LG V-CD281NT Owner’s Manual
Model
Language
Page
Material Size(W*H)
Date
Part No. Description
ＣＫ３
ＥＮＧＬＩＳＨ
１６ ＰＡＧＥ
Weight
１００Ｇ
２００６．０９．０４
Color(cover/body)
Designer
ＭＦＬ３２９３０８０１ ＭＡＮＵＡＬ，ＯＷＮＥＲＳ
Chage Record
No. Date
1
2
3
4
5
6
7
8
9
Change content
ECO No.
drawing realization ACTT702608 2007.04.14 SONG1 CUIYT
drawing realization ACTT703604 2007.06.01 SONG1 CUIYT
２／２
１９０＊２６０
Ｗａｎｇｚｈｅｎｚｈｏｎｇ
Designer
Confirm
V-CD281H*
V-CD281N*
V-CD261H*
V-CD261N*
V-CD241H*
V-CD241N*
Table of contents
2
Safety Information.....................................................................................................3
How to Use.................................................................................................................4
Assembling cleaner...............................................................................................................4
Using the cleaning head and Accessory Nozzles..................................................................6
Emptying the Dust Chamber .................................................................................................8
Operating the cleaner............................................................................................................9
Cleaning the Filter ................................................................................................................10
Cleaning the Exhaust Filter ....................................................................................................11
Troubleshooting...................................................................................................................12
Safety Information
3
Please read the following information, which contains important instructions for
the use and maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Do not use the appliance if the power cord is damaged or faulty.
If the power cord is damaged, it must be replaced by an approved LG Electronics Service Centre.
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
Do not unplug by pulling on cord.
Use only LG's recommended filters.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
The application is not intended for use by young children or infirm persons without supervision.
Thermal protector: This vacuum cleaner has a special thermostat that protects the cleaner in
case of motor overheating. If the cleaner suddenly shuts off, turn off the switch and unplug the
cleaner. Check the cleaner for a possible source of overheating such as a full dust chamber, a blocked
hose or clogged filter. If blockage or obstruction is located, remove and wait at least 30 minutes
before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and
turn on the switch. If the cleaner still does not run, please contact your approved LG service centre.
The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.
How to Use
Assembling Cleaner
Fit the large cleaning head into the end of the tube.
Spring latch
1
Elbow
NT**
NE**
Telescopic
tube
2
HT**
HE**
The 2 position head
(depending on model)
Push telescopic tube into
nozzle outlet.
4
Telescopic tube
(depending on model)
• Press the spring latch to release.
• Pull out the tube to the desired length.
• Release spring latch to lock the tube in
position.
• Push telescopic tube into hose handle firmly.
Button
3
Head
Flexible Hose
Attachment Point
HT**
HE**
NT**
NE**
Connecting the flexible hose
• Push the end of the head on the flexible hose
into the attachment point on the vacuum cleaner.
• To remove the flexible hose from the vacuum
cleaner, press on the button situated on the head,
then pull the head out of the vacuum cleaner.
CAUTION
• Suction power may be weakened when insignificant dusts
are sucked. In this case, clean the filter.
• Make the dust box empty if dusts are filled to the maximum
degree and then clean the filter when it becomes 5 times.
5
Loading...