LG V-CA251NTU User guide

Model

Language

Page

Material Size(W*H)

Date

Part No. Description

ＣＹＫＩＮＧ－ＭＩＮＩ

Ｅｎｇｌｉｓｈ，　Ｈｅｂｒｅｗ

２０　ＰＡＧＥ

Weight

１００Ｇ

２００６．０２．０６

３８２８Ｆｉ３８３３Ｖ

Color(cover/body)

Designer

Chage Record

No. Date

Change content

ECO No.

２／２

１９０＊２６０

Ｌｉｙａｎｊｕｎ

ＭＡＮＵＡＬ，ＯＷＮＥＲＳ

Designer

Confirm

P/No.: 3828FI3833V

V-CA241NT**\NE** V-CA241HT**\HE** V-CA251NT**\NE** V-CA251HT**\HE** V-CA261NT**\NE** V-CA261HT**\HE**

Table of contents

Information for Your Safety......................................................................................3

How to Use.................................................................................................................4

Assembling cleaner...............................................................................................................4

Using the cleaning head and Accessory Nozzles..................................................................6

Emptying the Dust Chamber .................................................................................................8

Cleaning the Filter ................................................................................................................9

Operating the cleaner..........................................................................................................10

Cleaning the Exhaust Filter .................................................................................................11

How to use elbow tube, turbine brush.................................................................................12

User's guide for sani punch vacuum nozzle ........................................................13

Features ..............................................................................................................................13

Cleaning Vacuum Nozzle for Bedding.................................................................................15

P/No.: 3828FI3833V

Information for Your Safety

Please read all the following information, which contains important instructions for the safety, the use and the maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.

❏ Never allow children to use the appliance unsupervised. ❏ Do not use the appliance If the power cord is damaged or faulty. ❏ If the power cord is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard. ❏ Always switch the vacuum cleaner off before:

Emptying the dust chamber. Cleaning or changing the filters.

❏ Do not vacuum flammable or explosive substances(liquids or gases). ❏ Do not vacuum hot ash, embers etc. nor sharp objects. ❏ Do not vacuum water or other liquids. ❏ Do not unplug by pulling on cord. ❏ Use only LG's recommended filters. ❏ When you vacuum with an attachment appliance that has a rotating brush roller:

Do not reach into the running brush roller.

Thermal protector: This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly shuts off, turn off the switch and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust chamber, a blocked hose or clogged filter. If these conditions are found, clean the dust chamber and filters (refer to 8~9 page) and wait at least 30 minutes before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and turn on the switch. If the cleaner still does not run, contact a qualified electrician.

P/No.: 3828FI3833V

How to Use

Assembling Cleaner

Fit the large cleaning head into the end of the tube.

Spring latch

(depending on model)

Telescopic tube

The 2 position head,Turbine Brush(depending on model)

Push telescopic tube into nozzle outlet.

Telescopic tube (depending on model)

• Press the spring latch to release.

• Pull out the tube to the desired length.

• Release spring latch to lock the tube in position.

• Push telescopic tube into hose handle firmly. (depending on model)

P/No.: 3828FI3833V

Attachment Point

Head

Button

Flexible Hose

(depending on model)

Connecting the flexible hose

• Push the end of the head on the flexible hose into the attachment point on the vacuum cleaner.

• To remove the flexible hose from the vacuum cleaner, press on the button situated on the head, then pull the head out of the vacuum cleaner.

CAUTION

• Suction power may be weakened when insignificant dusts are sucked. In this case, clean the filter.

• Make the dust box empty if dusts are filled to the maximum degree and then clean the filter when it becomes 5 times.

P/No.: 3828FI3833V

How to Use

Tear the vinyl bag and pull out accessories. Attach the accessory holder onto the telescopic tube. And then, fit the Dusting Brush, Crevice Tool and Upholstery Nozzle onto the accessory holder.

Using the cleaning head and Accessory Nozzles

Upholstery Nozzle

Upholstery Nozzle is for vacuuming upholstery, mattresses, etc. The thread collectors help to pick up the threads and fluff.

Dusting Brush

Dusting Brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces. Dusting Brush is also used for cleaning Filters.

Crevice Tool

Crevice Tool is for vacuuming in those normally hard-to-reach places such as reaching cobwebs, or between the cushions of a sofa.

P/No.: 3828FI3833V

4 5 8

Pedal

Suction Hole for Device Protection

Extension Pipe for Length Adjustment

Sani punch nozzle (depending on model)

Refer to Page 13~16

The 2 position head (depending on model)

• The 2 position cleaning head equipped with

a pedal which allows you to alter its position according to the type of floor to be cleaned.

• Hard floor position (tiles, parquets floor)

Press the pedal to lower brush.

• Carpet or rug position

Press the pedal to lift the brush up.

Suction Hole for Device Protection

You can perform cleaning at any place like corner or crevice since revolution of the suction hole is free.

How to Clean

1. Remove dusts accumulated where the floor surface of the suction hole for device protection is dirty.

2. Cleaning of the whole suction hole with water may cause failure of product performance. Wipe it out with a dry cloth.

P/No.: 3828FI3833V

3 4 5 6 71 2

(depending on model) (depending on model)

Button

Dust chamber cap

Pleat-shaped internal filter

Circle-shaped external filter

Plate

Dust chamber cap

Dust chamber

How to Use

Emptying the dust chamber

Suction power may be weakened when insignificant dusts are sucked. In this case, clean the filter.

• Turn off the vacuum cleaner and unplug it.

• Your vacuum cleaner is equipped with both a dust chamber

and a motor filters.

Press the button and pull the dust chamber forward. Remove the dust chamber cap. Clean the pleat-shaped and the circle-shaped filters.

• To reinstall the dust chamber, replace the dust chamber cap and push the dust chamber into the tank mount as far as it will go.

• Open the dust chamber cap.

• Remove two plates from the dust chamber.

• Wash both parts with softcloth. Gently rinse both parts

under cold running water.

P/No.: 3828FI3833V

How to Use

Cleaning the Filter

0 12 24Hrs

Button

The reusable filters are situated under the dust chamber cap and you can use it permanently.

• Press the button and pull the dust chamber forward.

• Open the dust chamber cap.

• Remove the filters by rotating it counter-clockwise.

• Clean the filters with the dusting brush under cold running water.

• Allow the filters to dry in a shaded location for a day.

• Make the dust chamber empty if dusts are filled to the maximum degree and then clean the filter.

Do not use the wet filter to avoid clogging.

WARNING!

Gently rinse both parts separately under a cold running water until the water runs clear. Do not use detergent or a washing machine or dishwasher. Shake off excess water from the filter.

Do not tumble/spindry, microwave or place in oven or on direct heat.

Ensure the filter is completely dry. Re-assemble and place it back in your machine, filter frame.

If the filter is damaged, do not place them in the machine. Please call the Helpline.

Do not use the net-shaped filter seperately.

MAX

MIN

FLOOR CARPET

SOFA

CURTAIN

OFF

1 2

Open

Suction control switch

Regulator

Switch button

Cord reel button

Plug

How to Use

Operating the cleaner.

How to Plug in and Use

• Pull out the power cord to the desired length and plug into the socket.

• Push the suction control switch of the hose handle in the direction of the position what you want. (depending on model)

• To stop it, push down the suction control switch in the direction of OFF. (depending on model)

• Press switch button to start the vacuum cleaner. (depending on model)

• To stop it, press the switch button again. (depending on model)

• Press the cord reel button to retract the power cord after use.

Park System

• To store after vacuuming and pause while vacuuming.

• For deposit after vacuuming, for example to move a small piece of furniture or a rug, use the Park system to support the flexible hose and cleaning head.

- Slide the hook on the large

cleaning head into the slot on the rear of the dust chamber.

Adjusting the Suction level(depending on model)

• Adjust suction with the suction control switch in the hose handle. (depending on model)

• The flexible hose handle has a manual air flow regulator which allows you to adjust the suction level briefly. (depending on model)

P/No.: 3828FI3833V

+ 24 hidden pages