enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
CAUTION: Only use the AC adapter supplied with
this device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage to
the device and void your warranty.
Symbols
Refers to alternating current (AC).
~
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Getting Started3
1
Getting Started
Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
6 Introduction
7 Front panel
8 Rear panel
9 Remote control
12 Installing the sound bar
13 Mounting the main unit on a wall
2 Connecting
15 Organizing cables (Optional)
15 Connecting the AC Adapter
16 Wireless subwoofer connection
18 Connecting to your TV
18 – Using an OPTICAL cable
18 – LG Sound Sync
20 Optional equipment connection
20 – OPTICAL IN connection
Table of Contents5
3 Operating
21 Operations
21 – Using your TV remote control
22 – AUTO POWER On/Off
23 – Auto function change
24 Using a Bluetooth Wireless Technology
24 – About Bluetooth
24 – Bluetooth profiles
24 – Listening to Music of a Bluetooth Device
26 – Controls connected Bluetooth device
26 – Bluetooth connection lock (BT LOCK)
26 Using BLUETOOTH App
26 – Install “Music Flow Bluetooth” App onto
Your BLUETOOTH Device
27 – Activate BLUETOOTH with “Music Flow
Bluetooth” App
4 Troubleshooting
28 Troubleshooting
28 – General
29 – NOTES to use wireless
5 Appendix
30 Trademarks and licenses
31 Specifications
33 Handling the Speaker
1
2
3
4
5
Getting Started6
Introduction
Symbol used in this manual
1
Getting Started
Note
,
Indicates special notes and operating features.
Caution
>
Indicates cautions for preventing possible damages
from abuse.
Front panel
Display Window
- Display window will be darkened automatically if there is no key input for 15 seconds.
A
When you press any button, the display window will brighten.
Remote sensor
B
(Standby)
1
- Switches the unit ON or OFF.
F (Function)
- Select the function and input source by pressing F repeatedly.
Input source / FunctionDisplay
C
Optical
LG Sound Sync (Wired)
BluetoothBT
LG Sound Sync (Wireless)LG TV
OPT
Getting Started7
1
Getting Started
(Volume)
o/p
- Adjusts volume level.
This unit will turn itself off to save electric consumption when the main unit is not connected to an external
,
device and is not used for 15 minutes.
Rear panel
1
Getting Started
A
B
C
Getting Started8
DC IN
- Connect to the AC adapter.
OPTICAL IN
- Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.
USB (Service only)
- S/W download connector.
Remote control
Getting Started9
Replacement of Battery
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
(Standby)
1
a
- Switches the unit ON or OFF.
VOL (Volume) o/
b
- Adjusts speaker volume.
(Skip)
C/V
c
- Press C or V to go to next or previous le.
(Play/Pause)
N
- Starts playback. / Pauses playback.
yBT (Bluetooth) connection Lock: It allows you to connect a Bluetooth device only on Bluetooth
d
and LG TV functions. (Page 26)
To turn on or off the Bluetooth connection lock, press and hold N for about 3 seconds and press it
again in BT (Bluetooth) function.
p
1
Getting Started
Getting Started10
SOUND EFFECT
- Selects a sound effect mode by using SOUND EFFECT.
1
Getting Started
e
f
On DisplayDescription
ASC (Adaptive Sound Control)
BASS BLAST or BASS BLAST+Reinforces the bass and powerful sound.
STANDARDYou can enjoy optimized sound.
CINEMAYou can enjoy more immersive and cinematic surround sound.
yTV remote: It allows you to control the volume of this unit by your TV remote control even by other
company’s product. (Page 21)
To turn on or off the TV Remote function, press and hold SOUND EFFECT for about 3 seconds and
press it again.
Supported TV brands
,
LGPanasonicPhilipsSamsungSharpSonyToshibaVizio
(Sound tuning)
- Adjusts sound level of each speaker.
Select the speaker you want to adjust by using
SpeakerDisplayRange
Sub WooferWF-15 ~ 6
TrebleTRE-5 ~ 5
BassBAS-5 ~ 5
Analyzes the property of the input sound and provides the
sound optimized for the content in real time.
and adjust the sound level by using VOL o/p.
Getting Started 11
F (Function)
g
- Select the function and input source by pressing F repeatedly.
(Mute)
[
h
- Press [ to mute your unit. To cancel it, press [ again.
(Information)
J
- You can display various information of the input source by pressing J.
- OPT (Optical): Audio format
i
j
k
- BT (Bluetooth): Connected Bluetooth device name
yAuto Power ON/OFF: It allows the unit to turn on and off automatically by input signals: Optical, LG
TV or Bluetooth (Page 22)
To turn on or off AUTO POWER function, press and hold J for about 3 seconds and press it again.
*
- This button is not available.
(Night time)
8
- It is useful when you want to watch movies at low volume late at night. It makes to reduce the
sound intensity and improve neness and softness.
Press 8 to activate Night time mode. To cancel it, press 8 again.
1
Getting Started
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.