LG SK6 User Guide
Remote control
MFL70420008
Replacement of Battery
SOUND EFFECT: Selects a sound effect mode.
: Adjusts sound level of each speaker.
AV SYNC: Synchronizes the audio and video.
J: Displays the input source information.
AUTO VOL: Adjusts too loud or low output volume
level appropriately.
AUTO POWER: Automatically turns on by an input
source.
Additional Information
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other
open source licenses, that is contained in this product, please
visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and
handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last
shipment of this product. This offer is valid to anyone in
receipt of this information.
ENGLISH
SIMPLE MANUAL
LG Wi-Fi
Specication
Power
consumption
AC adapter
Dimensions
(W x H x D)
Amplier
(Total RMS
Output
power)
Designandspecicationsaresubjecttochange
without notice.
Refer to the main label.
• Model : DA-50F25
• Manufacturer : Asian Power
Devices Inc.
• Input : 100 - 240 V ~ 50 - 60 Hz
• Output : 25 V 0 2 A
Approx.
1061.0 mm x 57.5 mm x
87.0 mm
360 W RMS
Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download
Owner’s Manual. Some of the content in this manual may differ from your unit.
MODEL
SK6
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
SK6.DMYSLLK_SIM (Sheet)_MFL70420008.indd 2 2018-04-03 11:33:13
TV Connection
Network Connection
Front Panel
.The buttons are located on the side
LED indicator
1 (Standby) · · · · · · · · · · · ·Switches the unit ON or OFF.
F (Function) · · · · · · · · · · · · · · · · · · · · · · · · ·Selects function.
p/o (Volume) · · · · · · · · · · · · · · · · · · · · · Adjusts volume.
· · · · · · · · · · · · · · · · · · · · · · · · · · · Selects Wi-Fi function.
LED indicator : Shows connection status.
• White (Blinking): Waiting for network connection
on Wi-Fi function.
• White (Staying on): Network connection is
completed on Wi-Fi function or the other functions
are selected.
• White (Dimmed): Standby mode with network
connection.
• Red (Staying on): Standby mode without network
connection.
Rear Panel
DC IN· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · AC adapter input
OPTICAL IN · · · · · · · · · · · · Connect to an optical device.
PORTABLE IN· · · · · · · · · · · · · · · Connect portable device.
USB (Service only) · · · · · · · · S/W download connector.
LAN · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Connect to router.
HDMI IN · · · · · · · · · ·Connect to device with HDMI OUT.
HDMI OUT (TV ARC)· · · · · · · · · · · · · · · Connect to a TV.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar.
c The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.
Manually Subwoofer Connection
If the subwoofer does not make sound, try to
connect manually.
a Press Pairing button on the rear of the wireless
subwoofer.
• The green LED on the rear of the wireless
subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the Pairing button.)
b Turn on the sound bar.
c Pairing is completed.
• The green LED on the rear of the wireless
subwoofer turns on.
Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
1 m
!
Connect the sound bar and TV using Optical ( ) or
HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
HDMI(ARC) Connection
a Connect the sound bar to the TV using HDMI
cable.
b Set up [External Speaker (HDMI ARC)] on your
TV setting menu.
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is
a high priority.
Additional Device Connection
a Connect to the external device like as follow.
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing F on the remote
control or unit repeatedly.
a
c
b
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home
network.
c Connect the sound bar to the power supply.
All devices should be connected to same
router.
Download LG Wi-Fi Speaker Application
Download “LG Wi-Fi Speaker” on the App Store or
Google Play Store.
LG Wi-Fi Speaker
Launch LG Wi-Fi Speaker App
Follow the steps for wired or wireless connection
displayed on the screen.
SK6.DMYSLLK_SIM (Sheet)_MFL70420008.indd 3-4 2018-04-03 11:33:15
Loading...