LG Electronics Inc. |
1 |
13-12-16 |
1.Installation Guide for GEN10NADNA
This part establishes the installation guide for GEN10NADNA. Description of installation is shown as below:
1.Number : Top cover(Housing PBT GF 15%)
2.Number : TCU Shield plate for EMC of VCP device.
3.Number : TCU (Telematics Control Unit) : Power board
4.Number : GEN10NADNA module(CDMA/GSM/WCDMA/LTE Telematics NAD module)
5.Number : TCU main connector bracket.
6.Number : Bottom cover (Housing metal plate)
1/12
LG Electronics Inc. |
2 |
13-12-16 |
[Fig.2] VCP [module(NAD) + Power board(TCU) + Housing] setting information (Full Assembly)
<Front View> |
<Rear View > |
2/12