Please read through this manual. It contains valuable
information about your air conditioner. This manual may help
save time and money by explaining proper product
maintenance and preventing improper use.
PRECAUTIONS
Pay close attention to precautions in order to prevent
potential hazards and damage from misuse or improper
installation. LG is not responsible for any damages caused by
misuse of the product.
Prior to installation, this air-conditioning unit must be
submitted for approval by the utility service which
provides electricity(EN 61000-3 Norm.)
To prevent injury to the user or other people and property damage, the following instructions must be
followed.
■ Be sure to read before installing the air conditioner.
■ Be sure to observe the cautions specified here as they include important items related to safety.
■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
by the following indications.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
■ Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
■ Installation
Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.
• There is risk of fire or
electric shock.
For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.
•
Do not disassemble or repair
the product. There is risk of
fire or electric shock.
Always ground the product.
• There is risk of fire or
electric shock.
ENGLISH
Install the panel and the cover
of control box securely.
• There is risk of fire or
electric shock.
Always install a dedicated
circuit and breaker.
• Improper wiring or
installation may cause fire or
electric shock
Use the correctly rated
breaker or fuse.
• There is risk of fire or
electric shock.
ManualOwne r 's
3
Safety Precautions
Use the specified wires to
connect the unit.
• There is risk of fire or
electric shock.
For installation, always
contact the dealer or an
Authorized Service Center.
• There is risk of fire, electric
shock, explosion, or injury.
Do not let the air conditioner
run for a long time when the
humidity is very high and a
door or a window is left open.
• Moisture may condense and
wet or damage furniture.
Do not install, remove, or reinstall the unit by yourself
(customer).
• There is risk of fire, electric
shock, explosion, or injury.
Do not install the product
on a defective installation
stand.
• It may cause injury,
accident, or damage to the
product.
■ Operation
Take care to ensure that
power cable could not be
pulled out or damaged
during operation.
• There is risk of fire or
electric shock.
Be cautious when
unpacking and installing
the product.
•
Sharp edges could cause injury.
Be especially careful of the
case edges and the fins on the
condenser and evaporator.
Be sure the installation area
does not deteriorate with
age.
•
If the base collapses, the air
conditioner could fall with it, causing
property damage, product failure,
and personal injury.
Do not place anything on
the power cable.
• There is risk of fire or
electric shock.
Do not plug or unplug the power
supply plug during operation.
• There is risk of fire or
electric shock.
4 Single Package Type Air Conditioner
Do not touch(operate) the
product with wet hands.
• There is risk of fire or
electrical shock.
Do not place a heater or other
appliances near the power cable.
• There is risk of fire and
electric shock.
Safety Precautions
Do not allow water to run
into electric parts.
• It may cause There is risk
of fire, failure of the product,
or electric shock.
When flammable gas leaks,
turn off the gas and open a
window for ventilation
before turn the product on.
•
Do not use the telephone or
turn switches on or off.
There
is risk of explosion or fire
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure
of product.
Gasolin
If strange sounds, or small or
smoke comes from product.Turn
the breaker off or disconnect the
power supply cable.
• There is risk of electric
shock or fire.
Do not use the product in a
tightly closed space for a
long time.
• Oxygen deficiency could
occur.
Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.
• There is risk of property
damage, failure of product,
or electric shock.
ENGLISH
Do not open the panel of the
product during operation. (Do
not touch the electrostatic filter,
if the unit is so equipped.)
• There is risk of physical
injury, electric shock, or
product failure.
When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.
• There is risk of fire or
electric shock.
Ventilate the product from time to time when
operating it together with a stove, etc.
• There is risk of fire or electric shock.
Be cautious that water
could not enter the product.
• There is risk of fire, electric
shock, or product damage.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of electric shock.
ManualOwne r 's
5
Safety Precautions
When the product is not be used for a long
time, disconnect the power supply plug or
turn off the breaker.
• There is risk of product damage or failure, or
unintended operation.
■ Installation
Always check for gas
(refrigerant) pressure after
installation or repair of product.
• Low refrigerant levels may
cause failure of product.
Install the drain hose to
ensure that water is drained
away properly.
• A bad connection may
cause water leakage.
Take care to ensure that nobody could step
on or fall onto the unit.
• This could result in personal injury and
product damage.
Keep level even when
installing the product.
• To avoid vibration or water
leakage.
90°
Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.
• It may cause a problem for
your neighbors.
Don't use people to lift and
transport the product.
• Avoid personal injury.
Do not install the product
where it will be exposed to sea
wind (salt spray) directly.
•
It may cause corrosion on the product.
Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation.
Having perfect vacuum process in the factory, our units don't have drier but have filter in the
refrigerant circuit.
In case of recharging R-22 gas in the field,
"DRIER" must be installed on the liquid line which is connected from discharge part of
condenser to intake part of evaporator. Because the refrigerant circuit is capable of containing
water with imperfect vacuum.
6 Single Package Type Air Conditioner
■ Operation
Do not expose the skin directly to cool air for
long periods of time. (Don't sit in the draft.)
• This could harm to
your health.
Safety Precautions
Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.
• There is risk of
damage or loss
of property.
ENGLISH
Do not block the inlet or
outlet of air flow.
• It may cause product failure.
Do not step on or put
product.
• There is risk of personal
(outdoor units)
injury and failure of product.
anything on the
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
• There is risk of fire, electric
shock, or damage to the
plastic parts of the product.
Thinner
Wax
or
Do not insert hands or other objects
outlet while
• There are sharp and moving
parts that could cause
personal injury.
Do not touch the metal parts of
the product when removing the
air filter.They are very sharp!
• There is risk of personal
injury.
through the air inlet
the product is operated.
Do not drink the water drained from the
product.
• It is not sanitary and could cause serious
health issues.
Use a firm stool or ladder when cleaning or
maintaining the product.
• Be careful and avoid personal injury.
ManualOwne r 's
7
Operating Instructions
SYSTEM
COOL OFF HEAT
FAN
AUTO O N
SYSTEM
COOL OFF HEAT
50 60 70 80 90
Operating Instructions
Cooling Operation
Move the FAN switch back to the "AUTO" position.
• With the "FAN" switch in the "ON" position,
1
Indoor fan motor shall operate continuously
regardless of system switch position.
Move the system switch to the "COOL" position.
2
This unit has "time delay PCB" so there is 3minute(±45seconds) delay before compressor start.
Set the temperature lower than the room
3
temperature.
Move the system switch to the "OFF" position in
order to stop cooling operation.
4
8 Single Package Type Air Conditioner
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.