LG PC14 User manual

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

SLOVENŠČINA

ITALIANO

ESPAÑOL

∂§§H¡π∫A

PORTUGUÊS

PC14-UD_DDEULL_ENG_6118

PC14 (PC14-UD)

P/NO : MFL42956118

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE

COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.

CAUTION:

This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference.

Shall the unit require maintenance, contact an authorized

service center. Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus

shall not be exposed to water (dripping or splashing)

and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized service
center. Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it
means theproduct is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.

This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.

European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : [phone])

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

3

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

Contents

Hooking up the Unit (Back Panel) 4

Main Unit 5

Remote control 6

Listening to CDs 7

Using an iPod 8

Listening to music from your portable device 9

Enjoying a pre-programmed sound field 9

Listening to the radio 10

Setting the Clock 11

Using an USB device 12

Recording to USB 13

Troubleshooting 14

Specifications 15

iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.

• “Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.

• Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards

4

Hooking up the Unit (Back Panel)

Plug the power Cord into a wall socket

a. Before connecting the AC power

cord, check whether the operating
voltage of your unit is identical with
the voltage of your local power
supplied.

b. Conn.ect one end of the AC power

cord (supplied) to the AC IN socket
located at the backside of your unit.

c. Plug the other end into the wall

outlet.

PHONES (Headphone jack)

Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will
switch off the speakers.

5

Main Unit

CLOCK

(For setting the clock and checking the time.).

BB/xx

Play/ Stop.

USB REC

Recording to USB.

ALARM 1, 2

With the ALARM function you can turn CD, iPod, USB

play and radio reception on at a desired time.

(See use your unit as an alarm clock)

EJECT

Ejects or inserts the CD from the slot loader.

VOL. (vv/VV)

Control the volume when using any function.

TUN. -/+ / ./>

Scanning/ Tunning/ Searching

iPod Dock

11/]]

Turn on or off.

INPUT/FUNC.(function)

Selects the function.

CD Slot

• Do not push a disc forcibly into the CD slot.

• Do not pull or push a disc while a disc is ejected.

• Press EJECT again to reinsert the disc after ejecting it.

• pick it to the CD slot with the label side toward.

FM antenna

USB Port

SNOOZE/SET

Top controls

Front controls