LG TH2517DSAV, TH2519SSAK Owner’s Manual

Download

MFL68267070

RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.

이 도면은 LG전자의 자산으로 불법 유출시 관계법과 회사규정에 의해 처벌됨.

0 1 2

SEC.

WORK

가

가 BRAND

나

MODEL

TH2519SSAK

TH2519DSAK TH2517DSAV

가

다

P/NO.

MFL68267070

PRINTING DEGREE EXTERIER INTERIER

1 1

MATERIAL AND PRINTING DESCRIPTION

모조지 80g OFFSET 인쇄

<< 주기 >>

1. 재질 : 모조지 80g

2. 인쇄 작업 1도 인쇄 * 표지 - LG GRAY PANTONE #430

* 내지 - BLACK

3. 문자의 크기 및 형상은 주어진 FILM에 준한다.

4. 책자의 크기는 일반적 규격(국판)에 준한다.

5. 양산 전에 설계 한도를 득할것.

6. 유해물질 관리 기준 :본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를 만족할 것.

LG MODEL 명

T1293*

SUFFIX

*EML *GSC

LANGUAGE

ENG

PAGE

REMARK

Sapience

REV. NO.

기호

REVISION DESCRIPTION

변경 사항

나

P/NO. 다

1 5 0 1 5 0

APPROVED

REF. NO.

시방 번호

년/월/일

DATE

PREPARED

시방자

승인자

<< NOTES >>

1. Material : Vellum paper

2. Print work

1 Degree * Cover - LG GRAY PANTONE #430

* Inside - Black

3. Printing, text size and line are based on LG designg film.

4. Size will Follow the standard.

5. Before product controlled by criteria sample.

6. Standard of supervision for hazardous material : The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE) and details should comply with LG standard of LG(63)-A-5501-34.

TRIG.

MODELING

김 은 수

19.01.11 19.01.11 19.01.11

LG 전자 (주)

LG Electronics Inc.

UNIT SCALE

REVIEWEDDESIGNED

CHECKED APPROVED

이 갑 선 이 창 훈

RELATED DWG.

DR COMPLETED

PDF

ILLUSTRATOR

MANUAL,OWNER’S

T L E

DWG. No.

Sapience Refresh

MFL68267070

도면 DR 완료

1/1

OWNER'S MANUAL

WASHING MACHINE

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

EN ENGLISH

TH2519SSAK

TH2519DSAK

MFL68267070

Rev.00_011119

TH2517DSAV

www.lg.com

TABLE OF CONTENTS

SAFETY INSTRUCTIONS .......................................................4

IMPORTANT SAFETY INSTRUCTIONS .....................................................4

INSTALLATION ......................................................................10

Parts ..........................................................................................................10

Accessories ...............................................................................................10

Specifications ............................................................................................11

Installation Place Requirements ................................................................12

Connecting the Supply Hose .....................................................................13

Installing the Drain Hose ...........................................................................15

Leveling the Appliance ...............................................................................17

Assembling the Anti-Rat Cover (Optional) .................................................17

OPERATION ........................................................................... 18

Using the Appliance ...................................................................................18

Sorting Laundry .........................................................................................19

Adding Cleaning Products .........................................................................20

Control Panel .............................................................................................22

Washing Programme .................................................................................23

Option Programme ....................................................................................25

Manual Washing ........................................................................................27

Special Functions ......................................................................................28

This manual may contain images or content different from the model you purchased.

This manual is subject to revision by the manufacturer.

SMART FUNCTIONS .............................................................29

Using LG SmartThinQ Application .............................................................29

Using Smart Diagnosis™ ..........................................................................32

MAINTENANCE ...................................................................... 33

Cleaning Your Washing Machine ...............................................................33

Cleaning the Water Inlet Filter ...................................................................34

Cleaning the Drain Pump Filter (Optional) .................................................34

Caution on Freezing During Winter ...........................................................35

Cleaning the Lint Filter (some models only) ..............................................35

TROUBLESHOOTING ...........................................................37

Diagnosing Problems ................................................................................37

Error Messages .........................................................................................41

WARRANTY ............................................................................ 43

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Children in the Household

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Installation

•Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

•This appliance should only be transported by two or more people holding the appliance securely.

•Tighten the drain hose to avoid separation.

•If the power cord is damaged or the hole of the socket outlet is loose, do not use the power cord and contact an authorized service centre.

•Make sure the plug is completely pushed into the outlet.

•Do not install the appliance in a damp and dusty place. Do not install or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, or rain or temperatures below freezing.

•Ventilation openings must not be obstructed by a carpet.

•Do not plug the appliance into multiple socket outlets or extension power cable.

•This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

•This appliance is equipped with a power cord having an equipment-grounding conductor and a grounding power plug. The power plug must be plugged into an appropriate socket outlet that is installed and grounded in accordance with all local codes and ordinances.

•Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.

•Do not modify the power cord provided with the appliance.

Operation

•Do not use a sharp object like drill or pin to press or separate an operation unit.

•Keep the area underneath and around the appliance free of combustible materials such as lint, paper, rags, chemicals, etc.

•Do not put animals, such as pets into the appliance.

•Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

•Use new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.

•Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5 years.

•Never reach into the appliance while it is operating. Wait until the drum has completely stopped.

•Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as waxes, wax removers, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, petrol, spot removers, turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can cause fire or explosion.

•In case of flood, disconnect the power plug and contact the LG Electronics customer information centre.

•Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, insecticide, air freshener, cosmetics, etc.) near the appliance.

•If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately.

•If the drain hose or inlet hose is frozen during winter, use it only after thawing.

•Keep all washing detergents, softener and bleach away from children.

•Do not touch the power plug or the appliance controls with wet hands.

•Do not bend the power cable excessively or place a heavy object on it.

•Do not put your hand, foot or anything under the washing machine while the washing machine is in operation.

•The hands shall not be inserted into running water-extracting drum.

•Make sure that drainage is working properly. If water is not drained properly, your floor may get flooded.

•If, during spinning, opening the door does not stop the drum within about 15 seconds, immediately discontinue operating the appliance and contact your dealer or LG Electronics service centre.

•Do not use a plug socket and wiring equipment for more than their rated capacity.

•When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.

•Wipe off dirt or dust on the contacts of the power plug.

•Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the HOT water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all Hot water taps and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the HOT water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

Maintenance

•Remove the power plug when you clean the appliance.

•Securely plug the power plug in the socket outlet after completely removing any moisture and dust.

•Do not spray water inside or outside the appliance to clean it.

•Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet.

•Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.

Disposal

•Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse.

•Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation.

•Remove the door before disposing of or discarding this appliance to avoid the danger of children or small animals getting trapped inside.

For One Valve Model

•Do not connect to hot water supply.

INSTALLATION

Parts

Door

Tempered Glass

Dispenser Drawer

Bleach Dispenser

Drum

Leveling Feet

Drain hose

Water Supply Hose

Lint Filter

• Appearance and specifications may change without notice to improve the quality of the product.

Accessories

or or or

2 water supply hoses

(Hot (Optional) + Cold)

Drain hose Anti-rat cover

(Optional)

Screw for Anti-rat cover

Tie strap (Optional)

(Optional)

Specifications

Model TH2519SSAK TH2519DSAK TH2517DSAV

Power Supply 220-240 V~, 50 Hz 220 V~, 60 Hz

Size 632 mm (W) x 670 mm (D) x 1020 mm (H)

Product Weight 50 kg

Allowable water pressure 30 - 800 kPa

Max. Watt 500 W

Max. capacity 19.0 kg 17.0 kg

• Appearance and specifications may change without notice to improve the quality of the product.

Installation Place Requirements

Location

10 cm2

Level floor : Allowable slope under the entire appliance is 1°.

Power outlet : Must be within 1.5 meters of either side of the location of the appliance.

• Do not overload the outlet with more than one appliance.

Additional Clearance : For the wall, 10 cm: rear/2 cm: right & left side.

• Do not place or store laundry products on top of the appliance at any time. These products may damage the finish or controls.

WARNING

• The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Positioning

• Install the appliance on a flat hard floor.

• Make sure that air circulation around the appliance is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the appliance.

• If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning stove, an insulation (85x60 cm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.

• Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

• Ensure that when the appliance is installed, it is easily accessible for an engineer in the event of a breakdown.

• If the appliance is delivered in winter and temperatures are below freezing, place the appliance at room temperature for a few hours before putting it into operation.

WARNING

• This equipment is not designed for maritime use or for use in mobile installations such as caravans, aircraft etc.

Electrical Connection

• Do not use an extension cord or double adapter.

• Always unplug the appliance and turn off the water supply after use.

• Connect the appliance to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Repairs to the appliance must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service centre.

Connecting the Supply Hose

• Before connecting the water supply hose to the water tap, check the hose type and then choose the correct instruction.

• The water supply hose supplied may vary from country to country. Make sure to connect the blue supply hose to the COLD water tap, and the orange supply hose to the HOT water tap.

• Water supply pressure must be between 30 kPa and 800 kPa (0.3 - 8.0 kgf / cm²).

• Do not overtighten the water supply hose.

• If the water supply pressure is more than 800 kPa, a decompression device should be installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Checking the Rubber Seal on the Supply Hose

Two rubber seals are supplied with the water supply hoses. They are used for preventing water leaks. Make sure the connection to taps is sufficiently tight.

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap with Thread

Screw the hose connector onto the water supply tap.

Connecting Screw-Type Hose to Tap Without Thread

Loose the four fixing screws.

connector

Fixing screw

Upper

Rubber seal

Hose connector Rubber seal

Hose connector

Rubber seal

Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

Push the adapter onto the end of the tap so

that the rubber seal forms a watertight connection. Tighten the four fixing screws.

Push the supply hose vertically upwards so

that the rubber seal within the hose can adhere completely to the tap and then tighten it by screwing it to the right.

Plate

Supply

hose

Connecting One Touch Type Hose to Tap Without Thread

Unscrew the adapter ring plate and loose

the four fixing screws.

Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

Push the adapter onto the end of the tap so

that the rubber seal forms a watertight connection. Tighten the four fixing screws and the adapter ring plate.

Pull the connector latch plate down, push

the supply hose onto the adapter, and release the connector latch plate. Make sure the adapter locks into place.

Latch plate

Ring plate

NOTE

• After connecting the supply hose to the water tap, turn on the water tap to flush out foreign substances (dirt, sand, sawdust, and etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.

Connecting Hose to Appliance

Attach the hot water line to the hot water inlet on the back of the washing machine. (Optional) Attach the cold water line to the cold water inlet on the back of the washing machine.

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the guide plate before inserting the tap into the adaptor.

Installing the Drain Hose

Before connecting the drain hose, check your drain hose model and choose the correct instruction.

Pump Model

• The drain hose should not be placed higher than 120 cm above the floor. Water in the washing machine may not drain or may drain slowly.

• Securing the drain hose correctly will protect the floor from damage due to water leakage.

• If the drain hose is too long, do not force it back into the washing machine. This will cause abnormal noise.

• When installing the drain hose to a sink, secure it tightly with string.

Laundry tub

Hose

retainer

0.9 - 1.2 m

Tie strap

0.9 - 1.2 m

NOTE

• The discharge height should be approximately

0.9 - 1.2 m from the floor.

Non-pump Model

Push the elbow hose toward the body of the

washing machine.

To change the direction of the hose, pull out

the elbow hose and change the direction. Repeat Step 1.

Positioning the Drain Hose

• The length of the drain hose should not exceed 3 m.

• Do not place the drain hose on a threshhold of 6 cm or more.

max. 3 m

max. 6 cm

• Make sure the drain hose is not kinked.

• The outlet of the drain hose should not be submerged in water.

• Make sure the drain hose is not kinked.

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as required (Do not insert pieces of wood etc. under the feet). Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level.

Diagonal Check

• When pushing down the edges of the appliance top plate diagonally, the appliance should not move up and down at all (Check both directions). If the appliance rocks when pushing the machine top plate diagonally, adjust the feet again.

NOTE

• Timber or suspended type flooring may contribute to excessive vibration and unbalance.

• If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.

• If the washing machine is installed on a uneven, weak or tilted floor causing excessive vibration, spin failure or “UE” error can occur. It must be placed on a firm and level floor to prevent spin failure.

Assembling the Anti-Rat Cover (Optional)

Insert the Anti-Rat cover to the assembling hole from the front or back of the washing machine.

Type 1

Type 2

OPERATION

Using the Appliance

Before the first wash, select a washing programme (Normal, add a half load of detergent), allow the washing machine to wash without clothing. This will remove residue and water from the drum that may have been left during manufacturing.

Sort laundry and load items.

• Sort laundry by fabric type, soil level, colour and load size as needed. Open the door and load items into the washing machine.

Add cleaning products and/or detergent and

softener.

• Add the proper amount of detergent to the detergent dispenser drawer. If desired, add bleach or fabric softener to the appropriate areas of the dispenser.

Choose the desired wash programme.

• Press the Program button repeatedly until the desired programme is selected.

Begin programme.

• Press the START/PAUSE button to begin the programme. The washing machine will agitate briefly without water to measure the weight of the load. If the START/ PAUSE button is not pressed within 60 minutes, the washing machine will shut off and all settings will be lost.

End of programme.

• When the programme is finished, a melody will sound. Immediately remove your clothing from the washing machine to reduce wrinkling.

Turn on the washing machine.

• Press the POWER button to turn on the washing machine.

NOTE

• The Auto Restart function allows the programme to restart by itself in case of power failure. lt does from the stage where it stopped.

Sorting Laundry

Look for a care label on your clothes.

• This will tell you about the fabric content of your garment and how it should be washed.

• Symbols on the care labels.

[Wash temperature]

[Normal machine wash]

[Permanent press]

[Delicate]

[Hand wash]

[Do not wash]

Sorting laundry.

• To get the best results, sort clothes into loads that can be washed with the same wash cycle.

• Different fabrics need to be washed at varying temperatures and spin speeds.

• Always sort dark colours from pale colours and whites. Wash separately as dye and lint transfer can occur causing discolouration of white and pale garments. If possible, do not wash heavily soiled items with lightly soiled ones.

− Soil (Heavy, Normal, Light) : Separate clothes according to amount of soil.

− Colour (White, Lights, Darks): Separate white fabrics from coloured fabrics.

− Lint (Lint producers, Collectors): Wash lint producers and lint collectors separately.

Caring before loading.

• Combine large and small items in a load. Load large items first.

• Large items should not be more than half the total wash load. Do not wash single items. This may cause an unbalanced load. Add one or two similar items.

• Check all pockets to make sure that they are empty. Items such as nails, hair clips, matches, pens, coins and keys can damage both your washing machine and your clothes.

• Close zippers, hooks and strings to make sure that these items don’t snag on other clothes.

• Pre-treat dirt and stains by brushing a small amount of detergent dissolved water onto stains to help lift dirt.

CAUTION

• Do not wash or spin any item labeled or known to be water-proof or water-resistant, even if the product care label on the item permits machine washing. Failure to follow these instructions could result in severe damage to your laundry, your washing machine and/or property damage as a result of abnormal vibration of the washing machine.

− Examples of water-proof or water-resistant items include certain mattress pads, mattress covers, rain gear, camping gear, skiing apparel, outdoor gear and similar items.

Adding Cleaning Products

Detergent Dosage

• Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and washing temperature.

• If too much detergent is used, too many suds can occur and this will result in poor washing results or cause heavy load to the motor.

• If you wish to use liquid detergent follow the guidelines provided by the detergent manufacturer.

• You can pour liquid detergent directly into the main detergent drawer if you are starting the cycle immediately.

• Do not use liquid detergent if you are using Time delay, or if you have selected Pre Wash, as the liquid may harden.

• If too many suds occur, reduce the detergent amount.

• Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid oversudsing.

• Refer to the label of the clothes, before choosing the detergent and water temperature.

• When using the washing machine, use designated detergent for each type of clothing only:

− General powdered detergents for all types of fabric

− Powdered detergents for delicate fabric

− Liquid detergents for all types of fabric or designated detergents only for wool

• For better washing performance and whitening, use detergent with the general powdered bleach.

• Detergent is flushed from the dispenser at the beginning of the cycle.

• Dilute liquid detergent with water and pour into the drum, start the cycle.

• Using liquid detergent without diluting, or leaving laundry for a long time after pouring diluted liquid detergent into the drum might cause damage, bleaching or discoloration of cloth.

NOTE

• Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or odour.

• Full load : According to manufacturer’s recommendation.

• Part load : 3/4 of the normal amount

• Minimum load : 1/2 of full load

Adding Detergent

• Follow the detergent package directions. Using too little detergent is a common cause of laundry problems. Use more detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.

• Soap flakes or granulated soap powders should not be used in your washing machine. When washing woolens, remember to use detergent suitable for washing woolens.

NOTE

• Too much detergent, bleach or softener may cause an overflow.

Adding Fabric Softener

• Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener, which may stain clothes. Close the dispenser drawer slowly.

• Do not leave the fabric softener in the detergent drawer for more than 2 days (Fabric softener may harden).

• Softener will automatically be added during the last rinse cycle.

• Do not open the drawer when water is being supplied.

• Solvents (benzene, etc.) should not be used.

NOTE

• Do not pour fabric softener directly on the clothes.

Adding Liquid Bleach

• Check clothing care label for special instructions and separate the laundry to be bleached.

• Dilute liquid chlorine bleach.

• Measure the recommended amount of liquid bleach carefully following instructions on the bottle.

• Before starting the washing machine, pour the measured amount of bleach directly into the bleach dispenser. Avoid splashing or overfilling. Powdered bleach should be mixed with water before being poured into the dispenser.

NOTE

• Never pour undiluted liquid bleach directly onto clothes or into the wash basket. This may cause change of color or damage the laundry.

• Do not pour powdered bleach into the bleach dispenser.

Control Panel

For Non-Steam Models

POWER Button

• Press the POWER button to turn the washing machine on.

• The appliance will automatically turn off once a certain time has passed after the wash has completed.

START/PAUSE Button

• Press the START/PAUSE button to start the wash cycle or pause the wash cycle.

• If a temporary stop of the wash cycle is needed, press the START/PAUSE button.

NOTE

• For customer safety, the door will be locked automatically during operation. If there are additional laundry to put in, press START/PAUSE to unlock.

• Press START/PAUSE button again to resume operation.

Program Button

• Programmes are available according to laundry type.

• Lamp will light up to indicate the selected programme.

Option Button

• Press buttons to select the desired options.

Display

• The display shows the settings, estimated time remaining, options, and status messages. When the product is turned on, the default settings in the display will illuminate.

• The process lamp will remain prior to it beginning. The process lamp will blink during that process, and the lamp will then turn off when that process has completed.

Washing Programme

Wash cycles are designed for the best wash performance for each type of load. Select the programme that best matches the load contents for maximum wash performance and fabric care. Press the Program button to select the desired programme. When you select a wash programme, the light for the corresponding wash programme will turn on.

Normal

Use this programme to wash normal loads. The built-in sensor detects the size of the load, calculating wash, rinse and, spin settings accordingly.

• If water or wet laundry is already in the drum before starting, the water level will be increased.

• For lightweight bulky loads, the water level may be too low and should be increased manually.

Smart Rinse

Use this programme to increase rinsing performance. This would include underwear and baby clothes. If someone has sensitive skin or skin trouble, use this programme.

Quick Wash

Use this programme to wash lightly soiled clothes for a short time. This programme's recommended laundry amount is under 3 kg.

Towels

Use this programme to wash towels with a hand wash mark on it more effectively.

NOTE

• Please wash separately from other clothing.

Delicates

Use this programme to wash delicate fabrics such as lingerie and woolens. Before washing, check the care label for the washing instructions.

• This programme uses a slow spin to extract water from laundry, so the laundry has more moisture than normal.

• Only cold water will be used for this programme as hot water may damage laundry.

NOTE

• Hang or lay flat to dry your delicates.

Pre Wash + Normal

Use this programme to pretreat immediate stain without handwash. It is necessary for clothes which could smell bad without prompt laundry.

Duvet

Use this programme to wash a blanket or bedclothes with hand wash sign.

• Cashmere bedclothes, acrylic blanket, mixed spinning blanket, woolen blanket, infilling (polyester 101), and bed sheet might be damaged by floating. Please purchase a separate laundry net to wash.

• Separate bed clothes from general clothes. It might cause laundry to askew and results in abnormal washing.

• Spin dry might take longer to spread out laundry if bedclothes are lumped to a side.

• Never wash an electric blanket and a carpet. It cause damage to a laundry machine and the laundry.

• Please use a laundry net to soak and sink bedclothes that are easily inflated. It might cause damage to laundry and machine parts if inflated.

• Regardless of its size, we recommend to wash one by one. If two bedclothes with different materials are washed at a time, it might cause abnormal spin dry due to imbalance.

School Care

Use this programme to wash school uniform.

• This programme has a longer washing time than the Normal programme.

• To reduce noise in spinning, this programme uses a slow spin to extract water from the clothes, so the clothes will have more moisture than normal.

NOTE

• How to put a blanket into the drum.

Below this line

Option Programme

Water Level

• Press the Water Level button to adjust water level.

• It can be changed during operation.

• This machine detects the quantity of laundry automatically, then sets Water Level. It may be necessary to increase the water level manually when washing bulky light weight clothes.

• When you select a wash programme, the Water Level will be shown on the control panel.

• When Water Level is automatically detected, it may differ depending on the quantity of laundry even though the same Water Level is indicated on the control panel.

Wash

• Press the Wash button to change laundry time.

• Adjusting the wash level setting will modify the cycle times and/or wash actions. Press the Wash button until the desired wash level is selected.

Rinse

• Press the Rinse button to change the number of rinses.

Intensive Rinse

• Use Intensive Rinse to remove detergents more effectively.

• Press the Rinse button to start Intensive Rinse.

time time times times times times times times

times

timestime

Spin

• Press the Spin button to change spin strength.

• Press START/PAUSE button to indicate remaining time.

To use the Air Dry function

• When you select Air Dry, you can reduce the drying time by minimizing the moisture in the laundry.

• Press the Spin button for 3 seconds to select and press the POWER button to deselect.

NOTE

• Always keep the laundry amount to 2 kg or less and make sure to spread it out evenly.

• Select 60 minutes for cotton laundry and 120 minutes for synthetic fiber laundry for effective moisture removal.

Strong Wave

• Press the Strong Wave button to control water wave.

• Initially set at “medium” but will not be indicated. To control wave power, press the

Strong Wave button.

Time Delay

• You can set a time delay so that the washing machine will start automatically and finish after a specified time interval.

Press the POWER button.

Select a washing programme.

Press the Time Delay button to set the

required Delay time.

Press the START/PAUSE button.

NOTE

• The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors.

• Reservation can be made up to 18 hours by 1-hour interval up to 3 - 12 hours and 2-hour interval for 12 - 18 hours.The Time Delay cannot be set for less than 3 hours.

• To cancel the Time Delay function, press Time Delay button repeatedly until the reservation is canceled or press the POWER button to turn off and on power.

Buzzer

Press the POWER button.

Select a washing programme.

Press the Buzzer button to set the Buzzer

function.

Press the START/PAUSE button.

NOTE

• Once the Buzzer function is set, the setting is memorized even after the power is turned off.

• If you want to turn the Buzzer off, simply repeat this process.

Turbo Wash™

• Press the Turbo Wash™ button to save time and energy by jet spray technology.

Soak

• Soak can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt and grime.

• When the soak is activated, the illuminates.

• To activate the Soak option, press and hold the Turbo Wash™ button for 3 seconds.

• To change the soak time on the display or deactivate the Soak option, press the Turbo Wash™ button while the Soak option is activated.

icon

NOTE

• While the Turbo Wash option is activated, the Soak option can not be set even if the Turbo

Wash™ button is pressed for 3 seconds.

Tub Dry

• Press the Tub Dry button to dry the empty tub after a wash.

Manual Washing

When you need a Rinse/Spin, Spin, Rinse, or Wash cycle only, these can be set manually.

Rinse, Spin Spin only Rinse only Wash only

Press the Rinse

button.

Rinse and Spin are

automatically

selected.

Press the Rinse and

Spin buttons to adjust

the number of rinses

and spin times.

Press the POWER button.

Press the Spin

button.

Press the Spin button

to adjust spin

duration.

Press the START/PAUSE button.

Press the Rinse

button.

Press the Spin button

until the spin function

is canceled.

Press the Rinse

button to adjust the

number of rinses.

Press the Wash

button.

Rinse and Spin are

automatically

selected.

Press the Rinse and

Spin buttons until the

rinse and spin

functions are

canceled.

NOTE

• When a Wash, Wash/Rinse or Rinse only option is selected, the water will not be drained out after the wash is completed. If you wish to drain the water, select Spin only.

• If Rinse only is selected, the process will start from the inlet water being supplied.

• If you do not choose anything for Water Level, the water level is set automatically.

Special Functions

Child Lock

Use this option to disable the controls. This feature can prevent children from changing programmes or operating the appliance.

Locking the Control Panel

Press and hold the Water Level and Spin

buttons simultaneously for 3 seconds.

' ' and the remaining time are alternatively

shown on the display while they are locked.

• When the Child Lock is set, all buttons are locked except the POWER button.

NOTE

• Turning off the power will not reset the child lock function. You must deactivate child lock before you can access any other functions.

Unlocking the Control Panel

Press and hold the Water Level and Spin buttons simultaneously for 3 seconds.

• A beeper will sound and the remaining time for the current programme will reappear on the display.

SMART FUNCTIONS

Using LG SmartThinQ Application

Things to check before using LG SmartThinQ

• For appliances with the or logo

Check the distance between the appliance

and the wireless router (Wi-Fi network).

• If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.

Turn off the Mobile data or Cellular Data

on your smartphone.

• For iPhones, turn data off by going to Settings → Cellular → Cellular Data.

Connect your smartphone to the wireless

router.

NOTE

• To verify the Wi-Fi connection, check that Wi-Fi icon on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.

• LG SmartThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.

• If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may be interrupted because of the home network environment.

• The network connection may not work properly depending on the Internet service provider.

• The surrounding wireless environment can make the wireless network service run slowly.

• The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.

• If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.

• The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)

• Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.

• If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again.

Installing LG SmartThinQ

Search for the LG SmartThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application.

Wi-Fi Function

• For appliances with the or logo

Communicate with the appliance from a smart phone using the convenient smart features.

Washer Cycle (Remote Start, Download Cycle)

Set or download any preferred cycle and operate by remote control.

Tub Clean Coach

This function shows how many cycles remain before It is time to run the Tub Clean cycle.

Energy Monitoring

Check the energy consupmtion of the recently used cycles and monthly average.

Smart Diagnosis™

This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.

Push Alert

Turn on the Push Alerts to receive appliance status notifications. The notifications are triggered even if the LG SmartThinQ application is off.

NOTE

• If you change your wireless router, Internet service provider, or password, delete the registered appliance from the LG SmartThinQ application and register it again.

• The application is subject to change for appliance improvement purposes without notice to users.

• Functions may vary by model.

Settings

Various functions are available.

Using Washer Cycle

Remote Start

Use a smart phone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle.

To Use Remote Start:

Press the POWER button.

Put the laundry in drum.

Press and hold Remote Start button for 3

seconds to enable Remote Start function.

Start a cycle from the LG SmartThinQ

application on your smart phone.

NOTE

• Once the Remote Start mode is enabled, you can start a cycle from the LG SmartThinQ smartphone application. If the cycle is not started, the machine will wait to start the cycle until it is turned off remotely from the application or the Remote Start mode is disabled.

• When Remote Start is turned on, the door is automatically locked.

To Disable Remote Start:

When the Remote Start is activated, press and hold Remote Start button for 3 seconds.

Download Cycle

Download new and special cycles that are not included in the basic cycles on the appliance.

Appliances that have been successfully registered can download a variety of specialty cycles specific to the appliance.

Only one cycle can be stored on the appliance at a time.

Once cycle download is completed in the appliance, the product keeps the downloaded cycle until a new cycle is downloaded.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Smart Diagnosis™ Using a Smart Phone

• For appliances with the or logo

Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails.

Smart Diagnosis™ can not be activated unless the appliance is connected to power. If the appliance is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™.

Using Smart Diagnosis™

Smart Diagnosis™ Through the Customer Information Centre

Use this function if you need an accurate diagnosis by an LG Electronics customer information center when the appliance malfunctions or fails. Use this function only to contact the service representative, not during normal operation.

Press the POWER button to turn on the

washing machine. Do not press any other buttons.

When instructed to do so by the call centre,

place the mouthpiece of your phone close to the Smart Diagnosis™ icon.

Max.

10 mm

Press and hold the Tub Dry button for 3

seconds.

Once the countdown is over and the tones

have stopped, resume your conversation with the call centre agent, who will then be able to assist you using the information transmitted for analysis.

NOTE

• The Smart Diagnosis™ function depends on the local call quality.

• The communication performance will improve and you can receive better service if you use the home phone.

• If the Smart Diagnosis™ data transfer is poor due to poor call quality, you may not receive the best Smart Diagnosis™ service.

Keep the phone in place until the tone

transmission has finished. Time remaining for data transfer is displayed.

• For best results, do not move the phone while the tones are being transmitted.

• If the call centre agent is not able to get an accurate recording of the data, you may be asked to try again.

MAINTENANCE

WARNING

• Unplug the washing machine before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washing machine. They may damage the finish.

Cleaning Your Washing Machine

Care After Wash

• If you always use COLD water, we recommend that a WARM or HOT wash be used at regular intervals e.g. every 5th wash should be at least a WARM one.

• Turn off taps to prevent the chance of flooding should a hose burst.

• Always unplug the power cord after use.

• After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture.

• Leave the door open to dry the drum interior.

• Wipe the body of the washing machine with a dry cloth to remove any moisture.

Cleaning the Exterior

Proper care of your washing machine can extend its life.

Exterior:

• Immediately wipe off any spills.

• Wipe with a damp cloth.

• Do not press the surface or the display with sharp objects.

Dispenser Drawer:

Detergent and fabric softener may build up in the dispenser drawer. Remove the drawer and inserts and check for buildup once or twice a month.

Tub Clean

Tub Clean is a special cycle to clean the inside of the washing machine. Perform this cycle regularly.

Remove any clothing or items from the

washing machine.

Open the dispenser drawer and add

antilimescale (e.g. Calgon) to the main wash compartment.

Close the dispenser drawer slowly. Close

the door.

Press the Program button to select Tub

clean.

Press the START/PAUSE button to start.

After the cycle is complete, leave the door

open to allow the washing machine door opening, flexible gasket and door glass to dry.

CAUTION

• Children should be supervised if leaving the washing machine's door open.

NOTE

• Do not add any detergent to the detergent dispenser drawer. Excessive suds may generate and leak from the washing machine.

Quick Tub Clean (Optional)

Use this programme to clean the inner and outer tubs quickly. It is recommended to use this programme before washing baby clothes.

Cleaning the Water Inlet Filter

• Turn off the supply taps to the machine if the washing machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity.

• ’

' error message will be displayed on the control panel when water is not entering the detergent drawer.

• If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it occasionally.

Turn off the water tap and unscrew the

water supply hose.

Clean the filter using a hard bristle brush.

Cleaning the Drain Pump Filter (Optional)

• The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your washing machine.

• Empty all the water from the tub by running a spin only cycle for a few minutes then unplug the machine off from the power outlet socket.

Turn the cap on the rear of the machine

counter-clockwise and pull it out.

Remove any foreign objects and fluff inside

pump casing and from the filter.

Replace the cap. Insert the filter along the

guide ribs inside the pump casing. Filter must face the guide ribs inside pump casing and securely turn the cap clockwise.

CAUTION

• Be careful when draining, as any residual water may be hot.

Caution on Freezing During Winter

• When frozen, the product does not operate normally. Make sure to install the product where it will not freeze during winter.

• In case the product must be installed outside on a porch or in other outdoor conditions, make sure to check the following.

How to Keep the Product from Freezing

• After closing the tap, disconnect the cold supply hose from the tap, and remove water while keeping the hose facing downwards.

Supply hose

How to Handle Freezing

• When water supply problems occur, take the following measures.

− Turn off the tap, and thaw out the tap and both connection areas of supply hose of the product using a hot water cloth.

− Take out supply hose and immerse in warm water below 50–60 °C.

50‒60 °C

Cleaning the Lint Filter (some models only)

The filter is an important part for an efficient washing performance result, so it needs special care from you. It is recommended that the filter be cleaned regularly.

CAUTION

• Clean the lint filter after at least 2-3 washes.

• Do not drop the filter on the floor.

• Be careful not to have your fingernails caught in the filter when you handle the filter.

• The lint filter should be back into its original position after being washed to avoid damage to your laundry items. Do not operate the machine with the Lint filters removed.

• If the mesh hole of the lint filter is clogged, foreign matter in the laundry may not be filtered.

• Do not leave iron objects (such as clothes pins, hairpins, etc.) in the lint filter as they promote rust.

Type 1

Push down on the release tab on the top of

the filter cover and pull forward.

Open the lid and remove the lint.

Wash the filter with a soft brush.

Type 2

Push in on both sides of the release tabs of

the filter cover and the filter cap forward.

Open the lid, remove the lint and then wash

out.

Close the lid and then insert the lower part

of the filter into the housing guide and press the top part into position until you hear a click sound.

Close the lid and then insert the lower part

of the filter into the wash drum and press down then press the top part into position until you hear a click sound.

TROUBLESHOOTING

The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service:

Diagnosing Problems

Symptoms Reason Solution

Rattling and clanking noise

Thumping sound

Vibrating noise

Poor stain removal

Foreign objects, such as keys, coins, or safety pins may be in drum.

Heavy wash loads may produce a thumping sound. This is usually normal.

Wash load may be out of balance.

Packaging materials were not removed.

Wash load may be unevenly distributed in the drum.

Not all leveling feet are resting firmly and evenly on the floor.

Floor not rigid enough.

Proper options not selected.

Previously set stains.

• Stop washing machine, check drum for foreign objects. If noise continues after washing machine is restarted, call for service.

• If sound continues, washing machine is probably out of balance. Stop and redistribute wash load.

• Pause the cycle and redistribute the load after the door unlocks.

• Remove packing materials

• Pause the cycle and redistribute the load after the door unlocks.

• See Leveling the Appliance in the Installation section.

• Make sure that the floor is solid and does

not flex. See the Installation Place Requirements section.

• Heavier soils and tougher stains may

require extra cleaning power. Select the Soak feature to boost the cleaning power of the selected cycle.

• Articles that have previously been

washed may have stains that have been set. These stains may be difficult to remove and may require hand washing or pretreating to aid in stain removal.

Symptoms Reason Solution

• Dispenser compartment is overfilled causing bleach or softener to dispense immediately. ALWAYS measure bleach to prevent overfilling.

• Close the dispenser drawer slowly.

• Always use the dispensers to ensure that laundry products are properly dispensed at the right time in the cycle.

• Always wash dark colours separately from light colours and whites to prevent discoloration.

• Never wash heavily soiled items with lightly soiled items.

• Check hoses for leaks, cracks and splits.

• Tighten hose connections.

• The washing machine pumps out water very rapidly. Check for water backing up out of the drain pipe during drain. If water is seen coming out of the drain, check for proper drain hose installation and check for restrictions in the drain. Contact a plumber to repair drain pipe.

• Tie drain hose to supply hose or standpipe to prevent it from coming out during drain. For smaller drain pipes, insert the drain hose into the pipe as far as the drain hose flange. For larger drain pipes, insert the drain hose into the pipe

2.5 - 5 cm past the flange.

• Stop the washing machine and check the

load. Make sure the load does not crest above the top edge of the drum.

Staining

Water leaking

Bleach or softener dispensed too soon.

Bleach or softener was added directly to the wash load in the drum.

Clothes were not properly sorted.

Supply hose connection is loose at tap or washing machine.

House drain pipes are clogged.

Drain hose has come out of drain or is not inserted far enough.

A large item such as a pillow or blanket is above the top of the drum.

Symptoms Reason Solution

Washing machine will not operate

Control panel has powered off due to inactivity.

Washing machine is unplugged.

Water supply is turned off. • Turn both hot and cold taps fully on.

Controls are not set properly.

Door is open.

Circuit breaker/fuse is tripped/blown.

Control needs to be reset.

Start/Pause was not pressed after a cycle was set.

Extremely low water pressure.

Washing machine is too cold.

Washing machine is heating the water or making steam.

• This is normal. Press the POWER button to turn the washing machine on.

• Make sure cord is plugged securely into a working outlet.

• Make sure the cycle was set correctly, close the door and press the START/ PAUSE button.

• Close the door and make sure that nothing is caught under the door preventing it from closing completely.

• Check house circuit breakers/fuses. Replace fuses or reset breaker. The washing machine should be on a dedicated branch circuit. The washing machine will resume the cycle where it stopped once power is restored.

• Press the POWER button, then reselect

the desired cycle and press the START/ PAUSE button.

• Press the POWER button then reselect

the desired cycle and press the START/ PAUSE button. The washing machine will shut off if theSTART/PAUSE button is not pressed within 60 minutes.

• Check another tap in the house to make

sure that household water pressure is adequate.

• If the washing machine has been

exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing the POWER button.

• The washing machine drum may stop

operating temporarily during certain cycles, while water is safely heated to a set temperature.

Symptoms Reason Solution

• Make sure the inlet filters on the fill valves are not clogged.

• Check that supply hoses are not kinked or clogged.

• Make sure that both hot and cold water taps are turned on all the way.

• Check supply hose connections.

• Make sure that the drain hose is no higher than 1.2 m above the bottom of the washing machine.

• Always remove items from the washing

machine as soon as the cycle is complete.

• The washing machine can be fully

loaded, but the drum should not be tightly packed with items. The door of the washing machine should close easily.

• Hot water rinse can set wrinkles in

garments. Check the supply hose connections.

• Follow the guidelines provided by the

detergent manufacturer.

• Run the Tub clean cycle regularly.

• Add more items to allow the washing

machine to balance the loads.

• Always try to wash articles of somewhat

similar weight to allow the washing machine to evenly distribute the weight of the load for spinning.

• Manually redistribute the load if articles

have become tangled.

Washing machine not filling properly

Washing machine will not drain water

Wrinkling

Incomplete or no dispensing of detergent

Musty or mildewy odor in washing machine

Cycle time is longer than usual

Filter clogged.

Supply hoses may be kinked.

Insufficient water supply.

Hot and cold supply hoses are reversed.

Kinked drain hose. • Ensure that the drain hose is not kinked.

Drain located higher than 1.2 m above the floor.

Washing machine not unloaded promptly.

Washing machine overloaded.

Hot and cold water supply hoses are reversed.

Too much detergent used.

Inside of drum was not cleaned properly.

The load is too small.

Heavy articles are mixed with lighter items.

The load is out of balance.

Error Messages

Symptoms Reason Solution

The door is not closed properly.

Door lock switch error.

Special Drain Feature.

Water supply taps are not fully open.

Water line hoses are kinked, pinched, or crushed.

Water inlet filters are clogged. • Clean the inlet filters. Water supply pressure to tap or

house is too low. Water supply connected with

leaklimiting hoses.

Foreign objects, such as coins, pins, clips, etc., caught between the wash plate and the inner basket.

Drain hose is kinked, pinched, or clogged.

Drain discharge is more than 1.2 m above bottom of washing machine.

• Close the door completely. If the error code is not released, call for service.

• Check nothing is caught under the door, including shipping materials or lothing.

• Close the door completely. If the error code is not released, call for service.

• If the washing machine is paused during a cycle for a few minutes, the cycle will be cancelled and any water remaining in the drum will be drained.

• Fully open tap.

• Straighten the hose(s).

• Contact a plumber to have the water lines repaired.

• Do not use leak limiting hoses.

• Turn off the washing machine and then press the POWER button. Press the Spin button without selecting a cycle to drain and spin the load. When the spin is complete, remove the clothes and then find and remove any objects caught in the wash plate.

• Straighten the hose(s).

• Adjust or repair drain. Maximum drain height is 1.2 m.

Symptoms Reason Solution

UE rebalancing operation is not successful.

The load is too small.

Heavy articles are mixed with lighter items.

The load is out of balance.

Control error.

Water level is too high due to a faulty water valve.

The water level sensor is not working correctly.

A motor error has occurred.

Clutch error.

Tub clean Alarm. • Run the Tub Clean programme.

Sensor for cloth-sensing is defective.

Motor’s revolution is too low. Contact-point of Connector is

defective. CL is not an error. This prevents

children from changing cycles or operating the appliance.

• The automatic attempt to rebalance the load was not successful. The cycle has been paused to allow the load to be manually adjusted.

• Add more items to allow the washing machine to balance the loads.

• Wash articles of somewhat similar weight.

• Manually redistribute the load if articles have become tangled.

• Unplug the washing machine and wait 60 seconds. Reconnect power and try again. If the error code is not released, call for service.

• Close the water taps, unplug the washing machine, and call for service.

• Allow the washing machine to stand for 30 minutes and then restart the cycle. If the error code is not released, call for service.

• Unplug the washing machine and call for service.

• Manually redistribute the load if articles have become tangled.

• Unplug the washing machine and wait 60 seconds. Reconnect power and try again.

• To deactivate, press the Water Level and Spin buttons simultaneously for 3 seconds.

WARRANTY

THIS LIMITED WARRANTY DOES NOT COVER:

• Service trips to deliver, pick up, or install or repair the product; instruction to the customer on operation of the product; repair or replacement of fuses or correction of wiring or plumbing, or correction of unauthorized repairs/installation.

• Failure of the product to perform during power failures and interruptions or inadequate electrical service.

• Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air.

• Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined in the Product’s owner’s manual.

• Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God.

• Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the intended purpose, or any water leakage where the unit was not properly installed.

• Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or industrial use, or use of accessories, components, or consumable cleaning products that are not approved by LG.

• Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of your product, unless such damage results from defects in materials or workmanship and is reported within one (1) week of delivery.

• Damage or missing items to any display, open box, discounted, or refurbished Product.

• Products with original serial numbers that have been removed, altered, or cannot be readily determined. Model and Serial numbers, along with original retail sales receipt, are required for warranty validation.

• Increases in utility costs and additional utility expenses.

• Repairs when your Product is used in other than normal and usual household use (e.g. commercial use, in offices and recreational facilities) or contrary to the instructions outlined in the Product’s owner’s manual.

• Costs associated with removal of your Product from your home for repairs.

• The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with published installation instructions, including LG’s owner’s and installation manuals.

• Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of parts not approved or specified by LG.

Memo

LG TH2517DSAV, TH2519SSAK Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual