LG SK10Y User Guide

SIMPLE MANUAL

MFL70581771

LG Wi-Fi Sound Bar

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

ENGLISH

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or the other surface of the product.

yThe appliance is not intended for use by young

children or inrm persons without supervision.

yYoung Children should be supervised to ensure

that they do not play with appliance.

yIf the appliance is supplied from a cord extension

set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing (of water or any form of liquid) or ingress of moisture.

RF Radiation Exposure Statement

This equipment shall be installed and used at a minimum distance of 20 cm from the human body.

The use of the 5,150-5,350 MHz band is restricted to indoor use only. The restriction exists in the countries Australia (AU) and New Zealand (NZ). (For Wi-Fi/ Bluetooth built-in model or Wi-Fi built-in model)

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

MODEL SK10Y

www.lg.com

SK10Y.DAUSLLK_SIMPLE (Sheet)_V2_ENG_MFL70581771.indd 1-4 2019-01-09  8:25:15

Front Panel

LED indicator

1 (Standby) ··········Switches the unit ON or OFF. F (Function) ························Selects function

p/o (Volume)·····················Adjusts volume

··························Selects Wi-Fi function.

LED indicator : Shows connection status.

• White (Blinking): Waiting for network connection on Wi-Fi function

• White (Staying on): Network connection is completed on Wi-Fi function or the other functions are selected.

• White (Dimmed): Standby mode with network connection.

• Red (Staying on): Standby mode without network connection.

Rear Panel

USB (Service only) ········S/W download connector.

LAN ································Connect to router. PORTABLE IN···············Connect portable device. OPTICAL IN ············Connect to an optical device. HDMI OUT (TV ARC)··············· Connect to a TV. HDMI IN (1) / HDMI IN (2) ··Connect to device with

HDMI OUT.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar. c The sound bar and wireless subwoofer will be

automatically connected. The subwoofer's green LED turns on.

Manually Subwoofer Connection

If the subwoofer does not make emit any sound, you can try connecting it manually.

a Press Pairing button on the rear of the wireless

subwoofer.

• The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing button.)

b Turn on the sound bar. c Pairing is completed.

• The green LED on the rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

1 m

!

TV Connection

Connect the sound bar and TV using Optical ( ) or

HDMI ARC ( ).

Optical Connection

a Connect the sound bar to the TV using Optical

cable.

b Set up [External Speaker (Optical)] on your TV

setting menu.

HDMI (ARC) Connection

a Connect the sound bar to the TV using HDMI

cable.

b Set up [External Speaker (HDMI ARC)] on your

TV setting menu.

• HDMI connection is unavailable if your TV does not support HDMI ARC.

• If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.

Additional Device Connection

a Connect to the external device like as follow.

(Set-top Box, Player etc.)

Network Connection

a Check network condition. A router connected to

network should be installed.

b Connect your smart device to your home

network.

c Connect the sound bar to the power supply.

All devices should be connected to same router.

Download LG Wi-Fi Speaker Application

Download “LG Wi-Fi Speaker” on the App Store or Google Play Store.

LG Wi-Fi Speaker

Launch LG Wi-Fi Speaker App

Follow the steps for wired or wireless connection displayed on the screen.

Remote control

Replacement of Battery

SOUND EFFECT: Selects a sound effect mode.

: Adjusts sound level of each speaker.

AV SYNC: Synchronizes the audio and video. J: Displays the input source information. AUTO VOL: Adjusts too loud or low output volume

level appropriately. AUTO POWER: Automatically turns on by an input

source.

Additional Information

Specication

Power requirement

Power consumption

Dimensions (W x H x D)

Amplier (Total RMS Output power)

Design and specications are subject to change without notice.

Rear Speakers Ready

Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)

Refer to the main label.

Approx.

1443.0 mm x 63.0 mm x

146.0 mm

550 W RMS

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

b Set the input source by pressing F on the remote

control or unit repeatedly.

SK10Y.DAUSLLK_SIMPLE (Sheet)_V2_ENG_MFL70581771.indd 5-8 2019-01-09  8:25:18