LG V409V Users manual

USER GUIDE

/0V409V

ENGLISH

www.lg.com

Custom-designed Features

Video recording features

Wide-angle camera

You can take photos or record videos with a wider range than your actual field of vision by using the wide-angle on the front and rear camera.

, then tap / or / to switch between the

Tap standard and wide-angle.

• See

Starting the camera

for details.

Custom-designed Features

Cine Video

You can record a movie-like video.

Tap , then tap MODE Cine Video .

Tap to record a video.

• : Record a video by selecting the point zoom feature to zoom in/

out around a specific desired area.

: Select an effect to apply to the recording. You can also adjust

•

the vignette and strength for each Cine effect. This feature cannot be changed after you have started recording.

• The Point zoom feature supports a zoom speed of up to 3x.

• This feature only supports video recordings in standard angle.

Graphy

You can apply the recommended values for the white balance, ISO and shutter speed as if taken by an expert.

Tap , then tap MODE Manual ( ).

Tap and then tap Graphy photos to activate the feature.

Tap and select the desired scene from the recommended images.

Tap to take a photo.

• This feature is available only in Manual camera mode.

• You can add more scenes by tapping

app from the Play Store. You may be charged for data usage, depending on your pricing plan.

Custom-designed Features

and downloading the Graphy

Match shot

Link two photos or videos together and then save it as a single content unit.

Tap , then tap MODE .

To take a photo, tap . To record a video, tap .

• : Record two split screens at the same time.

• : Record two split screens individually.

• : Import previous photos, videos, or images to create a match

shot.

: Rotate the imported photos or images.

•

• : Change the order of the imported photos or images.

Tap to save (if necessary).

Snap shot

You can take a photo or record a video and preview it right away.

Tap , then tap MODE .

Tap to take a photo. To record a video, tap .

Custom-designed Features

Guide shot

You can use an image as a guide to take photos with the same composition. Any photo in the Gallery can be used as a guide.

Tap , then tap MODE .

Place the desired subject on a translucent guide image, then tap .

• Use the slide bar to control the background transparency.

Grid shot

You can take photos or record videos for 4 different scenes in a row and save them as a single content.

Take photos or 3-second-long videos in sequence and then save them as a single file.

Tap , then tap MODE .

Tap to take a photo. To record a video, tap .

Tap to save.

• Tap a previously taken photo/video to retake it.

Custom-designed Features

Tracking focus while using the camera

You can track and maintain focus on an object while taking photos or recording videos.

Tap , then tap Tracking focus.

Before recording a video or taking a photo, lightly tap the screen to

select an object to focus on.

Take the photo or start recording your video.

• See

Starting the camera

• To use this feature, select the standard camera (

or recording videos.

• This feature is unavailable when you use the front camera or the wide-

angle camera.

• This feature is unavailable in the following cases:

- Video size limitation: Resolution is set as UHD 16:9.

- FPS limitation: FPS is set as 60 FPS.

for details.

) for taking photos

Steady recording

You can use the Steady recording feature to minimise motion blur while recording a video.

, then tap Steady recording.

Tap

• See

Starting the camera

• This feature is available only in specific modes.

Custom-designed Features

for details.

Hi-Fi video recording

You can record a high quality video with Hi-Fi sound.

, then tap MODE Manual ( ) Hi-Fi.

Tap

• See

Starting the camera

• Hi-Fi videos can only be played in apps that support Hi-Fi.

for details.

Camera roll

You can view the photos and videos you have taken on the camera preview screen.

, then tap Camera roll.

Tap

• When you take photos or record videos, you can view the thumbnails

for the saved pictures along the side of the screen.

• Scroll the thumbnail lists up or down to browse the photos and videos.

• Tap a thumbnail to view the photo or video on the camera screen.

• Tap the thumbnail again to return to the camera viewfinder.

• This feature is not supported when you take a photo or record a video in

the 18:9 aspect ratio.

• This feature is available only in the Auto camera mode.

Custom-designed Features

Gallery features

Floating button

You can use the floating button at the lower part of the Gallery app screen in landscape mode.

• After dragging the

button to return to the Home screen.

• You can drag the button to the left or right to move the floating

button as desired.

button upwards, release it when you reach the

Custom-designed Features

Related content

You can edit and customise related content in the Gallery.

While viewing a picture preview, tap .

When the icon related with the date or location where you took the

photo appears, touch the screen.

• You can view the photos related with the date or location where

you chose.

• Tap to access additional options.

Custom-designed Features

Making a GIF

You can create a GIF file from the Gallery.

While viewing an album, tap Create GIF.

Select the desired photos and videos to create a GIF file and then tap

NEXT.

• You can add more images and adjust the GIF speed, screen ratio,

and file order.

Tap SAVE.

• A maximum of 100 images can be used to create a GIF file.

Making a collage

You can make a collage from the associated content.

While viewing an album, tap Make collage.

Select the desired images to add to the a collage and then tap NEXT.

• Select the desired layout from the bottom of the screen.

Tap MAKE.

• A maximum of 9 images can be used to create a collage.

Custom-designed Features

Making a video from the related content

You can gather related content to make a video clip by tapping on the video displaying the date or location.

Select the theme and background music, adjust caption effects and order or add date and your signature and then tap SAVE.

: Select the video theme.

•

- To download the theme, tap . : Add background music or adjust the playback time.

•

- To select a file for the background music, tap .

- To download a file for the background music, tap .

- To adjust the volume of background music and original video, tap .

• : Select a font face.

- To download a font, tap .

: Change the order of files to play as a video.

•

- To add files, tap .

Custom-designed Features

• Download the VASSET app from the Play Store to add video themes,

background music or font faces. If you use mobile data without Wi-Fi connection, you may be charged

for data usage.

Creating a movie

You can create a new movie by putting images and videos together.

Tap , then tap Create movie.

Select images or videos for your movie and tap NEXT.

Edit the selected images and videos and then tap SAVE.

Custom-designed Features

Deleting files

You can select images or videos to delete from your video by tapping at the top right corner of its thumbnail.

Adding files

You can select images or videos to add after tapping at the bottom of the screen. You can also select the images or videos you have already previously added.

• Touch and hold a file, and then tap another file for multiple selection.

Rearranging files

To rearrange the images and videos, touch and hold the file you want to move, then dragging it to the desired location.

Adding file effects

Tap to add a theme or background music, change the font.

Resetting the movie edits

You can reset the edits made to the movie (e.g. play time) by tapping .

Previewing a file

Check your new video before saving it by tapping . After the playback time elapses, the next file is played automatically.

• A maximum of 50 images and videos can be used to create a video.

• The playback time for an image is 3 seconds by default and it cannot be

changed. Videos can be trimmed down to a minimum of 1 second.

• This feature may not support some image or video formats.

Custom-designed Features

Making a GIF

You can easily make a GIF file using recorded video.

At the desired starting point while watching a video, tap .

Select the length of the GIF you want to create.

• GIF is generated for the time selected from the current time.

• For videos less than 5 seconds, GIF images are automatically

generated for the remaining time.

• You may use this feature solely for creative purposes. The use of this

feature involving infringement of any other person’s rights, such as copyright or defamatory or offensive statements, may be subject to civil, criminal, or administrative liabilities and/or penalties under applicable laws. You shall not copy, reproduce, distribute, or otherwise make illegal use of any copyrighted materials without permission of the rightful owner or copyright holder. To the fullest extent permitted by applicable law, LG Electronics disclaims all expressed and implied warranties as well as liabilities associated thereto.

Custom-designed Features

Floating Bar

Floating Bar overview

You can activate frequently used features, including shortcuts, screenshots, music player, and quick contacts, by touching and then swiping the Floating Bar on the screen.

To enable the Floating Bar feature, tap

Floating Bar .

Opening and closing the Floating Bar

• To open the Floating Bar: Tap or .

• To close the Floating Bar: Tap or .

Settings General

Custom-designed Features

Moving the Floating Bar position

• Floating bar open: Touch and hold the Floating Bar, then drag it to the

desired location.

• Floating bar closed: Touch and hold the Floating Bar, then drag it to

the desired location along the edge of the screen.

• The Floating Bar can only be moved within the area between the Status

bar and Quick access bar. See

Home screen layout

for details.

Disabling the Floating Bar

You can disable the Floating Bar by using one of the following methods:

• Touch and hold

delete area at the top of the screen.

or on the Floating Bar, then tap at the top of the

• Tap

screen.

Settings General Floating Bar .

• Tap

or on the Floating Bar and then drag it to the

Custom-designed Features

Setting the Floating Bar

You can select content to display on the Floating Bar and change its display order. Tap

Floating Bar.

• Shortcuts: Quickly access frequently used apps or features.

• Screen capture: Capture the screen to crop the desired part or to

create a GIF file.

• Quick contacts: Call or message people set as quick contacts.

• Music player: Control the music you are listening to.

• A maximum of 5 apps or features can be added to the shortcuts.

• A maximum of 5 contacts can be added as quick contacts.

• You may use this feature solely for creative purposes. The use of this

• A GIF can be created up to 15 seconds long.

from the Floating Bar or tap Settings General

Launch Capture+ on the desired screen.

Launch Extended capture to capture a scrolling screen.

Capture a desired part of a screen. Save a current screen as a GIF file. You can adjust the size of the

image you want to capture.

•To move to the desired location, drag

•To start recording a GIF, tap .

•To stop recording a GIF, tap .

Custom-designed Features

Audio recording features

The HD Audio Recorder allows you to configure the audio settings manually so that you can record audio based on your environment.

Recording modes

You can record a high definition audio file by selecting and configuring the desired audio mode to suit the recording environment.

Essentials HD Audio Recorder .

Tap

Normal

You can record audio without extra settings.

Concert

You can record audio in a concert or other music event.

Custom

You can manually configure the desired settings to record audio.

Studio Mode

With Studio mode, you can play an audio file or music and record your voice at the same time, create a chord by recording your voice multiple times, and record your comments over the presenter’s or speaker’s original audio file.

Tap Essentials HD Audio Recorder Custom.

Tap .

Select an audio file to use as background music.

Tap to record voice.

Tap to save the recorded file.

• Background music can only be played through earphones. Make sure to

plug in earphones before using this feature.

Custom-designed Features

Other useful features for use of the HD Audio Recorder app

GAIN

You can adjust the sensitivity of the sound recorded by the microphone. The higher the GAIN value is set, the more sensitively the sound is

recorded.

LCF

You can filter any low-pitched noises such as the low hum of the air conditioner.

The higher the LCF (Low Cut Filter) value is set, the better high-frequency noises are filtered.

LMT

It can prevent clipping of the recorded sound. The higher the LMT (Limiter) value is set, the more low frequency sounds that will not get clipped.

• To change additional settings, tap Settings, then customise the file

type, bit depth, sampling rate and other settings.

• When you select a mode from Concert and Custom,

and then select the microphone to use.

• You can monitor sound quality with the connected earpiece while

recording audio. While recording audio in Studio mode, sound monitoring is not supported. You can hear only the background music.

appears. Tap.

Custom-designed Features

Fingerprint recognition

Fingerprint recognition overview

You must register your fingerprint on your device first before using the fingerprint recognition function.

You can use the fingerprint recognition function in the following cases:

• To unlock the screen.

• To view the locked content in the Gallery or QuickMemo+.

• Confirm a purchase by signing in to an app or identifying yourself with

your fingerprint.

• Your fingerprint can be used by the device for user identification. Very

similar fingerprints from different users may be recognised by the fingerprint sensor as the same fingerprint.

• If the device cannot detect your fingerprint, or you forgot the value

specified for registration, visit the nearest LG Customer Service Centre with your device and ID card.

Precautions for fingerprint recognition

Fingerprint recognition accuracy may decrease due to a number of reasons. To maximise the recognition accuracy, check the following before using the device.

• The device’s Power/Lock key has a fingerprint sensor. Ensure that the

Power/Lock key is not damaged by a metallic object, such as coin or key.

• When water, dust or other foreign substance is on the Power/Lock key

or your finger, the fingerprint registration or recognition may not work. Clean and dry your finger before having the fingerprint recognised.

• A fingerprint may not be recognised properly if the surface of your

finger has a scar or is not smooth due to being soaked in water.

• If you bend your finger or use the fingertip only, your fingerprint may

not be recognised. Make sure that your finger covers the entire surface of the Power/Lock key.

Custom-designed Features

• Scan only one finger for each registration. Scanning more than one

finger may affect fingerprint registration and recognition.

• The device may generate static electricity if the surrounding air is

dry. If the surrounding air is dry, avoid scanning fingerprints, or touch a metallic object such as coin or key before scanning fingerprints to remove static electricity.

Registering fingerprints

You can register and save your fingerprint on the device to use fingerprint identification.

Tap Settings General Fingerprints & security Fingerprints.

• A lock screen must be set in order to be able to use this feature.

• If the screen lock is not active, configure the lock screen by following the

on-screen instructions. See

Locate the Power/Lock key on the back of the device and gently put

your finger on it to register the fingerprint.

• Gently press the Power/Lock key so that the sensor can recognise your

fingerprint. If you press the Power/Lock key with an excessive force, the screen lock function may start or the screen may be turned off.

• Ensure that your fingertip covers the entire surface of the sensor of the

Power/Lock key.

Setting a screen lock

for details.

Custom-designed Features

Follow the on-screen instructions.

• Repeat scanning the fingerprint by moving your finger little by little

until the fingerprint registers.

When the fingerprint registration is done, tap OK.

• Tap ADD MORE to register another fingerprint. If you register

only one fingerprint and the corresponding finger is not in a good condition, the fingerprint recognition may not work well. As the preventive measure against this kind of situation, register multiple fingerprints.

Managing fingerprints

You can edit or delete registered fingerprints.

Tap Settings General Fingerprints & security Fingerprints.

Unlock according to the specified lock method.

From the fingerprint list, tap a fingerprint to rename it. To delete it, tap

Unlocking the screen with a fingerprint

You can unlock the screen or view the locked content by using your fingerprint. Activate the desired function:

Tap Settings General Fingerprints & security Fingerprints.

Unlock according to the specified lock method.

On the fingerprint settings screen, activate the desired function:

• Screen lock: Unlock the screen with a fingerprint.

• Content lock: Unlock content with a fingerprint. To do this, make

sure that the content lock is set.

Custom-designed Features

Face Recognition

Face Recognition overview

You can unlock the screen lock by using the saved facial data.

• This feature may be more vulnerable to security than the other screen

locks, such as Knock Code, Pattern, PIN, and Password.

• When a similar face or a photo of your face is used, the screen may be

unlocked.

• The recognised facial data is securely stored in your device.

• When the face recognition is selected for screen lock, you must enter

the Knock Code, Pattern, PIN, or Password that has been used for face registration without directly using the face recognition after the power is turned on. Accordingly, be careful not to forget the specified value.

• If the device cannot detect your face, or you forgot the value specified

for registration, visit the nearest LG Customer Service Centre with your device and ID card.

• To save power, the Face Recognition feature will not work when the

battery level is below 5 %.

Precautions for Face Recognition

Face Recognition accuracy may decrease in the following cases. To increase its accuracy, check the following before using the device.

• When your face is covered with a hat, eyeglasses, or mask, or your face

is significantly different due to heavy makeup or beard.

• When there are fingerprints or foreign substances on the front of the

camera lens, or your device cannot detect your face due to a too bright or dark light.

Custom-designed Features

Registering facial data

Before using the Face Recognition feature, register your facial data on your device.

Tap Settings Display Lock screen Face Recognition.

• To use this feature, the screen lock must be set with a Knock Code,

Pattern, PIN, or Password.

• When the screen lock is not set, register the data by following the

on-screen instructions. See

Raise your device in the front of your eyes.

• Register your face in a room that is not too bright or dark.

• Position your entire face inside the guideline on the screen, and then

adjust it by slowly moving up, down, left, or right.

When the face registration is done, tap OK.

Setting a screen lock

for details.

Unlocking the screen with your face

You can release the screen lock with your face instead of a Knock Code, Pattern, PIN, or Password.

Tap Settings Display Lock screen Select screen lock.

Unlock the screen according to the specified method.

Tap Allow face recognition to allow you to unlock the screen

using facial recognition.

Custom-designed Features

Improving the Face Recognition

You can add facial data in various conditions to improve Face Recognition.

Tap Settings Display Lock screen Face Recognition.

Unlock the screen according to the specified method.

Select Improve face recognition.

When the face registration is done, tap OK.

Deleting facial data

You can delete the registered facial data and register it again if the Face Recognition does not work properly.

Tap Settings Display Lock screen Face Recognition.

Unlock the screen according to the specified method.

Select Delete face to delete the facial data.

Unlocking the screen with your face when the screen is turned off

With the screen turned off, raise your device and look at the front of the screen. The device can detect your face and the screen is unlocked.

To deactivate this feature, follow the instruction below.

Tap Settings Display Lock screen Face Recognition.

Unlock the screen according to the specified method.

Drag Allow when screen is off to deactivate the feature.

• Face Recognition feature is available only when the screen is locked.

Custom-designed Features

Unlocking the screen with Face Recognition and then screen swiping

With the screen turned off, you can unlock the screen by performing Face Recognition and then swiping the screen.

Tap Settings Display Lock screen Face Recognition.

Unlock the screen according to the specified method.

Drag Swipe to unlock after face recognized to activate the

feature.

Enhancing the Face Recognition

You can prevent your device from being unlocked by photos, images, or videos.

Tap Settings Display Lock screen Face Recognition.

Unlock the screen according to the specified method.

Drag Advanced face recognition to activate the feature.

• Face Recognition speed may decrease when you activate this feature.

Custom-designed Features

Voice Recognition

Voice Recognition overview

You can unlock the screen by using your voice.

• This feature may be more vulnerable to security than the other screen

locks, such as Knock Code, Pattern, PIN, and Password.

• When a similar voice or your recorded voice is used, the screen may be

unlocked.

• When the voice recognition is selected for screen lock, enter the Knock

Code, Pattern, PIN or Password that has been used for voice registration instead of voice recognition after your device is turned on. Accordingly, be careful not to forget the specified value.

• If the device cannot detect your voice or you forgot the value specified

for registration, visit the nearest LG Customer Service Centre with your device and ID card.

• The recognised voice data is securely stored in your device.

Precautions for Voice Recognition

Voice Recognition accuracy may decrease in the following cases. To increase its accuracy, check the following before using the device.

• When you speak different from the registered voice command.

• When you speak in a noisy place.

• When the microphone hole is covered with your hand or any foreign

substances.

• When the registered voice command is too short (3 to 5 syllables are

recommended).

Custom-designed Features

Registering a voice command

Before using the Voice Recognition feature, you must register your voice commands on your device.

Tap Settings Display Lock screen Voice Recognition.

• To use this feature, the screen lock must be set with a Knock Code,

Pattern, PIN, or Password.

• When the screen lock is not set, register the data by following the on-

screen instructions. See

Tap START.

Follow the on-screen instructions to register a voice command.

• Say a voice command 4 times with a clear and loud voice.

• Register the voice command in a quiet place.

• Register a voice command within 2 - 3 words. (e.g. ‘Hi, LG’ or ‘LG

Mobile’)

When the voice command has been registered, tap OK.

Changing a voice command

You can change the previously registered voice command.

Tap Settings Display Lock screen Voice Recognition.

Unlock the screen according to the specified method.

Tap Change voice.

Follow the on-screen instructions to register the voice command

again. When the voice command has been changed, tap OK.

Setting a screen lock

for details.

Custom-designed Features

Deleting a voice command

You can delete a registered voice command.

Tap Settings Display Lock screen Voice Recognition.

Unlock the screen according to the specified method.

Tap Delete voice.

• In this case, you cannot use the unlock function for Voice

Recognition lock.

• To register the voice command again after you have deleted it, see

Registering a voice command

Selecting the voice recognition method

You can select how to use the voice recognition.

Tap Settings Display Lock screen Voice Recognition.

Unlock the screen according to the specified method.

Tap Voice recognition used to.

• Unlock: Unlock the device via voice command.

• Turn on screen: Turn on the screen via voice command.

Displaying the slide lock screen after Voice Recognition

Even with the screen off, you can recognise your voice and then release the lock screen by swiping.

Tap Settings Display Lock screen Voice Recognition.

Unlock the screen according to the specified method.

Drag Swipe to unlock after voice recognized to activate the

feature.

Custom-designed Features

+ 97 hidden pages