LG LW1214ER User Manual [en, es]
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your air conditioner and retain it for future reference.
TYPE WINDOW
MODEL LW1214ER
P/NO MFL68007101
www.lgappliances.com
Safety Precautions
Before Operation
Introduction
Electrical Safety
Installation
Operating Instructions
Maintenance and Service
7
16
20
Do not store flammables like
gasoline benzene thinner
etc. near the air conditioner.
No correlation between fan
usage and oxygen depletion.
Unplug the unit when not
using it for a long time.
Hold the plug by the head
（not the cable）when taking
it out.
For inner cleaning, contact an Authorized Service Center or a dealer.
Do not use harsh detergent that causes corrosion or damage on the unit.
Harsh detergent may also cause failure of prod
When gas leaks, open the
window for ventilation before
operating the unit.
uct, fire, or electric shock.
Never touch the metal parts
of the unit when removing
the filter.
Install the product so the exhaust and noise
are not aimed directly at the neighbors.
Be considerate.
Follow installation instructions exactly.
Do not use this appliance for
special purposes such as
，
cooling pets
foods，
precision
machinery，or objects of art
Instead of running air conditioning
constantly
for fresh air occasionally.
You will feel better.
If the liquid from the battery gets onto your skin
or clothers，
wash it well with clean water. Do
not use the remote if the battery has leaked.
y
，open a window
If you eat the liquid from the battery,brush
your teeth and see doctor.Do not use the
remote if the battery has leaked.
y
2. No correlation between fan usage and oxygen depletion.
3.
RESET
TEST
should be
Avoid shock hazard. This unit cannot
be user-serviced. Do NOT open the
tamper-resistant sealed portion.
All warranties and performance will
be voided. This unit is not intended
to be used as an ON/OFF switch.
9
14 EA
3 EA 5 EA
2 EA
2 EA
(Not adhesive backed)
1 EA
2 EA
Phillips head
screwdriver
2 EA
1 EA
1 EA
Left Guide Panel
( Adhesive backed)
1EA
2 EA
Right Guide Panel
Curtain
Scissors or
knife
Adjustable
Wrench
11
slightly tilted
between
Preparation Of Chassis
Remove 4 screws which fasten the cabinet at both
sides and at the back.
(Keep the screws for later use.)
27 39
16
12
(Adhesive backed)
the base pan
（Adhesive backed）
guide
hole
frame curtain
sill support.
Upper guide
Left Guide panel
Right Guide Panel
8
Screws
(Type A)
Frame guide
upper
Center hole
13
frame guides
sill support
frame curtain
frame curtain
sill support
14
(removed from the cabinet) at
See page 12.
（Not adhesive backed）
Before installing the front grille, pull out
the vent control lever located above the
unit control knobs, as shown.
Attach the front grille to the cabinet by inserting
14
the tabs the grille into the slots on the front the
cabinet.Push the grille in until it snaps into place.
Guide the lever carefully through the
grille as you push it in.
（Not adhesive backed）
Type C
Take out the air filter and secure it with 2 Type
15
A screws through the front grille.
Window installation of room air conditioner is
now completed. See ELECTRICAL DATA for
attaching power cord to electrical outlet.
15
Loading...