LG M4210LCBN User manual [pt]

<![if ! IE]>

<![endif]>ENGLISH

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating your set and retain it for future reference.

MONITOR SIGNAGE MODELS

M4210L

www.lg.com

Table of Contents
Connecting the stand.................................................................	4
Connecting the Speakers...........................................................	5
To install Portrait.........................................................................	6
Using the Remote Control..........................................................	7
Name of the Remote Control Buttons..............................................................................	7
Inserting batteries into remote control.............................................................................	8
Name and Function of the Parts................................................	9
Rear View..............................................................................................................................	9
Connecting to External Devices................................................	10
When Connecting to your PC............................................................................................	10
VESA FDMI wall Mounting..................................................................................................	12
Video Input............................................................................................................................	13
HDMI Input (480p/576p/720p/1080i/1080p).......................................................................	14
Watching AV Outputs..........................................................................................................	15
User Menus..................................................................................	16
Screen Adjustment options...............................................................................................	16
OSD Menu ............................................................................................................................	18
How to adjust the OSD (On Screen Display) screen......................................................	19
How to adjust the screen automatically...........................................................................	19
Adjusting Screen Color.......................................................................................................	20
Adjusting the audio function.............................................................................................	25
Adjusting the timer function..............................................................................................	26
Selecting the options .........................................................................................................	28
Adjust Set ID and check Serial No. and SW version......................................................	32

Troubleshooting..........................................................................	33
Specifications ............................................................................	36

Connecting the stand

-Only on some models.

1.Take the parts for the stand out of the box and assemble them as shown in the picture.

Parts

First, check if the following parts are all present.

Screws (6)

Stand (1)

Cable management (1)

2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture.

3. Use the screws to secure the stand on the rear side of the product as shown in the diagram.

Connecting the Speakers

- Only on some models.

Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable.

After installing your speakers, use holders and cable ties to organize the speaker cables.

Cable holder

Remove the paper.

* This feature is not available in all model.

When the speaker is installed.

Cable tie

*Connect the input terminal with a proper color match.

* This feature is not available in all model.

To install Portrait

- Only on some models.

"When installing Portrait, rotate it clockwise based on its front."

Using the Remote Control

Name of the Remote Control Buttons

• Power On/Off Button

• AV Button

• Input Select Button

(See next page)

• Sleep Button

• ARC button

When watching AV, RGB PC,HDMI/DVI.

Aspect Ratio Correction. Toggles

The product will be automatically turned

through aspect ratio options.

off after a certain period of time.

• Auto Button

Press this button repetitively to

Automatic adjustment function

select an appropriate time duration

(Operational for the analog signal only)

• PSM Button

- Toggles through preset video

There is not a function

settings.

which is supported

There is not a function

which is supported

• Menu Button

• Exit Button

• Volume

Button

• UP and Down buttons

Bring up and down direction

Volume up and down

adjustment.

• Check Button

• Mute button

There is not a function

which is supported

Using the Remote Control

• AV Button

Toggles through video

AV RGB PC

HDMI/DVI

• Input Select Button

If you press the button once, the following Input Signal

Window will appear. Select the signal type you want using the button.

Input

RGB PC

HDMI/DVI

▲▼

Inserting batteries into remote control.

	1.	Open the battery compartment cover on the back side and
		install the batteries matching correct polarity (+ with +,- with -)
	2.	Install two 1.5 V AAA batteries. Don’t mix old or used batteries
		with new ones.
	3.	Close cover.
AAA Type	4.	To remove the batteries, perform the installation actions in
		reverse.

Name and Function of the Parts

* The product image in the user's guide could be different from the actual image.

Rear View

Power Connector : Connect the power cord

RGB PC, HDMI/DVI Ports

-HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection).

Some devices require HDCP in order to display HD signals.

RS-232C Serial Ports

PC Sound Jack

: Connect the audio cable to the *LINE OUT jack of the PC sound card.

AV Ports

Speaker Ports

*LINE OUT

A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume.

If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual).

Connecting to External Devices

When Connecting to your PC

First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable.

A	When connecting with the D-Sub signal input cable.
B	When connecting with the HDMI to DVI signal input cable (not included).
	A
	PC
	Rear side of the product.
	MAC	PC/MAC
	MAC

Macintosh Adapter (not included)

Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)

	(not included)
Rear side of the product.	PC

*User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product.

Connect the Audio cable.

	(not included)
Rear side of the product.	PC
	PC
Connect the power cord.	Rear side of the product.
	Rear side of the product.

Connecting to External Devices

1 Turn on power by pressing the power button on the product.

Power button

2 Turn on the PC.

Select an input signal.

Press the INPUT button on the remote control to select the input signal.

INPUT ▼▲ SET

Or, press the INPUT button on the back of the product.

INPUT	▼▲	AUTO/SET
INPUT	▼▲	AUTO/SET
A When connecting with a D-Sub signal input cable.
			Input	Input

• Select RGB PC : 15-pin D-Sub analog signal.			AV	AV
B When connecting with a HDMI to DVI signal input cable.			RGB PC	RGB PC
B When connecting with a HDMI to DVI signal input cable.			HDMI/DVI	HDMI/DVI
• Select HDMI/DVI : HDMI to DVI Digital signal.

			▲▼	▲▼

• How to connect to two computers.

Note Connect the signal cables (HDMI to DVI and D-Sub) to each computer.

Press the INPUT button on the remote control to select the computer to use.

• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.

Connecting to External Devices

VESA FDMI wall Mounting

This product supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and not available from LG. Refer to the instructions included with wall mount for more info.

Kensington Security Slot

The Set is equipped with a kensington Security System connector on the back panel. The cable and lock are available separate and are not sold by LG. For more info, visit http://www.kensington.com, the internet home page of the Kensington company.

Connecting to External Devices

Video Input

Connect the video cable as shown in the below figure and then connect the power cord

(See page 10).

AWhen connecting with a BNC cable.

• Connect the input terminal with a proper color match.

Product

Audio Cable BNC Cable (not included) (not included)

VCR/DVD Receiver

Select an input signal.

Press the INPUT button on the remote control to select the input signal.

INPUT ▼▲ SET

Or, press the INPUT button on the back of the product.

INPUT ▼▲ AUTO/SET

AWhen connecting with an BNC cable.

•Select AV.

Input

AV RGB PC

HDMI/DVI

▲▼

Note • When the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.

Connecting to External Devices

HDMI Input (480p/576p/720p/1080i/1080p)

-HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection).

Some devices require HDCP in order to display HD signals.

Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 10).

Product

HDMI to DVI	RCA-PC
HDMI to DVI	Audio Cable
Signal Cable	Audio Cable	HDMI Signal Cable
Signal Cable	(not included)	HDMI Signal Cable
(not included)	(not included)	(not included)

VCR/DVD/Set-top Box

Note : Dolby Digital is not supported.

Select an input signal.

Press the INPUT button on the remote control to select the input signal.

INPUT ▼▲ SET

Or, press the INPUT button on the back of the product.

INPUT ▼▲ AUTO/SET

When connecting with a HDMI to DVI signal input cable. When connecting with a HDMI signal input cable.

• Select HDMI/DVI

Input

RGB PC

HDMI/DVI

▲▼

Connecting to External Devices

Watching AV Outputs

- When using AV input, you can connect the AV Out to other monitors.

Product

BNC Cable									Audio Cable








(not included)									(not included)

Video/TV

Note	• When multi-connecting in/out cascade format, no loss cables are recommended.
	We recommend that you should use cable distributor.

User Menus

Screen Adjustment options

Power Button

•Press this button to turn on the power. Press this button again to turn it off.

•This Indicator lights up blue when the display operates normally(on

Power Indicator mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber.

MENU Button

•Use this button to show/hide the OSD (On Screen Display) menu screen.

OSD Select /

Adjust Button

• Use this button to select an icon or adjust the setting in the OSD screen.

• Adjust the up and down.

•Adjust the volume.	Volume	35

User Menus

Screen Adjustment options

AUTO/SET Button	[For PC Analog signal]

Auto in progress

For optimal display change resolution to 1920 x 1080

[When 1920 x 1080 is selected]

Auto in progress

INPUT Button

INPUT ▼▲ AUTO/SET

- Toggles between inputs

AV	Composite Video, Separate Video
RGB PC	15-pin D-Sub analog signal
HDMI/DVI	Digital signal

Input

AV RGB PC

HDMI/DVI

▲▼

IR Receiver	• This is where the unit receives signals from the remote control.

User Menus

OSD Menu

Icon		Function Description

		Adjusts screen brightness, contrast and color that you prefer.

	Picture

Adjusts the audio options.

Audio

Adjusts the timer options.

Time

Adjusts the screen status according to the circumstances.

Option

Adjust Set ID and check Serial No. and SW version.

Information

Note OSD(On Screen Display)

The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.

User Menus

How to adjust the OSD (On Screen Display) screen

Pops up	Move where	Select a	Move where	Select a	Adjust the status	Save	Exit from the
the menu	you want to	menu icon	you want to	menu icon	Adjust the status	adjustment	menu screen.
the menu	you want to	menu icon	you want to	menu icon		adjustment	menu screen.
screen	adjust		adjust

• Use the remote control to adjust the OSD screen.

1	Press the MENU Button, then the main menu of the OSD appears.


2	To access a control, use the		Buttons.


3	When the icon you want becomes highlighted, press the SET Button.


4	Use the	Buttons to adjust the item to the desired level.


5	Accept the changes by pressing the SET Button.


6	Exit the OSD by pressing the EXIT Button.

How to adjust the screen automatically

Press the AUTO/SET button (AUTO button on a remote Control) in the PC analog signal. Then optimal screen settings will be selected that fit into the current mode. If adjustment is not satisfactory, you can adjust the screen manually.

[When 1920 x 1080 is selected]

Auto in progress

User Menus

Adjusting Screen Color

Picture

Mode

		Picture

		Picture Mode	Vivid
		Color Temperature	Standard
		Color Temperature	Standard
		Advanced	Cinema
		Aspect Ratio	Sport
		Aspect Ratio	Sport
		Picture Reset	Game
			Game
			User1
		Screen	User1
			User2

Toggles between screen presets.

•Vivid : Select this option to display with a sharp image.

•Standard : The most general and natural screen display status.

•Cinema : Select this option to lower brightness by one level.

•Sport : Select this option to display with a soft image.

•Game : To enjoy dynamic image when playing a game.

•User1,2 : Select this option to use the user-defined settings.

User2

Backlight	20
Backlight	20
Contrast	90
Brightness	50
Color	50
Sharpness	50
Tint	50
Expert

Backlight : To control the brightness of the screen,adjust the brightness of LCD panel.

Contrast : Adjust the difference between the light and dark levels in the picture. Brightness : To adjust the brightness of the screen.

Color : To adjust the color to desired level. (Function works in the following mode - DTV) Sharpness : To adjust the clearness of the screen. (Function works in the following mode -

DTV)

Tint :To adjust the tint to desired level. (Function works in the following mode - DTV) Expert : To compensate for each image mode, or adjust image values according to a

particular image. (Applied only to User2 menu.) (Function works in the following mode - AV, HDMI-DTV)

Note If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or

Game the subsequent menus will be automatically set.

User Menus

Adjusting Screen Color

Color

Temperature

		Picture
		Picture Mode
		Color Temperature	Cool
		Color Temperature	Cool
		Advanced	Medium
		Aspect Ratio	Warm
		Aspect Ratio	Warm
		Picture Reset	User
		Picture Reset	User
		Screen

Color Settings

•Cool : Slightly purplish white.

•Medium : Slightly bluish white.

•Warm : Slightly reddish white.

•User : Select this option to use the user-defined settings.

User

Red	0
Red	0
Green	0
Blue	0

Red / Green / Blue

Set your own color levels.

+ 48 hidden pages