LG SA565JP User Manual

Owner's Manual

LASER PROJECTOR

Please read the safety information carefully before using the product.

SA560

SA565

	www.lg.com
P/NO: SAC30666052 (1212-REV01)	(Brazil : www.lge.com)

2LICENSE

LICENSE

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.

ABOUT DIVX VIDEO: DivX® is a digital video format created by! " " " # video.

$%&' ( ( )&*&+* )/$+ 0 must be registered in order to play purchased DivX Video-on- Demand (VOD) movies. To obtain your registration code, locate& " 3 ! com for more information on how to complete your registration.

4 5 6787 9 premium content.”

4 9 " ; Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :

< =>? @<GH < J@7 @@8H < ?6? <67H < ?6> =<JK

" 5 /( 5 /( 5 9 * / " (5 /( 9 " ; 9 " ; 5 /( 9 ' N

Manufactured under license under U.S. Patent Nos: 5,956,674; ? ><J G87H @ J8< ?G? ^ ' N # # ^ 9 N N " ^ N N " 99 " ; ^ N = 7 " ; N Inc. Product includes software. © DTS, Inc. All Rights Reserved.

This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions.

NOTE

Image shown may differ from your projector.

Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual.

Safety Precautions

3

SAFETY INSTRUCTIONS

Please take note of the safety instructions to prevent any potential accident or misuse of the projector.

9 9 z #

arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s" magnitude to constitute a risk of electric shock to persons.

! " within an equilateral triangle is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

* & ) ' ) 5) (N{ &` `( ) $+ ) ) ( N5& { & +& ) |&N) 5(N | & ' & $(+ OR MOISTURE.

FCC NOTICE

Warning - Class B

(b) For a Class B Digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent! " 0

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to6? ` " are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 5 # 9 interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

* ! radio/TV technician for help.

4Safety Precautions

Read these instructions. { 5 # 9 Follow all instructions.

Indoor Installation

WARNING

Do not place the projector in direct sunlight or near heat sources such as radiators, fires, stoves, etc.

- This may result in fire.

Do not place flammable materials such as aerosols near the projector. - This may result in fire.

Do not allow children to cling to or climb up to the projector.

- This may cause the projector to fall, causing injury or death.

Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion.

- This may result in fire due to the increase in internal temperature.

Do not place the projector close to sources of steam or oil such as a humidifier or kitchen counter.

- This may result in fire or electric shock.

Do not place the projector where it " 9 !

- This may result in fire.

Do not use the projector in a damp place such as a bathroom where it is likely to get wet.

- This may result in fire or electric shock.

Do not allow a tablecloth or curtain to block the air vent.

- This may result in fire due to the increase in the internal temperature.

Ensure good ventilation around the projector. The distance between the projector and the wall should be atG7 ".

- This will prevent fire due to the increase in the internal temperature.

When installing the projector on a ceiling or wall, a professional technician should install the product using the authorized tools.

- If installed improperly, the projector may fall, causing personal injury or property damage. To install the product, please contact the customer support center.

When installing or adjusting a mounting device, do not use oil or lubricant for the purpose to prevent loosening of screws. If you apply an adhesive oil or lubricant to the projector, this may cause the case to crack and the projector to fall. This may also cause serious personal injury and damage to the projector when there is a person under the mounting device.

Safety Precautions

5

		CAUTION		Do not place heavy objects on the
	When placing the projector on a table			power cord.
				- This may result in fire or electric
		or shelf, be careful not to put it near
				shock.
		the edge.
				Never touch the power plug with wet
		- The projector could fall due to bal-
				hands.
		ance problems, which may cause
				- This may result in electric shock.
		personal injury or damage to the
				Do not plug too many devices into
		product. Make sure to use the pro-
				one multi-power outlet.
		jector cabinet or stand that fits the
				- This may result in fire due to the
		projector.
				power outlet overheating.
	When moving the projector, make
				Prevent dust from collecting on the
		sure to switch it off and remove the
				power plug pins or outlet.
		power plug and cords.
				- This may result in fire.
		- The power cord may be damaged,
				To turn off the main power, remove
		resulting in fire or electric shock.
				the power plug, which should be
	Do not place the projector on an
				positioned so it is easy to access for
		unstable or vibrating surface such as
				operation.
		a wobbly shelf or a slope.
		- It may fall and cause injury.
	Be careful not to tip the projector over
	# 9 !
		the projector.
		- This may cause personal injury or
		damage to the projector.

Power

WARNING

The grounding wire should be connected.

- Ensure that you connect the grounding cable to avoid electric shock.

If it is not possible to ground the unit,• separate circuit breaker.

Do not try to ground the projector by connecting it to telephone wires, lightning rods or gas pipes.

The power plug should be inserted fully into the power outlet.

- An unstable connection may cause a fire.

6 Safety Precautions

				When in Use
		CAUTION
	5 9 " # 99 9
					WARNING
		- A damaged wire may create a fire		Do not place anything containing
		hazard.
					liquid on top of the projector such as
	Ensure the power cord and plug are
					a vase, flower pot, cup, cosmetics, or
		not damaged, modified, severely
					medicine; or ornaments, candles, etc.
		bent, twisted, pulled, sandwiched
					- This may result in fire or electric
		or hot. Do not use the product if the
					shock, or cause injury due to falling.
		power outlet is loose.
				When there is smoke or a strange
		- This may result in fire or electric shock.
					smell coming out from the projector
	{ # # " 9
					or a foreign object falls into the pro-
		devices.
					jector, please switch it off and unplug
		- The wire's sheath may melt, which
					it from the power outlet and contact
		may result in fire or electric shock.
					our service center.
	Place the projector where people will
					- Otherwise, this may result in fire or
		not trip over or tread on the power
					electric shock.
		cord to protect the power cord and
				In the event that there is a heavy
		plug from any damage.
					impact or the cabinet is damaged,
		- This may result in fire or electric shock.
					switch it off, unplug it from the power
	Do not turn the projector on or off by
					outlet and contact an authorized ser-
		plugging in the power plug or unplug-
					vice center.
		ging it from the power outlet.
					- This may result in electric shock.
		(Do not use the power plug as a switch.)
				Do not insert pieces of metal such as
		- This may result in electric shock or
					coins, hairpins or metal debris, nor
		damage to the product.
					flammable materials such as paper or
	Do not insert a conductor into the other
					matches into the projector.
		side of the wall outlet while the power
					- This is to prevent electric shock or fire.
		plug is inserted into the wall outlet.
				In the event that liquid or a foreign
		In addition, do not touch the power
					object falls into the projector, switch it
		plug immediately after it is disconnected
					off and unplug it from the power outlet
		from the wall outlet.
					and contact our service center.
		- This may result in electric shock.
					- This may result in fire or electric
	Only use the official power cord pro-
					shock.
		vided by LG Electronics. Do not use
				Make sure that a child does not swal-
		other power cords.
					low the batteries when you replace
		- This may result in fire or electric
					the old remote control batteries with
		shock.
				# {
	Check the power cord specifications.
					of children.
		Do not use an inappropriate power
					- If a child swallows a battery, consult
		cable.
					a doctor immediately.
		- This may result in electric shock.
				Never open any cover on the projector.
					- There is a high risk of electric shock.

			Safety Precautions		7
Do not look directly into the lens		CAUTION
	Do not place heavy objects on the
when the projector is in use.
- The bright light may damage your		projector.
eyes.		- It may fall down and cause personal
When the lamp is on or has just been		injury.
turned off, avoid touching the air vent	Be careful not to allow any impact to
or lamp, because these will be very hot.		the lens during transport.
If there is a gas leak in the room with	Do not touch the lens of the projector.
the projector, do not touch the projector		- The lens may be damaged.
or power outlet. Open the windows	Do not use any sharp tools on the
for ventilation.		projector such as a knife or hammer,
- Sparks may cause fire or burns.		because this may damage the casing.
Unplug the power cord from the outlet	In the event that no image appears
during a lightning storm.		on the screen or no sound is heard,
- This will prevent shock or damage		stop using the projector. Switch off the
to the projector.		projector, unplug it from the power out-
Do not use the projector near		let and contact our service center.
electronic devices that generate a		- This may result in fire or electric shock.
strong magnetic field.	Do not drop anything onto
Do not put the plastic package used		the projector or allow anything to
to pack the projector around your		bang into the projector.
head.		- This may cause damage to the projector
- This may cause suffocation.		or personal injury.
Do not keep your hand on the projector	It is recommended that you maintain
for a long time when it is running.		a distance of more than 5 - 7 times
When you play a game by connecting		the diagonal length of the screen.
a game console to a projector, it is		- If you watch the screen at a close
recommended that you maintain a		distance for a long time, your eye
distance of more than four times the		sight may become worse.
diagonal length of the screen.	Do not block the light beam emitted
- Make sure that the connecting cable is		from the projector using a book or
long enough. Otherwise, the product		other object.
may fall causing personal injury or		- 9 ! ‚
damage to the product.		beam may result in fire. In addition,
Do not place the projector or its		the lens may be overheated and
remote control with battery in an		damaged by the reflected heat.
! " 9 "		Disable the AV function to stop projection
environment.		temporarily or turn off the power.
- This may result in fire.	Do not start the projector with the

volume turned up high.

- 5 9 " " " 9 9

8Safety Precautions

Cleaning

WARNING

Do not spray the projector with

water when cleaning. Make sure water does not flow into the projector.

- This may result in fire or electric shock.

Use air spray, a soft cloth or

a cotton swab moistened with a lens cleaning chemical or alcohol to remove dust or stains on the front projection lens.

CAUTION

Contact your seller or our service center once a year to clean the internal parts of the projector.

- If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector.

When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial shiner, abrasives,

# ! ƒ can damage the projector.

- This can result in fire, electric

shock or cause damage to the product (deformation and corrosion).

Remove the plug from the outlet before cleaning the product.

- Otherwise, this may result in electric shock.

Others

WARNING

When you go out, place the projector out of reach of animals, and remove the power plug from the wall outlet.

- Using a damaged power cord may result in short circuit or fire.

Do not use the projector near high-precision electronic devices or those that transmit weak radio signal.

- This may affect the operation of the product, causing an accident.

Only a qualified technician can disassemble or modify the projector. For diagnosis, adjustment, or repair, contact your seller or our service center.

-This may result in fire or electric shock.

Safety Precautions

9

CAUTION

Do not use or store the projector outdoors for a long time.

" ! # # ones.

- Burst or leaking batteries may result in damage or injury.

Be sure to unplug if the projector is not to be used for a long period.

- Accumulated dust may result in fire or electric shock due to overheating, ignition, or poor insulation.

Only use the specified type of battery.

- Burst or leaking batteries may result in damage or injury.

Do not charge the battery using any devices other than the one provided with the product.

- This may result in damage to the battery or fire.

Dispose of used batteries properly. - " ! correct method of disposal may vary depending on your country or region. Dispose of the battery pack

as instructed.

Do not throw or disassemble the battery. - " ! to damage to the battery.

Always use batteries approved and certified by LG Electronics.

- This will prevent damage or fire.Store batteries away from metallic

objects, such as keys and paper clips. -)! " increase in temperature, resulting in fire or burns.

Do not store the batteries near any heat source, such as a heater.

- This may result in fire or damage to the product.

Do not store batteries at temperatures9 @7 „ 9 " * " !{ "

reach of children.

- This will prevent personal injury or damage to the product.

Make sure that the battery is installed correctly. * !

The battery contains lithium-ion, so it must be handled with care. * " !

Make sure you use the same type of batteries for replacement.

Incorrect battery replacement may cause fire.

10 Safety Precautions

Laser

#WARNING

This laser projector contains a laser module. Do not disassemble or modify the projector as this could be dangerous.

… ; 9 ! radiation if you manipulate or alter the projector in a way not specified in the user manual.

#CAUTION

This laser projector is a class 2 laser device that meets safety standard IEC @78=?*6

Laser projector standard: class 2 laser product Wavelength: 446 nm - 546 nm Wave source: 66.7mW or less Radiation angle: 71 ° Built-in laser standard: Class 4 laser module Wavelength: 446 nm - 546 nm Power: 1.6 W * 24 EA

Laser beam direction

Screen

Viewing direction

LASER RADIATION

DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT

- This laser projector is a Risk Group 2 device

" () @=J<6

standard.

Risk Group 2

CAUTION. Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye.

The label of this laser projector is attached to

the bottom of the product.

Odvhu#surmhfwru#odeho

MEZ38075821