LG RD17GQGD1 Owner’s Manual

www.lg.com/hkP/NO : MFL69020710
Rev01_012017
OWNER’S MANUAL
Please read this manual carefully before operating your set and retain it for future reference.
RD17GQGD1
DEHUMIDIFIER
1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 1
2
SAFETY PRECAUTIONS
ENGLISH
SAFETY PRECAUTIONS
The following safety precautions are intended to prevent accidental property damage and per­sonal injury through safe and correct use of the product.
WARNING
Failure to follow the instructions could result in death or serious injury of the user.
CAUTION
Failure to follow the instructions could result in personal injury or property damage.
WARNING
When installing the dehumidifier
• Do not damage, alter, excessively bend, twist, pull, pinch or heat the power cord.
If the power cord is damaged, request for repair to the service technician to prevent any risk. If not, it can cause fire, electric chock or product failure.
• Do not use multiple-outlet adaptors with this dehumidifier.
Excessive use of power could result in electric shock or fire.
• Do not use the product if the outlet is damaged or loose.
Doing so could result in electric shock or fire.
• If there is a gas leak, open the window for ventilation before using the dehumidifier.
Failure to do this could result in explosion, fire or burns.
• Do not disassemble, repair or modify the product.
Doing so could result in fire or electric shock.
• Do not store or use flammable gases or materials near the dehumidifier.
Doing so could result in fire or product malfunction.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by per­son responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
When using the dehumidifier
• Push the power plug all the way into the wall outlet so that it is not loose.
A loose connection could result in fire.
• Do not touch the power plug with wet hands.
Doing so could result in electric shock or injury.
• Do not modify or extend the power cord.
Doing so could result in fire or electric shock.
• If the product makes a strange noise or emits a smell or smoke, pull the power plug out and contact the service center.
Failure to do this could result in explosion, fire or burns.
• Avoid placing the dehumidifier or other heavy objects on top of the power cord.
Doing so could result in fire or electric shock.
• Do not use water to clean the dehumidifier.
Doing so could result in electric shock or malfunction.
!
!
!
1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 2
• Turn off the dehumidifier and empty the water tank before moving the dehumidifier.
The water could overflow from the tank, wetting household items or causing fire or electric shock.
• Pull out the power plug if you will not be using the product for an extended period.
Failure to do this could result in product malfunction or fire.
• Do not use the product in a very small space such as a closet.
Poor ventilation could result in overheating or fire.
• Do not use wax, thinner or a strong detergent when cleaning. Wipe the product using a
soft cloth.
Using inappropriate cleaning products could cause the product to become discolored or de­velop surface flaws.
• Do not use the product in direct sunlight or rain.
The product could overheat, causing fire or electric shock.
• Do not touch the product with wet hands.
Doing so could result in electric shock. Position the product on a firm, stable surface.
• If the product is on an unstable surface, it may vibrate and make noise.
If the product is tilted or laid down, the dehumidified water could overflow and the product could malfunction.
• Do not keep the power cord tied up when using the product.
The power cord could overheat, resulting in fire.
• Do not spray foreign substances or water into the sensor hole.
This could result in electric shock or malfunction.
• Do not use the product at unstable voltage for a long period of time.
The product may stop automatically to protect itself. This could result in electric shock or mal­function.
4
SAFETY PRECAUTIONS
ENGLISH
1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 4
1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 5
6
QUICK START
ENGLISH
Dehumidifier efficiency varies depending on room tempera­ture and relative humidity
• A lower temperature and lower relative humidity will reduce the moisture removal rate.
• The compressor operates in dehumidification mode only when the set humidity is lower than the
room humidity.
The operating temperature is 5°C to 32°C.
• The dehumidifier cannot be used at 0°C or below because the dehumidified water could freeze.
• At 32°C or higher, the dehumidifier may stop running automatically to protect itself from over-
heating.
The room temperature increases while the dehumidifier is running.
• This dehumidifier does not have temperature control functions.
• The dehumidifier generates heat while operating, raising the room temperature by about 2°C or
3°C depending on the usage conditions (room air pressure and room size).
The dehumidifier can be restarted after three minutes.
• If you attempt to restart the dehumidifier immediately after stopping it, the compressor will start
running again after about three minutes for product safety reasons.
QUICK START
1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 6
Start/stop button
Outlet
Louver
Display
Water tank lid
Water tank
It stores dehumidified water.
It adjusts
the direction
of the wind.
Antibiotic ultra-fine filter
Wheels for moving
Power plug hanging part
Inlet
Hose cover
Power plug
It absorbs the air and
moisture in the room
8
NAME OF EACH PART
ENGLISH
Start/stop button It is used to start and stop the product operation.
Operation mode button It is used to switch to Smart dehumidification mode,
Jet dehumidification mode, Silent dehumidification mode, Spot drying mode, and Laundry drying mode. Smart dehumidification → Jet dehumidification → Silent dehumidification → Spot drying → Laundry drying → Smart dehumidification
Ionizer button It is used to remove harmful bacteria in the air.
When you press the button for 3 seconds, lock function is operated.
Humidity control button It controls the desired humidity. (30%~70%)
Humidity control can be set in the units of 5%.
Wind strength control button It controls the wind strength.
When you press the button for 3 seconds, Wi-Fi pairing is operated.
OFF timer button The product will be turned off after the set time.
When the button is pressed, it is increased by 1 hour each time, and you can set up to 8 hours.
Light button It is used to turn on the LED light at the left side of the
water tank.
Operation mode lamp It displays the currently set operation mode.
Humidity & Off timer display
It displays the current humidity and set humidity. When Off timer is set, it displays the Off timer time, and it automatically displays the current humidity after completing the setting.
Wi-Fi indicator lamp It is displayed when Wi-Fi function is set.
Timer indicator lamp It is displayed when timer is set in Wi-Fi app.
Set indicator lamp It is displayed when humidity is set.
Display Panel
1,MFL69020710,영어 2017. 8. 21. 오후 7:00 페이지 8
Operation mode
Start/stop
Timer indicator lamp
Humidity
control
Wind strength
control
Wind strength
lamp
Ionizer
Operation mode
lamp
Humidity &Off timer
display
Wi-Fi
indicator lamp
OFF timer
Bucker full
indicator lamp
Light
Loading...
+ 18 hidden pages