How it Works
LG
Loading...
OM5542A
User Guide
36 pgs3.32 Mb0
User Guide [es]
36 pgs3.18 Mb0

LG OM5542A User Guide

Download
OWNER’S MANUAL
Speaker System
ENGLISH
Please read this manual carefully before operating your set and retain it for future reference.
OM5542A
www.lg.com
Getting Started2
Safety Information
1
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a conned space such as a book case or similar unit.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built­in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
Getting Started 3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the equipment: Remove the
old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.
1
Getting Started
Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information 6 Unique Features 6 Accessories 7 Playable file Requirement 7 – Music file requirement 7 – Compatible USB Devices 7 – USB device requirement 8 Remote control 10 Front panel 12 Rear panel 13 Use of Tripod
2 Connecting
15 Optional Equipment Connection 15 – AUX IN Connection 15 – PORT. IN Connection 16 – USB Connection 16 – Antenna Connection
3 Operating
17 Basic Operations 17 – Searching for a folder 18 – Deleting an MP3/WMA file 18 – AUTO DJ playback 19 – Programmed Playback 19 – Deleting Programmed list 20 – LG Sound Sync 20 – AUTO POWER On 21 – Auto function change 21 Using a Bluetooth wireless technology 22 – Listening to music stored on the
Bluetooth devices 23 – Using Bluetooth App 25 Radio Operations 25 – Listening to the radio 25 – Improving poor FM reception 25 – Presetting the Radio Stations 25 – Deleting all the saved stations 26 Other Operations 26 – Turn off the sound temporarily 26 – Displaying file information
(ID3 TAG) 26 – DEMO 26 – Using Microphone 27 – Switching on and off the speaker light 28 Sound adjustment 28 – Setting the surround mode 28 – Setting the USER EQ 29 Setting the Clock 29 – Setting the Clock through “LG
Bluetooth Remote” App 29 – Using your player as an alarm clock 30 – Sleep Timer Setting 30 – Dimmer 30 – Auto power down 30 Advanced Operations 30 – Recording to USB
4 Troubleshooting
32 Troubleshooting
Table of Contents 5
5 Appendix
33 General specifications 34 Maintenance 34 – Handling the Unit 35 Trademarks and Licenses
1
2
3
4
5
Getting Started6
Unique Features
Bluetooth
1
Getting Started
Listens to music stored on your bluetooth device.
Portable In
Listens to music from your portable device. (MP3, Notebook, etc.)
USB Direct Recording
Records music to your USB device.
LG Sound Sync
Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync.
LG Bluetooth Remote
You can control this unit with your Android device via Bluetooth. This unit and your device must be paired for Bluetooth. Visit “Google Android Market (Google Play Store)” or use the QR code shown below to search for “LG Bluetooth Remote” app. For detailed information, refer to page 23-24.
Accessories
Please check and identify the supplied accessories.
Remote Control (1) Batteries (2)
FM Antenna (1) AM Antenna (1)
(Android OS)
Getting Started 7
Playable file Requirement
Music file requirement
MP3/WMA le compatibility with this unit is limited as follows.
yFile extensions : “.mp3”/ “.wma”
ySampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yBit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yMaximum les : Under 999
yMaximum folders : Under 99
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive :
Devices that support USB2.0 or USB1.1.
yThe USB function of this unit does not support
all USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than
a few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported. (Only
FAT(16/ 32) le system is supported.)
yThis unit is not supported when the total
number of les is 1,000 or more.
yExternal HDD, Card readers, Locked devices or
hard type USB devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.
1
Getting Started
Getting Started8
Remote control
1
Getting Started
• • • • • • • • • • a • • • • • • • • •
(Power) : Switches the unit ON or OFF.
1
FUNCTION : Selects the function and input source.
PRESETFOLDER W/S :
-Searches for a folder of MP3/WMA les. When a USB containing MP3/WMA les in several folders is being played, press PRESETFOLDER W/S to select the folder you want to play.
-Chooses a preset number for a radio station.
SOUND EFFECT : Chooses sound impressions.
MUTE @ : Mutes the sound.
VOL +/- : Adjusts speaker volume.
PROGRAM/MEMORY :
-Stores radio stations.
-Creates a playlist you want to listen to.
USB REC : USB direct recording.
SLEEP : Sets the system to turn off automatically at
a specified time. (Dimmer : The display window will be darkened by half.)
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert two (size AAA) batteries with 4 and 5 matched correctly.
Getting Started 9
• • • • • • • • • • b • • • • • • • • •
REPEAT (MENU) : Listens to your les repeatedly or randomly.
TUNING-/+ : Selects the radio stations.
C/V
Z
d/M
INFO : Sees informations about your music. An MP3 le often come with ID3 tag. The tag gives the Title, Artist, Album or Time information.
AUTO DJ : Selects the AUTO DJ mode. (For more information refer to the page 18)
DELETE :
:
-Skips Fast backward or Forward.
-Searches for a section within a le.
ENTER :
-Stops playback or recording.
-Cancels DELETE function.
:
-Starts or pauses playback.
-Deletes MP3/WMA les.
-Deletes a song on Programmed playback list.
• • • • • • • • • • c • • • • • • • • •
0 to 9 numerical buttons : Selects numbered les or preset number.
CLOCK : For setting the clock and checking the time.
REGION EQ : Chooses region equalizer.
• • • • • • • • • • d • • • • • • • • •
SET : Conrms the setting.
ALARM : With the ALARM function you can turn
USB play and TUNER reception on at a desired time.
1
Getting Started
Getting Started10
Front panel
1
Getting Started
a
b
g
h
i
j
c
d
e
f
k
l
m
n
o
Display window
a
MIC 1/2 jack
b
MIC VOL.
PORT. IN jack
(Power)
c 1/!
MASTER VOLUME
d
Adjusts speaker volume.
AUTO DJ
e
Selects the AUTO DJ mode. (For more informaion refer to the page 18)
X-FLASH LED
f
Getting Started 11
g
NFC allows you to install and open “LG Bluetooth Remote” app to NFC-enabled phone.
Remote control receiver
h i T
Starts or pauses playback.
I
Stops playback or cancels DELETE function.
Y/U
- Skips Fast backward or Forward.
- Searches for a section within a le.
USB 1/2 Port
j
You can play or record sound files by connecting the USB device.
k
USB REC
Records to USB.
FILE SEARCH
l
Selects a file on USB function.
BASS/MIDDLE/TREBLE
m
Adjusts the sound level when setting USER EQ.
BASS BLAST
n
Selects the BASS BLAST or BYPASS sound directly.
FUNCTION
o
Selects the function and input source.
USER EQ/DEMO
- Controls sound register.
- Shows demo.
X-FLASH/SET
- Selects a X-FLASH mode.
- Conrms the setting.
1
Getting Started
Rear panel
1
Getting Started
Getting Started12
Power cord
a
Vent Hole
b
AUX IN connectors (L/R)
c
ANTENNA (FM, AM)
d
a
b
c
d
Getting Started 13
Use of Tripod
You can mount the unit on a tripod. The tripod is optional purchase.
Caution
>
yExtend the tripod legs as much as possible
and tighten up the screw securely.
yBefore connecting with the unit, you must
x a tripod hard for not shaking.
1. Put down the unit to connect with the tripod.
2. After setting the tripod, insert a top of a recommended tripod to a hole underneath the unit.
3. Fix the unit to the tripod with the screw. Tighten up the screw underneath the unit.
1
Getting Started
4. Make the tripod stand upright carefully. When you make the tripod stand upright, you hold a body of the unit for avoiding unit’s toppling.
Safety pin
Caution
>
Use the safety pin for xing center column all the time.
Getting Started14
Getting Started
Note
,
yIf you use a tripod, use the tripod only for
speaker.
1
yBefore buying a tripod, check the
specications for maximum bearing load of the center column. (Unit’s net weight : about 16.5 kg)
35 mm
(B)
(A)
yUse tripod as below :
(A) From tripod’s center to tripod’s leg : above 530 mm (B) From top of tripod to bottom of tripod : below 780 mm (C) Tripod net weight : over 2.5 kg
yUse a tripod as low as possible for safety
use.
yYou should pull the center column to the
maximum only in case of need.
yMount only one unit on each tripod.
yDo not try to extent the tripod legs
outside over its allowed range.
yMake sure the tripod is correctly
assembled and all its components are tightly connected.
yDo not try to assemble the tripod if parts
are missing or defective.
yAfter installation, check whether the unit is
xed rmly on the tripod or not.
yDo not place the unit on an unstable
position where it might accidentally fall ove r.
yAdd weight such as sand bags around the
tripod legs to prevent them from falling ove r.
yYou should limit people around the
unit while using this unit with tripod. Otherwise it may result in malfunction and causing personal injury or property damage.
Note
,
yStanding on the stool to reach unit control
panel is risky and might lead to injuries.
yDo not put or attach other objects on the
tripod.
yDo not shake or push the unit when the
tripod is installed.
yRefrain from moving around the tripod
after unit is installed.
yRemove the units from all connected
cables of the tripods before moving the tripods or adjusting their height.
yWhen transporting or moving the unit,
always use two or more people.
yWhen you use the tripod, use an extension
cord. always be careful the movement of cable.
yIt is prohibited to use this unit outside.
(Indoor use only)
yDo not expose the unit to excessive
dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater) to prevent the possibility of panel disguration or damage to the internal components.
yWhen using the external input cable (Mic,
etc.) after installing the unit on the tripod, external input cable can cause the unit to fall down.
yWatch out the people can trip over the
input cable (Mic, etc.) connected the unit.
yAlways be careful of the unit being
tripped.
Connecting 15
Optional Equipment Connection
AUX IN Connection
Connect an output of auxiliary device(Camcoder, TV, Player, etc.) to the AUX IN (L/R) connector.
If your device has only one output for audio(mono), connect it to the left (white) audio jack on the unit.
Audio cable
Rear panel
PORT. IN Connection
Connect an output (earphone or line out) of portable device (MP3 or PMP, etc.) to the PORT. IN connector.
MP3 player etc.
Portable cable
2
Connecting
DVD, Blu-ray player, etc.
Listening to music from your portable player or external device
The unit can be used to play the music from many types of portable player or external device.
1. Connect the portable player to the PORT. IN connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1 on the remote control or
3. Select the PORTABLE or AUX function by pressing FUNCTION.
4. Turn on the portable player or external device and start it playing.
Note
,
If it is get over input than the input spec (refer to page 33), the unit might be o automatically to protect itself.
on the unit.
1/!
Connecting16
USB Connection
Connect a USB device (or MP3 player, etc.) to the USB ports on the unit.
USB device
2
Connecting
Note
,
Removing the USB device from the unit :
1. Choose a different function/mode or press Z ENTER on the remote control or I on the unit twice in a row.
2. Remove the USB device from the unit.
Antenna Connection
Connect the supplied FM/AM antenna for listening to the radio.
Connect the AM loop antenna to the AM antenna connector.
Connect the FM wire antenna to the FM antenna connector.
AM antenna
FM antenna
Rear panel
Note
,
yTo prevent noise pickup, keep the AM Loop
antenna away from the unit and other components.
yBe sure to fully extend the FM wire antenna.
3 Operating
Operating 17
Basic Operations
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION on the remote control or on the unit.
To Do this
Stop
Playback
Pause
Searching
for a section
within a le
Selecting a le directly
Skipping to
the next/
previous le
Playing
repeatedly or
randomly
yWhen you play Program list, only RPT 1 and
RPT ALL are available.
yEven after restarting the unit or swithching
one function to another, you can listen to music from the point where it’s last been played.
Press Z ENTER on the remote control or I on the unit.
Press d/M on the remote control or T on the unit.
Press d/M on the remote control or T on the unit during playback.
Press C/V on the remote control or Y/U on the unit during playback and release it at the point you want to listen to.
Press 0 to 9 numerical buttons on the remote control to go to the desired le directly.
During playback,
(1) By using C/V buttons : Press C/V to go to the next le or to return to the beginning of the current le. Press C twice briey to step back to the previous le.
(2) By using FILE SEARCH knob : Rotate FILE SEARCH and press
to play the le.
d/M
Press REPEAT(MENU) on the remote control repeatedly, the display will be changed in the following order. RPT1 -> RPT DIR -> RPT ALL -> RANDOM -> OFF
Note
,
*DIR : Directory
Searching for a folder
1. Press PRESET·FOLDER W/S on the remote control repeatedly until a desired folder appears in the display window.
2. Press d/M to play it. The first file of the folder will be played.
Note
,
yUSB Folders/Files are recognized as below.
ROOT
FOLDER1
FOLDER3
FOLDER4
FILE 3
FILE 4
FOLDER2
FOLDER5
FOLDER6
FILE 1
FILE 2
FILE 5
FILE 6
FILE 7
FOLDER7
FOLDER8
FILE 11
FILE 12
FILE 13
FILE 14
yIf there is no le in a folder, the folder will
not appear.
yFolders will be presented as the following
order; ROOT
FOLDER 1 FOLDER 3 FOLDER
7 FOLDER 8 FOLDER 5 FOLDER 6
yFile will be played from $ le No.1 to $ le
No.14 one by one.
yFiles and folders will be presented in order
recorded and may be presented dierently according to the record circumstances.
y*ROOT : The rst screen you can see when a
computer recognize the USB is “ROOT”.
FOLDER
FILE
FILE 8
FILE 9
FILE 10
3
Operating
Operating18
Deleting an MP3/WMA file
You can delete file, folder or format by pressing DELETE. This function is supported only in stop status. (USB only)
1. - Select the file you want to delete and press DELETE on the remote control.
- Press and hold DELETE to format the USB device.
Or
Press DELETE repeatedly during selecting the MP3/WMA file.
The display changes in the following order.
3
Operating
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
2. To delete file/folder or format, press d/M on the
remote control or press T on the unit.
3. If you want to exit the current mode, press
ENTER on the remote control or press I on
Z
the unit.
Caution
>
yDo not extract the USB device during
operation. (play, delete, etc.)
yRegular back up is recommended to
prevent data loss.
yThe delete function may not be supported
according to the USB status. (lock etc.)
AUTO DJ playback
Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across les for uninterrupted playback.
Press AUTO DJ on the remote control or unit repeatedly, the display changes as followings. RANDOM (AUTO DJ RANDOM) -> REPEAT ALL (AUTO DJ SEQUENTIAL) -> (AUTO DJ OFF)
Mode
OFF
RANDOM
REPEAT
yIt is not supported on the AUTO DJ mode
to search for a section within a le or to play repeatedly or randomly.
yIf you move to other functions or stop the
music using I on the unit (or Z ENTER on the remote control) on AUTO DJ mode, AUTO DJ function will be disable.
yAUTO DJ function is not supported in the
music le whose length is less than 60 seconds.
yDuring recording, AUTO DJ function is not
available.
yOnly AUTO DJ SEQUENTIAL is selected
when played Program list.
Display
Window
(AUTO DJ OFF)
RANDOM (AUTO DJ
RANDOM)
(AUTO DJ
SEQUENTIAL)
Note
,
-
RPT
Description
-
The music is
played randomly
on this mode.
The music is
played repeatedly
on this mode.
Operating 19
Programmed Playback
The Program function enables you to make a playlist of your favourite les from the USB device. A playlist of up to 20 les can be entered for each media. (USB1,USB2) Possible to save a total of 40 les.
1. Press PROGRAM/MEMORY on the remote control in stop status.
2. Press C/V on the remote control to select a file.
3. Press PROGRAM/MEMORY to save and select a next file.
4. Repeat steps 2-3 to store other files. (You can modify the list by pressing PRESET·FOLDER W/S to select the program number.)
5. Press PROGRAM/MEMORY once again.
To play the programmed list, press make the list.
Note
,
When making or modifying the programmed list, REPEAT mode is o.
d/M
after you
Deleting Programmed list
Deleting function is worked only on the edit mode.
1. Press PROGRAM/MEMORY on the remote control in stop status.
2. Select a song by pressing PROGRAM/MEMORY or PRESET·FOLDER W/S repeatedly.
3. Press DELETE while a song is selected.
Note
,
yProgrammed list is cleared in the case
below.
-Removing the USB device.
-Deleting or recording music les in the USB device.
yProgram is switched o in the case below.
-Changing the function to the others.
-Turning o and on the unit.
-Operating the numeric buttons on the remote control.
3
Operating
Operating20
LG Sound Sync
You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV.
Controllable function by LG TV’s remote control : Volume up/down, mute
Refer to the TV’s instruction manual for the details of LG Sound Sync.
Make one of the following connections, depending
3
on the capabilities of your equipment.
Operating
Note
,
yYou can also use the remote control of
this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV.
yWhen the connections failed, make sure of
the condition of the TV and power of it.
yMake sure of the condition of this unit and
the connection in the cases below when using LG Sound Sync.
-Turned o the unit.
-Changing the function to the others.
-Disconnecting the wireless connection caused by interference or a distance.
yThe amount of time to turn o this unit is
di erent depending on your TV.
yIf you try to change the function on using
the LG TV function, volume will be change according to the LG TV volume level.
yThe device with Bluetooth® wireless
technology will be disconnected after a certain period of time, if Sound Sync function is selected. “LG Bluetooth Remote” app you’ve already connected is disconnected either.
With wireless connection
1. Turn on the unit by pressing 1 (Power) on the remote control.
2. Select LG TV function by using FUNCTION on the remote control until the function is selected.
3. Set up the sound output of TV to listen to the sound through this unit : TV setting menu [ [Sound] [ [TV Sound output] [ [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV” on the display window if connecting normally between this unit and your TV.
AUTO POWER On
This unit automatically turns on by an input source : LG TV or Bluetooth
If you try to connect your Bluetooth device, this unit turns on and connect your Bluetooth device. You can play your music.
Note
,
yDepending on the connected device, this
function may not operate.
yDepending on the connected device, the
unit turns on but Bluetooth function may not connected.
yIf you disconnect Bluetooth connection
by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turning o the unit.
yIf you try to connect to the “LG Bluetooth
Remote” app, Bluetooth function of this unit is turned on. (It also includes the connection to the “LG Bluetooth Remote” app via NFC. )
yIf you turn on the unit using LG TV or
Bluetooth function, proper function of this unit is turned on.
Operating 21
Auto function change
This unit recognizes the connection to the Bluetooth or to the “LG Bluetooth Remote” app via NFC and changes suitable function automatically.
Note
,
yIf you are using LG TV function, this unit
does not react to the Bluetooth connection.
yOn the USB REC or USB delete function,
if you try to connect Bluetooth/ * NFC, USB REC or USB delete function does not support Auto function change.
yIf the unit is not paired with Bluetooth, it
does not support Auto function change. (Except * NFC)
yOn the ready status of LG TV connection,
if Bluetooth device connect to the “LG Bluetooth Remote” app directly, the unit change to the Bluetooth function.
y* NFC : Connection to the “LG Bluetooth
Remote” app via NFC.
Using a Bluetooth wireless technology
About Bluetooth
Bluetooth® is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA.
Bluetooth Profiles
In order to use Bluetooth® wireless technology, devices must be able to interpret certain proles. This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
3
Operating
Operating22
Listening to music stored on the Bluetooth devices
Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again.
1. Select the Bluetooth function by using the FUNCTION. “BT READY” appears on the display window.
2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices
3
Operating
found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG MINI(XX:XX)” .
Note
,
XX:XX means the last four digits of BT address. For example, if your unit has a BT address such as 9C:02:98:4A: MINI(
F7:08
3. Enter the PIN code. PIN code : 0000
4. When this unit is successfully connected with your Bluetooth device, “BT PAIR” will appear on the display window and bluetooth indicator will be lit up.
Note
,
Depending on the Bluetooth device type, some device have a dierent pairing way.
5. Listen to music. To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide. According to your mobile phone’s volume level, the volume level of Bluetooth will be adjusted.
Note
,
ySound from the main set can be distorted
if you raise the volume of Bluetooth device up to two-thirds or more.
yWhen you use the bluetooth function,
adjust the volume of a bluetooth device to a proper level to listen to.
F7:08
)” on your Bluetooth device.
, you will see “LG
Note
,
yWhen using Bluetooth® technology, you
have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below :
-There is a obstacle between the unit and the bluetooth device.
-There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device.
yYou should connect your Bluetooth device
to this unit again when you restart it.
yThe sound may be interrupted when
the connection interfered by the other electronic wave.
yYou cannot control the Bluetooth device
with this unit.
yPairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yDepending on the type of the device,
you may not be able to use the Bluetooth function.
yYou can enjoy wireless system using phone,
MP3, Notebook, etc.
yWhen not connected the Bluetooth, “BT” and
“BT READY” appears on the control panel.
yWhen someone stands and interrupts
communication between Bluetooth device and the player, the connection will be disconnected.
yThe more distant between the unit and
the bluetooth device, the lower the sound quality becomes.
yWhen Bluetooth connection is
disconnected, connect the bluetooth device to the unit again.
Operating 23
Using Bluetooth App
Note
,
Only Android OS is available to use “LG Bluetooth remote” app with this unit.
About “LG Bluetooth Remote” App
“LG Bluetooth Remote” app brings a suite of new features to this unit.
To enjoy more features, you are recommended to download and install free “LG Bluetooth Remote” app.
Install “LG Bluetooth Remote” App onto Your Bluetooth Device
1. Install “LG Bluetooth Remote” app through QR code. Use the scanning software to scan the QR code.
(Android OS)
2. Tap an icon for installation.
3. Tap an icon for downloading.
Note
,
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device has a
scanning software application. If you don’t have one, download one from “Google Android Market. (Google Play Store)”
Install “LG Bluetooth Remote” App through “Google Android Market (Google Play Store)”
1. Tap the “Google Android Market (Google Play Store)” icon.
2. In the search bar, type in the “LG Bluetooth Remote” and search it.
3. In the search result list, find and tap “LG Bluetooth Remote” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
Note
,
yMake sure that your Bluetooth device is
connected to the Internet.
yMake sure that your Bluetooth device is
equipped with “Google Android Market (Google Play Store)”.
3
Operating
Operating24
Install “LG Bluetooth Remote” App through NFC
NFC allows you to install and open “LG Bluetooth Remote” app to NFC-enabled phone.
1. Activates the NFC feature of your NFC-enabled phone.
2. Turn on the unit.
3. Tag the back of your NFC-enabled phone over the unit.
3
Operating
-If “LG Bluetooth Remote” app is not installed on your NFC-enabled phone, the linked screen with “LG Bluetooth Remote“ app is displayed.
Note
,
yYou must activate the NFC feature of your
NFC-enabled phone.
yIf your NFC-enabled phone’s screen is
locked, it will not read the NFC.
yIf your smart phone case is plated with
chrome, NFC is unavailable. Depending on your case’s material or thickness, NFC may not be read well.
yIf “LG Bluetooth Remote” app is already
installed in your NFC-enabled phone, it will display the screen for choosing to activate “LG Bluetooth Remote” app.
yAfter tagging, it automatically connect to
the “LG Bluetooth Remote” app and then change to the Bluetooth function.
Activate Bluetooth with “LG Bluetooth Remote” App
“LG Bluetooth Remote” app helps to connect your bluetooth device to this unit.
1. Tap “LG Bluetooth Remote” app icon on the home screen to open “LG Bluetooth Remote” app and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate, tap [Setting] and [Help].
Note
,
yBT app will be available in the software
version as follow;
- Android O/S : Ver 2.3.3 (or later)
yThis unit does not support the multi-pairing.
If this unit is already connected with other Bluetooth device, disconnect that device and then try again.
yIf you use “LG Bluetooth Remote” app for
operation, there would be some dierences between “LG Bluetooth Remote” app and the supplied remote control. Use the supplied remote control as necessary.
yDepending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
yThe connection you’ve made may be
disconnected if you select other application or change the setting of the connected device via “LG Bluetooth Remote” app. In such a case, please check the connection status.
yAfter connection of Bluetooth app, music
may be output from your device. In this case, try connecting procedure again.
Operating 25
Radio Operations
Be sure that both FM and AM antenna are connected. (Refer to the page 16)
Listening to the radio
1. Press FUNCTION until FM or AM appears in the display window. The last received station is tuned in.
2. Auto tuning : Press and hold TUNING-/+ on the remote control or seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station.
Manual tuning :
Press TUNING-/+ on the remote control or
Y/U
3. Adjust the volume by rotating volume knob on the unit or by pressing VOL +/- on the remote control repeatedly.
Y/U
on the unit repeatedly.
Improving poor FM reception
Adjust the antenna to improve the reception when the radio has poor reception.
on the unit for about two
Or
Presetting the Radio Stations
You can preset 50 stations for FM and AM. Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM or AM appears in the display window.
2. Press TUNING-/+ on the remote control or
Y/U
frequency.
3. Press PROGRAM/MEMORY. A preset number will blink in the display window.
4. Press PRESETFOLDER W/S to select the preset number you want.
5. Press PROGRAM/MEMORY. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESETFOLDER
W/S
on the unit to select a desired
or 0 to 9 numerical buttons.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two seconds. “ERASEALL” will flash up on the unit display.
2. Press PROGRAM/MEMORY to erase all the saved radio stations.
3
Operating
Operating26
Other Operations
Turn off the sound temporarily
Press MUTE@ on the remote control to mute your sound.
You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window.
To cancel it, press MUTE@again or change the volume level.
Displaying file information
3
(ID3 TAG)
Operating
While playing an MP3 le containing le information, you can display the information by pressing INFO.
DEMO
In the power o state, it demonstrates the function on display window and a display by pressing USER EQ/DEMO. To cancel the DEMO, press it again.
Note
,
While DEMO, this unit will keep DEMO
y
status even if you unplug the power cord connection.
You can enjoy other functions during
y
the DEMO. Then the DEMO will pause to temporary.
- Without input key in 10 sec, the DEMO will play back automatically.
Using Microphone
It is available on the function as follows : USB, Bluetooth, AUX, Portable-In, FM, AM, LG TV.
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the microphone volume by rotating MIC VOL. clockwise or unclockwise on the unit.
Note
,
yWhen not using the microphone, set the
MIC VOL. to minimum or turn o the MIC and remove the microphone from the MIC jack.
yIf the microphone is set too near the
speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC VOL.
yIf sound through the microphone is
extremely loud, it may be distorted. In this case, rotate MIC VOL. to minimum.
Switching on and off the speaker light
You can select various types of the speaker light by pressing X-FLASH/SET on the unit.
Press X-FLASH/SET on the unit repeatedly, the speaker lightening changes as followings. Red LED Lighting -> Red LED Off, White LED Blinking -> Red LED Lighting, White LED Blinking -> OFF
Step Lighting Description
OFF - -
Red LED Lighting,
Step1
Step2
Step3
White LED O
Red LED Off,
White LED
Blinking
Red LED Lighting,
White LED
Blinking
Note
,
yThe RED LED may not work properly
according to Low Input level or connected external device. (Low Volume, Device Type, Play sound source, connection mode, etc.)
yThe RED LED is the LED lights up only
during operation. (playback, USB playback, Radio Listening and other external input)
Depending on the
beat, the Red LED
is blinking.
Regardless of the
beat, the White LED is blinking.
Depending on the
beat, the Red LED
is blinking.
Regardless of the
beat, the White LED is blinking.
Operating 27
3
Operating
Operating28
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround sound elds. You can select a sound mode you want by using SOUND EFFECT on the remote control.
The displayed items for the Equalizer may be dierent depending on sound sources and eects.
3
Operating
On Display Description
NATURAL
Local
Specialization
equalizer
(optional)
AUTO EQ
POP
CLASSIC
JAZZ
ROCK
MP3 - OPT
You can enjoy comfortable and natural sound.
Regionally optimized sound eect. (FORRO/FUNK/ SERTANEJO/DANGDUT/ARABIC/ PERSIAN/INDIA/REGUETON/ MERENGUE/SALSA/SAMBA/ CUMBIA/AFRO)
Realizes the sound equalizer that is the most similar to the genre of which is included in the MP3 ID3 tag of song les.
This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual pop, classic, jazz or rock concert.
This function is optimized for compressible MP3 le. It improves the treble sound.
On Display Description
BOOST
TREBLE/BASS
(TRE/BASS)
BYPASS
,
yOn some speakers, sound may not be heard
or heard in low sound depending on the sound mode.
yBy pressing BASS BLAST on the unit you
can directly select the BYPASS or BASS BLAST sound.
yBy pressing REGIOEN EQ on the remote
control, you can directly select various latin equalizers.
Reinforce the middle register. It seems to boost the overall sound.
Emphasize low pitch sound and high pitch sound.
You can enjoy the sound without equalizer eect.
Note
Setting the USER EQ
You can listen to music with equalizer by adjusting the sound level yourself.
1. Press USER EQ/DEMO. “USER EQ” is displayed.
2. Turn the BASS, MIDDLE and TREBLE knobs to adjust the sound level.
3. To finish the setting, press X-FLASH/SET on the unit.
Note
,
Turning the knobs clockwise increases the level, counterclockwise decreases the level.
BASS BLAST
LOUDNESS
FOOT BALL
FLAT
Reinforces the treble, bass and surround sound eect.
Improves the bass and treble sound.
This program lends an atmosphere to the sound, giving you the feeling you are in football stadium.
You can enjoy neutral sound and give the impression that all the section is at.
Operating 29
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing the remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to confirm your selection.
5. Select the hours by pressing remote control.
6. Press SET.
7. Select the minutes by pressing the remote control.
8. Press SET.
C/V
C/V
C/V
Setting the Clock through “LG Bluetooth Remote” App
Install “LG Bluetooth Remote” app on your Android device. (see page 23 - 24)
Your unit’s clock will be automatically synchronized with your device by activating Bluetooth connection through “LG Bluetooth Remote” app.
on
on the
on
Using your player as an alarm clock
1. Turn the unit on.
2. Press and hold ALARM.
3. Press
C/V
change the hours and minutes and press SET to save.
4. Press
C/V
select function and press SET to save.
5. Press
C/V
change the volume and press SET to save. The clock icon “(“ shows that the alarm.
Note
,
yIf you set the clock time, you can check the
time by pressing CLOCK even when the player is turned o.
yIf you set the clock time and alarm, you
can check the alarm icon “(“ by pressing CLOCK even when the player is turned o.
yIf you set the clock time and alarm, you
can check the alarm icon “(“ and setting informaiton by pressing ALARM even when the unit is turned o.
yPress ALARM, you can selects a ALARM
on mode.
yAfter plug or unplug the power cord, it may
need a certain period of time to operate the unit smoothly.
on the remote control to
on the remote control to
on the remote control to
3
Operating
Operating30
Sleep Timer Setting
Press SLEEP repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned o.
To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed.
Note
,
yYou can check the remaining time before
the unit is turned o.
yPress SLEEP. The remaining time appears in
the display window.
3
Operating
Dimmer
Press SLEEP once. The display window will be darkened by half. To cancel it, press SLEEP repeatedly until dim o.
Auto power down
This unit will turn o itself to save electric consumption in the case were main unit is not connected to external device and is not used for 20 minutes. So does this unit after six hours since Main unit has been connected to other device using analogue input.
Advanced Operations
Recording to USB
You can record a various sound source to USB. (USB, AUX, PORTABLE, FM, AM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record by pressing FUNCTION.
One file recording. - You can record to USB after playing a file you want.
All files recording. - You can record to USB after stop.
Programmed Playback list recording. - After showing Programmed Playback list, you can record it to USB. (Refer to the page 19)
3. Start the recording by pressing USB REC on the remote control or USB REC on the unit.
- If you connect both USB1 and USB2, press
USB REC on the remote control or
USB REC on the unit when USB1 or USB2 which you want to record blinks in the display window.
4. To stop recording, press I on the unit or ENTER on the remote control.
Z
Note
,
You can record various sound using Mic. Output may dier depending on the Mic volume. (Only TUNER, AUX, PORTABLE)
Pausing recording
During recording, press d/M on the remote control or T on the unit to pause recording. Press it again to restart recording. (Only TUNER, AUX, PORTABLE)
To select recording bit rate
1. Press USB REC on the unit or USB REC on the remote control for longer than 3 seconds.
2. Press C/V on the remote control or
Y/U
3. Press USB REC on the unit or USB REC on the remote control to finish the setting.
on the unit to select a bit rate.
Dubbing USB to USB
You can do dubbing a various sound source in USB1 to USB2 on USB function.
1. Connect a USB device including desired sound files to USB1.
2. Connect another USB device to USB2.
3. Press USB REC on the unit or USB REC on the remote control.
4. To stop recording, press I on the unit or
ENTER on the remote control.
Z
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of copyrights and constitute a criminal oense. This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Operating 31
Note
,
yIt is not supported to record music stored
on bluetooth device.
yDuring recording MP3/WMA, there is no
sound.
yYou cannot record in AUTO DJ mode.
yWhen you stop recording during playback,
the le that has been recorded at that time will be stored. (Except MP3/WMA les)
yDo not remove the USB device or turn o
the unit during USB recording. If does not, an incomplete le may be made and not deleted on PC.
yIf USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window.
yMulti card reader device or External HDD
can not be used for USB recording.
yA le is recorded by about 512 Mbyte when
you record for a long term.
yYou may not store more than 999 les.
yIt’ll be stored as follows.
MP3/WMA
The other source* TUNER
3
Operating
TUNER : The current recording frequency is shown.
* : AUX, PORTABLE and the like.
4 Troubleshooting
Troubleshooting32
Troubleshooting
Problem Cause & Solution
yThe power cord is not plugged in. Plug in the power cord.
No Power.
yCheck whether electricity failed.
Check the condition by operating other electronic devices.
4
Troubleshooting
No sound.
The unit does not work properly.
Radio stations cannot be tuned in properly.
The remote control does not work properly.
No speaker light
LG Sound Sync does not work.
yCheck whether you select right function.
Press FUNCTION and check the selected function.
yTurn o the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplier, etc.) and turn it on again.
yDisconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplier, etc.) and then try connecting again.
yThe antenna is positioned or connected poorly.
Connect the antenna securely.
yThe signal strength of the radio station is too weak.
Tune to the station manually.
yNo stations have been preset or preset stations have been cleared. (when
tuning by scanning preset channels) Preset some radio stations, see page 25 for details.
yThe remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
yThere is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
yThe batteries in the remote control are exhausted.
Replace the batteries with new ones.
yCheck the speaker light eects by pressing X-FLASH/SET.
yCheck whether your LG TV supports LG Sound Sync.
yCheck connection of LG Sound Sync.
yCheck sound setting of your TV and this unit.
5 Appendix
General specifications
General
Power requirements Refer to the main label.
Power consumption Refer to the main label.
Dimensions (W x H x D) 395.5 mm x 548 mm x 446 mm
Net Weight (Approx.) 16.5 kg
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Bus Power Supply (USB) 5 V 0 500 mA
Inputs
AUX IN 1.2 Vrms (1kHz 0 dB 600  conector RCA L/R)
PORT. IN 0.8 Vrms (3.5 Ø jack L/R)
Mic 25 mV
Appendix 33
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range 522 to 1 620 kHz, 520 to 1 710 kHz or 522 to 1 710 kHz
Amplier
Total 500 W
Front Mono 500 W (at 1 kHz 3 )
THD 20 %
yDesign and specications are subject to change without notice.
5
Appendix
Appendix34
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the
5
unit.
Appendix
Trademarks and Licenses
Bluetooth® wireless technology is a system which allows radio contact between electronic devices.
Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology.
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
Appendix 35
5
Appendix
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use