LG SK4D User Guide

SIMPLE MANUAL
MFL70585605
Wireless Sound Bar
ENGLISH
Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner's Manual. Some of the content in this manual may differ from your unit.
MODEL SK4D
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
1806_Rev03
SK4D.DCANLLK_SIM_ENG_MFL70585605.indd 1 2018-07-20  1:39:24
Front Panel
>
The buttons are located on the rear.
··································Standby / On
·······························Selects Function
·························Adjusts Volume
Rear Panel
DC IN ·················· Connect to the AC adapter OPTICAL IN · · · · · · · · · · · Connect to an Optical device USB
/ ··················Connect to a USB device
Subwoofer Connection1
Place the wireless subwoofer near the sound bar and follow steps below.
a Connect the power cord of the sound bar and
the wireless subwoofer to the outlet.
b Turn on the sound bar. c The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's yellow green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to connect manually.
a Press PAIRING button on the rear of the
wireless subwoofer.
y The yellow green LED on the front of the
wireless subwoofer blinks quickly. (If the yellow green LED does not blink, press and hold the PAIRING button.)
b Turn on the sound bar. c Pairing is completed.
y The yellow green LED on the front of the
wireless subwoofer turns on.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.
1 m (3.3 ft)
SK4D.DCANLLK_SIM_ENG_MFL70585605.indd 2 2018-07-20  1:39:26
TV Connection 2
a Connect the sound bar to the TV using Optical
cable.
b Set up [External Speaker (Optical)] on your TV
setting menu.
TV
Additional Device Connection
a Connect to the external device as follows.
(Set-top Box, Player etc.)
TV
b Set the input source by pressing F repeatedly.
Remote control
ASC/BASS BLAST/CINEMA: Selects the sound effect.
NIGHT ON/OFF: Turns down the volume at night.
WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF: Automatically turns on by an input source.
Replacement of battery
SK4D.DCANLLK_SIM_ENG_MFL70585605.indd 3 2018-07-20  1:39:27
Additional Information
Specication
Power consumption
AC adapter
Dimensions (W x H x D)
Refer to the main label.
y Model :
DA-38A25
y Manufacturer : Asian Power
Devices Inc.
y Input :
100 - 240 V ~ 50 - 60 Hz
y Output : 25 V 0 1.52 A
Approx. 890 mm x 53 mm x 85 mm (35 inch x 2.1 inch x 3.3 inch) Without foot
Bus Power Supply (USB)
Amplier (Total RMS Output power)
Design and specications are subject to change
without notice.
5 V 0 500 mA
300 W RMS
SK4D.DCANLLK_SIM_ENG_MFL70585605.indd 4 2018-07-20  1:39:27
Industry Canada Statement
[For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz frequency bands] i. the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
ii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
iv. [for devices operating in the band 5250-5350 MHz
having an e.i.r.p. greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
SK4D.DCANLLK_SIM_ENG_MFL70585605.indd 5 2018-07-20  1:39:27
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
SK4D.DCANLLK_SIM_ENG_MFL70585605.indd 6 2018-07-20  1:39:27
Loading...