Test Report No.: GETEC-E3-07-061
FCC Class B Certification
APPENDIX H
: USER’S MANUAL
EUT Type: LCD Monitor
FCC ID: BEJM4710CE
User’s Guide
M4710CE
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask for service.
Safety Precautions
Please read these safety precautions carefully before using the product.
Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
Caution If you ignore the caution message, you may be slightly injured or the product may be damaged
Precautions in installing the Product
Warning
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
-Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
-If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
- It can cause injury to human, problem to product and damage the display.
Caution
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
1
Safety Precautions
Electrical Power Related Precautions
Warning
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.
- It can cause electric shock.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate.
Caution
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
2
Safety Precautions
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
-If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair.
Precautions in Using the Product
Warning
Do not disassemble, repair or modify the product at your own discretion.
-Fire or electric shock accident can occur.
-Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
Caution
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
3
Using the Remote Control
Name of the Remote Control Buttons
•Mute button
•AV Button
•Input Select Button
(See next page)
•Menu Button
•Exit Button
•Volume Button
• Check Button
There is not a function which is supported
• ARC button
To select the image size of the screen.
• Power On/Off Button
• Sleep Button
When watching AV/S-Video/RGB/HDMI
• Component1/ Component2
The product will be automatically turned off after a certain period of time.
Press this button repetitively to select an appropriate time duration
•PSM Button
-Automatically adjusts the image. Press this button repetitively to set
the intended screen.
• Up and Down buttons
Bring up and down direction adjustment.
• Auto Button
Automatic adjustment function (Operational for the analog signal only)
• Video Operation Button
Applicable for LG products only
4
Using the Remote Control
• AV Button
Each time you press the Input button it will change to
AV Component1 Component2 RGB HDMI/DVI
• Input Select Button
If you press the button once, the following Input Signal
Window will appear. Select the signal type you want using thebutton.
Input
Inserting batteries into remote control.
1.Take out the battery cap.
2.Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
5
Name and Function of the Parts
* The product image in the user’s guide could be different from the actual image.
Rear View
REMOTE |
RS-232C |
HDMI/DVI IN |
RGB IN |
AUDIO |
COMPONENT IN |
|
AV IN |
CONTROL IN |
(CONTROL& |
|
|
(RGB/DVI) |
L-AUDIO-R |
VIDEO |
L-AUDIO-R |
|
SERVICE) |
|
|
|
|||
|
OUT |
|
RGB OUT |
|
1 |
|
|
|
IN |
|
|
|
2 |
|
AV |
|
|
|
|
|
OUT |
REMOTE |
RS-232C |
HDMI/DVI IN |
RGB IN |
AUDIO |
|
COMPONENT IN |
|
|
AV IN |
CONTROL IN |
(CONTROL& |
|
|
(RGB/DVI) |
VIDEO |
L-AUDIO-R |
VIDEO |
L-AUDIO-R |
|
|
SERVICE) |
|
|
Y |
PB |
PR |
|||
|
OUT |
|
RGB OUT |
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S-VIDEO |
|
IN |
|
|
|
|
2 |
|
|
AV |
|
|
|
|
|
|
|
OUT |
||
|
|
|
|
|
|
|
|
|
Power Connector : Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
RGB, HDMI/DVI Ports
PC Sound Jack
: Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Ports
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual).
6
Connecting to External Devices
When Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable.
A When connecting with the D-Sub signal input cable.
B When connecting with the HDMI to DVI signal input cable (not included).
A
RGB IN
PC
Rear side of the product.
|
MAC |
PC/MAC |
|
|
|
|
Macintosh Adapter (not included) |
|
|
Use the standard Macintosh adapter since an incompatible |
|
|
adapter is available in the market. (Different signaling system) |
|
HDMI/DVI IN |
|
|
B |
|
|
Rear side of the product. |
(not included) |
|
|
PC |
|
|
|
Connect the Audio cable.
AUDIO (RGB/DVI)
Rear side of the product. |
PC |
Connect the power cord.
Rear side of the product.
REMOTE |
RS-232C |
HDMI/DVI IN |
RGB IN |
AUDIO |
|
COMPONENT IN |
|
|
AV IN |
CONTROL IN |
(CONTROL& |
|
|
(RGB/DVI) |
VIDEO |
L-AUDIO-R |
VIDEO |
L-AUDIO-R |
|
|
SERVICE) |
|
|
Y |
P |
P |
|||
|
OUT |
|
RGB OUT |
|
|
1 |
|
|
|
|
IN |
|
|
|
|
2 |
|
|
AV |
|
|
|
|
|
|
|
OUT |
7
Connecting to External Devices
1 Turn on power by pressing the power button on the product.
SOURCE |
AUTO/SELECT ON/OFF |
Power button
2 Turn on the PC.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT |
SET |
|
|
Or, press the SOURCE button on the back of the product.
SOURCE AUTO/SELECT
AWhen connecting with a D-Sub signal input cable.
•Select RGB : 15-pin D-Sub analog signal.
BWhen connecting with a HDMI to DVI signal input cable.
•Select HDMI/DVI : HDMI to DVI Digital signal.
Input |
|
Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• How to connect to two computers.
Note Connect the signal cables (HDMI to DVI and D-Sub) to each computer. Press the INPUT button on the remote control to select the computer to use.
•Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
8
Connecting to External Devices
Watching RGB Outputs
Use this function when displaying ANALOG RGB inputs of a PC to the other product.
•To use different products connected to each other
Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products.
15-pin D-Sub Signal Cable
RGB IN |
RGB IN |
RGB IN |
RGB IN |
RGB OUT |
RGB OUT |
RGB OUT |
RGB OUT |
PC
PC
Product 1 |
Product 2 |
Product 3 |
Product 4 |
Note
• When multi-connecting in/out cascade format, cables to be less damaged are recommended. We recommend that you should use cable distributor.
9
Connecting to External Devices
When watching VCR / DVD
Connect the video cable as shown in the below figure and then connect the power cord (See page 8).
AWhen connecting with a BNC cable.
•Connect the input terminal with a proper color match.
Product
AV IN
VIDEO L-AUDIO-R
S-VIDEO
AV
OUT
Audio Cable BNC Cable (not included)
(not included)
BWhen connecting with a S-Video cable.
• Connect to the S-Video input terminal to watch high image quality movies.
Product
AV IN
VIDEO L-AUDIO-R
S-VIDEO
AV
OUT
Audio Cable (not included)
S-Video Cable
(not included)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR/DVD Receiver |
|
|
VCR/DVD Receiver |
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT SET
Input
Or, press the SOURCE button on the back of the product.
SOURCE |
AUTO/SELECT |
|
|
|
|
||
|
|||
|
|
|
|
A When connecting with an BNC cable.
• Select AV.
BWhen connecting with an S-Video cable.
•Select AV.
Note
• When the BNC cable is connected simultaneously with S-Video cable, S-Video cable is first.
10
Connecting to External Devices
When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i)
Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page 8).
• Connect the input terminal with a proper color match.
A |
|
Product |
B |
|
Product |
|
|
|
|
|
|
||
|
|
COMPONENT IN |
|
|
|
|
Y |
VIDEO |
L-AUDIO-R |
|
COMPONENT IN |
|
|
PB |
PR |
VIDEO |
|
|||
|
|
|
|
L-AUDIO-R |
||
|
|
1 |
Y |
PB |
PR |
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
2 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BNC Cable |
|
|
|
Audio Cable |
|
|
BNC Cable |
|
|
|
|
Audio Cable |
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
(not included) |
|
|
|
(not included) |
|
|
|
|
|
|
(not included) |
|
||||||||||||||||||||
|
|
|
|
(not included) |
|
|
|
|
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDTV Receiver |
HDTV Receiver |
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT SET
Or, press the SOURCE button on the back of the product.
SOURCE AUTO/SELECT
A • Select Component 1
B • Select Component 2
Input |
|
Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11
Connecting to External Devices
When watching HDMI/DVI/RGB from the VCR/DVD/Set-top Box (480p/576p/720p/1080i)
Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 8).
A |
|
Product |
|
Product |
|
|
|
Product |
|
|
HDMI/DVI IN |
RGB IN |
AUDIO |
HDMI/DVI IN |
RGB IN |
AUDIO |
B |
HDMI/DVI IN |
RGB IN |
AUDIO |
|
|
|
(RGB/DVI) |
||||||||
|
|
|
|
|
(RGB/DVI) |
|
|
|
(RGB/DVI) |
|
|
|
RGB OUT |
|
|
RGB OUT |
|
|
|
|
|
HDMI to DVI |
RCA-PC |
|
D-Sub Signal |
RCA-PC |
|
Signal Cable |
HDMI Signal Cable |
||||
Audio Cable |
Cable |
Audio Cable |
|||
(not included) |
(not included) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR/DVD/Set-top Box |
VCR/DVD/Set-top Box |
|
VCR/DVD/Set-top Box |
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT |
SET |
|
|
Or, press the SOURCE button on the back of the product.
SOURCE AUTO/SELECT
AWhen connecting with a HDMI to DVI signal input cable. When connecting with a HDMI signal input cable.
•Select HDMI/DVI
BWhen connecting with a D-Sub signal input cable.
•Select RGB
Input |
|
|
Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
Connecting to External Devices
Watching AV Outputs
•When you set the input signal of the main screen as 'AV (CVBS)', you can transmit the signal that you're watching to the AV output terminal.
Video/TV
BNC Cable |
|
Audio Cable |
|
||
(not included) |
|
|
|
(not included) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO
AV |
OUT |
Product
S-VIDEO
Audio Cable BNC Cable (not included)
(not included)
Video/TV
Note
• When multi-connecting in/out cascade format, cables to be less damaged are recommended.
We recommend that you should use cable distributor.
13