LG PQNUD1S40 QUICK CONFIGURATION GUIDE

P/NO : MFL69157006

QUICK GUIDE

AIR CONDITIONER

www.lg.com

Please read this installation manual completely before installing the product. Installation work must be performed in accordance with the national wiring standards by authorized personnel only. Please retain this installation manual for future reference after reading it thoroughly.

PDI (PDI Premium) PQNUD1S40 Original instructions

For more information, Refer to the CD or LG Web site (www.lg.com).

[Representative] LG Electronics Inc. EU Representative : LG Electronics European Shared Service Center B.V.

Krijgsman 1, 1186 DM Amstelveen, The Netherlands

[Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro, Seongsan-gu, Changwon-si,

Gyeongsangnam-do, KOREA

MALTI

PORTUGUÊS

ENGLISH

SLOVENČINA

SLOVENŠČINA

LATVIEŠU VALODA

LIETUVIŲ KALBA

GAEILGE

МАКЕДОНСКИ

ITALIANO ESPAÑOL FRANÇAIS DEUTSCH

MAGYAR

БЪЛГАРСKИ

SRPSKI

HRVATSKI

ΕΛΛΗΝΙΚΆ

SVENSKA

ČEŠTINA

NORSK

NEDERLANDS

SUOMI

SHQIP

ÍSLENSKA

BOSANSKI

POLSKI

DANSK

LIMBA ROMÂNĂ

EESTI KEEL

SAFETY PRECAUTIONS

ENGLISH

SAFETY PRECAUTIONS

• This product must be installed by an installation professional from an LG authorized service center.

• Any issues stemming from an installation by an unauthorized person is the responsibility of the user and will not be covered by warranty.

• The following safety precautions are to prevent any unforeseen dangers or damage.

• This product has been designed for business use, or for areas outside the home, and has passed the Electromagnetic Interference Test.

WARNING

It can result in serious injury or death when the directions are ignored.

CAUTION

It can result in minor injury or product damage when the directions are ignored.

WARNING

Installation

• To reinstall the product, please contact the dealer from where you purchased the product, or a service center for reinstallation service.

- Installation of the product by an unauthorized person may result

in fire, electric shock, explosion, injury, or a malfunctioning of the product.

• Do not twist or damage the power cord.

- It may cause fire or electric shock.

• For electrical work, please contact the dealer from where you purchased the product, or a service center.

- Disassembly or repair by an unauthorized person may result in

fire or electric shock.

• Install the product in an area shielded from rain.

- If water gets into the product, it may malfunction.

• Do not install the product in a humid area.

- If the product is damp, it may malfunction.

SAFETY PRECAUTIONS

• For installation of the product, please contact the dealer from where you purchased the product, or a service center.

- Installation of the product by an unauthorized person may result

in fire, electric shock, explosion, injury, or a malfunctioning of the product.

• For electrical work, please have an electrician do the work based on the installation manual and specified circuit diagram.

- Using an unsuitable cord, or having a non-professional work on

the electricals may result in fire or electrical shock.

• Do not place the product near a fire source.

- It may result in the product catching fire.

• If the product is installed in a hospital or a communication base station, provide sufficient protective equipment against electrical noise.

- The product may malfunction or other products may work abnor-

mally.

• Securely install the product.

- If the product is not secured during installation, it may fall or mal-

function.

• Read the manual thoroughly to correctly install the product.

- If not, an incorrect installation may cause fire or electric shock.

• When wiring the product, do not use a non-standard cable, nor extend the cable excessively.

- It may cause a fire or electric shock.

• Securely install the power cord and communication cable.

- An unsecure installation may result in a fire or electric shock.

• Do not connect the power cord to the communication terminal.

- It may cause a fire, electric shock, or a product malfunction.

• Do not install the product in an area near combustible gas.

- It may result in fire, electric shock, explosion, injury, or a malfunc-

tioning of the product.

• Always ground the product.

- There is risk of fire or electric shock.

ENGLISH

Use

• Do not place a heavy object on the power cord.

- It may cause a fire or electric shock.

• Do not change or extend the power cord arbitrarily.

- It may cause a fire or electric shock.

• Use the cord specific to the product.

SAFETY PRECAUTIONS

ENGLISH

- Using an unauthorized non-standard cord may result in a fire or electric shock.

• Do not use a heat device near the power cord.

- It may cause a fire or electric shock.

• Ensure that water never gets into the product.

- It can result in an electric shock, or the product may malfunction.

• Do not place any container with liquid on the product.

- The product may malfunction.

• Do not touch the product with wet hands.

- It may cause a fire or electric shock.

• Use standard components.

- Use of an unauthorized product may result in fire, electric shock, explosion, injury, or a malfunctioning of the product.

• If the product has been submerged in water, you should contact a service center.

- It may cause a fire or electric shock.

• Do not shock the product.

- The product may malfunction.

• Do not store or use any combustible gas or flammable substances near the product.

- It may cause a fire, or a product malfunction.

• Do not disassemble, repair, or revamp the product arbitrarily.

- It may cause a fire or electric shock.

• Children and the elderly should use the product under the supervision of a guardian.

- Carelessness may cause an accident, or the product to malfunc-

tion.

• The guardian should prevent children from accessing the product.

- The product may be damaged or it may fall, causing injury to chil-

dren.

• Keep in mind the operating temperature range specified in the manual. if there is no operating temperature range in the manual, use the product between 0 °C ~ 40 °C (32 °F ~ 104 °F).

- If the product is used outside this range, the product may be

severely damaged.

• Do not press the switch or button with a sharp object.

- It can result in an electric shock, or the product may malfunction.

• Do not wire the product while it is turned on.

- It may cause a fire or electric shock.

SAFETY PRECAUTIONS

• If the product sounds or smells different, stop using the product.

- It may cause a fire or electric shock.

• Do not place a heavy object on the product.

- The product may malfunction.

• Do not spray water on the product, or clean it with a water-soaked cloth.

- It may cause a fire or electric shock.

• Do not use the product for the preservation of animals and plants, precision instruments, art pieces, or for other special purposes.

- It may cause property damage.

• Dispose the packing material safely.

- The packing material may result in personal injuries.

CAUTION

Installation

• Securely install the product in an area where the weight of the product can be supported.

- The product may fall and be destroyed.

• Do not use the product where there is oil, steam, or sulfuric gas.

- It may effect the product's performance, or damage it.

• Check the rated power capacity.

- It may cause a fire, or a product malfunction.

• Use the adaptor provided with the product or power from a class 2 24 V~ transformer, depending on model.

- If a non-standard adaptor is used, the product may malfunction.

The adaptor is not provided with the PDI package sold in the U.S.

• Be careful not to drop or damage the product when moving it.

- The product may malfunction or the person may sustain an

injury.

• Ensure that the cord is connected securely to prevent dew, water, or insects from getting into the product.

- If a foreign substance gets inside, it may cause an electric shock

or the product may malfunction.

ENGLISH

Use

• Clean the product with a soft cloth, but not with a solvent-based detergent.

- The use of a solvent-based detergent may cause a fire or deform

the product.

• Do not touch the panel using a pointy or sharp object.

SAFETY PRECAUTIONS

ENGLISH

- It can result in an electric shock, or the product may malfunction.

• Do not let the product come into contact with a metal substance.

- The product may malfunction.

• When sterilizing or disinfecting, stop using the product.

- The product may work abnormally.

• Do not touch inside the product.

- The product may malfunction.

• Check the condition of the product after using the product for an extended period of time.

- If the product is used for an extended period of time, the prod-

uct's condition may be worsen, causing injury to the user.

• Do not leave the product near a flower base, water bottle, or any other liquids.

- It may cause a fire or electric shock.

• If the liquid crystal of the product is broken, please do not let your skin such as face or hands contact with.

- Personal injury or property damage may occur.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Appliance shall be disconnected from its power source during service and when replacing parts.

According to IEC 60335-1 This appliance is not intended for use by person (including chil-

dren) with reduced physical, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

According to EN 60335-1 This appliance can be used by children aged from 8 years and

above and person with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

+ 13 hidden pages