LG SJ6 User Guide

Remote control

Replacement of battery

SOUND EFFECT: Selects a sound effect mode.

F: Selects the function and the input source.
8: Turns down the volume at night.

:

Adjusts sound level of Treble, Bass and Sub-woofer.

INFO:

Displays the input source information.

AV SYNC: Synchronizes the audio and video.

SLEEP: Sets the system to turn off automatically at a specied

time.

AUTO VOL:

appropriately.

AUTO POWER: Automatically turns on by an input source.

Adjusts too loud or low output volume level

OPEN SOURCE SOFTWARE NOTICE
INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD­ROM for a charge covering the cost of performing such distribution
(such as the cost of media, shipping and handling) upon email
request to [e-mail]. This offer is valid for three (3)
years from the date on which you purchased the product.

ENGLISH

SIMPLE MANUAL

SJ6

SMART Hi-Fi

Additional Information

Specication

Power
consumption

AC adapter

Dimensions
(W x H x D)

Amplier
(Total RMS
Output power)

Design and specications are subject to change without notice.

Refer to the main label.

yModel : DA-50F25
yManufacturer : Asian Power Devices Inc.
yInput : 100 - 240 V ~ 50 - 60 Hz
yOutput : 25 V 0 2 A

Approx. 950 mm x 55 mm x 85 mm

320 W RMS

AUDIO

Wireless Multi-room Sound Bar

Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download
Owner’s Manual. Some of the content in this manual may differ from your unit.

MODEL
SJ6

*MFL69981173*

Copyright © 2017 LG Electronics. All Rights Reserved

www.lg.com

Network ConnectionTV Connection

Front Panel

The buttons are located on the rear.

LED indicator

1 ·······································Standby

F ································Selects function

-/+ ·······························Adjusts volume

····················Connects wireless network.

···· Adds the additional Music Flow product to
your network. (In case that one or more Music Flow
product is connected.)

LED indicator: Shows connection status.

• White (Blinking): Waiting for network connection

• White (Staying on): Network connection is

completed.

• White (Dimmed): Standby mode with network

connection.

• Green (Staying on): The rst group was set.

• Red (Staying on): Standby mode without network

connection.

Rear Panel

Subwoofer Connection

Place the wireless subwoofer near the sound bar and
follow steps below.

a Connect the power cord of the sound bar and the

wireless subwoofer to the outlet.

b Turn on the sound bar. :

The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.

Subwoofer Connection Manually

If the subwoofer does not make sound, try to connect
manually.

a Press Pairing button on the rear of the wireless

subwoofer.

• The green LED on the rear of wireless
subwoofer blinks quickly.

b Turn on the sound bar.
c Pairing is completed.

• The green LED on the rear of wireless
subwoofer turns on.

Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.

> 1 m

Connect the sound bar and TV using Optical ( ) or
HDMI ARC (

Optical Connection

a Connect the sound bar to the TV using

b Set up [External Speaker (Optical)] on your

HDMI(ARC) Connection

a Connect the sound bar to the TV using HDMI

b Set up [External Speaker (HDMI ARC)] on

• HDMI connection is unavailable if your TV

• If this unit is connected by OPTICAL and

).

Optical cable.

TV setting menu.

cable.

your TV setting menu.

does not support HDMI ARC.

ARC at the same time, the ARC signal is a
high priority.

Additional Device Connection

a Connect to the external device like as follow.

(Set-top Box,
Player etc.)

d

c

a

b

a Check network condition. A router connected to

network should be installed.

b Connect your smart device to your home network.
c Connect the sound bar to the power supply.
d Connect the media server to your home network in

order to enjoy music.

All devices should be connected to same router.

• Download LG Music Flow Application

Download “Music Flow Player” on the App Store or
Google Play Store.

• Launch Music Flow Player App

Follow the steps for wired or wireless connection
displayed on the screen.

DC IN ·····················Connect to AC Adapter.
OPTICAL IN ··········Connect to an optical device.
PORTABLE IN ············Connect portable device.
USB (Service only) ······S/W download connector.
LAN·····························Connect to router.
HDMI IN ········Connect to device with HDMI OUT.
HDMI OUT (TV ARC) ············· Connect to a TV.

OR

b Set the input source by pressing F on the

remote control or unit repeatedly.