Included in the box with your phone are separate information leaflets. These
leaflets provide you with important information regarding your new device.
Please read all of the information provided. This information will help you to
get the most out of your phone, reduce the risk of injury, avoid damage to
your device, and make you aware of legal regulations regarding the use of
this device.
It’s important to review the Product Safety and Warranty Information guide
before you begin using your new phone. Please follow all of the product
safety and operating instructions and retain them for future reference.
Observe all warnings to reduce the risk of injury, damage, and legal
liabilities.
1
Table of Contents
2
Important Customer Information...............................................1
Table of Contents
Feature Highlight
Swivel features ...................................................................................................... 5
Installing the SIM card and memory card
Removing the memory card
Charging Your Phone
Turning Your Phone On and Off
Touch Screen
Getting to Know the Home Screen
Setting Your Lock Screen
Memory card encryption
Entering text
Capturing a Screenshot
Screen recording
Content sharing
Anti-Theft Guide
Open Source Software Notice Information
Regulatory Information (FCC ID number, etc.)
Trademarks
Laser Safety Statement
More information
Safety Information ........................................................................................... 149
Consumer Information about Radio Frequency Emissions.......................... 150
Consumer Information on SAR
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices
Caution! Avoid Potential Hearing Loss
TIA Safety Information
Part 15.19 Statement
Part 15.21 Statement
Part 15.105 Statement
Safety Information
FDA Consumer Update
LIMITED WARRANTY - USA .............................................. 180
... 155
Feature Highlight
Swivel features
Swivel Mode
You can swivel the product to use two screens. Swivel the product as
shown below.
swivel up
Use your right thumb to slightly push up the bottom of the main screen.
Main Screen
Second Screen
NOTES• Do not apply excessive force as the main screen opens semi-automatically.
• Be careful not to get your thumb jammed while pulling down the main screen.
5
Feature Highlight
6
Swivel Home
Swivel Home is the first screen that appears after swiveling the product. In
this mode, you can use the main screen and second screen homes
separately or together to utilize in various ways.
Main screen
Swivel Home
Second screen
Swivel Home
Main screen
The home screen of the main screen appears as below.
App icons
Choose and start an app by swiping over app icons left and right. Some
apps on the main screen can use both the main screen and second screen.
Feature Highlight
Configuring home screen
Touch and hold an empty space on the main screen. You can configure the
home screen.
Deleting app
icons
7
Configuring home
screen and
themes
Configuring
Swivel Home
Using app icons
Touch and hold an app icon. You can delete the app from the home screen
or use various app features immediately.
Second screen
The home screen of the second screen appears as below. Use the second
screen in various ways.
Quick access icons
Navigation bar
Feature Highlight
8
Second screen quick setting
You can drag the upper part of the second screen downward to open the
quick setting window.
You can tap EDIT to add or delete an icon on the quick setting
window or change the location.
Touch and hold an icon on the quick setting window and the
configuration screen will appear.
LG Touch Pad
Use LG Touch Pad
Tap LG Touch Pad to open LG Touch Pad.
Feature Highlight
Use with a
mouse
Use LG Touch
Pad
Once LG Touch Pad is activated in the second screen, a mouse key
appears on the main screen as in PC to move it and choose an icon
freely.
Using Grip Lock
You can touch Grip Lock to start Grip Lock.
Turn off Grip Lock
9
The second screen is locked when Grip Lock is selected.
You can unlock it by turning off Grip Lock.
Feature Highlight
10
Multitasking in the Swivel Mode
Swivel Mode allows you to use one app on both screens or use two apps
on each screen simultaneously.
NOTEThis feature may not be supported in some apps.
Enlarging videos
1. Tap Gallery on the main screen.
2. Choose a video you want to play and tap Play video.
3. Tap on the second screen.
The video controller screen appears on the second screen.
Open the video
controller.
Control the video on
the second screen
Expanding YouTube app
1. Tap YouTube on the main screen.
2. Choose the YouTube content you want to play and play it.
3. Tap on the second screen.
The Media Controller screen appears on the second screen.
Feature Highlight
Using Multi App
Once you select apps with the Multi App widget on the second screen,
you can use two apps simultaneously every time you tap the widget. Set
the frequently-used apps as Multi App.
1. Touch and hold an empty space on the second screen.
Set Multi App
2. Tap Multi app settings .
3. Scroll down the app list and select two apps to use as Multi App.
11
View Multi App
preview
Select two apps
Feature Highlight
12
4. The Multi App icon is created on the home screen of the second screen.
Use the Multi App icon
If you tap the Multi App icon on the second screen, two apps open
simultaneously on the main screen and the second screen.
NOTETo delete the Multi App icon, touch and hold the icon on the second screen, tap
Remove from, then tap Remove.
Feature Highlight
Camera features
Using the camera in the Swivel Mode
You can use the features specialized for the video recording when you use
the product in the Swivel Mode.
Gimbal mode
You can use the camera as if it is inserted in a gimbal. Record a video in the
Gimbal mode to minimize shaking.
1. Change the product to the Swivel Mode.
You can also start the Swivel Mode camera by swiveling the product
in the camera app.
2. Tap Camera on the main screen.
3. Select Gimbal mode by swiping camera modes.
4. Tap Record to start recording in the Gimbal mode.
SettingsResolution
Pan Follow mode
FPV mode
Follow mode
Sound effects
Photo mode list
Navigation bar
Flash settings
Refresh
Lock mode
Joystick
13
To take a photo while recording a video, tap Capture.
To pause the video recording, tap Pause. To resume the video
recording, tap
Record.
5. Tap Stop to end recording.
Feature Highlight
14
FPV (First Person
View) mode
Your rotations or movements are naturally reflected
so that you can record a video rhythmically and
dynamically.
The up/down and clockwise/anticlockwise rotations
are fixed and the angle moves left/right. It is
Pan Follow mode
efficient for capturing photos or videos when
walking up the stairs or moving in a car while
maintaining level.
The clockwise/anticlockwise rotations are fixed and
the angle moves up/down and left/right.
Follow mode
It is efficient for capturing photos or videos of an
overall appearance of a large subject such as a
concert or a building.
You can move the joystick in any direction you
Joystick
want, so that you can move the angle up/down and
left/right without rotating the camera while
minimizing blurriness.
Lock modeTouch and hold to lock the angle.
• Basic: You can record a video with a stable stereo
sound effect.
• ASMR Recording: Use it to amplify the sound of
Sound effects
the subject in the screen to record a video with
clear, small sounds.
• Voice Bokeh: Use it to record a video with
reduced surrounding sounds and emphasized
voice of a subject.
Feature Highlight
Taking Slo-mo
Make a fun video by controlling a movement speed. You can apply a motion
effect slower than normal.
1. Change the product to the Swivel Mode.
2. Tap Camera on the main screen.
3. Select Slo-mo by swiping camera modes.
4. Tap Part Slo-mo or All Slo-mo to select a duration of the slow
motion effect.
15
Set camera options
Choose duration
Part Slo-mo: Allows you to apply a slow motion effect to a specific
section of the video.
Tap Slo-mo at the moment where you want the slow motion
‾
effect to be applied. With a short-press, slow motion effect will be
Set flash option
applied for 0.5 second. With a long-press, slow motion effect will
be applied until you release your finger.
All Slo-mo: Allows you to apply a slow motion effect to the entire
video.
Feature Highlight
16
Time-lapse recording
You can record Time-lapse videos optimized for the situation.
Videos can be recorded with optimal speed and steady motion by analyzing
various shooting environments. The time-lapse speed can be automatically
adjusted according to the shooting target and environment.
You can also select the time-lapse speed manually.
1. Change the product to the Swivel Mode.
2. Tap Camera on the main screen.
3. Select Time-lapse by swiping camera modes.
Choose the screen magnification of the scene to be recorded on the
second screen.
Choose screen
magnification
Choose time-lapse
speed
Choose the Time-lapse speed on the second screen.
NOTEIf you select Auto, it automatically sets the speed suitable for the screen to be
4. Tap Record to record a video.
recorded.
You can change a zoom and time-lapse speed while recording.
If you tap the desired speed, the time-lapse speed is adjusted while
recording.
To pause the video recording, tap Pause. To resume the video
recording, tap
Record.
Feature Highlight
While recording a video, you may spread or pinch two fingers to zoom
in or out.
While recording a video, you may tap the desired area to adjust the
brightness.
5. Tap Stop to stop recording.
The recorded video will be saved in Gallery.
NOTES• Audio is not recorded during Time-lapse recording .
• You can tap Night T ime-lapse to record a Night Time-lapse video.
Taking a Dual-recording video
You can use front and rear cameras simultaneously to record a video. You
can save the videos from each camera either as one file or two separate
files.
1. Change the product to the Swivel Mode.
2. Tap Camera on the main screen.
3. Select Dual-recording by swiping camera modes.
The Front pop-up camera automatically pops up.
4. Tap Record to record a dual-recording video.
17
Front recording screen
Split view
Rear recording screen
PIP
Feature Highlight
18
You can touch and hold the main screen and drag to switch the
locations of the front and rear camera screens.
To pause the video recording, tap Pause. To resume the video
recording, tap
Record.
5. Tap Stop to end the recording.
NOTES• If you choose to save separately, the videos of the front and rear cameras are
WARNING! If you start Dual-recording mode, a built-in Front pop-up camera comes out. Do not
saved as separate files.
• If you choose to save as shown, the videos of front and rear cameras are saved in
one screen.
push or pull it with excessive force, or it may be broken.
Taking PIP (Picture in Picture)
If you tap in the control screen of the second screen, the recording
screen is switched to take a PIP (Picture in Picture).
If you tap Swap, you can switch the screen locations of front and rear
cameras.
You can touch and hold the PIP screen and drag it to one of the four
corners as desired.
Take PIP
Feature Highlight
Audio recording features
Video recording with specialized audio recording options
You can record a video using three different voice recording options to suit
your purpose.
1. Tap Camera and select Video by swiping camera modes.
2. Tap Microphone and select Basic, ASMR Recording, or Voice Bokeh
by swiping audio options.
Audio options
Basic
You can record a video with stable stereo sound.
ASMR Recording
With two sensitive microphones in the device, you can record an ASMR
video.
19
Feature Highlight
20
Voice Bokeh
You can emphasize the voice of a subject by reducing ambient noise.
To reduce ambient noise, drag the slide bar to .
Recording ASMR sounds
This feature allows you to record the audio clearly and precisely by
amplifying the sound from the microphones.
1. Tap LG folder > HD Audio Recorder and tap > ASMR.
2. Tap Record to record the audio.
To pause the recording, tap Pause. To continue the recording, tap
Record.
3. Tap Stop to end the audio recording.
LG 3D Sound Engine
LG 3D Sound Engine feature allows you to hear stereoscopic and optimized
sound. When playing music or video, you can enjoy stereoscopic and
immersive sound as if you were listening in the field.
1. Drag the notifications panel downwards.
2. Tap LG 3D Sound Engine to turn on or off the LG 3D Sound Engine
feature.
Or, tap
Sound Engine and tap ON/OFF to activate it.
NOTEIf you connect an external audio device such as an earphone or speaker to the
Settings > Sound > Sound quality and effects > LG 3D
product, a pop-up appears to turn on the LG 3D Sound Engine feature.
Feature Highlight
LG Pay
LG Pay overview
You can make a payment by touching the card reader with a mobile phone
that supports LG Pay.
You can use the LG Pay service by adding multiple credit, debit,
membership, gift cards, etc. to LG Pay.
Using LG Pay
This feature allows you to make payments quickly and easily using your
phone.
1. Run LG PayQuick by swiping left or right from any side of the screen.
OR
21
NOTES• The LG PayQuick cue appears on the side of the screen when a card is added to
LG Pay.
• Touch and hold the LG PayQuick cue to change the direction of swiping.
• To enable/disable the option, open LG Pay and tap Options > Settings > LG
PayQuick > Show LG PayQuick cue.
Feature Highlight
22
2. Select a card to use by swiping the cards left or right.
3. Authenticate by using your registered fingerprints or entering the
password for each card.
4. Make a payment by touching the LG Pay antenna area of the product on
a card reader within 50 seconds.
LG Pay antenna area
NOTES
• To change the LG PayQuick settings, tap Options > Settings > LG PayQuick in
the LG Pay app.
• If the navigation bar is set to Buttons only, swipe up from the bottom center of
the screen to run LG PayQuick.
• If the battery level is 5% or less, LG PayQuick will not run.
• The LG Pay app is not pre-loaded on this device. First, download it from Play Store.
• For further details, visit https://www.lg.com/us/lg-pay.
Feature Highlight
Google Assistant
Google Assistant overview
Your device has the built-in Google Assistant feature. Find answers and get
things done while on-the-go.
NOTETo use this feature, first connect to the network and sign in to your Google Account.
Accessing by Voice
1. On the Home screen, say “OK Google” or “Hey Google”.
2. When the Google Assistant screen appears, say a command or ask a
question.
Accessing from Home Screen or Any Other Screen
1. Swipe diagonally from a bottom edge of the screen.
2. Say a command or question when you see on the bottom of the
screen.
NOTEVoice recognition accuracy may decrease if you speak with an unclear voice or in a
noisy place. When you use the voice recognition feature, increase its accuracy by
speaking with a clear voice in a quiet place.
Fingerprint recognition
Fingerprint recognition overview
You must register your fingerprint on your device first before using the
fingerprint recognition function.
You can use the fingerprint recognition function in the following cases:
To unlock the screen.
To view locked contents in Gallery or QuickMemo+.
Confirm a purchase by signing in to an app or identifying yourself with
your fingerprint.
NOTEYour fingerprint can be used by the device for user identification. Ver y similar
fingerprints from different users may be recognized by the fingerprint sensor as the
same fingerprint.
23
Feature Highlight
24
Precautions for fingerprint recognition
Fingerprint recognition accuracy may decrease due to a number of reasons.
To maximize the recognition accuracy, check the following before using the
device.
At the bottom center of the product’s screen, there is a built-in sensor
that recognizes fingerprints. Be careful not to scratch or damage the
fingerprint sensor with metal objects such as coins or keys.
If you replace the protective film on the product with a polarized film that
diffuses the light or a film that is too thick, it may decrease the fingerprint
recognition rate.
If there are foreign substances (sweat, lotion, water, dirt, grease, etc.) on
the fingerprint sensor or on the finger to be put on the sensor, fingerprint
recognition may not work properly. Wipe the sensor and the finger clean
and remove all moisture before putting the finger on the sensor.
If the finger’s surface is rough due to it being scarred or pruney from
water, the sensor may not be able to recognize the fingerprint. In such a
case, register another finger’s fingerprint.
If you bend your finger or use the fingertip only, your fingerprint may not
be recognized. Make sure that your finger covers the entire surface of
the fingerprint sensor.
Scan only one finger for each registration. Scanning more than one finger
may affect fingerprint registration and recognition.
The device may generate static electricity if the surrounding air is dry. If
the surrounding air is dry, avoid scanning fingerprints, or touch a metallic
object such as a coin or a key before scanning fingerprints to remove
static electricity.
Feature Highlight
Registering fingerprints
You can register and save your fingerprint on the device to use fingerprint
identification.
1. On the home screen, tap Settings > Lock screen & security >
Fingerprints.
NOTES• This feature is available only when the screen lock is set.
2. Check the location of the fingerprint sensor at the bottom center of the
screen, and lightly place your finger on the sensor.
NOTEMake sure that the finger fully covers the fingerprint sensor.
3. Follow the on-screen instructions.
4. When the fingerprint registration is done, tap OK.
- Lock the device with a Pattern, PIN or Password.
• If the screen lock is not set, enable it by following the on-screen instructions. See
Setting a Screen Lock
Place your finger on the sensor and hold it until you feel a vibration.
Move the same finger around on the sensor a little by little until the
fingerprint registration is complete.
Tap Add more to register another fingerprint. If you register only one
fingerprint and the corresponding finger is not in a good condition, the
for details.
fingerprint recognition may not work well. As a preventative measure,
register multiple fingerprints.
25
Feature Highlight
26
Managing fingerprints
You can edit or delete registered fingerprints.
1. On the home screen, tap Settings > Lock screen & security >
Fingerprints.
2. Unlock according to the specified lock method.
3. From the fingerprint list, tap a fingerprint to rename it. To delete it, tap
Delete.
Displaying the fingerprint icon when the screen is off
You can set to display the fingerprint sensor location on the screen when
the screen is off.
1. On the home screen, tap Settings > Lock screen & security >
Fingerprints.
2. Unlock according to the specified lock method.
3. Ta p Tap to show icon when screen is off to enable the option.
Unlocking the screen with a fingerprint
You can unlock the screen or view locked content by using your fingerprint.
Activate the desired function:
1. On the home screen, tap Settings > Lock screen & security >
Fingerprints.
2. Unlock according to the specified lock method.
3. On the fingerprint settings screen, activate the desired function:
Screen lock: Unlock the screen with a fingerprint.
Content lock: Access locked contents in Gallery and QuickMemo+
with a fingerprint.
Tap to show icon when screen is off: Enable to show the fingerprint
icon when the screen is off.
Icon effect: Choose the effect that will show when you tap on the
Fingerprint icon.
Feature Highlight
Multi-tasking feature
Recent Uses Screen
Swipe Navigation bar upward and hold to view the recent use history.
Pop-up window
Pop-up window overview
You can open multiple apps on the screen and easily switch between them
at any time.
1. Swipe up and hold Navigation bar from the bottom of the screen.
2. Tap the app icon on the top left of the app screen and select Pop-up window.
If you tap the app icon, the App info, Multi window and Pop-up
window menus appear.
3. The app appears in the form of a pop-up window on the screen.
NOTEThis feature may not be available in some apps or screens.
Multi window
When using Gestures navigation (Default)
1. Swipe Navigation bar up and hold from the bottom of the screen.
Recently-used apps appear.
If you tap the app icon, the App info, Multi window and Pop-up
window menus appear.
27
Feature Highlight
28
2. Tap the app icon on the top left of the app to be displayed in the
multiwindow and select Multi window.
The selected app appears on the upper half of the screen.
3. Swipe the recently used apps left or right and tap an app to display on
the lower half of the screen.
The selected app appears on the lower half of the screen.
When using Buttons only navigation bar
1. Tap Recent apps on the navigation bar.
Recently-used apps appear. If you tap the app icon, the App info,
Multi window and Pop-up window menus appear.
2. Tap the app icon on the top left of the app to be displayed in the
multiwindow and tap Multi window.
The selected app appears on the upper half of the screen.
3. Swipe the recently used apps left or right and tap an app to display on
the lower half of the screen.
The selected app appears on the lower half of the screen.
NOTES
• To adjust the size of the split screen, drag Dividing bar. It is also possible to
close the multi-window by dragging the dividing bar up or down to the end of the
screen.
• The multi window feature is not supported in some LG apps or apps downloaded
from Play Store.
Phone Overview
Front View
Front pop-up
camera
Proximity/
Ambient light
sensor
NOTES• All screenshots in this guide are simulated. Actual displays may vary.
• Instructions to perform tasks in this guide are based on the default settings and
may change depending on the mode and software version on your phone.
WARNING!
• Some of the device parts are made of tempered glass. If you drop your device on
a hard surface or subject it to severe impact, the tempered glass may be
damaged. If this happens, stop using your device immediately and contact the LG
Authorized Service Center.
• Your phone is an electronic device that generates heat during normal operation.
Extremely prolonged, direct skin contact in the absence of adequate ventilation
may result in discomfort or minor burns. Therefore, use care when handling your
phone during or immediately after operation.
Earpiece
Volume buttons
Power/Lock button
Fingerprint sensor
USB/Charger port
The Basics
29
Loading...
+ 157 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.