LG SK1 User's Guide

SIMPLE MANUAL
MFL71667309
Sound Bar
ENGLISH
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
yReorient or relocate the receiving antenna. yIncrease the separation between the equipment and
the receiver.
yConnect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
yConsult the dealer or an experienced radio/TV
technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired
operation. Any changes or modications in construction
of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specic
operating instructions for satisfying RF exposure compliance.
Supplier's Declaration of Conformity
Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building
Englewood Cliffs, New Jersey 07632
Email lg.environmental@lge.com
Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features,
LG Customer Information Center
1-800-243-0000 USA, Consumer 1-888-865-3026 USA, Commercial
visit http://www.lg.com and then download Owner's Manual. Some of the content in this manual may differ from your unit.
Register your product Online!
www.lg.com
www.lg.com
Copyright © 2019-2020 LG Electronics Inc. All Rights Reserved.
SK1.AUSALLF_SIM (Sheet)_MFL71667309.indd 1-4 2020-06-03   1:53:09
Printed in China
Front Panel TV Connection
State LED
A
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without network
Bluetooth LED
B
yBlue (Blinking): Waiting for Bluetooth connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote control.
connection.
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
a Connect to the external device as follows.
(Set-top Box, Player etc.)
TV
Remote control Additional Information
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF : Dynamic Range Control optimizes
the volume level of compatible Dolby Digital content.
Replacement of battery
Specication
Power requirements
Power consumption
Dimensions (W x H x D)
Amplier (Total RMS Output power)
Design and specications are subject to change
without notice.
Refer to the main label.
Refer to the main label.
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot (25.6 inch x 3.1 inch x 3.7 inch)
40 W RMS
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on the rear of the unit. For details, download the online owner’s manual. http://www.lg.com
a b
Rear Panel
PORT. IN (Portable) Connect to a portable device. OPT. IN (Optical) ····· Connect to an optical device.
dc
b Set the input source by pressing OPTICAL on
the remote control.
BUY :
SK1.AUSALLF_SIM (Sheet)_MFL71667309.indd 5-8 2020-06-03   1:53:15
Loading...