LG SJ2 Quick Guide

SIMPLE MANUAL

MFL70585619

Wireless
Sound Bar

Please read this manual carefully before operating your set

and retain it for future reference.

To view the instructions of advanced features,

visit http://www.lg.com and then download Owner's Manual.

Some of the content in this manual may differ from your unit.

ENGLISH

MODEL
SJ2

www.lg.com

Copyright © 2018 LG Electronics Inc. All Rights Reserved.

1809_Rev01

SJ2.DRUSLLK_SIM_ENG_MFL70585619.indd 1 2018-09-12  8:53:56

Front Panel

!

Subwoofer Connection1

The buttons are located on the rear.

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Standby

······························ Selects Function.

/ ························· Adjusts Volume.

Rear Panel

(USB) ··············· Connect to a USB device.

PORT. IN (Portable) ··· Connect to a Portable device.
OPT. IN (Optical) ······ Connect to an Optical device.

Place the wireless subwoofer near the sound bar and
follow steps below.

a Connect the power cord of the sound bar and

the wireless subwoofer to the outlet.

b Turn on the sound bar.
c The sound bar and wireless subwoofer will be

automatically connected. The subwoofer's
green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to
connect manually.

a Press Pairing button on the rear of the wireless

subwoofer.

y The green LED on the rear of the wireless

subwoofer blinks quickly.
(If the green LED does not blink, press and
hold the Pairing button.)

b Turn on the sound bar.
c Pairing is completed.

y The green LED on the rear of the wireless

subwoofer turns on.

Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.

1 m

SJ2.DRUSLLK_SIM_ENG_MFL70585619.indd 2 2018-09-12  8:53:58

a Connect the sound bar to the TV using

an Optical cable.

b Set up [External Speaker (Optical)] on

your TV setting menu.

TV

Additional Device Connection

a Connect to the external device as follows.

(Set-top
Box, Player
etc.)

TV

b Set the input source by pressing OPTICAL on

the remote control or pressing F repeatedly.

Remote controlTV Connection 2

STANDARD/BASS BLAST: Selects the sound effect.

DRC ON/OFF: Dynamic Range Control optimizes the

volume level of compatible Dolby Digital content.

WOOFER LEVEL +/-: Adjusts the volume level of
subwoofer.

AUTO POWER ON/OFF: Automatically turns on by an
input source.

Replacement of battery

SJ2.DRUSLLK_SIM_ENG_MFL70585619.indd 3 2018-09-12  8:53:59