LG PACS5A000 INSTALLATION INSTRUCTIONS
INSTALLATION MANUAL
CENTRAL CONTROLLER
<![endif]>TILI ZBEKO ʻ МОВА БЕЛАРУСКАЯ ТІЛІ ҚАЗАҚ УКРАÏНСЬКА ЯЗЫК РУССКИЙ ENGLISH
Please read this installation manual completely before installing the product. Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Please retain this installation manual for future reference after reading it thoroughly.
AC Smart 5
PACS5A000 Original instructions
[Representative] LG Electronics RUS B.9, 86 km of Minskoe highway,
Rural village Dorokhovskoe, Ruza District, Moscow Region, Российская Федерация, 143160
[Manufacturer] LG Electronics Inc. 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA
MFL70206506 |
www.lg.com |
Rev.01_010320 |
Copyright © 2019 - 2020 LG Electronics Inc. All Rights Reserved. |
<![endif]>ENGLISH
2 SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
•This product must be installed by an installation professional from an LG authorized service center.
•Any issues stemming from an installation by an unauthorized person is the responsibility of the user and will not be covered by warranty.
•The following safety precautions are to prevent any unforeseen dangers or damage.
•This product has been designed for business use, or for areas outside the home, and has passed the Electromagnetic Interference Test.
!WARNING
It can result in serious injury or death when the directions are ignored.
! CAUTION
It can result in minor injury or product damage when the directions are ignored.
! WARNING
Installation
•To reinstall the product, please contact the dealer from where you purchased the product, or a service center for reinstallation service.
-Installation of the product by an unauthorized person may result in fire, electric shock, explosion, injury, or a malfunctioning of the product.
•Do not twist or damage the power cord.
-It may cause fire or electric shock.
•For electrical work, please contact the dealer from where you purchased the product, or a service center.
-Disassembly or repair by an unauthorized person may result in fire or electric shock.
•Install the product in an area shielded from rain.
-If water gets into the product, it may malfunction.
•Do not install the product in a humid area.
-If the product is damp, it may malfunction.
•For installation of the product, please contact the dealer from where you purchased the product, or a service center.
-Installation of the product by an unauthorized person may result in fire, electric shock, explosion, injury, or a malfunctioning of the product.
•For electrical work, please have an electrician do the work based on the installation manual and specified circuit diagram.
-Using an unsuitable cord, or having a non-professional work on the electricals may result in fire or electrical shock.
•Do not place the product near a fire source.
-It may result in the product catching fire.
•If the product is installed in a hospital or a communication base station, provide sufficient protective equipment against electrical noise.
-The product may malfunction or other products may work abnormally.
•Securely install the product.
-If the product is not secured during installation, it may fall or malfunction.
•Read the manual thoroughly to correctly install the product.
-If not, an incorrect installation may cause fire or electric shock.
•When wiring the product, do not use a non-standard cable, nor extend the cable excessively.
-It may cause a fire or electric shock.
SAFETY PRECAUTIONS |
3 |
|
|
|
<![if ! IE]> <![endif]>ENGLISH |
||
• Securely install the power cord and communication cable. |
|||
|
|||
- An unsecure installation may result in a fire or electric shock. |
|
||
• Do not connect the power cord to the communication terminal. |
|
||
- It may cause a fire, electric shock, or a product malfunction. |
|
||
• Do not install the product in an area near combustible gas. |
|
||
- It may result in fire, electric shock, explosion, injury, or a malfunctioning of the product. |
|
||
Use
•Do not place a heavy object on the power cord.
-It may cause a fire or electric shock.
•Do not change or extend the power cord arbitrarily.
-It may cause a fire or electric shock.
•Use the cord specific to the product.
-Using an unauthorized non-standard cord may result in a fire or electric shock.
•Do not use a heat device near the power cord.
-It may cause a fire or electric shock.
•Ensure that water never gets into the product.
-It can result in an electric shock, or the product may malfunction.
•Do not place any container with liquid on the product.
-The product may malfunction.
•Do not touch the product with wet hands.
-It may cause a fire or electric shock.
•Use standard components.
-Use of an unauthorized product may result in fire, electric shock, explosion, injury, or a malfunctioning of the product.
•If the product has been submerged in water, you should contact a service center.
-It may cause a fire or electric shock.
•Do not shock the product.
-The product may malfunction.
•Do not store or use any combustible gas or flammable substances near the product.
-It may cause a fire, or a product malfunction.
•Do not disassemble, repair, or revamp the product arbitrarily.
-It may cause a fire or electric shock.
•Children and the elderly should use the product under the supervision of a guardian.
-Carelessness may cause an accident, or the product to malfunction.
•The guardian should prevent children from accessing the product.
-The product may be damaged or it may fall, causing injury to children.
•Keep in mind the operating temperature range specified in the manual. if there is no operating temperature range in the manual, use the product between 0 and 40 °C (32 and 104 °F).
-If the product is used outside this range, the product may be severely damaged.
•Do not press the switch or button with a sharp object.
-It can result in an electric shock, or the product may malfunction.
•Do not wire the product while it is turned on.
-It may cause a fire or electric shock.
•If the product sounds or smells different, stop using the product.
-It may cause a fire or electric shock.
•Do not place a heavy object on the product.
-The product may malfunction.
•Do not spray water on the product, or clean it with a water-soaked cloth.
-It may cause a fire or electric shock.
•Do not use the product for the preservation of animals and plants, precision instruments, art pieces, or for other special purposes.
-It may cause property damage.
<![endif]>ENGLISH
4SAFETY PRECAUTIONS
•Dispose the packing material safely.
- The packing material may result in personal injuries.
! CAUTION
Installation
•Securely install the product in an area where the weight of the product can be supported.
-The product may fall and be destroyed.
•Do not use the product where there is oil, steam, or sulfuric gas.
-It may effect the product's performance, or damage it.
•Check the rated power capacity.
-It may cause a fire, or a product malfunction.
•Be careful not to drop or damage the product when moving it.
-The product may malfunction or the person may sustain an injury.
•Ensure that the cord is connected securely to prevent dew, water, or insects from getting into the product.
-If a foreign substance gets inside, it may cause an electric shock or the product may malfunction.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
•Installation work must be performed in accordance with the national wiring standards by authorized personnel only. This equipment shall be provided with a supply conductor complying with the national regulation.
•The appliance is only to be used with the power supply unit provided with the appliance.
•The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
Use
•Clean the product with a soft cloth, but not with a solvent-based detergent.
-The use of a solvent-based detergent may cause a fire or deform the product.
•Do not touch the panel using a pointy or sharp object.
-It can result in an electric shock, or the product may malfunction.
•Do not let the product come into contact with a metal substance.
-The product may malfunction.
•When sterilizing or disinfecting, stop using the product.
-The product may work abnormally.
•Do not touch inside the product.
-The product may malfunction.
•Check the condition of the product after using the product for an extended period of time.
-If the product is used for an extended period of time, the product's condition may be worsen, causing injury to the user.
•Do not leave the product near a flower base, water bottle, or any other liquids.
-It may cause a fire or electric shock.
•If the liquid crystal of the product is broken, please do not let your skin such as face or hands contact with.
-Personal injury or property damage may occur.
•This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
•The appliance shall be disconnected from its power source during service and when replacing parts.
SAFETY PRECAUTIONS 5
Class A device
! NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
! CAUTION
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 PREPARATION
PREPARATION
The Installation Manual provides the necessary information regarding the components, installation and setting method of AC Smart 5 which the user should have a fair understanding/be aware of.
AC Smart 5 Overview
AC Smart 5 is a central controller installed in management room of a building or administration room of a school, which can monitor or control the operation of the IDU, ventilation, DI/DO, DOKIT, system boiler, AHU, and I/O module installed in each room of the building individually or by integration through touch screen.
AC Smart 5 is a single machine and can be connected to up to 128 devices (indoor unit, ventilation, DI/DO, DOKIT, system boiler, AHU). Or up to 64 devices (indoor unit, ventilation, DI/DO, DOKIT, system boiler, AHU) and 9 I/O modules.
Components
The following components are included in the package box. Open the box and verify that all components are included.
AC Smart 5
Wall installation |
Screw |
plate |
|
Power Cord |
Power Adapter |
Manual |
SD Card 8 GB |
! CAUTION
SD Card provided by LG is for the data backup and recovery when specialized service technician supports the service, so be careful not to lose it by using it for other purposes.
! CAUTION
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid potential hazards.
! NOTE
The schematics of the components and optionally purchased products shown may differ from the actual components and products.
Loading...