LG SK8Y User Manual

SIMPLE MANUAL

MFL70460103

LG Wi-Fi Sound Bar

ENGLISH

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

yReorient or relocate the receiving antenna. yIncrease the separation between the equipment and

the receiver.

yConnect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

yConsult the dealer or an experienced radio/TV

technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired

operation. Any changes or modications in construction

of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the

antenna and your body. Users must follow the specic

operating instructions for satisfying RF exposure compliance.

FCC Radio Frequency Interference Requirements:

High power radars are allocated as primary users of the

5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

Responsible Party:

LG Electronics USA, Inc. 1000 Sylvan Ave Englewood Cliffs, NJ 07632 Tel: 1-800-243-0000

This equipment

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

MODEL

LG Customer Information Center

1-800-243-0000 USA, Consumer 1-888-865-3026 USA, Commercial

www.lg.com

SK8Y

www.lg.com

SK8Y.DUSALLK_SIMPLE (Sheet)_ENG_MFL70460103.indd 1,4 2018-01-08  3:42:15

Printed in China

Front Panel

The buttons are located on the side.

LED indicator

1 (Standby) ··········Switches the unit ON or OFF. F (Function) ························Selects function p/o (Volume)·····················Adjusts volume /···························Selects Wi-Fi function.

LED indicator

• White (Blinking): Waiting for network connection on Wi-Fi function.

• White (Staying on): Network connection is completed on Wi-Fi function or the other functions are selected.

• White (Dimmed): Standby mode with network connection.

• Red (Staying on): Standby mode without network connection.

: Shows connection status.

Rear Panel

DC IN································AC adapter input OPTICAL IN ············Connect to an optical device. PORTABLE IN···············Connect portable device.

USB (Service only) ········S/W download connector.

LAN ································Connect to router. HDMI OUT (TV ARC)··············· Connect to a TV. HDMI IN ··········Connect to device with HDMI OUT.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar. c The sound bar and wireless subwoofer will be

automatically connected. The subwoofer's green LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.

a Press Pairing button on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing button.)

b Turn on the sound bar. c Pairing is completed.

• The green LED on the rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.

1 m (3.3 ft)

TV Connection

Connect the sound bar and TV using Optical ( ) or HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

HDMI (ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

• HDMI connection is unavailable if your TV does not support HDMI ARC.

• If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.

Additional Device Connection

a Connect to the external device like as follow.

(Set-top Box, Player etc.)

b Set the input source by pressing F on the remote

control or unit repeatedly.

Network Connection

a Check network condition. A router connected to

network should be installed.

b Connect your smart device to your home

network.

c Connect the sound bar to the power supply.

All devices should be connected to same router.

Download LG Wi-Fi Speaker Application

Download “LG Wi-Fi Speaker” on the App Store or Google Play Store.

LG Wi-Fi Speaker

Launch LG Wi-Fi Speaker App

Follow the steps for wired or wireless connection displayed on the screen.

Remote control

Replacement of Battery

SOUND EFFECT: Selects a sound effect mode.

: Adjusts sound level of each speaker. AV SYNC: Synchronizes the audio and video. INFO: Displays the input source information. AUTO VOL: Adjusts too loud or low output volume

level appropriately. AUTO POWER: Automatically turns on by an input

source.

Additional Information

Specication

Power requirement

Power consumption

AC adapter

Dimensions (W x H x D)

Amplier (Total RMS Output power)

Design and specications are subject to change

without notice.

Rear Speakers Ready

Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)

Refer to the main label.

• Model: DA-38A25

• Manufacturer

• Input: 100 - 240 V ~ 50 - 60 Hz

• Output: 25 V 0 1.52 A

Approx.

1061.0 mm x 57.5 mm x 87.0 mm (41.8 inch x 2.3 inch x 3.4 inch)

360 W RMS

: Asian Power Devices Inc.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

SK8Y.DUSALLK_SIMPLE (Sheet)_ENG_MFL70460103.indd 5-8 2018-01-08  3:42:17