LG LuV200 Owner's Manual
Model
Language
Page
Material Size(W*H)
Designer
Designer
Confirm
Color(cover/body)
Part No. Description
Date
No. Date
Chage Record
Change content
ECO No.
1
2
3
4
5
6
7
8
9
ＬｕＶ２００Ｒ
Ｅｎｇｌｉｓｈ／Ｓｐａｎｉｓｈ／Ｆｒｅｎｃｈ
７４
１／１
１９０＊２６０
２０１０／０２／０８
ＭＦＬ６２８００２０１
Ｚｈｉｈｕａ
ＭＡＮＵＡＬ，ＯＷＮＥＲＳ
１１０ｇ
ＡＣＴＵ００１７５４１０．０３．０５
ｌｉｘｉｑｉｎｇ
ｃｕｉｙｏｎｇｔａｏ
ｃｈａｎｇｅ ｃｏｎｔｅｎｔｓ
OWNER’S MANUAL
VACUUM CLEANER
LuV200R
Please read this manual carefully before operating your
set and retain it for future reference.
P/NO : MFL62800201
www.lge.com
ENGLISH
ESPAÑOL FRANÇAIS
CONTENTS
Unpacking the Vacuum Cleaner
Assembly Parts
Attaching handle
Attaching the Hose
Accessory Storage
Cord storage
4
ASSEMBLY
5
OPERATION
Storing the Vacuum Cleaner
Dust Tank Components
Emptying the Dust Tank
Cleaning the Dust Tank
Cleaning the Foam Pre Filter
Cleaning the HEPA Filter
Pet Hair Turbine tool
Agitator Maintenance
Replacing the Agitator Belt
Removing Clogs
Cleaning the Exterior of the Vacuum Cleaner
15
15
16
16
17
17
18
18
19
20
21
Control Operation
Body Release Operation
Adjusting the Pile Height
Accessory
Accessory Use Chart
Installing Attachments
Tips and Tricks
Using the Pet hair turbine tool
Stairways and Landings
Agitator Motor Overload Protection
Thermal Overload Protection
1
LG VACUUM CLEANER WARRANTY
2
IMPORTANT SAFETY INFORMATIONS
7
7
8
8
9
9
10
10
1 1
12
12
13
13
13
13
14
14
LG VACUUM CLEANER WARRANTY3
IMPORTANT SAFETY INFORMATIONS4
PARTS AND FEATURES 6
3
PARTS AND FEATURES
6
CARE & CLEANING
TROUBLESHOOTING 22
7
TROUBLESHOOTING
2
ENGLISH
LG VACUUM CLEANER WARRANTY
LG Electronics Inc. will repair or replace your product, at LG’s option, if it proves to be defective in material or workmanship
under Personal household use, during the warranty period set forth below, effective from the date of original consumer
purchase of the product. This limited warranty is good only to the original purchaser of the product and effective only when
used in U.S.A and Canada.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY
CONSEQUENTIAL, INDIRECT, OR INCIDENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES
OR PROFITS, IN CONNECTION WITH THE PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON
HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
This warranty covers only defects in material and workmanship.
LGE will NOT pay for:
1. Expendable items that can wear out, including but not limited to filters, belts.
2. A service technician to instruct the user in correct product assembly, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not assembled, operated or maintained according to all instructions
supplied with this product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended
purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than
those recommended in all instructions supplied with this product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
This warranty is extended to the original purchaser for products purchased for home use within the USA. In Alaska, the
warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from states
to states. To know what your legal rights are, consult your local or state consumer affairs or your state’s Attorney General.
CUSTOMER ASSISTANCE INFORMATION:
WARRANTY PERIOD:
Five Year
From the date of the
original purchase
Any part of the vacuum cleaner which fails due to a defect in materials or workmanship.
During this full five-year warranty, LG will also provide, free of charge, all labor and shop
service to replace the defective part.
(Except-Agitator motor 3 years warranty)
HOW SERVICE IS HANDLED:
To Prove Warranty Coverage
To Obtain Nearest Authorized
Service Center or Sales Dealer,
or to Obtain Product, Customer,
or Service Assistance
Retain your Sales Receipt to prove date of purchase.
A copy of your Sales Receipt must be submitted at the time warranty service is
provided.
Call 1-800-243-0000 (Phone answered 24 hours - 365 days a year) and choose the
appropriate prompt from the menu; or visit our website at: http://us.lgservice.com.
(In Canada- Call 1-888-542-2623, website http://ca.lgservice.com)
3
IMPORTANT SAFETY INFORMATIONS
• Disconnect electrical supply before servicing or
cleaning the unit or when cleaner is not in use.
Failure to do so could result in electrical shock
or personal injury.
• Do not use vacuum cleaner to pick up anything that is
burning or smoking such as cigarettes, or hot ashes.
Doing so could result in death, fire or electrical shock.
• Do not vacuum flammable or explosive substances
such as gasoline, benzene, thinners, propane
(liquids or gases).
The fumes from these substances can create a fire
hazard or explosion. Doing so could result in death
or personal injury.
• Do not handle plug or vacuum cleaner with wet hands.
Doing so could result in death or electrical shock.
• Do not unplug by pulling on cord.
Doing so could result in product damage or electrical
shock. To unplug, grasp the plug, not the cord.
• Keep hair, loose clothing, fingers, and all parts of
the body away from openings and moving parts.
Failure to do so could result in electrical shock or
personal injury.
• Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run vacuum cleaner over
cord. Keep cord away from heated surfaces.
Failure to do so could result in electrical shock or
personal injury or fire or product damage.
Personal injury or product damage could result.
• Do not allow to be used as toy. Close attention is
necessary when used by or near children.
• Do not use the vacuum cleaner if the power cord
or plug is damaged or faulty.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid
hazard.
• Do not use vacuum cleaner if it has been under water.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid
hazard.
• Do not continue to vacuum if any parts appear
missing or damaged.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid
hazard.
• Do not use an extension cord with this vacuum
cleaner.
Fire hazard or product damage could result.
• Using proper voltage.
Using improper voltage may result in damage to the
motor and possible injury to the user. Proper voltage is
listed on the bottom of vacuum cleaner.
• Turn off all controls before unplugging.
Failure to do so could result in electrical shock or
personal injury.
• Do not change the plug in any way.
• Use extra care when cleaning or stairs.
• Do not leave appliance when plugged in. Unplug from
outlet when not in use and before servicing.
• Hold plug when rewinding onto cord reel.
Do not allow plug to whip when rewinding.
Failure to do so could result in electrical shock or
personal injury or product damage. Doing so result in
death. If plug does not fit, contact a qualified electrician
to install the proper outlet.
WARNING
READ ALL INSTRUCTIONS BEFORE USE
- To reduce the risk of fire, electric shock, or injury:
Read and follow all instructions before using your Vacuum cleaner to prevent the risk of fire, electric shock,
personal injury, or damage when using the Vacuum cleaner. This guide do not cover all possible conditions
that may occur. Always contact your service agent or manufacturer about problems that you do not understand.
This is the safety alert symbol. This symbol alerts you to potential hazards that can
kill or hurt you and others. All safety messages will follow the safety alert symbol
and either the word “WARNING” or “CAUTION”.
WARNING
This symbol will alert you to hazards or unsafe practices which
could cause serious bodily harm or death.
CAUTION
This symbol will alert you to hazards or unsafe practices which
could cause bodily injury or property damage.
4
• Repairs to electrical appliances may only be
performed by qualified service engineers.
Improper repairs may lead to serious hazards for
the user.
• Do not put fingers near the gear.
Failure to do so could result in personal injury.
• Do not use out doors or on wet surfaces.
Failure to do so could result in electrical shock or
personal injury.
• Do not put anything, between Vacuum cleaner
body and agitator head space.
Personal injury or product damage or living thing’s
damage could result.
•
The cords, wires and/or cables supplied with this
product contain chemicals, including lead or
lead compounds, known to the state of California
to cause cancer and birth defects or other
reproductive harm. Wash hands after using.
WARNING
• Do not put any objects into openings.
Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free
of dust, lint, hair and anything that may reduce
air flow.
Failure to do so could result in product damage.
• Do not use vacuum cleaner without dust tank
and/or filters in place.
Failure to do so could result in product damage.
• Always clean the dust tank after vacuuming
carpet cleaners or fresheners, powders and fine
dust.
These products clog the filters,reduce airflow and
can cause damage to the cleaner. Failure to clean
the dust tank could cause permanent damage to the
cleaner.
• Do not use vacuum cleaner to pick up sharp
hard objects, small toys, pins, paper clips, etc.
They may damage the cleaner or dust tank.
• Store the vacuum cleaner indoors.
Put the vacuum cleaner away after use to prevent
tripping over it.
• The vacuum cleaner is not intended to use by
young children or infirm people without
supervision.
Failure to do so could result in personal injury or
product damage.
• Only use parts produced or recommended
Electronics Service Agents.
Failure to do so could result in product damage.
• Use only as described in this manual. Use only
with LG recommended or approved attachments
and accessories.
Failure to do so could result in personal injury or
product damage.
• To avoid personal injury and to prevent the
machine from falling when cleaning stairs,
always place it at the bottom of stairs.
Failure to do so could result in personal injury or
product damage.
• Make sure the filters (exhaust filter and motor
safety filter) are completely dry before replacing
in the machine.
Failure to do so could result in product damage.
• Do not dry the filter in an oven or microwave.
Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer.
Failure to do so could result in fire hazard.
• Do not dry near an open flame.
Failure to do so could result in fire hazard.
• Always turn vacuum cleaner off before
connecting or disconnecting the hose.
Personal injury or product damage could result.
• Proper assembly and safe use of your vacuum
cleaner are your responsibilities.
CAUTION
Thermal protector :
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating.
If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.
Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or
clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the
vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.
If the vacuum cleaner still does not run, contact a qualified electrician.
IMPORTANT SAFETY INFORMATIONS
ENGLISH
5
It is important to know your vacuum cleaner’s parts and features to assure its proper and safe use.
Review these before using your vacuum cleaner.
Accessory ToolsCommon Replacement Parts
To order these parts call
1-800-243-0000 (U.S.A)
1-888-542-2623 (Canada)
Pet hair
turbine tool
Dusting brush
& Crevice tool
Handle
Power On/Off button
Pet hair turbine tool
HEPA Filter ADQ72913302
Foam Pre Filter
Filter Frame MDQ62256901
Foam Filter MDJ61980603
(ADV72987202)
MAS61843401Agitator Belt
Accessory Holder
Dust tank
release button
Carry handle
Dust separator
Dust tank
Exhaust filter
Carpet height
indicators
Cord hook
Hose
Wand
Cord rewind
button
Body release
Height
adjustment
Cord
Agitator
Dusting brush
& Crevice tool
Carpet/Floor button
Side door
PARTS AND FEATURES
6
ASSEMBLY
Unpacking the Vacuum Cleaner
Carefully unpack the vacuum cleaner and make
sure that you have all parts before discarding of
any packaging.
Remove any tape, cardboard inserts and
protective film before assembly.
Items that are packed in the box:
Assembly Parts
To reduce the risk of shipping damage, your vacuum cleaner is shipped partially unassembled.
1. Vacuum Cleaner Body
2. Handle with Pet hair turbine tool
3. Dusting Bush & Crevice Tool
4. Adjustable Wand
5. Hose
6. Handle attachment screw
7. Additional Foam Filter
3. Dusting Brush &
Crevice Tool
4. Adjustable wand
1. Vacuum Cleaner Body
5. Hose
7. Additional
Foam Filter
2. Handle with Pet hair turbine tool
6. Handle attachment screw
ENGLISH
7
1. Slide handle onto the main body.
Attaching handle Attaching the Hose
2. Insert screw into the back side of the handle
and tighten using a Phillips head screwdriver.
1. Insert the wand into the handle hose.
2. Attach the opposite side of the hose onto
the main body.
3. Align the hose with the holder on the side
of the vacuum and place the end of the
wand onto the main body.
Button
Hole
Tighten screw as much as you can.
Personal injury or product damage
can occur.
WARNING
ASSEMBLY
8
Personal Injury and Product Damage Hazard!
Hose storage consist of two strong magnetic.
Keep away electronic equipment or dangerous
steel things from hose storage.
DO NOT use outlets above counters.
Damage to items in the surrounding area could occur.
WARNING
Your vacuum cleaner features convenient on-board
storage for the Dusting bush & Crevice tool.
• Insert the Dusting bush & Crevice tool onto the
main body.
Cord Storage
To release the cord:
Grasp the plug and pull cord to desired cord length.
To store the cord:
Hold plug and press on the cord rewind button
on the rear side of handle.
To prevent cord from whipping, hold plug until
cord is rewound.
NOTE: To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other).
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug.
If it still does not fit, contact a qualified
electrician to in stall the proper outlet.
Do not change the plug in any way.
Accessory Storage
ASSEMBLY
9
CAUTION
ENGLISH
Personal Injury Hazard
Do not set the vacuum on the stairs, always keep the unit on the floor.
WARNING
Do not place anything between the main
body and vacuum head.
Personal injury or product damage can occur.
WARNING
1. Power On/Off:
To turn the vacuum on and off.
2. Carpet/Floor:
To toggle between the agitator being on or off.
Note: Carpet = Agitator on, Floor = Agitator off
The agitator will not spin when the
Vacuum is in the upright position.
CARPET
FLOOR
2
POWER
ON/OFF
Body Release Operation
• To begin vacuuming, press the pedal on
the left side of the vacuum release.
NOTE: When the vacuum is in the upright
position the agitator will not run.
Control Operation
1
OPERATION
10
OPERATION
To adjust the pile height:
When it is necessary to raise and lower the front of
the vacuum for various carpet pile heights, press
the right foot pedal to adjust the pile height.
Each press will raise the agitator one notch.
Adjusting the Pile Height
Suggested pile height settings:
You may need to raise the height to make some
jobs easier, such as vacuuming area rugs and
longer pile rugs.
For maximum cleaning performance, the following
carpet height settings are recommended:
• L - for all types of carpet
• Higher settings - for very deep pile carpet where
easier pushing effort is desired, while maintaining
good cleaning performance.
H = High
M = Medium
ML = Medium Low
L = Low
There are 4 settings:
NOTE: If the vacuum is difficult to push, press the
Height adjustment to the next higher setting.
Attention:
Special care is required when vacuuming
certain types of carpet or flooring. Always check the
carpet or floor covering manufacturer’s recommended
cleaning instructions before vacuuming.
11
ENGLISH
Accessory Use Chart
Do NOT use on pets.
Dusting Brush
Use the dusting brush in place for cleaning furniture,
walls,etc.
Crevice Tool
The crevice tool can be used for tight corners,
between cushion and various other hard to reach
places.
CLEANING AREA
* Always make sure attachments are clean before using on fabrics.
ACCESSORY
Between
Cushions
Upholstered
Surfaces*
Furniture
and Hard
Surfaces*
Drapes* Stairs
Cushions
Carpeted
Floors/
Rugs
Walls
Pet hair
turbine
tool
Dusting
Brush
Crevice
Tool
Pet hair turbine tool
This air-turbine powered brush is great for stairs
and interiors, as well as removing pet hair, lint, etc.
from fabrics and carpets.
Accessory
OPERATION
12
Using the Crevice tool
Slide the crevice tool over the end of the wand or
fit it into the handle.
Dusting brush Crevice tool
Using the Wand and Hose
Release the wand and hose
1. Hold the wand on the body and tilt the wand.
2. Lift the wand out and up.
Installing Attachments
Carpet Edges and Corners
For tight corners, carpet edges and along base
boards, use the dusting brush.
Use the crevice tool for especially hard to reach
areas.
Tips and Tricks
Using the Pet hair turbine tool
The Pet hair turbine tool attaches to the wand like the
other attachments. It features air-turbine powered
brush to provide extra cleaning power on carpets and
fabrics. It is great for cleaning stairs, cushions and
vehicle upholstery.
When using the Pet hair turbine tool, check frequently
for the buildup of hair, fibers, lint and other debris in
the brush area.
Excessive buildup can reduce performance and could
damage the Pet hair tool.
See the Care and Cleaning section for cleaning
instructions.
Stairways and Landings
Use the Crevice or Pet hair turbine tool on stairs
and landings. Make sure that the vacuum cleaner is
placed so that it cannot tip or fall.
See page 12 for instructions on selecting and
using attachments.
OPERATION
13
ENGLISH
Thermal Overload Protection
This vacuum cleaner has a thermal overload
protector which automatically activates to protect
the vacuum cleaner from overheating. If a clog
disturbs the normal flow of air to the motor, the
thermal protector turns the motor off automatically
to allow the motor to cool in order to prevent
possible damage to the vacuum cleaner.
To correct the problem: Turn the vacuum cleaner
off and unplug the power cord.
Check for and remove clogs, if necessary.
Also check and clean any dirty filters.
Wait approximately 30 minutes and plug the
vacuum cleaner in and turn back on to see if the
motor protector has reset.
The thermal protector system will not reset until the
vacuum cleaner has completely cooled down.
The agitator has a built-in protection against motor
damage should the agitator jam.
If the agitator slows down or stops, the agitator
overload protector shuts off the agitator motor.
The suction motor will remain on at this time.
To correct problem: Turn off and unplug vacuum
cleaner, remove obstruction and press the reset
button.
Agitator Motor Overload
Protection
OPERATION
14
CARE & CLEANING
Always follow all safety precautions when cleaning and servicing the vacuum cleaner.
When not in use, press on the cord rewind button
to store the cord. Store the dusting brush & crevice
tool in their proper place on the back of the vacuum
cleaner.
Storing the Vacuum Cleaner Dust Tank Components
The dust tank consists of several key components.
Always make sure that all parts are properly
reinstalled after emptying the dust tank.
NEVER operate the vacuum cleaner without all
filters in place!
NEVER operate the vacuum cleaner with wet
filters or components!
Key components
1~2. Foam Pre Filter:
Captures medium to fine particles.
It consists of Filter frame & Foam Filter.
These are washable.
3. Dust tank lid:
Open to access Foam pre filter.
4. Dust separator:
Separate dust from air coming in.
5. Side door:
Open to remove dirt from dust separator.
6. Emptying dirt release:
Press down to open the bottom plate.
7. Dust tank:
Where dirt is collected.
8. Bottom plate:
Open to empty the dust tank.
9. Prevention Lever:
Prevent using without Foam pre filter.
1. Filter frame
3. Dust tank lid
2. Foam filter
4. Dust separator
8.Bottom plate
5. Side door
6. Emptying dirt release
7. Dust tank
15
ENGLISH
9. Prevention Lever
Emptying the Dust Tank
For best performance, always empty the dust
tank when the dirt level reaches the MAX line.
TO REMOVE DUST TANK:
Press the dust tank release button, tilt the dust
tank back, then lift it out of the vacuum cleaner.
TO EMPTY DUST TANK:
Press the emptying dirt release and open the
bottom plate, as shown.
Electrical shock and personal injury hazard.
Always unplug power cord from electrical
outlet before performing any service on
vacuum cleaner. Failure to do so could
result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
WARNING
TO REINSTALL THE DUST TANK:
Place it in the holder, then tilt forward until it clicks
into place. Make sure the dust tank is properly
seated!
Warning: Do not touch the gears or switches
located on the main body below the dust bin.
Cleaning the Dust Tank
For optimal performance, check filters regularly
and clean when necessary.
To Clean the Dust Tank:
1. Remove the dust tank from the vacuum cleaner.
2. Press the dirt release and open the bottom plate.
3. Wipe out the dust tank with a soft cloth or paper
towel.
4. Release the latch on the Side door on both the
right and left sides.
5. Remove any hair, fibers or other debris from the
dust separator.
Do not remove the cones attached to the side
door for cleaning.
NEVER operate the vacuum cleaner with
wet filters or components!
CARE & CLEANING
16
For optimal performance, check the filters every
3 months and clean when necessary.
Don’t close the dust tank lid without the Foam
Filter.
To Clean the Foam pre filter:
1. Remove the dust tank from the vacuum cleaner.
2. Lift up on the dust tank lid release and open the
lid.
3. Lift out the Foam pre filter.
4.
Separate the foam filter from the filter frame.
5.
Shake out any excess dirt or debris and rinse
the foam filter & filter frame with clean water.
A wet filter can cause permanent damage to
the vacuum cleaner.
Be sure filters are completely dry before
reinstalling.
CAUTION
Cleaning the Foam Pre Filter
6. Dry completely away from sunlight.
NEVER operate the vacuum cleaner with wet
filters or components!
If you notice a loss of suction and cleaning the
Foam filter does not help, you need to replace
the Foam filter. You can purchase additional foam
filters from LG by calling 1-800-243-0000(U.S.A),
1-888-542-2623 (Canada) and asking for parts
on page 6.
Cleaning the HEPA Filter
For optimal performance, check the filter
every 6 months and clean when necessary.
To Clean the HEPA Filter:
1. Remove the exhaust filter cover.
2. Lift out the filter by pressing the hook.
Exhaust filter cover
CARE & CLEANING
17
ENGLISH
Pet Hair Turbine tool
To clean the Pet hair turbine tool
1. Remove the four screws on the bottom of the
Pet hair turbine tool.
2. Lift off the cover.
3. Remove any debris.
To reassemble:
4. Carefully press cover onto tabs until they snap
into place.
5. Insert and tighten screws removed in Step 1.
Do NOT overtighten the screws.
Do Not use the pet hair turbine tool on any
animal.
Agitator Maintenance
Frequently check the agitator brush area for hair,
string and lint buildup.
Remove the Agitator Brush Cover:
1. Unplug the vacuum cleaner. Press the left foot
pedal to release the head. Lower the handle until
the vacuum cleaner is lying flat on the floor.
2. Turn the vacuum cleaner over, so that the
agitator is facing up.
3. Set the agitator on a cloth or a smooth surface.
Remove the six screws on the bottom of the
head and remove the cover.
4.
Carefully remove any accumulated string, hair,
etc. from the agitator and the agitator area.
To reinstall the cover.
Reverse the steps above.
2
1
CARE & CLEANING
18
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
3. Wash the filter cleanly in flowing water.
4. Remove moisture.
5. Dry completely away from sunlight.
6. Make sure to push down on the filter until it locks
in place before closing the exhaust filter cover.
Replacing the Agitator Belt
If the belt breaks, follow the steps below to replace
the agitator belt.
To Replace the Belt:
1. Remove the agitator brush cover as described
on page 18.
2. Lift the agitator straight out.
3. Unhook the old belt from the drive pulley.
Make sure no pieces of the broken belt are
trapped in the agitator or drive pulley area.
4. Hook the new belt over drive pulley of agitator
motor.
5. Fit the agitator through the belt, making sure
the belt is aligned with the pulley section of the
agitator.
6. Lower the agitator into place, making sure the
oval shaped tabs fit into the indents on the head.
7. Reinstall the agitator brush cover as described
above.
For a replacement belt, order LG service center
belt part # MAS61843401.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
CARE & CLEANING
19
ENGLISH
If you notice a loss in suction, first check the filters
as described on pages 17 and 18. If the filters are
clean, there may be a clog.
The arrows show areas where clogs are most likely
to occur.
To check for clogs:
1. Check the hose where it connects to back of the
body by pressing the two buttons on the end of
the hose.
2. Release the hose assembly from the vacuum
cleaner. Separate the hose and wand by pressing
the button on the top of wand and check the hose
and wand for clogs.
3. Remove the dust tank and check the dust tank
inlet and body inlet where it connects to the
vacuum cleaner body.
4. Check the hose where it connects body to head
by turning the connector on the bottom of the body.
5. Turn the vacuum cleaner over, Check the agitator
inlet.
Removing Clogs
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
CARE & CLEANING
20
WARNING
Cleaning the Exterior of the
Vacuum Cleaner
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
Wipe the exterior of the vacuum cleaner with a
clean, soft cloth that has been dipped in water
and wrung dry.
DO NOT allow water to enter any openings in the
vacuum cleaner.
DO NOT clean tools in dishwasher or clothes
washer. Wash tools in warm soapy water, rinse
and allow to air dry completely.
DO NOT use tools if they are wet.
CARE & CLEANING
21
ENGLISH
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service or repair needed, other than as described in this User’s Guide, should be performed through
your local LGE service center.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before servicing.
Failure to do so could result in electrical shock or personal injury.
WARNING
PROBLEM
Vacuum cleaner
will not run
Poor dirt pickup
Agitator does not
turn
• Unplugged at wall outlet.
• Agitator motor overload
protection activated.
• Thermal overload protection
activated.
• Full or clogged dust tank.
• Dust tank improperly installed.
• Clogged hose or wand.
• Belt broken/not installed properly.
• Agitator motor overload protection
activated.
• Hole in hose.
• Worn agitator.
• Switch is off.
(unit is in bare floor mode)
• Cleaner is in upright position.
• Agitator motor overload protection
is tripped. (brush is jammed)
• Belt is broken.
• Make sure cord is plugged into a functioning
outlet.
• Allow the vacuum cleaner to cool down.
[See page 14]
• Empty dust tank and clean filters.
[See page 16,17,18]
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs. [See page 20]
• Check belt and replace if needed.
[See page 19]
• Unplug the vacuum cleaner and check the
agitator for obstructions.
Press the reset button. [See page 14]
• Inspect hose carefully. Replace if needed.
• Contact service.
• Turn on agitator power switch.
[See page 10]
• Press the Body release and tilt unit back.
[See page 10]
• Unplug the vacuum cleaner and check the
agitator for obstructions and reset the unit.
[See Page 14]
• Unplug the vacuum cleaner and check the
agitator for obstructions and reset the unit.
[See Page 14]
• Replace belt. [See page 18,19]
POSSIBLE CAUSE POSSIBLE SOLUTION
TROUBLESHOOTING
22
Loading...