LG WD-14276RD Owner's manual

MFL30138446

RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.

이 도면은 LG전자의 자산으로 불법 유출시 관계법과 회사규정에 의해 처벌됨.

210

WORK

나

SEC.

가 BRAND

가

나 MODEL

WD-14276RD

다 P/NO.

MFL30138446

PRINTING DEGREE EXTERIER INTERIER

SNOW WHITE 100g OFFSET 인쇄

MATERIAL AND PRINTING DESCRIPTION

<< 주기 >>

1. 재질 : 모조지 100g

2. 인쇄 작업

1) G/S(LG) BRAND(FIG1): * 표지 - 1도 : LG RED PANTONE #207

2) OEM BRAND(FIG2) : * 표지 - 1도 : BLACK * 내지 - 1도 : BLACK

3. 문자의 크기 및 형상은 주어진 FILM에 준한다.

4. 책자의 크기는 일반적 규격(국판)에 준한다.

5. 양산 전에 설계 한도를 득할것.

6. 유해물질 관리 기준 :본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를 만족할 것.

LG MODEL 명

SUFFIX

WD-11276RD ATTEGSP

- 2도 : LG GRAY PANTONE #430

* 내지 -1도 : BLACK

LANGUAGE

ENG/SPA-A

PAGE

REMARK

MAYFLOWER-PJT

REV. NO.

기호

REVISION DESCRIPTION

변경 사항

P/NO. 다

150 150

APPROVED

REF. NO.

시방 번호

년/월/일

DATE

PREPARED

시방자

승인자

<< NOTES >>

1. Material : Vellum paper

2. Print work

1) G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207

- Second color : LG GRAY PANTONE #430 * Inside - First color : Black

2) OEM BRAND(FIG2) : * Cover - First color : Black * Inside - First color : Black

3. Printing, text size and line are based on LG designg film.

4. Size will Follow the standard.

5. Before product controlled by criteria sample.

6. Standard of supervision for hazardous material : The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE) and details should comply with LG standard of LG(63)-A-5501-34.

TRIG.

MODELING

LG 전자 (주) LG Electronics Inc.

UNIT SCALE

REVIEWEDDESIGNED

김 동 우

07.02.13 07.02.13 07.02.16

김 효 량 황 성 기

CHECKED APPROVED

RELATED DWG.

MANUAL,OWNER’S

T L E

DRUM-EXPORT 1/1

DWG. No.

MFL30138446

PDF

ILLUSTRATOR

DR COMPLETED

도면 DR 완료

완료일 : 07.02.16

P/No.: MFL30138446

WD-14276RD

Washing Machine

OWNER’S MANUAL

WD-14276RD

Thank you for buying a LG Fully Automatic Washing machine. Please read your owner’s manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing machine.

roduct Feature

ontents

Warnings...............................................................................................3

Specification..........................................................................................4

Installation.............................................................................................5

Care before washing...........................................................................10

Using the dispenser ............................................................................11

Function ..............................................................................................13

How to use washer .............................................................................14

Maintenance .......................................................................................18

Troubleshooting guide ........................................................................21

Terms of Warranty ..............................................................................24

■

Direct Drive System

The advanced Brushless DC motor directly drives the drum without belt and pulley.

■

Tilted Drum and Extra Large Door Opening

Tilted drum and extra large opening make it possible to load

and unload clothing more easily.

■

Water Circulation

Spray detergent solution and water onto the load over and over. Clothes are soaked more quickly and thoroughly during wash cycle. The detergent suds can be removed more easily by the water shower during rinse cycle. The water circulation system uses both water and detergent more efficiently.

■

RollerJets

Washing ball enhances the wash performance and reduces damage to the clothing. The jets spray and help tumble clothes to enhance washing performance while maintaining fabric care.

■

Automatic Wash Load Detection

Automatically detects the load and optimizes the washing time.

■

Built-in Heater

Internal heater helps to maintain water temperature at its optimum level for selected cycles.

■

Child Lock

The Child lock prevents children from pressing any button to change the settings during operation.

추가선택, 예약,

arnings

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

WARNING!

• Read all instructions before using the washer.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.

• Before the washer is removed from service or discarded, remove the door to prevent children from hiding inside.

• Do not install or store the washer where it will be exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer

or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your washer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

• Do not use an adapter or extension cord.

• Do not remove ground prong.

• If you don’t have the proper outlet, consult an electrician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING : To reduce the risk of fire, electric shock, or injury to persons when using

the washer, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

WARNING :

Improper connection of the equipment-grounding conductor can result in risk of electric

shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.



Accessories

pecification

 Name : Front loading washing machine  Power supply : 120 V~, 60 Hz  Size : 686 mm(W)

×767 mm(D)×982 mm(H) /

1291 mm (D, door open)

 Weigh : 91 kg (201 lbs)  Wash capacity : 14 kg (30.86 lbs)  Dry capacity : 8 kg (17.64 lbs)  Spin speed : 1100 rpm max.  Permissible water pressure : 0.3-10kgf/cm

(30-1000kPa)

❋ The appearance and specifications may be varied without notice to raise the units quality.

nstallation

1. To prevent internal damage during transport, the special 4 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs.

• If they are not removed, it may cause severe

vibration, noise and malfunction.

3. Take out the 4 bolts along with the rubber bungs by slightly twisting the bung. Keep the 4 bolts and the spanner for future use.

• Whenever the appliance is transported, the

transit bolts must be refitted.

The appliance is fitted with transit bolts to prevent internal damage during transport.

2. Unscrew the 4 bolts with the spanner supplied.

4. Close the holes with the caps supplied.



Removing transit bolts

cap

Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances.

To reduce the risk of electric shock, do not install the washer in humid spaces. The base opening must not be obstructed by carpeting when the washing machine is installed on a

carpeted floor. In countries where there are areas which may be subject to infestation by cockroaches or other

vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times.

Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance guarantee.



Transit bolts

nstallation

■Installation clearances

The location must be large enough to fully open the washer door.

■ Washer dimensions

• Most installations require a minimum 10 cm clearance behind the washer.

■ Minimum installation spacing for recessed area installation.

The following dimensions shown are for the minimum spacing allowed. Additional spacing should be considered for installation and servicing.

• Additional clearances might be required

for wall, door and floor moldings.

• Additional spacing of 2.5 cm on all

sides of the washer is recommended to reduce noise transfer.

Companion appliance spacing should also be considered.

■ Level floor

• Allowable slope under entire washer is 1°.

• To minimize noise and vibration, the washer MUST be installed on a solidly constructed floor.

• Wood floors may need to be reinforced to reduce noise and vibration.

• Carpeting and soft tile surfaces are not recommended.

• Never install the washer on a platform or weakly supported structure.

■ Power outlet

Must be within 1.5 m of either side of the washer. Do not overload the outlet with more than one appliance.

[Vista frontal]

[Vista lateral]

68.6 cm

76.7 cm

98.2 cm

129.1 cm

68.6 cm

2.5 cm

76.7 cm

nstallation

Rubber seal

Hose connector

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

CAUTION

▶Water supply pressure must be between 30kPa and 1000kPa

(0.3~10kgf/cm

)

▶Don’t strip or crossthread when connecting Inlet hose to the valve. ▶If the water supply pressure is more than 1000kPa, a decompression

device should be installed.

• Two rubber seals are supplied with the water inlet hoses these are in order to prevent water leaks.

• Check water tightness of washing machine connections by turning the tap completely on.

• Periodically check the condition of the hose and replace the hose if necessary.

• Make sure that there is no kink on the hose and that it is not crushed.

▶When your washer has two valves,

• The Inlet hose which has red connector is for the hot water tap.

• If the washer has two valves, the energy is saved by using

hot valve.



Washing Machine is to be connected to the water mains using new hose-sets and that old hose-sets should not be used.



Connecting water supply hose

1. Do not use an extension cord or double adapter.

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or

similarly qualified person in order to avoid a hazard.

3. Always unplug the machine and turn off the water supply after use.

4. Connect the machine to an earthed socket in accordance with current wiring regulations.

5. The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.

• Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room temperature for a few hours before putting it into operation.



Electrical connection

nstallation



Installation of drain hose

about

• The drain hose should not be placed

higher than 100 cm above the floor.

• Proper securing of the drain hose will

protect the floor from damage due to water leakage.

• When the drain hose is too long, do

not force back into the washer. This will cause abnormal noise.

• When installing the drain hose sink, secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children.

about

Laundry tub

max. 100cm min. 60cm

Hose

Retainer

Tie

strap

max. 100cm min. 60cm

nstallation



Level adjustment

1. Adjusting the washing machine level properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.

2. If the floor is uneven, adjust the adjustable feet as required. (Do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (Use a spirit level)

❊ After the washer is level, tighten the lock

nuts up towards of the base of the washer. All lock nuts must be tightened.

❊ Diagonal Check

When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all. (Please, check both of two directions) If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

are before washing

1. Fabric Care Labels

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed.

2. Sorting

To get the best results, sort clothes into loads that can be washed with the same wash cycle. Different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discoloration of white clothing. If possible, do not wash heavily soiled items with lightly soiled ones.

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil. Color (White, Lights, Darks) Separate white fabrics from colored fabrics. Lint (Lint Producers, Collectors) Wash lint producers and lint collectors separately.

3. Check before loading

Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

• Check all the pockets to make sure that they are empty. Things such as clip, matches, pens, coins, and keys can damage both your washer and your clothes.

• Close zippers, hooks, and strings to make sure that these items do not snag on other clothes.

• Pretreat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help lift dirt.

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

NOTE: Do not wash or spin water-proof clothes.

sing the dispenser

The automatic dispenser consists of four compartments which hold 1) liquid chlorine bleach,

2) liquid fabric softener, 3) liquid or powdered detergent for prewash and 4) liquid or powdered detergent and color safe bleach for main wash.

All laundry products can be added at once in their respective dispenser compartments. They will be dispensed at the appropriate time for most effective cleaning. After loading the laundry additives into the dispenser, close the dispenser drawer.

Add detergent, bleach and fabric softener to the automatic dispenser following these steps:

1. Open the dispenser drawer.

2. Load the laundry products into the appropriate compartments.

3. Close the dispenser drawer.

■ About detergent

Low sudsing detergent is recommended for this washer. Use the manufacturer's recommended amount. If low sudsing detergent is not available, a reduced amount of regular detergent may be used. Because reducing the amount of detergent may reduce cleaning, it is important to pretreat stains, sort carefully by color and soil level, and avoid overloading. Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid using too much detergent.

• Add detergent to this compartment when using the Prewash option. Liquid or powdered detergent may be used in this compartment. The detergent will automatically be dispensed during Prewash if the Prewash option is selected.

• Add 1/2 the recommended amount of detergent to the Prewash compartment and the recommended amount of detergent to the main wash compartment.

NOTE : Liquid detergent will drain

into the washer drum as it is added.

Liquid Chlorine Bleach Compartment

Liquid Fabric Softener Compartment

Prewash Compartment

Main Wash Compartment

1. Prewash Detergent Compartment

sing the dispenser

Liquid Detergent Box

Insert

• Add measured detergent to this compartment for Main wash. Detergent is flushed from the dispenser at the beginning of the cycle. Either powdered or liquid detergent can be used.

• Liquid or powdered color-safe bleach may be added to the main wash compartment along with the same type of liquid or powdered detergent.

• When using liquid detergent, make sure the liquid detergent box and insert are in place. Do not exceed the maximum fill line.

• For powered detergent, remove both the liquid detergent box and insert.

• Powdered detergent will not dispense with the liquid detergent box and insert in place.

2. Main Wash Detergent Compartment

• Add measured liquid chlorine bleach to this compartment. The bleach will be automatically dispensed at the proper time during the wash cycle.

• Do not exceed the maximum fill line. Overfilling can cause early dispensing of the bleach which could result in damaged clothes.

• Do not pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.

• Do not use powdered bleach in this compartment.

3. Liquid Bleach Compartment

• Add recommended amount of fabric softener to this compartment.

• Dilute concentrated softeners with warm water to the fill line.

• Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could result in stained clothes.

• Do not pour fabric softener directly on the wash load.

• The fabric softener will be automatically dispensed during the last rinse cycle.

4. Fabric Softener Compartment

unction

■ Select cycles designed for different types of fabric and soil levels.

1) Automatic wash load (weight) detection: Automatically detects the load and optimizes the washing time. After detecting, the estimated time remaining in the cycle will be displayed.

+ 34 hidden pages