LG TPNC306SLA0 Owner’s Manual
ENGLISH FRANÇAIS
PORTUGUÊS
LG Floor Standing
Air Conditioner
OWNER'S MANUAL
LG
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating Your Air-Conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
Prior to installation, this air-conditioning
unit must be submitted for approval by the
utility service which provides electricity
(EN 61000-2, 61000-3 Norm).
website http://www.lgservice.com
TPNC306SLA0 (Indoor Unit)
TPUC306SLA0 (Outdoor Unit)
2 Floor Standing Air Conditioner
Floor Standing Air Conditioner Owner’s Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each
unit.
Dealer's Name
Date Purchased
■
Staple your receipt to this page in the event you
need it to prove date of purchase or for warranty
issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for
service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
• Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
Safety Precautions.................3
Prior to Operation ..................8
Introduction ............................8
Operating Instructions...........9
Maintenance and Service ....20
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by
a person responsible for their safety.
Safety Precautions
Owner's Manual 3
ENGLISH
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
■ Meanings of symbols used in this manual are as shown below.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage.
Be sure not to do.
Be sure to follow the instruction.
WARNING
■ Installation
Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.
• There is risk of fire or electric
shock.
For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.
• Do not disassemble or repair
the product. There is risk of fire
or electric shock.
Always ground the product.
• There is risk of fire or electric
shock.
Install the panel and the
cover of control box
securely.
• There is risk of fire or electric
shock.
Always install a dedicated
circuit and breaker.
• Improper wiring or installation
may cause fire or electric
shock
Use the correctly rated
breaker or fuse.
• There is risk of fire or electric
shock.
WARNING
CAUTION
Safety Precautions
4 Floor Standing Air Conditioner
■ Operation
Do not modify or extend the
power cable.
• There is risk of fire or electric
shock.
Do not install, remove, or reinstall the unit by yourself
(customer).
• There is risk of fire, electric
shock, explosion, or injury.
Be cautious when unpacking
and installing the product.
• Sharp edges could cause
injury. Be especially careful of
the case edges and the fins on
the condenser and evaporator.
For installation, always contact the
dealer or an Authorized Service Center.
• There is risk of fire, electric
shock, explosion, or injury.
Do not install the product on a
defective installation stand.
• It may cause injury, accident,
or damage to the product.
Be sure the installation area
does not deteriorate with age.
• If the base collapses, the air
conditioner could fall with it,
causing property damage,
product failure, and personal
injury.
Do not plug or unplug the
power supply plug during
operation.
• There is risk of fire or electric
shock.
Do not touch(operate) the
product with wet hands.
• There is risk of fire or electrical
shock.
Do not place a heater or
other appliances near the
power cable.
• There is risk of fire and electric
shock.
Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open
.
• Moisture may condense and
wet or damage furniture.
Take care to ensure that power
cable could not be pulled out or
damaged during operation.
• There is risk of fire or electric
shock.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
Safety Precautions
Owner's Manual 5
ENGLISH
Do not allow water to run
into electric parts.
• It may cause There is risk of
fire, failure of the product, or
electric shock.
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure of
product.
Do not use the product in a
tightly closed space for a
long time.
• Oxygen deficiency could occur.
When flammable gas leaks,
turn off the gas and open a
window for ventilation
before turn the product on.
• Do not use the telephone or turn
switches on or off.
There is risk of explosion or fire
If strange sounds, or small or
smoke comes from product. Turn
the breaker off or disconnect the
power supply cable.
• There is risk of electric shock or
fire.
Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.
• There is risk of property
damage, failure of product, or
electric shock.
Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)
• There is risk of physical injury,
electric shock, or product failure.
When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.
• There is risk of fire or electric
shock.
Be cautious that water could
not enter the product.
• There is risk of fire, electric
shock, or product damage.
Ventilate the product from time to time when
operating it together with a stove, etc.
• There is risk of fire or electric shock.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of electric shock.
Gasolin
Safety Precautions
6 Floor Standing Air Conditioner
■ Installation
CAUTION
■ Operation
Always check for gas (refrigerant)
leakage after installation or repair
of product.
• Low refrigerant levels may
cause failure of product.
Install the drain hose to
ensure that water is drained
away properly.
• A bad connection may cause
water leakage.
Keep level even when
installing the product.
• To avoid vibration or water
leakage.
Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.
• It may cause a problem for
your neighbors.
Use two or more people to lift
and transport the product.
• Avoid personal injury.
Do not install the product where it
will be exposed to sea wind (salt
spray) directly.
• It may cause corrosion on the
product. Corrosion, particularly
on the condenser and
evaporator fins, could cause
product malfunction or
inefficient
operation.
90°
When the product is not be used for a long
time, disconnect the power supply plug or
turn off the breaker.
• There is risk of product damage or failure, or
unintended operation.
Take care to ensure that nobody could step
on or fall onto the outdoor unit.
• This could result in personal injury and product
damage.
Do not expose the skin directly to cool air for
long periods of time.
(Don't sit in the draft.)
• This could harm to your health.
Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.
• There is risk of
damage or
loss of property.
Safety Precautions
Owner's Manual 7
ENGLISH
Do not block the inlet or
outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
• There is risk of fire, electric
shock, or damage to the plastic
parts of the product.
Do not touch the metal parts of
the product when removing the
air filter. They are very sharp!
• There is risk of personal injury.
Do not step on or put
anyting on the product.
(outdoor units)
• There is risk of personal injury
and failure of product.
Do not insert hands or other
objects through the air inlet or
outlet while the product is operated.
• There are sharp and moving
parts that could cause personal
injury.
Do not drink the water
drained from the product.
• It is not sanitary and could cause
serious health issues.
Use a firm stool or ladder
when cleaning or
maintaining the product.
• Be careful and avoid personal
injury.
Replace the all batteries in the
remote control with new ones of
the same type. Do not mix old
and new batteries or different
types of batteries.
• There is risk of fire or explosion
Do not recharge or disassemble the batteries.
Do not dispose of batteries in a fire.
• They may burn or explode.
If the liquid from the batteries gets onto your
skin or clothes, wash it well with clean water. Do
not use the remote if the batteries have leaked.
• The chemicals in batteries could cause burns or
other health hazards.
Thinner
ax
W
Prior to Operation
8 Floor Standing Air Conditioner
Prior to Operation
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/unplugging the power cord.
6. If the cord/plug is damaged, replace it with only an authorized replacement part.
1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose
occupants, pets, or plants to direct airflow for a long time.
2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance
together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision
devices, food, pets, plants, or art objects). Such use may damage your properties.
1. Do not use water to clean inside the air conditioner. Exposure to water can destroy the
insulation, leading to electric shock.
2. When cleaning the unit, first make sure that the power and breaker are turned off. The fan
rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is
triggered while cleaning inner parts of the unit.
For repair and maintenance, contact your authorized service dealer.
Preparing for Operation
Usage
Cleaning and Maintenance
Service
Introduction
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the
air conditioner.
This symbol indicates special notes.
NOTICE
Symbols used in this Manual
Operating Instructions
Owner's Manual 9
ENGLISH
Operating Instructions
Features and Specifications
INDOOR UNIT
1. Air Outlet Vent
2. Control Panel
3. Air Intake Vent
OUTDOOR UNIT
1. Air Outlet
2. Air Inlet(Rear Side)
3. Control Cover
4. Base Panel
5. Ground Terminal
6. Refrigerant Pipe Port
7. Top Cover
1. 3D Wide Airflow System
3D Wide Airflow makes clear a dead
Zone to cool the indoor evenly within a
Early time
2. Whisper quiet operation
3. 3 Fan Step Cooling
4. 3 minutes Delay Circuit
5. Turbo-Z Operation
6. Auto Restart
7. Child Lock Function
1
2
1
3
4
7
2
3
6
5
Operating Instructions
10 Floor Standing Air Conditioner
Indoor Unit Controls and Indicators
1. Room &Setting Temperature Display
2. Cooling Operation Display
3. Soft Dry Operation Display
4. Fan Operation Display
5. Auto Operation Display
6. Outdoor Unit Operation Display
7. Off Timer Operation Display
Operating Instructions
Owner's Manual 11
ENGLISH
2
1
13
12
11
10
9
8
3
5
6
7
4
Name and Function-Remote Control
1. Signal Transmitter
Transmits the signals to the Floor Standing
Type air conditioner
2. Operation Display of the Remote Control
3. Fan Operation Button
4. Auto Airflow direction Control Button
The Top Vane swings up and down
5. Jet Cool(Turbo-Z) Operation Button
6. Indoor Fan Speed Selection Button
7. Temperature Setting Button
8. Power ON/OFF Button
Operation will start when this button is
pressed,and stop when the button is pressed
again.
9. Simple Off Timer Setting Button
Each time is pressed,the mode is changed in
the Following process, Tim set
(0,1,2,3,4,5,6,7 hrs) If you select "0",Timer
function will be canceled
10. Auto Airflow direction Control Button
The Side Vane swings left and right
11. Soft Dry Operation Button
12. Auto Operation Button
13. Cooling ON Button
Operating Instructions
12 Floor Standing Air Conditioner
Remote Control Preparation
How to insert batteries
Wireless Remote Control Puts all functions at your fingertips
1. Remove the cover from the back of the
remote controller.
• Slide the cover according to the arrow
direction.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Slide the cover into back position.
• Do not use rechargeable
batteries such batteries as
different from standard dry cells
in shape, dimensions, and
performance.
• Change the batteries with a
new one if the remote control
does not work properly after
using for an extended length of
time.
Handling the remote control
• Aim at the signal receptor on the Floor Standing Type air conditioner when operating.
• The remote control signal can be received at a distance of up to about 7meters.
• Be sure that there are no obstructions between the remote control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct sunlight,or next to a heating unit,or other
heat source.
Operating Instructions
Owner's Manual 13
ENGLISH
After
4 seconds
To raise the temperature
To lower the temperature
Low
Mid
High
Cooling Operation Mode
Press the on/off button.
Press the Mode Button
Select the cooling operation Mode( )
Set the temperature lower than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
When you finish the temperature setting.
Set the Fan Speed.
❑ Each time the Fan Speed Button is pressed (or fan speed key is touched), the
Fan Speed mode is shifted in the arrow direction.
Operating Instructions
14 Floor Standing Air Conditioner
Soft Dry Operation
Press the on/off button.
Press the Mode Button
Select the Soft Dry Operation Mode( )
Set the temperature lower than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
During Softy Dry Operation
• The indoor fan speed is automatically set to low and can be set fan speed.
Temp. Fan Speed On/Off
Mode
Mode
Temp. Fan Speed On/Off
FAN SPEED
SET
L M H
ROOM
To raise the temperature
Mode
Temp. Fan Speed On/Off
To lower the temperature
Temp. Fan Speed On/Off
Mode
Low
Mid
High
Operating Instructions
Owner's Manual 15
ENGLISH
Temp. Fan Speed On/Off
Mode
ROOM
SET
L M H
FAN SPEED
Turbo-Z cooling Operation
❏ During the Turbo-Z Cooling function at any moment, the A/C starts to blow the cool air
at extremely high speed setting the room temp. automatically to 18°C. It is especially
used to cool the room temp. in the shortest time in a hot summer.
❏ In order to return to the normal cooling mode from the Turbo-Z Cooling mode, you just
press either the operation mode selection button, or the Turbo-Z Cooling button again.
NOTICE
Press the on/off button.
Press the Turbo-Z Cooling button to operate the speed cooling mode and the unit
will operate in super high fan speed on cooling mode.
To cancel the Turbo-Z Cooling mode, press the Turbo-Z Cooling button again or the Auto
Swing Direction Control Button (Up & Down, Left & Right) and the unit will operate in Mid
Fan speed on cooling mode.
Operating Instructions
16 Floor Standing Air Conditioner
Fan Operation Mode
Airflow Direction Procedure
Press the on/off button.
Press the Fan Operation Button.
Press the Auto Swing Button and then louvers will swing left
and right.
Press the Airflow Direction Control Button again to set the
Vertical louver at the desired airflow direction.
The vertical louver swing left and right.
Press the Auto Swing Button and then louvers will swing up
and down.
Press the Airflow Direction Control Button again to set the
horizontal louver at the desired airflow direction.
The horizontal louver swing up and down.
Operating Instructions
Owner's Manual 17
ENGLISH
Auto Operation
Cold Cool Proper
Warm Hot
Temp. Fan Speed On/Off
Mode
Temp. Fan Speed On/Off
Mode
To raise the temperature
(This indication will be shifted to the initial
uto Mode Display state after 4 seconds.)
To lower the temperature
Press the on/off button.
Press the Mode Button
Select the Artificial Intelligence Operation Mode( )
Set the temperature lower than the room temperature.
The temperature can be set within a range of by 1 level.
During Artificial Intelligence Operation
• The indoor fan speed is automatically set to low and can be set fan speed.
Operating Instructions
18 Floor Standing Air Conditioner
After 4
seconds
After 4
seconds
OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL)
When you finish the Off Timer setting, the Timer indicator lights off.
Press the on/off button.
Press the Timer Button.
During off-timer operation if you press the Timer Button, the rest time will be displayed.
• If you press the button, the selected off timer is displayed as follows;
• If you select ‘ ’, the Off Timer function will be cancelled.
Maintenance and Service
Owner's Manual 19
ENGLISH
Child Lock Operation Procedure
Touched the fan speed and high temperature setting keys simultaneously for 3 seconds.
The display key will be locked with beep after 3 seconds.
During Child Lock Operation
➊ Whenever you Touch any key on Display panel, it will immediately display
“ ”, which means Display panel is Locked.
❷ All the key on the indoor unit Display panel will not work.
❸ But the key on the remote controller will work.
For releasing child lock Operation
Press the fan speed and high temperature setting keys simultaneously for 3 seconds again.
The unit will respond with beep, Child Lock Operation will removed.
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to
operate procedures automatically to the previous operating conditions.
Maintenance and Service
20 Floor Standing Air Conditioner
Maintenance and Service
During the season
When the air conditioner is not going to be used for a long time
CAUTION : Before performing any maintenance, turn off the main power to the system.
Cleaning of the air conditioner
• Don’t wash with water.
• Wipe with a soft dry cloth.
Never use any of the followings.
• Water hotter than 40°C.
Could cause
deformation and/or
discoloration.
• Volatile substances.
Could damage the
surfaces of the air
conditioner.
CAUTION
CAUTION
1
1
2
2
3
3
1
1
2
2
Operate the air conditioner at the following
settings for 2 to 3 hours.
• Type of operation : Fan.
• Temperature setting : 30°C.
This will dry out the internal mechanisms.
Remove the batteries from the Remote Control.
Turn off the circuit breaker.
Turn off the circuit breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
At the end of the season
At the start of the season
Clean the air filters, re-insert, then operate
the air conditioner.
Be sure that nothing obstructs the air outlet
and intake vents.
Do not overcool the room.
This is not good for your health and
wastes electricity.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and windows
as much as possible to keep the
cool air in the room.
Keep blinds or curtains closed.
Do not let direct sunshine enter the
room when the air conditioner is in
operation.
Clean the air filter regularly.
Blockages in the air filter reduce
the airflow and lower cooling and
dehumidifying effects. Clean at
least once every two weeks.
Keep the room temperature
uniform.
Adjust the vertical and horizontal
airflow direction to ensure a
uniform temperature in the room.
Ventilate the room occasionally.
Since windows are kept closed, it
is a good idea to open them and
ventilate the room now and then.
Operation Tips
Loading...