LG PK7L OWNER’S MANUAL

MFL70424105
OWNER’S MANUAL
Portable Bluetooth Speaker
Please read this manual carefully before operating your set and retain it for future reference.
PK7 PK7L
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved
Getting Started2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.
WARNING: Do not install this equipment in a conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
Getting Started 3
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or the other surface of the product.
CAUTION when using this product in environments of low humidity
yIt may cause static electricity in environments of
low humidity.
yIt is recommended to use this product after
touching any metal object which conducts
electricity.
For models using an adapter
Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
1
Getting Started
Getting Started4
This device is equipped with a portable battery or accumulator.
How to Safely remove the batteries or the battery pack from the equipment: To Remove the
1
old batteries or battery pack, follow the assembly
Getting Started
steps in reverse order. To prevent contamination of the environment and bring on possible threat to human and/or animal health, the old batteries or the battery pack must be put in an appropriate container at designated collection points. Do not dispose of batteries or battery pack together with other waste. It is recommended that you use local, free reimbursement systems batteries or battery packs, (may not be available in your area). The batteries or the battery pack should not be exposed to excessive heat such as sunshine, re or the like.
Symbols
~
0
1
!
Refers to alternating current (AC).
Refers to direct current (DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents
1 Getting Started
2 Safety Information 6 Unique features 6 Introduction 7 Front
8 Rear
2 Operating
9 Charging the speaker 9 – Charging with the AC adapter 9 – Checking the charging status 10 – Checking Battery status 11 Basic Operations 11 – Using power button 11 – Bluetooth Connection 11 – Bluetooth LED status 12 – Simple Operation Guide 13 Handsfree Function 14 Voice Command 15 Mood light 16 Sound Effect 16 – Setting Sound effect 17 Listening to Music from Your External Device 18 Using BLUETOOTH® wireless technology 18 – Listening to music stored on the
BLUETOOTH devices
21 Multi phone pairing 23 Using the Music Flow Bluetooth App 23 – About “Music Flow Bluetooth” App 23 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
24 – Activate Bluetooth with “Music Flow
Bluetooth” App 25 Dual Play Connection (Optional) 27 Other Operation
27 – Resetting
27 – Turn on/off the beep sound 27 – Notice for Auto Power Off
3 Troubleshooting
28 Troubleshooting
4 Appendix
29 Trademarks and Licenses
29 Handling the Unit
30 Specifications
Table of Contents 5
1
2
3
4
Getting Started6

Unique features

Auto Power Off
1
Getting Started
This unit supports to turn off by itself for saving energy consumption. (Page 27)
Portable In
Listen to music from your portable device. (Smart phone, Notebook, etc.)
BLUETOOTH®
Listen to music stored on your Bluetooth device.
Music Flow Bluetooth
Music Flow Bluetooth is an app designed to let you take control of some of LG’s latest audio devices.
(Page 23-24)
Dual Play (Optional)
You can enjoy the sound in stereo by using two speakers. For enjoying Dual play, you need to purchase another speaker. (Available PK series model: 5, 7)

Introduction

Symbol used in this manual
Note
,
Indicates special notes and operating features.
Caution
>
Indicates cautions for preventing possible damages from abuse.
Caution
>
Water-proof (IPX5)
This speaker is water-proof according to IPX5. IPX5 is “Degrees of protection against ingress of water” However, this system is not completely water-tight. Avoid the cases below.
yDo not use unit under water or other liquid.
yWhen battery is charging, do not expose the
unit to water.
yWhen port is exposed to water, wipe off it
with a soft dry cloth. Thoroughly dry it before using the speaker.
yPorts are not water-proof. Make sure close
the port cover securely. Refer to below image.
- Position port cover onto a and securely press it in b.
The water resistant performance of the system is based on our measurements under the conditions herein described. Note that malfunctions as a result of water immersion caused by misuse by the customer are not covered by the warranty.

Front

Getting Started 7
b c d e f
a
g h i j k l m n
Battery LED
a
Power LED
b
Bluetooth LED
c
CLEAR VOCAL LED
d
ENHANCED BASS LED
e
Microphone
f g
1
Turns On / Off: Press it.
h j
- Adds a Bluetooth device for multi phone pairing. (Press and hold j for 2 seconds)
- Changes to Bluetooth mode in portable mode.
(Press j)
* When you connect the portable cable, the
function is changed to portable mode.
: Turn down the volume.
i P
: Turn up the volume.
j O
r ea l
Enhanced
C
l
a
c
Bass
Vo
k N
- Plays, pauses or skips playback on the Bluetooth mode. (Page 12)
- Receives a call on the Bluetooth device.
(Page 13)
- Mutes the sound on the portable mode.
(
l .
)
- Use voice command of your smart device. (Page 14)
- Changes mood light. (Press and hold
CLEAR VOCAL
m
for 2 seconds) (Page 15)
- Changes sound effect. (Page 16)
ENHANCED BASS
n
- Changes sound effect. (Page 16)
1
Getting Started
1
Getting Started
Getting Started8

Rear

a
b c d e f
Port cover
a
DC IN
b
AC adapter input
PORT.IN
c
Listens to music from your portable device.
RESET button
d e 3
Connects two speakers for dual play.
(Page 25-26)
Dual Play LED
f
Operating 9
Green Off

Charging the speaker

Charging with the AC adapter

This speaker uses built-in battery. Before using it, charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter input.
3. Plug the AC power cord into an AC outlet.

Checking the charging status

When speaker's battery is charging, you can check the charging status by Battery LED.
LED Description
Green Off
Red
,
yIf you listen to the music while charging, it will
take longer to charge.
yWhen the speaker is not charging by
overheating, Battery LED turn on red and amber alternately. And charging is stopped.
yWhen the speaker’s battery is fully charged,
the Battery LED turn on green for 15 seconds and then off.
Battery is fully charged.
Battery is charging.
Note
2

Operating

Note
,
Operating time is approx. 22 hours. It is based on what fully charged the battery, continuous playback using 50 % volume level and turning off mood light and equalizer functions. It may vary depending on the battery status and operational conditions.
Caution
>
Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. If you do not use this adapter, charging is unavailable or charging time may differ. And it may cause damage to the device and void your warranty.
Operating10
70 %
Green
70 % 10 %
Green
Amber
70 % 10 % 10 %

Checking Battery status

If the power turned on, you can check the charging status by pressing the 1 button for 2 seconds. Then Battery LED light will change depending on battery charging status.
LED Description Status
2
Operating
Battery LED turns on green.
Green
Battery LED turns
Amber
on amber.
Battery LED
continuously blinks in red with
Red
the sound.
Note
,
yThe Battery LED turn on for 3 seconds, after
the 1 button press for 2 seconds.
yChecking Battery status is not checked when
the speaker is charging.
yIf the speaker is connected to your
smartphone, you can check the battery status on “Music Flow Bluetooth” app. It may vary from actual battery capacity. (Only Android)
Loading...
+ 21 hidden pages