Additional Information
Specification
Power |
Refer to the main label. |
|
consumption |
||
|
||
|
yy Model : DA-50F25 |
|
|
yy Manufacturer : Asian Power |
|
AC adapter |
Devices Inc. |
|
yy Input : |
||
|
||
|
100 - 240 V ~ 50 - 60 Hz |
|
|
yy Output : 25 V 02 A |
|
|
|
|
Dimensions |
Approx. |
|
891.0 mm X 57.5 mm X 87.8 mm |
||
(W x H x D) |
||
With foot |
||
|
||
|
|
|
Bus Power |
5 V 0 500 mA |
|
Supply (USB) |
||
|
||
Amplifier |
|
|
(Total RMS |
360 W RMS |
|
Output power) |
|
Design and specifications are subject to change without notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
SK5Y.DZAFLLK_SIM_ENG_MFL70420380.indd 1-2
<![endif]>ENGLISH
SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual. Some of the content in this manual may differ from your unit.
MODEL
SK5Y
MFL70420380 |
www.lg.com |
Copyright © 2018 LG Electronics Inc. All Rights Reserved. |
2018-06-19 8:51:08
Front Panel
The buttons are located on the side.
1(Standby)· · · · · · · · · · · Switches the unit ON or OFF
F (Function) · · · · · · · · · · · · · · · · Selects· · · · · ·Function·
o/p(Volume) · · · · · · · · · · · · · · ·Adjusts· · · Volume
Rear Panel
DC IN |
· · · · · |
· · |
· · · · · · · · · |
· · ·Connect to the AC adapter |
OPTICAL IN |
·· ·· ·· ·· ·· ·· ·· ·· ·· ·· ·· Connect to an Optical device |
|||
PORTABLE IN |
· · · · · · · · |
Connect to a Portable device |
||
USB |
· · · |
· · |
· · · · · · · · · |
· · · · Connect to a USB device |
HDMI OUT (TV ARC) · · · · · · · · · · · · · · Connect to a TV
HDMI IN · · · · · · · · ·Connect to HDMI out on a device
SK5Y.DZAFLLK_SIM_ENG_MFL70420380.indd 3-4
1 Subwoofer Connection
Place the wireless subwoofer near the sound bar and follow steps below.
AConnect the power cord of wireless subwoofer and sound bar to the outlet.
BTurn on the main unit :
The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to connect manually.
APress Pairing button on the rear of the wireless subwoofer.
yyThe green LED on the rear of wireless
subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing button.)
BTurn on the main unit.
CPairing is completed.
yyThe green LED on the rear of wireless subwoofer turns on.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1m to prevent wireless interference.
!1 m
2 |
|
TV Connection |
Connect with the Sound Bar and TV using
Optical () or HDMI ARC (
).
Optical Connection
AConnect the sound bar to the TV using Optical cable.
BSet up [External Speaker (Optical)] on your TV setting menu.
TV
HDMI(ARC) Connection
AConnect the sound bar to the TV using HDMI cable.
BSet up [External Speaker (HDMI ARC)] on your TV setting menu.
TV
yy HDMI connection is unavailable if your TV does not support HDMI ARC.
yy If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.
Additional Device Connection
A Connect to the external device as follows.
(Set-top Box, Player etc.)
TV
OROR
Remote control
ASC/DTS V:X/BASS BLAST: Selects the sound effect.
REAR +/-: Adjusts the volume level of rear speakers. (For rear speakers)
Adjustment of the Rear speakers volume levels and using Surround Sound are applied only when the rear speakers are connected.
Rear speaker kit sold separately.
WOOFER +/-: Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an input source.
Replacement of battery
BSet the input source by pressing F on the remote control or unit repeatedly.
2018-06-19 8:51:10