LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
CDMA Fixed Wireless Terminal
User Guide
Model: LST-230(F) & 2300(F)
2
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
|
|
|
REVISED HISTORY |
||
|
|
|
|
|
|
|
DATE |
ISSUE |
CONTENTS OF CHANGES |
S/W VERSION |
|
|
|
|
|
|
|
|
2000.02 |
ISSUE 1 |
Initial Release |
|
|
|
|
|
|
|
|
Please read this manual before you use this product. This manual is based on the production version of LST230(F)/2300(F) FWT. Software changes may have occurred after this printing.
LGIC reserves the right to make changes in technical and product specifications without prior notice.
3
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
Blank Page
4
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
|
|
Table of Contents |
|
1. |
Before You Start ..................................................................................................... |
7 |
|
|
1.1 |
Safety Information ..................................................................................................................... |
7 |
|
1.2 |
Optimal Phone Performance ..................................................................................................... |
7 |
|
1.3 |
Care and Service....................................................................................................................... |
8 |
2. |
Introduction............................................................................................................. |
9 |
|
|
2.1 |
Front View of the Terminal....................................................................................................... |
10 |
|
2.2 |
3 LEDs Indicators .................................................................................................................... |
11 |
|
|
STEP I. Check Components .................................................................................................... |
11 |
|
|
STEP II. Place the Terminal ..................................................................................................... |
12 |
|
|
STEP III. Connect Components ............................................................................................... |
12 |
|
|
STEP IV. Check LED indicators ............................................................................................... |
12 |
|
|
STEP V. Install of Wall Mounting.............................................................................................. |
12 |
|
2.3 |
Installation Steps ..................................................................................................................... |
14 |
3. |
Basic Operation .................................................................................................... |
15 |
|
|
3.1 |
Power On................................................................................................................................. |
15 |
|
3.2 |
Placing a call ........................................................................................................................... |
15 |
|
3.3 |
Receiving a call ....................................................................................................................... |
15 |
|
3.4 |
Ending a call ............................................................................................................................ |
15 |
|
3.5 |
Warning Tone after Remote Disconnect.................................................................................. |
15 |
|
3.6 |
Dial Delay(Enblock mode only) ............................................................................................... |
15 |
|
3.7 |
Emergency Call(Enblock mode only) ...................................................................................... |
16 |
4. System Features................................................................................................... |
17 |
||
|
4.1 |
Hook flash................................................................................................................................ |
17 |
|
4.2 |
Dial Delay Time(Enblock mode only) ...................................................................................... |
17 |
|
4.3 |
ROH (Receiver Off Hook)........................................................................................................ |
17 |
|
4.4 |
Special Cellular Services......................................................................................................... |
17 |
|
4.5 |
Applications ............................................................................................................................. |
18 |
5. Programming ........................................................................................................ |
19 |
||
|
5.1 |
Speed Dial(Enblock mode only) .............................................................................................. |
19 |
|
|
Storing the Speed Dial Number ................................................................................................ |
19 |
|
|
Enable or Disable Speed Dial ................................................................................................... |
19 |
|
|
Operation................................................................................................................................... |
20 |
|
5.2 |
Emergency Call(Enblock mode only) ...................................................................................... |
20 |
|
|
Entering the emergency phone number.................................................................................... |
20 |
|
|
Enable or Disable emergency call............................................................................................. |
20 |
|
5.3 |
Hot Line(Enblock mode only) .................................................................................................. |
20 |
|
|
Programming the Hot Line number ........................................................................................... |
20 |
|
|
Enable the Hot Line Feature ..................................................................................................... |
20 |
|
|
Disable the Hot Line Feature..................................................................................................... |
21 |
|
|
Programming the Hot Line Time ............................................................................................... |
21 |
|
5.4 |
Alarm(Enblock mode only) ...................................................................................................... |
21 |
|
|
Entering Alarm Time (12-hour Mode)........................................................................................ |
21 |
|
|
Entering Alarm Time (24-hour Mode)........................................................................................ |
21 |
|
|
Disable Alarm Feature............................................................................................................... |
21 |
|
5.5 |
Volume Level ........................................................................................................................... |
22 |
|
|
Changing the Volume Level ...................................................................................................... |
22 |
|
5.6 |
Outgoing Call Lock(Enblock mode only) ................................................................................. |
22 |
|
|
Enable or Disable Outgoing Call Lock ...................................................................................... |
22 |
|
|
Changing Outgoing LOCK Code............................................................................................... |
22 |
|
5.7 |
G3 FAX Mode Setting.............................................................................................................. |
22 |
|
|
Enable or Disable G3 FAX mode .............................................................................................. |
23 |
5
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
6. |
Troubleshooting .................................................................................................... |
24 |
|
7. |
General Information .............................................................................................. |
25 |
|
|
7.1 |
LST-230(F) .............................................................................................................................. |
25 |
|
7.2 |
LST-2300(F) ............................................................................................................................ |
26 |
6
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
1. Before You Start
1.1 Safety Information
Warning
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water.
IMPORTANT
Before installing or operating this product, read this information..
1.2 Optimal Phone Performance
•Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may cause the telephone to operate at a higher power level than needed.
•For the best call quality, keep the antenna free from obstructions and point the antenna straight up.
•Do not use the unit with a damaged antenna. Have your antenna replaced by a qualified technician immediately. Use only a manufacturer-approved antenna. Non-approved antennas, modifications, or attachments could impair call quality, damage the phone.
•RF energy may affect improperly installed or inadequately shielded personal medical devices such as pace markers, hospital monitor. Consult the manufacturer of any personal medical devices to determine if they are adequately shielded from external RF energy. Turn your terminal OFF in health care facilities when any regulations posted in the areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
•If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the radio or television and the telephone.
-Connect the equipment into an outlet on a circuit different from that to which the
terminal is connected.
- Consult you Authorized LGIC Dealer of an experienced radio/TV technician for help.
•Use only the battery, antenna and AC power supply provided by LGIC. Using any other type will invalidate the warranty.
•Only authorized personnel should service the phone and its accessories. Faulty installation or service any be dangerous and may invalidate the warranty.
•Do not use the unit in designated “no cellular phone use” area.
•Avoid exposure to high temperature or humidity.
•Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off immediately and remove the backup battery and AC power supply. If the unit is inoperable, then return to the service agent for service.
7
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
•Avoid shock or impact.
•We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery.
1.3 Care and Service
•Unplug the Telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
•If the unit fails for any reason, do not attempt to disassemble; contact the telephone service provider for assistance.
•If any of the following conditions exist: Unplug the unit at the wall plug, remove battery, and call the service provider.
-The power supply cord is damaged or frayed.
-Liquid has been spilled into the unit.
-The unit has been exposed to rain or water.
-The unit has been dropped or damaged.
-The unit does not work normally by following the operating instructions.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
8
LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
2. Introduction
Congratulations on your purchase of the LGIC Fixed Wireless Terminal that has been designed to operate on the latest digital mobile communications technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide various advanced features. The terminal enables the normal operation and direct connection of standard telephone equipment into the cellular network.
The standard unit provides:
•Dial tone;
•Touch tone (DTMF) or Pulse Dialing;
•Support Caller ID Telephone;
•Voice-Mail Notification ring-alerts you to new voice-mail messages;
•Ring voltage used to ring the telephone connected to the unit, with a Ringer Equivalence Number of 4;
•A phone jack to plug in the telephone equipment (RJ-11 Port);
•A phone jack to plug in the G3 FAX equipment (RJ-11 Port);
•DB9 Data Port for service and repair
•AC Power supply with barrel plug connector;
•Three lights (LEDs) to indicate the status of the unit;
•Dipole Antenna;
The LGIC Fixed Wireless Terminal can operate differently according to the system provider in the dialing manner. The first one is the “Enblock” mode and the second one is the “Overlap” mode. Please contact your service provider in which mode the LGIC Fixed Wireless Terminal is working.
Some features can not be supported by service provider’s policy and dialing method. For instance, the following features may not be supported in Overlap dialing mode;
-Dial Delay and Dial Delay Time
-Speed Dial
-Emergency Call
-Hot Line Call
-Alarm
-Outgoing Call Lock
Other features as determined by your service provider.
Note: Telephones with multiple terminating impedance should be set for 600ohms.
9