LG LNM1780NCUM User Manual

Download

Page 1

CAR NAVIGATION SYSTEM SIMPLE MANUAL

ENGLISH

DEUTSCH

FRAN󳚲AIS

ESPA󳚼OL

ITALIANO

NEDERLANDS

䦪䦭䦫䦫䦤䦢䦣

SVENSKA

PORTUGU󳚵S

DANSK

󳛷E󳝋TINA

POLSKI

SLOVEN󳛷INA

T󳛇RK󳚲E

KOREAN

NORSK

MAGYAR

Page 2

Precautions for safety

Safety Notes

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product䳓s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Always operate the vehicle in a safe manner. Do not be distracted by the vehicle while driving and always be fully aware of all driving conditions. Do not change settings or any functions. Pull over in a safe and legal manner before attempting such operations.

To promote safety, certain functions are disabled unless the parking brake is on.

To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.

To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture.

When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside.

Do not drop it and avoid heavy impacts at anytime.

The driver should not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.

Page 3

Table of contents

Precautions for safety 2

Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of contents 3

Name of each component 4

Head unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Steering wheel remote control . . . . . . . . . . . . . 6

Radio operation 7

Listening to AM radio . . . . . . . . . . . . . . . . . . . . .7

Listening to DAB(option)/FM . . . . . . . . . . . . . . .7

USB Operation 8

Playing USB music . . . . . . . . . . . . . . . . . . . . . . . .8

iPod Operation 10

Playing iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Bluetooth® audio 11

Playing Bluetooth audio . . . . . . . . . . . . . . . . . .11

Searching for destination 12

Address Search . . . . . . . . . . . . . . . . . . . . . . . . .12

POI (Points of interest). . . . . . . . . . . . . . . . . . .12

Kia service . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Coordinates . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Previous destinations . . . . . . . . . . . . . . . . . . . .14

Address book . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Load tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

My POI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Home, Office, Favourites . . . . . . . . . . . . . . . . .16

Bluetooth® Wireless Technology 17

Pairing and connecting the unit and a

Bluetooth phone . . . . . . . . . . . . . . . . . . . . . . . .17

Making a call by entering phone number . . . .18

Making a call by redialling . . . . . . . . . . . . . . . .18

Answering/Rejecting a call . . . . . . . . . . . . . . . .18

Switching call to the mobile phone . . . . . . . . .18

Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Using the menu during a phone call . . . . . . . .19

Callin g list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Connected Services 21

Before using Connected Services . . . . . . . . . .21

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Specification 25

Page 4

Name of each component

Head unit

1 2

1. RADIO button

Converts to the last played radio mode

(DAB(option)/FM,AM).

2. MEDIA button

If the playable media source is one, it moves to the corresponding screen. If the playable media sources are more than two, it moves to the [Media] screen you can select a media source. ([USB Music]/ [USB Image]/ [iPod]/ [Apple CarPlay]/ [AUX]/ [Bluetooth Audio]/ [Android Auto])

3. WSEEK/TRACKS button

‐ When it is pressed shortly

䳜 AM mode: plays previous/next available

frequency.

䳜 DAB(option)/FM mode: plays previous/

next available station existion within [List] menu. (If there is no or one station in [List] menu, the 䳖Auto tuning䳗 function is executed.)

䳜 MEDIA mode: plays previous/next file.

‐ When it is pressed and held

䳜 AM mode: plays previous/next available

frequency.

䳜 DAB(option)/FM mode: plays previous/

next available station existing within [List] menu.

䳜 MEDIA mode (except for Bluetooth,

AUX and Android Auto): rewinds of fast forwards the file.

4. 䳜 1 button

‐ Power on

Press this button in system OFF status.

‐ Power off

Press and hold this button in power ON status.

䳜 Volume control knob (-)

Turn counter clockwise or clockwise to control volume.

䳜 AV on/off

Press this button to turn AV on or off in power on status.

Page 5

Name of each component

5 6

7 8 9

10 11

5. Cover for protecting SD card (SD card insert slot)

Insert the SD card into the slot.

6. Reset hole

Press with thin object to reset the unit

when it does not operate normally.

7. MAP button

‐ Press to display the map screen of the

current location.

‐ Press to repeat the voice guidance on

the map screen. (Voice guidance for road names and numbers is not supported in some countries.)

8. NAV

Press to move to the navigation menu screen.

9. Custom button ( )

Press to go to the [Custom button

settings] menu. After setting, press to use desired function.

10. SETUP button

Press to go to the [Settings] menu.

11.

‐ AM mode: turn left/right to tune

manually.

‐ DAB(option)/FM mode: turn left/right

to search for a desired station and then press it.

‐ MEDIA mode (except for Bluetooth, AUX,

Apple CarPlay and Android Auto): turn left/right to search for the desired file and press it.

‐ Navigation mode: turn left/right to

change the map scale on the map screen.

button

Page 6

Name of each component

Steering wheel remote control

1 2 3 4

5 6

1. button

䳜 Each time this button is pressed, the

Radio or Media mode is changed. You can select the modes to toggle in settings.

䳜 If the media is not connected, it is

changed in the order DAB(option)/FM → AM → DAB(option)/FM.

2. button

Press to switch to voice recognition mode

when the phone supporting Android Auto/Apple CarPlay function is connected. To cancel it, press the button again.

3. 䳜 Volume ( / ) button

Increases or decreases the volume level.

䳜 button

Press to mute the sound. (It will be paused

in some media modes.)

4. / button

‐ When it is pressed shortly

䳜 Radio (DAB(option)/FM, AM) mode: plays

previous/next favourites.

䳜 MEDIA mode: plays previous/next file.

‐ When it is pressed and held

䳜 AM mode: plays previous/next available

frequency.

䳜 DAB(option)/FM mode: plays previous/

next stations.

5. button

Press to operate Bluetooth Hands-Free

6. button

䳜 MEDIA mode (except for Bluetooth,

AUX and Android Auto): rewinds or fast forwards the file.

function.

䳜 Press to accept a call. 䳜 Press to make a call from last calls. 䳜 Press and hold for redialling.

䳜 Press to end the phone call during a call. 䳜 Press to reject the call in the incoming call

screen.

Page 7

Radio operation

Listening to AM radio

1. Press "RADIO" on the head unit.

2. Press [AM] on the screen.

The AM screen of the most recent listened

station is displayed.

Note

Each time the 䳖RADIO䳗 button on the head unit is pressed, the mode is changed in the order AM → DAB(option)/FM → AM.

3. Auto tuning:

Press [

unit.

Manual tuning: Turn 䳖

Favourites tuning:

Press [Favourites]. Press the favourites numbers of the desired broadcast station.

SEEK/TRACKS] on the head

‐ Plays previous/next available station.

䳗 (counter)clockwise.

‐ The frequency moves up and down

accordingly.

Listening to DAB(option)/FM

1. Press "RADIO" on the head unit.

2. Press [DAB/FM] or [FM] on the screen.

The DAB(option)/FM screen of the most

recent listened station is displayed.

Note

Each time the "RADIO" button on the head unit is pressed, the mode is changed in the order DAB(option)/FM → AM → DAB(option)/FM.

3. Auto tuning (When there are no or one

station in [List] menu):

䳜 Press [

unit.

List tuning (When there are two or more

stations in [List] menu):

䳜 Press [

unit.

Manual tuning:

䳜 On the FM mode, press [Menu] > [Manual

tune FM].

SEEK/TRACKS] on the head

‐ Plays previous/next available station.

SEEK/TRACKS] on the head

‐ Plays previous/next available station

existing within [List] menu.

Station bar

Favourites:

‐ Drag the station bar to the left/right to

find the radio station that you want.

‐ Press [

C/V

䳜 Turn 䳖

then press it when the desired station is displayed in a highlighted colour.

䳜 Press [Favourites]. Press the favourites

numbers of the desired broadcast station.

䳜 Press [

S/W

remote control.

䳗 to the left/right and

] on the steering wheel

Page 8

USB Operation

Playing USB music

You can play music files stored in a USB memory device.

Connect a USB device to the USB port and playback starts automatically.

Note

To play USB music while a different source is playing, press [MEDIA] > [USB Music].

Pause

You can pause the playing file. Press [M] during playback. Press [

] to play it again.

Skip

You can play the previous or next file.

Position Description

Screen 䳜 Press [

䳜 Pressing [

seconds of playback time plays the current file from the beginning.

Head unit 䳜 Press [

䳜 Pressing [TRACK

3 seconds of playback time plays the current file from the beginning.

C/V

] after 3

SEEK/TRACKS].

] after

You can fast rewind/forward to a specific point of a file.

Position Description

Screen Press and hold [

then release at the point you want.

Head unit Press and hold [WSEEK

TRACKS] and then release at the point you want.

] and

Page 9

USB Operation

Repeat

You can play a set of files repeatedly.

1. Press [

2. Select the desired mode by pressing [

䳜 [ 䳜 [

current folder.

䳜 [ 䳜 [

within the [Artist], [Song], [Album], or [Recently added].

] repeatedly.

]: Plays all files sequentially. ]: Repeats all files within the

]: Repeats the current file, only. ]: Plays the files sequentially

Shuffle

You can play files in random order.

1. Press [

2. Press [ ] again to turn shuffle off.

Page 10

iPod Operation

Playing iPod

1. Use iPod exclusive cable to connect iPod to USB connector.

2. Press [MEDIA].

To play iPod while a different source is

playing, press [MEDIA] > [iPod].

Pause

You can pause the playing file. For details refer to page 8 (䳖Pause䳗).

Skip

You can play the previous or next file. For details refer to page 8 (䳖Skip䳗).

You can fast rewind/forward to a specific point of a file. For details refer to page 8 (䳖Search䳗).

Repeat

You can play a set of files repeatedly.

1. Press [

2. Select the desired mode by pressing [

䳜 [ 䳜 [

] repeatedly.

]: Plays all files sequentially. ]: Repeats the current file, only.

Shuffle

You can play files in random order.

1. Press [

2. Press [ ] again to turn shuffle off.

Page 11

Bluetooth® audio

Playing Bluetooth audio

䳜 Music stored in the mobile phone can be

played in the car through Bluetooth audio streaming.

䳜 Bluetooth audio can be played only when a

Bluetooth phone or Bluetooth audio device has been connected. To play Bluetooth audio, connect the Bluetooth phone to the car system. For more information on connecting Bluetooth, please refer to the owner䳓s manual [Pairing and connecting the unit and a Bluetooth phone] on page 17.

䳜 If Bluetooth is disconnected while playing

Bluetooth audio, the audio stream will be interrupted.

䳜 The audio streaming function may not be

supported in some mobile phones. Only one function can be used at a time. You can not use the Bluetooth hands-free and the Bluetooth audio function at the same time. For example, if you convert to the Bluetooth hands-free while playing Bluetooth audio, the music stream is paused.

䳜 Playing music from the car is not possible

when there are no music files saved in the mobile phone.

Starting the Bluetooth audio

1. Connect your Bluetooth device to the head unit.

2. Press [MEDIA].

The Bluetooth audio screen is displayed.

Note

To play Bluetooth audio while a different source is playing, press [MEDIA] > [Bluetooth Audio].

Pause

Press [ ] during playback. Press [

] to play it again.

Skip

You can play the previous or next file. For details refer to page 8 (䳖Skip䳗).

Repeat

You can play a set of files repeatedly. Select the desired mode by pressing [

repeatedly.

]

Shuffle

You can play files in random order. Select the desired mode by pressing [

repeatedly.

Note

These features may not be supported in some Bluetooth devices.

]

Page 12

Searching for destination

Address Search

You can find the destination by searching for an address.

1. Press [NAV] > [Address].

2. Enter the name of the Country, City/ Postcode, Street/No., House number or Intersection corresponding to the desired destination.

3. Press [Set as destination].

4. Press [Start guidance].

Note

The destination is saved in the [Previous destinations] menu automatically. (Page 14)

POI (Points of interest)

You can set a POI as destination using different search methods.

1. Press [NAV] > [POI].

2. Tap on one of the search methods.

䳜 [Along route]: finds POI along route. 䳜 [Near current position]: finds POI near

current vehicle position.

䳜 [Near destination]: finds POI near

selected destination.

䳜 [Near scroll mark]: Search for POI䳓s

around the current cursor when the map scrolled.

䳜 [Name]: finds POI by the name of the

facility.

䳜 [Near city centre]: finds POI located in a

specific city.

Page 13

Searching for destination

Kia service

You can set the facilities of Kia dealers as destination.

Near current position

You can obtain search results near your current position.

1. Press [NAV] > [Kia service] > [Near current position].

䳜 Press [Distance], [Name] or [Category]

to arrange the list in distance, name or category order.

2. Press the preferred item from the list.

3. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Name

You can search for a Kia dealers by entering its name using the keypad.

1. Press [NAV] > [Kia service] > [Name].

2. Select the preferred country.

3. Enter the dealer name and press [OK].

4. Press the preferred item from the list.

5. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Note

The information for the dealers facilities may not correspond with a result of map information, since the information can be provided up to date.

Coordinates

You can find a destination by entering the coordinates of latitude and longitude.

1. Press [NAV] > [Coordinates].

2. Press [D˚M䤎S˝], [D˚M䤎] or [Decimal].

3. Enter the coordinates and press [OK].

4. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Page 14

Searching for destination

Previous destinations

You can select one of the locations you have previously searched for as a destination, tourpoint and start point.

1. Press [NAV] > [Previous destinations].

䳜 Press [Date], [Name] or [Category]

to arrange the list in date, name or category order.

䳜 Press [Menu] > [Delete] to delete the

previous destinations. Select the desired item, then press [Delete] > [Yes].

‐ [Mark all]: Marks all items. ‐ [Unmark all]: Unmarks all items.

2. Press the preferred item from the list.

3. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Address book

You can select destination from a location saved in the [Address book] menu. To utilize this function more effectively, destinations that you often travel to should be saved in advance.

First of all, store in the [Address book] menu through destination search function.

1. Press [NAV] > [Address book].

䳜 Press [Date], [Name] or [Category]

to arrange the list in date, name or category order.

2. Press the preferred item from the list.

3. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Load tour

This function can be used to set a route with several tour points.

You can find the destination to a location saved in the [Load tour] menu. To utilize this function more effectively, destinations that you often travel to should be saved in advance.

Searching for tour

1. Press [NAV] > [Load tour].

䳜 Press [Date] or [Name] to arrange the

list in date or name order.

2. Select the desired item.

3. Press [OK] > [Start guidance].

Page 15

Searching for destination

Deleting the tour

1. Press [Menu] > [Delete] in load tour list.

2. Select the desired item, then press [Delete] > [Yes].

䳜 Press [Date] or [Name] to arrange the

list in date or name order.

䳜 [Mark all]: Marks all items. 䳜 [Unmark all]: Unmarks all items.

My POI

This function is used to import personal POI data including the map information (position, name...) saved in USB memory device. Afterwards the data can be selected as destination through the My POI menu.

Note

Supported POI group formats 䳜 POI group format: 䳖.kml䳗/ 䳖.gpx䳗

Importing the POI data

1. Store the POI file including map information (position, name...) from web map in USB memory device.

2. Connect the USB device to the USB port.

3. Press [NAV] > [My POI] > [

Or press [SETUP] > [Navigation] > [My

data] > [Import My POI from USB].

4. Press [Yes]. The list of POI groups are displayed.

5. Select the desired POI file.

䳜 Press [Mark all] to select all POI groups. 䳜 Press [Unmark all] to unmark all POI

groups.

6. Press [Import]. The POI groups is imported.

Page 16

Searching for destination

Notes

䳜 If data stored to the USB use a different

coordinate system with the current system, the importing position might be different from existing one.

䳜 Make sure that the POI data is normally

imported.

Finding a destination by My POI

1. Press [NAV] > [My POI].

2. Select the POI group. The list of POI is displayed.

3. Press the preferred item from the list.

4. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Note

The destination is saved in the [Previous destinations] menu automatically. (Page 14)

Home, Office, Favourites

If your home location, office location, and favourite locations have been already in the [Favourites] menu they can be easily retrieved by tapping on them.

First of all, store home, office or favourites in the [Favourites] menu through destination search function.

Registering Home, Office or Favourites

1. Press [NAV] > [Favourites].

2. Press [Home], [Office], or [Favourite (1~6)].

3. Select the desired position through destination search function.

4. Press [OK] when the destination search is complete.

5. Input the desired name and press [OK]. It is saved in the [Favourites] menu

automatically.

Finding your Home, Office, or Favourite place

1. Press [NAV] > [Favourites] > [Home], [Office], or favourite place.

2. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Page 17

Bluetooth® Wireless Technology

Pairing and connecting the unit and a Bluetooth phone

To use the Bluetooth feature, make sure the Bluetooth on your phone is turned on. Refer to your phone䳓s user guide.

When no phones have been paired

Press [ ] > [All menus] > [Phone]. Or press [ control. 䳜 [Cancel]: Cancels Bluetooth connection.

2. In your phone, initiate a search for Bluetooth devices. (The default device name is KIA MOTORS.)

3. 1) If the SSP (Secure Simple Pairing) is not

2) If the SSP (Secure Simple Pairing) is

] on the steering wheel remote

supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.)

supported, press [Yes] on the pop-up screen of your Bluetooth device. (The pop-up screen may differ from the actual information of the Bluetooth device.)

4. Bluetooth device is connected. The mobile phone contacts and the calling

list are downloaded.

When the connection fails, failure message

is displayed on the screen.

When a phone is already paired

Press [ ] > [All menus] > [Phone]. Or press

] on the steering wheel remote control.

[

2. Press the device from the Bluetooth device list pop-up screen.

If you want to pair additional device, press

[Add new]. Follow the steps 3-4 of 䳖When no phones have been paired䳗.

When pairing additional device

1. i) When using [SETUP] button, press

[SETUP] > [Bluetooth] > [Bluetooth connections].

ii) When using [ ] button, press [ ].

2. i) Select the device you want to connect. ii) If there is no device you want to

connect, press [Add new].

3. In your phone, initiate a search for Bluetooth devices. (The default device name is KIA MOTORS.)

4. i) If the SSP (Secure Simple Pairing) is not

supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.)

ii) If the SSP (Secure Simple Pairing) is

supported, press [Yes] on the pop-up screen of your Bluetooth device. (The pop-up screen may differ from the actual information of the Bluetooth device.)

Page 18

Bluetooth® Wireless Technology

5. Bluetooth device is connected. The mobile phone contacts and the calling

list are downloaded.

When the connection fails, failure message

is displayed on the screen.

Making a call by entering

Answering/Rejecting a call

1. If there is an incoming call, a popup

2. Press [Accept] in the popup message or

To reject a call, select [Reject] in the popup

phone number

Connect your unit and Bluetooth phone before making a call.

1. Enter the phone number using the keypad on the phone screen.

2. Press [ the steering wheel remote control.

Note

If you press the wrong number, press [ ] to delete one digit of the entered number.

] on the phone screen or [ ] on

Making a call by redialling

Press and hold [ ] on the phone screen or [ ] on the steering wheel remote control.

Note

Redialling is not possible when there is no number in the dialled calls list.

Notes

䳜 If the Call-ID service is available, the caller䳓s

䳜 If caller䳓s phone number is saved in the phone

䳜 Upon receiving a call, the [Reject] function

Switching call to the mobile phone

message will appear.

] on the steering wheel remote control.

[

message or [ remote control.

phone number is displayed.

book, the caller䳓s name is displayed on the unit.

may not be supported in some mobile phones.

If you want to switch the call to the mobile phone while talking on the car hands-free, press [Use private] on the screen or press and hold [ control.

] on the steering wheel

] on the steering wheel remote

As shown below, the call is switched to the

mobile phone.

2. If you want to switch the call to the car hands-free while talking on the mobile phone, press [Use hands-free] on the screen or press and hold [ steering wheel remote control.

The call is switched to the car hands-free.

] on the

Ending a call

1. To end a call, press [ ] on the phone screen or [

remote control.

2. The call is ended.

] on the steering wheel

Page 19

Bluetooth® Wireless Technology

Using the menu during a phone call

When making a call, you can use the following menu items.

Position Description

Switches a voice call from the car hands-free to the mobile phone.

Ends a call.

Moves to a screen for entering ARS numbers.

Displays the Mic volume settings. You can adjust the in-call volume that the other party hears.

Displays the contacts list.

Callin g list

Making a call from calling list

1. Press [ ] on the phone screen.

2. Press [All], [Dialled], [Received], or

3. Press the entry you want to call.

Note

The calling list may not be saved in some mobile phones.

Contacts

Making a call from contacts

1. Press [ ] on the phone screen.

The contacts are displayed on the screen.

[Missed].

䳜 [All]: Displays all calling list. 䳜 [Dialled]: Displays the outgoing calling list. 䳜 [Received]: Displays the incoming calling

list.

䳜 [Missed]: Displays the missed calling list.

2. Select the contact you want to call from the list of contacts.

Page 20

Bluetooth® Wireless Technology

Searching by name or number

You can search contacts for the name or number that you enter.

1. Press [ phone screen.

2. Enter the name or number, press [OK].

3. Select the contact you want to call.

] > [Menu] > [Search] on the

Favourites

Calling Favourites

If the phone number has already been stored in the Favourites, it can be easily called by tapping on it.

First of all, add the phone number in the Favourites. Refer to the 䳖Adding as a Favourite䳗 on page 20.

1. Press [

2. Select the desired favourite.

] on the phone screen.

Adding as a Favourite

Up to 20 contacts can be added to [Favourites] menu.

1. Press [ screen.

] > [Add new] on the phone

2. Select one of the contacts.

3. Press [ ] > [OK].

Note

If the phone numbers have already been stored in the Favourites, you can add or delete them by pressing [Menu] > [Edit].

Page 21

Connected Services

Before using Connected Services

Connecting phone for using Connected Services

1. Activate a Wi-Fi hotspot on your mobile

What is Connected Services?

Connected Services use TomTom LIVE Service to allow users to receive additional information in their car navigation system through the mobile phone network.

Traffic

Delivers the most accurate traffic information every two minutes. If you set the destination, you can have recommendation to recalculate the route according to the traffic condition.

Weather information

Delivers weather information and forecast for five days, and delivers weather information of the major European cities on the map.

Speed Camera Alerts

Delivers camera alerts with accurate and timely speed warnings.

Live POI (Points of interest)

Delivers POI search results based on the real time location information.

2. Press [SETUP] > [Wi-Fi].

3. Press [Wi-Fi].

4. Press [Wi-Fi network list]. Select the

phone, and search for Wi-Fi networks. (For details refer to your mobile phone's user manual.)

Note

By creating a Wi-Fi Hotspot, you may incur additional data charges depending on your data plan, particularly when roaming. The battery of the mobile phone may drain quickly so consider charging the phone while using Connected Services.

desired Network. (If you want to connect the Wi-Fi Network manually, press [Add Wi-Fi network].

Note

When you connect the Network for the first time, the information sharing notice screen is displayed. Read carefully and then press [Agree].

Especially, you can connect a hidden Wi-Fi Network.)

Page 22

Connected Services

Features

Traffic

The current traffic/road event information is basically displayed on the traffic information list. This feature may not be supported depending on condition.

1. Press [

䳜 It is displayed only when there is traffic

䳜 The total delay time will be displayed

] > [ ] > [Traffic].

information along route after a route is set.

on title. This can be different from sum of each delay times due to roundingoff.

2. Press the desired items.

䳜 [Previous]/[Next]: Toggles through

different traffic events.

䳜 [Show on map]: Displays map screen for

selected area.

䳜 [Recalculate]: Recalculates the route by

reflecting traffic information.

Live POI (Points of interest)

You can set a POI as destination using different search methods.

Searching for POI by [Near current position] or [Near destination]

1. Press [ ] > [ ] > [Live POI].

2. Press [Near current position] or [Near destination].

䳜 [Near current position]: Searches POI

near current vehicle position.

䳜 [Near destination]: Searches POI near

selected destination.

3. Enter the desired POI (Points of interest) name and press [OK].

4. Select the desired destination.

5. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Searching for POI by [Near city centre]

1. Press [ ] > [ ] > [Live POI] > [Near city centre].

2. Enter the desired city name and press [OK].

3. Enter the desired POI (Points of interest) name and press [OK].

Page 23

Connected Services

4. Select the desired destination.

5. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Searching for POI by [Near scroll mark]

1. Perform a long press on the desired map area. The selected point will be centred on the screen and the scroll mark will be displayed.

2. Press [ (Custom button: information)] > [Live POI] > [Near scroll mark].

3. Enter the desired POI (Points of interest) name and press [OK].

4. Select the desired destination.

5. Follow the steps 3-4 of the 䳖Address Search䳗 on page 12.

Weather

This provides weather forecast for the next day including the current day, for the current position and destination.

1. Press [ position] or [Destination].

䳜 [Current position]: Displays weather

information in your current position.

䳜 [Destination]: Displays weather

information in your destination.

2. Press the desired list for more weather information.

] > [ ] > [Weather] > [Current

Setting Favourites

If your favourite locations have already been saved in the [Favourites] menu, you can check weather information for favourite locations easily.

1. Press [ [Favourites] > [Menu] > [Add].

2. Search the city name and select the desired city.

3. Press [Add to favourites].

] > [ ] > [Weather] >

Page 24

Connected Services

4. Press the desired list for more weather information.

Note

You can also add the current position or destination as favourites.

Press [ position] or [Destination] > [Menu] > [Add].

Deleting Favourites

1. Press [ ] > [ ] > [Weather] >

2. Select the desired item, then press [Delete]

] > [ ] > [Weather] > [Current

[Favourites] > [Menu] > [Delete].

> [Yes].

䳜 [Mark all]: Marks all items. 䳜 [Unmark all]: Unmarks all items.

Speed Camera Alerts

1. Press [SETUP] > [Navigation] > [Guidance].

2. Press [Camera alert] or [Danger zone alert]. The using notice screen is displayed. Read carefully and then press [Agree] to use the function.

Notes

䳜 The [Camera alert] or [Danger zone alert] is

displayed only when the Wi-Fi Network has been connected.

䳜 According to the country legislation, the

[Camera alert] might be changed to [Danger zone alert].

䳜 According to the country legislation, the

[Camera alert] or [Danger zone alert] might not be available.

3.Press [MAP]. The alert for speed camera appears about

onds or 100 m befor

10 sec point of arrival.

Notes

䳜 Depending on the region and the type of

speed camera, the image might differ.

䳜 You can request the related information

update by pressing the speed camera information icon.

- When the camera alert appears but there is no speed camera, you can report to TomTom to delete the camera information by pressing the speed camera image.

- When the speed camera appears but there is no camera alert, you can report to TomTom by pressing the speed camera report button.

e the camera

Page 25

Specification

Common

Bluetooth

DAB

Power Supply Operating Power DC 9 V ~ DC 16 V

Current Consumption

Dark Current Maximum 0.5 mA Operating Temperature Storage Temperature -40 󳚛C ~ +85 󳚛C Dimensions

(Head unit) Weight (Head unit) 2.06 kg

Supported Profile

Supported Bluetooth Specification

Frequency Range 2402 MHz ~ 2480 MHz Output (Class2) 1.0 dBm Number of Channels 79

Tuning Range

Sensitivity Range -95 dBm ~ 3 dBm Adjacent Channel

Selectivity Far Off Selectivity 45 dB

DC 12 V

Maximum 14 A (Internal amplifier)

Maximum 5 A (External amplifier)

-20 󳚛C ~ +70 󳚛C

mm (W) X

255.9 X

190.4

mm (D)

HFP 1.6, A2DP 1.2, AVRCP 1.5, PBAP 1.1

3.0

5 A (174.928 MHz) ~ 13F (239.200 MHz)

35 dB

163.8

mm (H)

AM Tuning range 522 kHz ~ 1620 kHz Usable Sensitivity 35 dBuV

Radio

TFT-LCD

䳜 Designs and specifications are subject to change without prior notice.

Signal-to-noise ratio Minimum 45 dB FM Tuning range 87.50 MHz ~ 108.00 MHz Usable Sensitivity 10 dBuV Signal-to-noise ratio Minimum 50 dB

Screen Size

Resolution 384,000 pixel Operating Method TFT (Thin Film Transistor) Viewing Angle Internal Lighting LED

203.2 mm (8 inches)

176.4 (W) x 99.36 (H) mm (Active area)

R/L/U/D 89 (Typ)

Page 26

FCC approval

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device should be installed and operated with minimum 20 cm between the radiator and your body.

Page 27

Support - Hotline

Web Site: http://www.navigation.com/kia

International Toll Free Number: 00800 18 23 53 22

Telephone number for all other countries (or if Toll Free numbers are not supported)

: +31 555 384 245

P/N: MFLXXXXXXXX

LG LNM1780NCUM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual