LG SJ5 User Guide
Additional Information
Specication
Power
consumption
AC adapter
Dimensions
(W x H x D)
Bus Power
Supply (USB)
Amplier
(Total RMS
Output power)
Design and specications are subject to change without
notice.
Refer to the main label.
yModel :
DA-50F25
yManufacturer : Asian Power
Devices Inc.
yInput :
100 - 240 V ~ 50 - 60 Hz
1.5 A Max.
yOutput : 25 V 0 2 A
Approx.
950 mm x 55 mm x 85 mm
With foot
5 V 0 500 mA
320 W RMS
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other
open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and
handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on
which you purchased the product.
ENGLISH
SIMPLE MANUAL
Wireless
Sound Bar
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
MODEL
SJ5
*MFL69670136*
SJ5.DZAFLLK_SIM_ENG_MFL69670136.indd 1-2 2017-05-10 �� 10:20:11
Copyright 2017 LG Electronics. All Rights Reserved
www.lg.com
Front Panel
The buttons are located on the rear.
······································ Standby
·······························Selects Function
··························Adjusts Volume
Rear Panel
DC IN ·················· Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
PORTABLE IN ········ Connect to a Portable device
USB ·················· Connect to a USB device
HDMI OUT (TV ARC) ·············· Connect to a TV
HDMI IN ········· Connect to HDMI out on a device
Subwoofer Connection1
Place the wireless subwoofer near the speaker and
follow steps below.
a Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to
connect manually.
a Press Pairing button on the rear of the wireless
subwoofer.
yThe green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the main unit.
c Pairing is completed.
yThe green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
TV Connection 2
Connect with the Sound Bar and TV using
Optical ( ) or HDMI ARC ( ).
Optical Connection
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
HDMI(ARC) Connection
a Connect the sound bar to the TV using
HDMI cable.
b Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
TV
yHDMI connection is unavailable if your TV
does not support HDMI ARC.
yIf this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
Remote control
8: Turns down the volume at night.
AV SYNC: Synchronizes the audio and video.
AUTO VOL: Auomatically adjusts too loud or low output
volume level appropriately.
AUTO POWER: Automatically turns on by an input source.
Replacement of battery
!P
SJ5.DZAFLLK_SIM_ENG_MFL69670136.indd 3-4 2017-05-10 �� 10:20:13
Additional Device Connection
a Connect to the external device as follows.
(Set-top Box,
Player etc.)
TV
OR
b Set the input source by pressing F on the remote
control or unit repeatedly.
Loading...