Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
DC IN ·················· Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
PORTABLE IN ········ Connect to a Portable device
USB ··················Connect to a USB device
HDMI OUT (TV ARC) ·············· Connect to a TV
HDMI IN ········· Connect to HDMI out on a device
Subwoofer Connection1
Place the wireless subwoofer near the speaker and
follow steps below.
a Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to
connect manually.
a Press Pairing button on the rear of the wireless
subwoofer.
yThe green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the main unit.
c Pairing is completed.
yThe green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
Design and specications are subject to change without
notice.
Refer to the main label.
Networked standby : 1.5 W
(If all network ports are activated.)
yModel :
DA-38A25
yManufacturer : Asian Power
Devices Inc.
yInput :
100 - 240 V ~ 50 - 60 Hz
1.2 A
yOutput : 25 V 0 1.52 A
Approx.
890 mm x 55 mm x 85 mm
With foot
5 V 0 500 mA
420 W RMS
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
Rear Surround sound
Wireless Rear Speakers Kit included for real
surround sound.(SPJ4-S)
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other
open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and
handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on
which you purchased the product.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
Wireless Sound Bar is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency rangeOutput power (Max.)
2402 to 2480 MHz10 dBm
5730 to 5821 MHz13 dBm
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
When you turn on surround function, you can enjoy
magnificent surround sound for all the input sound
source with rear speakers.
The initial setting for the surround function is
OFF, turn the surround function ON to use it.
SJ4R/SJ4Y
Surround On: Press and hold REAR LEVEL o button
on the remote control about 2 seconds.
Surround Off: Press and hold REAR LEVEL p button
on the remote control about 2 seconds.
SJ5Y
Surround On: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO VOL button repeateadly to select ON - SURROUND in
the display window.
Surround Off: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO VOL button repeateadly to select OFF - SURROUND in
the display window.
Specication of Wireless reciever
Power
requirement
Power
consumption
Dimensions
(W x H x D)
Design and specications are subject to change
without notice.
Refer to the main label on the
wireless receiver.
Refer to the main label on the
wireless receiver.
Approx.
60 mm x 220 mm x 175 mm
About Ferrite Core (Optional)
twice
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment
type RECEIVER is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be
installed and operated with a minimum distance of 20
cm between the device and the body.
Frequency rangeOutput power (Max.)
5730 to 5821 MHz13 dBm