LG M4210LG Users manual
Order Number : GETEC-C1-10-109 FCC Part 15 subpart B
Test Report Number : GETEC-E3-10-051 Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: LCD Monitor
FCC ID.: BEJM4210LG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
M4210L
www.lg.com
Table of Contents
Connecting the stand .................................................................4
Connecting the Speakers ..........................................................5
To install Portrait ........................................................................6
Using the Remote Control .........................................................7
Name of the Remote Control Buttons ..............................................................................7
Inserting batteries into remote control. ...........................................................................8
Name and Function of the Parts ...............................................9
Rear View ..............................................................................................................................9
Connecting to External Devices................................................10
When Connecting to your PC ............................................................................................10
VESA FDMI wall Mounting .................................................................................................12
Video Input ...........................................................................................................................13
HDMI Input (480p/576p/720p/1080i/1080p) ......................................................................14
Watching AV Outputs..........................................................................................................15
User Menus .................................................................................16
Screen Adjustment options ...............................................................................................16
OSD Menu ............................................................................................................................18
How to adjust the OSD (On Screen Display) screen .....................................................19
How to adjust the screen automatically ..........................................................................19
Adjusting Screen Color ......................................................................................................20
Adjusting the audio function .............................................................................................25
Adjusting the timer function ..............................................................................................26
Selecting the options .........................................................................................................28
Adjust Set ID and check Serial No. and SW version. ....................................................32
Troubleshooting .........................................................................33
Specifications ...........................................................................36
Connecting the stand
- Only on some models.
1. Take the parts for the stand out of the box and assemble them as shown in the
picture.
Parts
First, check if the following parts are all present.
Screws (6)
Stand (1)
Cable management (1)
2. Place a soft cloth on the table and put the product with the screen facing
downward. Connect the stand as shown in the following picture.
3. Use the screws to secure the stand on the rear side of the product as shown
in the diagram.
4
Connecting the Speakers
- Only on some models.
Mount the product onto the speaker by using a screw as shown in the following
connect the speaker cable.
After installing your speakers, use holders and cable ties to organize the speaker cables.
Cable holder
Remove the paper.
* This feature is not available in all model.
Cable tie
* This feature is not available in all model.
When the speaker is installed.
*Connect the input terminal with a proper color match.
5
To install Portrait
- Only on some models.
"When installing Portrait, rotate it clockwise based on its front."
6
6
Using the Remote Control
Name of the Remote Control Buttons
• AV Button
• Power On/Off Button
• Input Select Button
(See next page)
When watching AV, RGB PC,HDMI/DVI.
The product will be automatically turned
off after a certain period of time.
Press this button repetitively to
select an appropriate time duration
- Toggles through preset video
• UP and Down buttons
Bring up and down direction
• Sleep Button
• PSM Button
settings.
There is not a function
which is supported
•
Menu Button
adjustment.
• Mute button
• ARC button
Aspect Ratio Correction. Toggles
through aspect ratio options.
• Auto Button
Automatic adjustment function
(Operational for the analog signal only)
There is not a function
which is supported
There is not a function
which is supported
•
Exit Button
• Volume Button
Volume up and down
• Check Button
There is not a function
which is supported
7
7
Using the Remote Control
• AV Button
Toggles through video
AV RGB PC
HDMI/DVI
• Input Select Button
If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
using the button.
Input
AV
RGB PC
HDMI/DVI
▲▼
Inserting batteries into remote control.
1. Open the battery compartment cover on the back side and
install the batteries matching correct polarity (+ with +,- with -)
2. Install two 1.5 V AAA batteries. Don’t mix old or used batteries
with new ones.
AAA Type
3. Close cover.
4. To remove the batteries, perform the installation actions in
reverse.
8
8
Name and Function of the Parts
* The product image in the user's guide could be different from the actual image.
Rear View
Power Connector : Connect the power cord
RGB PC, HDMI/DVI Ports
- HDMI Supports High Denition input and HDCP (High-bandwidth Digital Content Protection).
Some devices require HDCP in order to display HD signals.
RS-232C Serial Ports
PC Sound Jack
: Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports
Speaker Ports
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the
connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out
using the card jumper of the program (Refer to the Sound Card Manual).
9
9
Connecting to External Devices
When Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
A
When connecting with the D-Sub signal input cable.
When connecting with the HDMI to DVI signal input cable (not included).
B
A
PC
Rear side of the product.
MAC
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
B
(not included)
Rear side of the product.
PC/
PC
* User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain
standard compliance for the product.
Connect the Audio cable.
Rear side of the product.
Connect the power cord.
Rear side of the product.
10
10
PC
Connecting to External Devices
Turn on power by pressing the power button on the product.
1
Power button
Turn on the PC.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT SET
▼▲
Or, press the SOURCE button on the back of the product.
SOURCE
When connecting with a D-Sub signal input cable.
A
• Select RGB PC : 15-pin D-Sub analog signal.
When connecting with a HDMI to DVI signal input cable.
B
• Select HDMI/DVI : HDMI to DVI Digital signal.
Note
▼▲
•
How to connect to two computers.
Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
AUTO/SET
Input
AV
RGB PC
HDMI/DVI
▲▼
Input
AV
RGB PC
HDMI/DVI
▲▼
11
11
Connecting to External Devices
VESA FDMI wall Mounting
This product supports a VESA FDMI compliant mounting interface. These mounts are purchased
separately and not available from LG. Refer to the instructions included with wall mount for more
info.
Kensington Security Slot
The Set is equipped with a kensington Security System
connector on the back panel. The cable and lock are
available separate and are not sold by LG. For more info,
visit http://www.kensington.com, the internet home page
of the Kensington company.
12
12
Connecting to External Devices
Video Input
Connect the video cable as shown in the below gure and then connect the power cord
(See page 10).
When connecting with a BNC cable.
A
•
Connect the input terminal with a proper color match.
Product
BNC Cable
(not included)
Audio Cable
(not included)
VCR/DVD Receiver
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT SET
Or, press the SOURCE button on the back of the product.
SOURCE
When connecting with an BNC cable.
A
•
Select AV.
Note
▼▲
Input
AV
▼▲
• When the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.
AUTO/SET
RGB PC
HDMI/DVI
▲▼
13
13
Connecting to External Devices
HDMI Input (480p/576p/720p/1080i/1080p)
- HDMI Supports High Denition input and HDCP (High-bandwidth Digital Content Protection).
Some devices require HDCP in order to display HD signals.
Connect the video/audio cable as shown in the below gure and then connect the power
cord (See page 10).
Product
Product
HDMI to DVI
Signal Cable
(not included)
VCR/DVD/Set-top Box
RCA-PC
Audio Cable
(not included)
HDMI Signal Cable
(not included)
VCR/DVD/Set-top Box
Note : Dolby Digital is not supported.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT SET
▼▲
Or, press the SOURCE button on the back of the product.
SOURCE
When connecting with a HDMI to DVI signal input cable.
When connecting with a HDMI signal input cable.
• Select HDMI/DVI
▼▲
AUTO/SET
Input
AV
RGB PC
HDMI/DVI
1414
▲▼
Connecting to External Devices
Watching AV Outputs
- When using AV input, you can connect the AV Out to other monitors.
Product
Note
BNC Cable
(not included)
Video/TV
• When multi-connecting in/out cascade format, no loss cables are recommended.
We recommend that you should use cable distributor.
Audio Cable
(not included)
1515
User Menus
Screen Adjustment options
Power Button
Power Indicator
MENU Button
OSD Select /
Adjust Button
• Press this button to turn on the power. Press this button again to
turn it off.
• This Indicator lights up blue when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
• Use
this
button to select an icon or adjust the setting in the OSD screen.
• Adjust the up and down.
• Adjust the volume.
16
Volume
35
User Menus
Screen Adjustment options
AUTO/SET Button
SOURCE Button
IR Receiver
[For PC Analog signal]
Auto in progress
For optimal display change
resolution to 1920 x 1080
[When 1920 x 1080 is selected]
Auto in progress
SOURCE
- Toggles between inputs
AV Composite Video, Separate Video
RGB PC 15-pin D-Sub analog signal
HDMI/DVI Digital signal
• This is where the unit receives signals from the remote control.
▼▲
AUTO/SET
Input
AV
RGB PC
HDMI/DVI
▲▼
17
User Menus
OSD Menu
Icon Function Description
Picture
Audio
Time
Option
Information
Adjusts screen brightness, contrast and color that you prefer.
Adjusts the audio options.
Adjusts the timer options.
Adjusts the screen status according to the circumstances.
Adjust Set ID and check Serial No. and SW version.
Note
OSD(On Screen Disp lay)
The OSD function enables you to adjust the screen status conveniently since it provides
graphical presentation.
18
User Menus
How to adjust the OSD (On Screen Display) screen
Pops up
the menu
screen
1
2
3
4
5
6
Move where
you want to
adjust
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the Buttons.
When the icon you want becomes highlighted, press the SET Button.
Use the Buttons to adjust the item to the desired level.
Accept the changes by pressing the SET Button.
Exit the OSD by pressing the EXIT Button.
Select a
menu icon
Move where
you want to
adjust
Select a
menu icon
•
Use the remote control to adjust the OSD screen.
Adjust the status
How to adjust the screen automatically
Press the AUTO/SET button (AUTO button on a remote Control) in
the PC analog signal. Then optimal screen settings will be selected
that fit into the current mode. If adjustment is not satisfactory, you can
adjust the screen manually.
Save
adjustment
[When 1920 x 1080 is selected]
Auto in progress
Exit from the
menu screen.
19
User Menus
Adjusting Screen Color
Picture
Mode
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
Vivid
Standard
Cinema
Sport
Game
User1
User2
Toggles between screen presets.
• Vivid : Select this option to display with a sharp image.
• Standard : The most general and natural screen display status.
• Cinema : Select this option to lower brightness by one level.
• Sport : Select this option to display with a soft image.
• Game : To enjoy dynamic image when playing a game.
• User1,2 : Select this option to use the user-defined settings.
User2
Backlight 20
Contrast 90
Brightness 50
Color 50
Sharpness 50
Tint 50
Expert
MENU
Note
Backlight : To control the brightness of the screen,adjust the brightness of LCD panel.
Contrast : Adjust the difference between the light and dark levels in the picture.
Brightness : To adjust the brightness of the screen.
Color : To adjust the color to desired level. (Function works in the following mode - DTV)
Sharpness : To adjust the clearness of the screen. (Function works in the following mode -
DTV)
Tint :To adjust the tint to desired level. (Function works in the following mode - DTV)
Expert : To compensate for each image mode, or adjust image values according to a
particular image. (Applied only to User2 menu.) (Function works in the following
mode - AV, HDMI-DTV)
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or
Game the subsequent menus will be automatically set.
20
User Menus
Adjusting Screen Color
Color
Temperature
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
Color Settings
• Cool : Slightly purplish white.
• Medium : Slightly bluish white.
• Warm : Slightly reddish white.
• User : Select this option to use the user-defined settings.
User
Red 0
Green 0
Blue 0
MENU
Red / Green / Blue
Set your own color levels.
Cool
Medium
Warm
User
21
User Menus
Adjusting Screen Color
Advanced
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
• Gamma : Set your own gamma value. : -50/0/50
On the monitor, high gamma values display whitish images and low gamma
values display high contrast images.
• Film Mode : (Function works in the following mode - AV)
When you watch a movie, this function adjusts the set to the best picture
appearance.
• Black Level : (Function works in the following mode - AV(NTSC), HDMI/DVI) adjusts the
contrast and the brightness of the screen using the black level of the screen.
• High : The reflection of the screen gets brighter.
• Low : The reflection of the screen gets darker.
• NR : Removing the noise up to the point where it does not damage the original picture.
To set
22
User Menus
Adjusting Screen Color
Aspect Ratio
To select the image size of the screen.
Picture
16:9
Just Scan
Original
4:3
1:1
14:9
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
Widescreen mode.
Allows you to enjoy the transmitted data fully without any images cut off.
The aspect ratio is not adjusted from the original. It is set by the program being
watched.
This picture format is 4:3 aspect ratio.
The aspect ratio is not adjusted from the original. Used in PC mode.
(Only HDMI/ DVI PC, RGB PC)
14:9 programs are viewed normally in 14:9 with black bars added to the top and
bottom. 4:3 programs are magnified on the top/bottom and left/right sides.
16:9
Original
4:3
14:9
Zoom1
Zoom2
<AV>
Zoom1, 2
4:3 programs are magnified until they fill the 16:9 screen. The top and bottom
will be cut off.
23
User Menus
Adjusting Screen Color
Picture Reset
Screen
• Auto Config. (RGB PC input only) : This button is for the automatic adjustment of the screen
• Manual Config. : If the picture isn't clear after auto adjustment and characters are still trembling,
* Phase, Clock function are not available in HDMI/DVI DTV.
Phase : To adjust the focus of the display. This item allows you to remove any horizontal noise
Clock : To minimize any vertical bars or stripes visible on the screen background. The horizontal
H-Position : Moving the screen position horizontally.
V-Position : Moving the screen position vertically.
H-Size : Adjust the horizontal size of the screen.
V-Size : Adjust the vertical size of the screen.
• XGA Mode (RGB-PC only). : For more improved or better picture quality, select the same mode
• Reset: Return Manual config. and XGA Mode to the default factory settings.
Return Picture Mode,
Color Temperature
, Advanced, Aspect Ratio to the default
factory settings.
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
To set
Adjust the screen video.
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
To set
Screen
Auto Config.
Manual Config.
XGA Mode
Reset
MENU
position, clock and phase. This function is available for
analog signals only.
adjust the picture phase manually.
and clear or sharpen the image of characters. This function is available for analog
signals only.
screen size will also change. This function is available for analog signals only.
corresponding to computer resolution.
To set
24
Loading...