrated steam wash function is
highly efficient. There should be no visible
water level during the Steam Wash function.
- Steam spray may not be seen clearly
through the door; however, the washer is
spraying steam strongly inside.
- During the steam operation, a spraying
sound will be heard. This is not a
malfunction.
CAUTION
Do not reach into the washer while
operating. Steam can cause severe burns.
!
24
ow to use washer
H
• Do not overload above the maximum drying
capacity indicator. Items must be able to
tumble freely.
• This washer-dryer’s automatic process from
washing to drying can be selected easily.
• For most even drying , make sure all articles
in the clothes load are similar in material
and thickness.
• By turning the dial, you can select.
Normal ➔ More ➔ 60 ➔ 90 ➔ 120 ➔
150 ➔ Low Temp ➔ Iron.
• Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature
of the exhaust to increase or decrease drying
temperatures for faster reaction time and
tighter temperature control.
• Recommend Automatic drying course for
clothes type.
a) Low Temp – Will use low temperature to dry
clothes that are heat sensitive.
b) Iron – Will leave clothes slightly damp, ideal
for ironing
c) Normal – Will dry clothes enough to be
removed and folded, ideal for everyday
clothes such as cottons.
d) More – Will ensure maximum drying
performance.
NOTE:
The estimated drying time varies from the
actual drying time when in the Automatic mode.
The type of fabric, size of the load, and the
dryness selected, do affect the drying times.
❋ The standard laundry weight which shows
how much laundry to put into the washer.
Dry
NOTE
The maximum drying capacity for this
model is 8 kg. When loading, please
use the maximum drying capacity
indicator behind the door as shown
below.
Sorts of
laundry
Sorts of
laundry
Single
weight
Single
weight
Diaper
200g 300g95g
Short-
sleeved
Shirt
Underwear
500g 600g50g
Jean
Nightclothes
1. Drying Automatic guide
25
ENGLISH
ow to use washer
H
• By turning the Dry button, the drying time
can be selected.
• Drying course can last up to 150min. When
selecting drying only, drying course will
start after spining, unless the spin omitted.
• These drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
- Do not tumble dry woolen articles. Pull them
to their original shape and dry them flat.
- Some woven and loop knit materials may
shrinks, by varying amounts, depending on
their quality.
- Always stretch not these type of garments
immediately after drying.
Woolen Articles
- Do not overload your dryer
- Take out permanent press articles as soon
as the dryer stops to reduce wrinkles.
Permanent Press and Synthetics
- Always check the manufacture’s
instructions.
Fiber or Leather Materials
- Always check the manufacture’s
instructions.
Baby clothes and Night Gowns
- Do not dry any items made from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Rubber and Plastics
- Do not dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irri tate your skin.
Fiber glass
• When drying cycle is completed, “ ” is
displayed on the display.
2. Manual Drying time guide
3. Completion of Drying
26
ow to use washer
H
Time Delay
Preparing washing before starting “Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set “Time Delay”
- Press Power( ) button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause( ) button.
• If Time Delay button is pressed, “3:00” is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances time
delay by one hour.
• To cancel the time delay, press the
Power( ) button.
• Time Delay is ‘expected time’ from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
Tub Clean
1. Press the Power button.
• Close the door.
• Add the detergent or antibacterial
detergent to the container.
• Add the liquid chloride bleach to the liquid
detergent container or powder chloride
detergent to the detergent container for
main wash.
2. Press the spin and temp. button
simultaneously.
• “Tub Clean” Course will be set and all
button are inoperable.
3. Press the “Start” button.
• The door will be locked and the Tub
Clean will start.
Use this function to sanitize drum to remove
any bacteria and keep the drum clean.
• Do not add more than the designated
amount for the chloride bleach. If you add
too much chloride bleach, it may cause
problems to the washer.
Powder detergent or bleach
54g
Powder
bleach/detergent
Liquid
bleach/
detergent
• If you add more than the
reference line, it may be
directly added to the
laundry.
Liquid
detergent/
bleach
reference
line (MAX)
Liquid detergent or bleach
54ml
Loading...