LG LNU5110R User guide

Specication

OWNER’S MANUAL

High Denition Network Camera

Please read this manual carefully before operating your set and retain it for future reference.

MODEL LNU5110R series

*MFL69458107*

Camera

Video / Audio

Event

Item LNU5110R series

Image Device 6.28 mm (1/3 Type) CMOS

Lens Type 3 mm to 9 mm F1.2

Day / Night ICR (Auto / Day / Night / External / Schedule)

Minimum Illumination

WDR Support

IR Distance 40 m

Image Enhancement

Compression H.264, H.264_High, MJPEG

Resolution

Maximum Frame Rate 60 fps @ 1280 x 1024

Multi-Streaming Up to 4

ROI (Region of Interest) Smart codec (Up to 8)

Video Analytics

Text Overlay Support

Audio Compression G.711, G.726

2-way Audio Support

Audio Detection Support

Event Trigger Video analytics, Audio detection, Alarm input

Event Notication Relay Out, Email, FTP

Pre Event Buering Support

Color: 0.03 lx @ F1.2 (1/30 sec, 50 IRE)

B/W: 0 lx @ IR LED on

Backlight Compensation, 2D+3D-DNR, De-fog, Exposure Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, Pivot, Smart IR

1280 x 1024 / 1280 x 720 / D1 (704 x 576) / CIF (352 x

240)

Motion detection, Tampering alarm, Face detection, Intrusion detection, Crossing line, Object counting, Object removal, Object desertion

Analog Out BNC out

Interface

Network

General

Note that design and specication of this unit may change from the manual as quality and improvement without prior notice.

Components

Camera, CD (Software and Owner’s Manual), Installation Manual, Test monitor cable, Anchor (3 EA), Wrench (1 EA), Tapping Screw (3 EA), Installation sticker, Sunshield and Fixing screw

Audio In / Out 1 In / 1 Out

Alarm In / Out 1 In / 1 Out

SD Slot micro SD (Up to 32 GB)

Ethernet RJ-45 10 / 100 BASE-T

Security

Open Protocol ONVIF 2.2 Prole S, PSIA 1.1

Protocol

Integrated Software

Connections Up to 20

Power Source AC 24 V, DC 12 V, PoE

Maximum Power Consumption

Maximum Input Current 670 mA (AC 24 V), 750 mA (DC 12 V), 200 mA (PoE)

Operation Temperature / Humidity

Protection IK10, IP66

Dimension (W x H x D) 92 mm x 90 mm x 339 mm

Weight 1.54 kg (with Sunshield 1.7 kg)

Password protection, HTTPS (SSL, TLS), IP ltering, IEEE 802.1X

IPv4 and IPv6 : TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, QoS, UPnP

IPv4 : FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)

LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, Android)

10.6 W

-10 ºC to 55 ºC / 0 % RH to 80 % RH

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user.

• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings.

Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. Warning: This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Warning: Please adopt the power adapter which can meet the safety extra low voltage (SELV )

standard. And source with DC 12 V or AC 24 V (depending on models) according to the IEC60950-1 and Limited Power Source standard.

Warning: Install the camera on a ceiling or wall where can withstand the weight of 5 times of the camera including mounting bracket.

Caution: This installation shall be made by a qualified service person and shall conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Make sure the power supply voltage is correct before using the camera.

Caution: Do not drop the camera or subject it to physical shock.

Caution: The sensor may be burned out by a laser beam, so when any laser equipment is being used, make sure that the surface of the sensor not be exposed to the laser beam.

Caution: While shipping, the camera should be packed in its original packing.

Caution: It is permitted to use ancillary equipment (e.g. A UPS) to prevent the damage from mains supply voltage reductions.

Note:

Please make sure the product is installed appropriate places where secured from flood, such as under the eaves, to operate properly. This product is certified as IP66 standard. However, if there is any flood concerns, it is highly recommended to use an outdoor Housing. When you install the camera inside an outdoor Housing, please use one of the following methods:

1. Remove the front glass of Housing before installing the camera.

2. To keep the front glass of Housing, remove the front cover, and then put the camera close to the front glass.

Disposal of your old appliance

1. This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream.

2. Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources.

3. You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/recycling

EuSP Ltd. Herald Way Pegasus Business Park Castle Donington, DE74 2TZ United Kingdom

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Символ «не для пищевой продукции» применяется в соответствие с техническим регламентом Таможенного союза «О безопасности упаковки» 005/2011 и указывает на то, что упаковка данного продукта не предназначена для повторного использования и подлежит утилизации. Упаковку данного продукта запрещается использовать для хранения пищевой продукции.

Символ «петля Мебиуса» указывает на возможность утилизации упаковки. Символ может быть дополнен обозначением материала упаковки в виде цифрового и/или буквенного обозначения.

Российская Федерация

Импортер ООО “ЛГ Электроникс Рус”

Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское,

Адрес производителя: ЛГ ЭЛЕКТРОНИКС (ХУЖОУ) ИНК., ЗАВОД ХАТАИ

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be cautious not to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to get cause of fire or electric shock.

• Remove dust or dirt on the surface of the lens with a blower.

• Use a soft and lint-free, dry cloth(such as glass cleaner) to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry.

• Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the surface finish and/ or impair the operation of the camera.

• This camera is designed for mounting on the ceiling or wall. If you install this camera upside down, it may cause malfunction.

Символ Кедендік одақтың 005/2011 техникалық регламентіне сәйкес қолданылады және осы өнімнің қаптамасын екінші рет пайдалануға арналмағанын және жоюға жататынын көрсетеді. Осы өнімнің қаптамасын азық-түлік өнімдерін сақтау үшін пайдалануға тыйым салынады.

Символ қаптаманы жою мүмкіндігін көрсетеді. Символ сандық код және/немесе әріп белгілері түріндегі қаптама материалының белгісімен толықтырылуы мүмкін.

86 км. Минского шоссе, д.9

ЛГ Электроникс (Хужоу) Инк., завод Хатаи 516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13.

Operating and storage location

Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations.

• Extremely hot or cold places (operating temperature -10 °C to 55 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C)

• Damp or dust place

• Places exposed to rain

• Places subject to strong vibration

• Close to generators of powerful

electromagnetic radiation such as radio or TV transmitters.

• Do not use the camera in such place where rapid temperature fluctuation by switching an air conditioner on and off.

Сделано в Китае

Part Names and Functions

Connection

a b c

i j mk n

d e f g h

a Lens Cover b Angle adjuster

Adjust the camera angle.

c Tilt adjuster

Adjust the tilt position.

d Pan adjuster

Adjust the pan position.

e Power input terminal

Connects to DC 12 V or AC 24 V power supply using proper cables. This camera must always be operated DC 12 V or AC 24 V. Certied/Listed Adaptor which comply with LPS.

AUDIO IN / OUT (Line Level Input / Output)

f g

ALARM IN & OUT / ALARM IN & OUT RETURN

Provides physical interface for sensor and Alarm/Relay.

h ETHERNET / PoE Port

Connects to a PC or a network via a hub with a 10 BASE-T / 100 BASE-TX cable attached RJ-45 connector.

Power over Ethernet (PoE) is a technology that integrates power into a standard LAN

infrastructure. It enables power to be provided to the network device, such as a network camera, using the same cable as that used for network connection. It eliminates the need for power outlets at the device locations and enables easier application of uninterruptible power supplies (LPS).

i IR LED

Do not stare at operating IR LED within hazard distances (1 m).

j IR Sensor k

RESET button

Push the button more than 3 seconds, this would restore the factory default network related settings.

Video Out Connector

Use this jack for checking the picture with portable monitor when install the camera.

m Jog button

Use this button for control the Zoom / Focus of the camera. (Left : Wide, Right : Tele, Up : Near, Down : Far, Push : Auto Focus)

micro SD card slot

Insert the micro SD card.

Precautions

• Be sure to switch o the unit before installation and connection.

• The installation should be made by qualied service personnel or system installers.

• Do not expose the power and connection cables to moisture, which may cause damage to the unit.

Connecting Network

You can control and monitor the system via network. With the remote control (monitoring), you can change the system conguration or monitor the image via network. After the installation, check the network settings for the remote control and monitoring work. Connect the IP camera to your network using a standard RJ-45 network cable as shown below.

ETHERNET With PoE

PoE Device

(IEEE802.3af )

Broadband

Service

Router

Broadband

Service

Connecting Power Source

Connect power, using one of the methods listed below:

To use the power adapter

Connect DC 12 V or AC 24 V power source to the power input terminal as shown below. (recommended power adapter is DC 12 V or AC 24 V / 1.5 A or above)

To use the PoE (Power over Ethernet) device

Connect the PoE cable to the LAN port on the unit. You must use the “IEEE802.3af” standard PoE device.

ETHERNET With PoE

PoE Device

(IEEE802.3af )

If the camera doesn’t work properly after

connecting PoE device, please check if the PoE device supplies enough power.

Connecting Alarm Device

Alarm terminals are used to connect the alarm (relay) devices such as sensors, door switches, etc.

ALARM IN & OUT / ALARM IN & OUT RETURN (Sensor Input/ Relay Output)

Connect the sensor device and alarm (relay) device to the alarm terminal. Alarm signal is outputted at an event occurrence.

Alarm (relay)

Device

Sensor Device

The Photo MOS Relay is rated for

100 mA at DC 20 V or 100 mA at AC 28 V.

Connecting Microphone and Speaker Device

Optionally connect an active speaker and/or external microphone with a built-in amplier.

Audio OUT

AUDIO OUT

AUDIO IN

Audio IN

• When the connecting Network,

Power and Alarm, tighten the screws as shown above.

• Keep the microphone away from the speaker to avoid howling.

Connecting Portable Monitor

Connect the portable monitor to the video jack using the test monitor cable.

Installation

Using the micro SD card

You can record your surveillance environment with the micro SD card even if the network is disconnected condition.

To insert the micro SD card

1. Open the Cover on the main body by loosening the screw.

2. Insert the micro SD card carefully as shown in the following illustrations. Make sure the micro SD card terminal position before insert the micro SD card. Push the back end of the micro SD card to x it at the last step.

Remove the micro SD card

1. Press the back end of the micro SD card to release the lock condition.

2. Take the micro SD card out carefully from the camera. It may cause a malfunction of the micro SD card or the micro SD card slot if you use the power too much at lock status.

• Do not use the power too much when you insert the

micro SD card. The micro SD card may be damaged.

• If you insert the micro SD card in the wrong position, the micro SD card may be damaged or it may cause the malfunction of the micro SD Card Slot.

• Keep the terminal part of the micro SD card in clean. Be careful the terminal part of the micro SD card not to dusty.

• As the micro SD card is consumable, the micro SD card end its days and may be not able to save data if you use it more than over certain times. In this case, replace micro SD card to buy a new one.

• Close the cover and fasten the screw securely using a screwdriver as shown below.

• If you install the micro SD card on the camera and remove with the micro SD card condition indicator lights on, you must unmount the micro SD card by using the [System > Storage > Device Management > Unmount] menu. The micro SD card data is compromised or the camera may not operate normally, if you remove the card without use [Unmount] function.

• LG Electronics is not responsible for deleted data caused by user mishandling when you insert or remove the micro SD card.

Recommended the micro SD card specication

Maker Capacity

Less than 32 GB 32 kbyteSandisk

Transcend

Speed of reading and writing more than 10 MB / Sec.

(Class 6)

Block Size

(FAT 32)

Mounting the Camera

1. Using a template as a guide, make a hole through the ceiling.

2. Connect the cables to the cable jacks of the camera body.

3. Install the camera by using Tapping screws to x it on the ceiling.

Connecting Waterproof processing of cable

Surely use the Butyl tape.

1. Connect the cables.

2. Bind the cables together with Butyl tape.

• The cables are not waterproofed completely. So seal the tube ends and the portions between cable cores as well as connecting portions with Butyl tape.

• If not using the Butyl tape, it may cause water absorption from a gap and nally condensation and water leakage.

Adjust the camera position

You should adjust the camera angle position as shown below illustration. Adjust the camera angle position by following step a and b.

1. Adjust the Pan.

2. Adjust the Tilt.

3. Adjust the Angle.

• The camera could be damaged by adjusting Pan, Tilt

by force.

• Camera can be damaged if you adjust the Pan / Tilt / Angle when the screw is xed.

• Be careful not to rotate the Pan and Angle more than 360°, it may damage the internal cable.

Assemble the Sunshield

Adjust the position of the Sunshield, then assemble the Sunshield.

*MFL69458107*