SIMPLE MANUAL
Sound Bar
Please read this manual carefully before operating your set and retain it for
future reference. To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
MODEL
SK1
Copyright © 2018-2020 LG Electronics Inc. All Rights Reserved.
www.lg.com
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufcient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this equipment in a conned space
such as a book case or similar unit.
CAUTION: Do not use high voltage products around this
product. (ex. Electrical swatter) This product may malfunction
due to electrical shock.
CAUTION: No naked ame sources, such as lighted candles,
should be placed on the apparatus.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to
protect it from over heating. The openings should never be
blocked by placing the product on a bed, sofa, rug or other
similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruction has
been adhered to.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects lled with liquids, such
as vases, should be placed on the apparatus.
NOTICE: For safety marking information including product
identication and supply ratings, please refer to the main
label on the bottom or the other surface of the product.
For models using a battery
This device is equipped with a portable battery or accumulator.
CAUTION: Risk of re or explosion if the battery is replaced
by an incorrect type.
How to Safely remove the batteries or the battery pack
from the equipment: To Remove the old batteries or battery
pack, follow the assembly steps in reverse order. To prevent
contamination of the environment and bring on possible
threat to human and/or animal health, the old batteries or
the battery pack must be put in an appropriate container at
designated collection points. Do not dispose of batteries or
battery pack together with other waste. It is recommended
that you use local, free reimbursement systems batteries or
battery packs, (may not be available in your area).
The batteries or the battery pack should not be exposed to
excessive heat such as sunshine, re or the like.
POWER: This unit operates on a mains supply of
200 - 240 V ~ 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use a fuse of
the same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement fuse
cover contact your dealer. If the type of plug supplied is
not suitable for the mains sockets in your home, then the
plug should be removed and a suitable type tted. Please
refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol 6 or coloured green
or green and yellow. If any other plug is tted, use same
rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the
wires in the mains lead of this unit may not correspond
with the coloured marking identifying the terminals in
your plug, proceed as follows: The wire which is coloured
blue must be connected to the terminal which is marked
with the letter N or coloured black. The wire which is
coloured brown must be connected to the terminal which
is marked with the letter L or coloured red.
Disposal of your old appliance
1. This crossed-out wheeled bin symbol indicates that waste
electrical and electronic products (WEEE) should be
disposed of separately from the municipal waste stream.
2. Old electrical products can contain hazardous substances
so correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health. Your old appliance may contain reusable
parts that could be used to repair other products, and
other valuable materials that can be recycled to conserve
limited resources.
3. You can take your appliance either to the shop where you
purchased the product, or contact your local government
waste office for details of your nearest authorised WEEE
collection point. For the most up to date information for
your country please see www.lg.com/global/recycling
Disposal of waste batteries/accumulators
1. This symbol may be combined with chemical symbols for
mercury (Hg), cadmium (Cd) or lead (Pb) if the battery
contains more than 0.0005% of mercury, 0.002% of
cadmium or 0.004% of lead.
2. All batteries/accumulators should be disposed separately
from the municipal waste stream via designated collection
facilities appointed by the government or the local
authorities.
3. The correct disposal of your old batteries/accumulators
will help to prevent potential negative consequences for
the environment, animal and human health.
4. For more detailed information about disposal of your old
batteries/ accumulators, please contact your city office,
waste disposal service or the shop where you purchased
the product. (http://www.lg.com/global/sustainability/
environment/take-back-recycling/global-networkeurope)
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type Sound
Bar is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet
address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
Symbols
Refers to alternating current (AC).
~
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Technology with the human touch
GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the
original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG
equipment, for a period of 12 months from the original date of purchase. These claims must be made in accordance with the
published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorised modifications are made to the apparatus, or if non
standard components are used or if the serial number of the apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally purchased. The dealer
may, before carrying out service under guarantee, require a receipted account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVIDED.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG to assist you
in the future should you lose your receipt, your units be stolen, or should modifications be necessary.
• To obtain information or assistance:
Call UK: 0344 847 5454 IE: 01 686 9454
MODEL NO.* SERIAL NO.* DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lg.com/uk
(Service website : www.lg.com/uk/support)
SK1.AGBRLLF_SIM (Sheet)_MFL71667311.indd 1-4 2020-11-26 2:45:33
Front Panel TV Connection
State LED
A
yWhite (Staying on): Optical function is selected.
yWhite (Blinking twice and staying on): LG Sound
Sync (Optical) function is selected.
yGreen (Staying on): Portable function is selected.
yRed (Staying on): Standby mode without network
Bluetooth LED
B
yBlue (Blinking): Waiting for Bluetooth connection.
yBlue (Staying on): Paired with Bluetooth device.
This unit operates only with the remote
control.
connection.
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
a Connect to the external device as follows.
(Set-top Box,
Player etc.)
TV
Remote control
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF : Makes comfortable sound at Dolby
Digital.
Replacement of battery
How to disconnect the wireless network
connection or the wireless device
Press and hold (Mute) on the remote control for
about 2 seconds and turn off the unit.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes
on the rear of the unit. For details, download the online
owner’s manual. http://www.lg.com
a b
dc
BUY :
b Set the input source by pressing OPTICAL on
Rear Panel
the remote control.
USB (Service only) ····· S/W download connector.
PORT. IN (Portable) Connect to a portable device.
OPT. IN (Optical) ····· Connect to an optical device.
SK1.AGBRLLF_SIM (Sheet)_MFL71667311.indd 5-8 2020-11-26 2:45:39
Specication
Design and specications are subject to change
without notice.
Additional Information
Power requirements
Power
consumption
Dimensions
(W x H x D)
Amplier
(Total RMS
Output power)
Refer to the main label.
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
40 W RMS