LG LAS650M User Manual

SMART Hi-Fi AUDIO

Wireless Multi-room Sound Bar

Model : LAS650M (HS6)

ENGLISH | OWNER’S MANUAL

Please read this manual carefully before
operating your speaker and retain it for future
reference.

Getting Started2

Safety Information

1

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

magnitude to constitute a risk of electric shock to
persons.

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.

WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built­in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the

NOTICE: For safety marking information including
product identication and supply ratings, please
refer to the main label on the bottom or rear of the
apparatus.

CAUTION : Only use the AC adapter supplied
with this device. Do not use a power supply from
another device or another manufacturer. Using
any other power cable or power supply may cause
damage to the device and void your warranty.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon
a dedicated circuit;

That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible.

Getting Started 3

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery from the
equipment: Remove the old battery or battery

pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to
human and animal health, the old battery or
the battery put it in the appropriate container
at designated collection points. Do not dispose
of batteries or battery together with other
waste. It is recommended that you use local,
free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, re or the like.

yThe appliance is not intended for use by young

children or inrm persons without supervision.

yYoung Children should be supervised to ensure

that they do not play with appliance.

yIf the appliance is supplied from a cord extension

set or an electrical portable outlet device, the
cord extension set on electrical portable outlet
device must be positioned so that it is not
subject to splashing or ingress of moisture.

RF Radiation Exposure Statement

This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.

1

Getting Started

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information
6 Main Features
6 Introduction
7 Accessories
8 Front panel
8 Rear panel
9 Remote control
10 Installing the sound bar
10 Mounting the main unit on a wall

2 Connecting

12 Connecting the AC Adapter
12 Wireless subwoofer connection
14 Connecting to your TV
14 – Using an OPTICAL cable
14 – LG Sound Sync
15 – Using an HDMI cable
16 – Enjoy rich sound broadcast of the

channel with the sound bar
16 – What is SIMPLINK?
17 – ARC (Audio Return Channel) function
17 – Additional information for HDMI
18 Optional equipment connection
18 – HDMI connection
19 – PORT. (Portable) IN connection
19 – OPTICAL IN connection
20 Understanding Network Connection
20 – Basic Connection
20 – Group playback using Music Flow

Player app
21 Installing “Music Flow Player” App
22 – Starting with Music Flow Player app
23 Connecting the speaker to your Home

Network

23 – Connecting the speaker to your

network with a LAN cable
25 – Connecting the speaker to your

Network via the Wi-Fi Setup Method

(Android)
28 – Connecting the speaker to your

Network via the Wi-Fi Setup Method
(iOS)

32 Connecting the speakers to your Home

Network (Additional)

32 – Adding another speaker

3 Operating

35 Enjoying the Music with Music Flow Player

app
35 – Overview of Home menu
36 – Overview of the side menu
36 – Playing a song
38 – Overview of Playback
39 Different ways of listening to music
40 – Group Playback
41 – Surround playback
42 – Seamless playback
43 Setting the Speaker with Music Flow

Player app
44 – Overview of setting menu
44 – [General] Menu
45 – [Speakers] Menu
46 – [Alarms/Sleep Timer] Menu
46 – [Music Library] Menu
47 – [Account management] Menu
47 – [Update] Menu
47 – [Open source licenses] Menu
48 Using a Bluetooth Wireless Technology
48 – About Bluetooth
48 – Bluetooth profiles
48 – Listening to Music of a Bluetooth

Device

49 – NFC for Easy Pairing

(Android Only)
50 Other operations
50 – DRC (Dynamic Range Control)
50 – AV Sync
50 – Turn off the sound temporarily
50 – Displaying input source information
50 – Sleep timer setting
51 – Using your TV remote control
51 – AUTO POWER On/Off
52 Sound adjustment
52 – Adjust volume level automatically
52 – Adjust the woofer level settings
53 Using Media Server for PC

53 – Music Flow PC Software for windows
54 – Nero MediaHome 4 Essentials for

Mac OS
55 Standby mode
55 – Standby mode
55 – Network standby mode
55 Reset the Speaker
55 – Resetting the speaker

4 Troubleshooting

56 Troubleshooting
56 – General
57 – Network
58 – Application and PC Software

5 Appendix

59 File requirement
59 Trademarks and licenses
61 Specifications
63 Handling the Speaker
63 Important Information Relating to

Network Services

64 TERMS OF USE

Table of Contents 5

1

2

3

4

5

Some of the content in this manual may dier from Music Flow Player app depending on the
application’s version.

Getting Started6

Main Features

Made for iPod/iPhone/iPad or

1

Android device

Getting Started

Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.

LG Sound Sync

Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.

Portable In

Listens to music from your portable device.

Music Flow Player application

Listens to music stored on your smart device.

You can control this speaker with your iPod touch/
iPhone/iPad or Android device via Music Flow
Player app. This speaker and your smart device
must be connected to the same network. Visit
“iTunes store” or “Google Play Store” or use the QR
code shown below to search for “Music Flow Player”
app. For detailed information, refer to page 21.

Introduction

Symbol used in this manual

Note

,

Indicates special notes and operating features.

Caution

>

Indicates cautions for preventing possible damages
from abuse.

(Android OS)

yDepending on the application’s version and the

settings of smart device, Music Flow Player app
may not be operated normally.

ySome smart devices may not be compatible with

this speaker.

(Apple iOS)

Getting Started 7

Accessories

Please check and identify the supplied accessories.

Designs and specications of the accessories are
subject to change without prior notice.

Remote control (1) Batteries (2)

AC adapter (1) Power cord (1)

Wall bracket (2) Wall bracket install

guide (1)

LG Tag On sticker

1. Remove the battery cover on the rear of the
remote control.

2. Attach the supplied LG Tag On sticker on the
remote control. See the image below.

Refer to the pages 43 and 49 for how to

use.

1

Getting Started

Screws (2) Cable ties for arranging

LG Tag On sticker (1) Optical cable (1)

cables (2)

Getting Started8

Front panel

1

Getting Started

Display window

A

Remote sensor

B

LED indicator
Shows connection status.

C

Adds the speaker to your network. (page 32)

(Add)

(Wi-Fi)

D

Connects your speaker to your network. (page

25)

F (Function)

E

Selects the function and input source.

F p/o

G 1/!

(Volume)

Adjusts volume level.

(Standby/On)

- Power On

- Switching to the standby mode (page 55)

Rear panel

DC IN (AC adapter input)

A

S/W download connector (For service only)

B

HDMI IN / OUT : HDMI input / output

C

ETHERNET : LAN port

D

PORTABLE IN : Portable input

E

OPT. IN : Optical input

F

Getting Started 9

Remote control

Battery Installation

Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA)
batteries with 4 and 5 matched correctly.

• • • • • • • • • • a • • • • • • • • •

(Power) : Switches the unit ON or OFF. / Switches

1

to the standby mode.

FUNC : Selects the function and the input source.

(Mute) : Mutes the sound.

OPTICAL : Changes input source to OPTICAL
directly.

SOUND EFFECT : Selects a sound eect mode.

WOOFER LEVEL : Sets the sound level of woofer.

VOL o/p : Adjusts speaker volume.

• • • • • • • • • • b • • • • • • • • •

REPEAT : Listen to your music repeatedly.

CV
dM

playback.

• • • • • • • • • • c • • • • • • • • •

DRC : Turns on or o DRC function.

INFO : Displays the input source information.

AV SYNC : Synchronizes the audio and video.

SLEEP : Sets the system to turn o automatically at

a specied time.

AUTO VOL : Turns on or o the AUTO VOLUME
mode.

AUTO POWER : Turns on or o AUTO POWER
function. (Refer to the page 51.)

(Skip) : Skips Fast backward or Forward.

(Play/Pause) : Starts playback. / Pauses

(Shue) : Shues the music on the list.

Note

,

You can use these playback buttons after
play music by “Music Flow Player” App or PC
software.

1

Getting Started

Getting Started10

Installing the sound bar

1

You can hear the sound by connecting the unit to

Getting Started

the other device : TV, Blu-ray disc player, DVD player,
etc.

Place the unit in front of the TV and connect it to
the device you want. (Refer to pp. 14 - 19.)

You can place the wireless subwoofer anywhere in
your room. But it is better to place the subwoofer
near the main unit. Turn it slightly toward the center
of the room to reduce the wall reections.

Caution

>

For best performance of wireless connection
such as Bluetooth or wireless subwoofer,
do not install the unit on Metallic furniture
because wireless connection communicates
through a module positioned on the bottom
of the unit.

Mounting the main unit on a wall

You can mount the main unit on a wall.

Caution

>

Because it is dicult to make a connection
after installing this unit, you should connect
the cables before installation.

Preparation materials

Unit

Wall bracket install guide

Wall bracket

Screws

(Not supplied)

Screws (A)
Wall plug

Getting Started 11

1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach
to the position.

TV

2. When you mount it on a wall (concrete), use the
wall plugs. You should drill some holes. A guide
sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.

3. Remove the Wall bracket install guide.

4. Fix the brackets with screws (A) as shown in the
illustration below.

5. Put the unit on the brackets to match screw
holes on the bottom of the unit.

6. Fix the unit with the screws firmly.

Note

,

To detach the unit, perform it in reverse order.

Caution

>

yDo not install this unit upside down. It can

damage the parts of this unit or be the
cause of personal injury.

yDo not hang onto the installed unit and

avoid any impact to the unit.

ySecure the unit rmly to the wall so that it

does not fall o. If the unit falls o, it may
result in an injury or damage to the product.

yWhen the unit is installed on a wall, please

make sure that a child does not pull any of
connecting cables, as it may cause it to fall.

1

Getting Started

Note

,

Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.

Connecting12

Connecting the AC Adapter

Connect the speaker to the power supply with the
supplied AC adapter.

1. Connect the supplied AC power cord to the AC
adapter.

2. Connect the AC adapter cable to DC. IN adapter

2

Connecting

input.

3. Plug the AC power cord into an AC outlet.

Caution

>

Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.

Wireless subwoofer connection

LED indicator of wireless subwoofer

LED Color Status

Green
(Blink)

Green The connection is completed.

Red The wireless subwoofer is

O (No
display)

Setting up the wireless subwoofer
for the first time

1. Connect the power cord of the wireless
subwoofer to the outlet.

2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.

Manually pairing wireless subwoofer

When your connection is not completed, you can
see the red LED or the blinking of green LED on
the wireless subwoofer and the subwoofer does
not make sound. To solve the problem, follow the
below steps.

1. Adjust volume level of the main unit to
minimum.

-”VOL MIN” appears on the display window.

2. Press and hold (Mute) on the remote control
for about 3 seconds.

-“WL RESET” appears on the display window
briey.

The connection is trying.

in standby mode or the
connection is failed.

The power cord of wireless
subwoofer is disconnected.

3. If the LED of the wireless subwoofer already
blinks in green continually, you can skip this
step.

Press and hold PAIRING on the back of the

wireless subwoofer for more than 5 seconds.

-The LED of the wireless subwoofer lights up
alternately in red and green.

4. Disconnect the power cord of the main unit
and the wireless subwoofer.

5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned
off.

The main unit and the wireless subwoofer will

be paired automatically when you turn on the
main unit.

-When the connection is completed, you can
see the green LED on the subwoofer.

Note

,

yIt takes a few seconds (and may take longer)

for the main unit and the subwoofer to
communicate with each other and make
sounds.

yThe closer the main unit and the subwoofer,

the better sound quality. It is recommended
to install the main unit and the subwoofer
as close as possible (within 5 m) and avoid
the cases below.

-There is a obstacle between the main
unit and the subwoofer.

-There is a device using same frequency
with this wireless connection such as a
medical equipment, a microwave or a
wireless LAN device.

Connecting 13

2

Connecting

Connecting14

Connecting to your TV

Please connect with this unit and TV using the
optical digital cable or HDMI cable considering the
state of the TV.

Using an OPTICAL cable

1. Connect the OPT. IN jack on the back of the

2

Connecting

unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.

2. Set the input source to OPTICAL. Press

repeatedly FUNC on the remote control or
F on the unit until the function is selected.

To directly select the OPTICAL function, press

OPTICAL on the remote control.

Note

,

yYou can enjoy the TV audio through the

speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)

ySet up the sound output of TV to listen to

the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]

yDetails of TV setting menu vary depending

on the manufacturers or models of your TV.

Optical cable

LG Sound Sync

You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.

Controllable function by LG TV’s remote control :
Volume up/down, mute

Refer to the TV’s instruction manual for the details
of LG Sound Sync.

Make one of the following connections, depending
on the capabilities of your equipment.

Note

,

yYou can also use the remote control of

this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.

yWhen the connection fails, make sure of the

condition of the TV and power.

yMake sure of the condition of this unit and

the connection in the cases below when
using LG Sound Sync.

-Turn o the unit.

-Changing the function to the others.

-Disconnecting the optical cable.

yThe amount of time to turn o this unit is

dierent depending on your TV when you
set AUTO POWER function to ON.

Connecting 15

With wired connection

1. Connect your LG TV to the unit by using an
optical cable.

Optical cable

2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]

3. Turn on the unit by pressing 1 (Power) on the
remote control.

4. Select OPTICAL function by using FUNC on
the remote control or F on the unit until the
function is selected.

You can see “LG OPT” on the display window

if connecting normally between this unit and
your TV.

Note

,

Details of TV setting menu vary depending on
the manufacturers or models of your TV.

Using an HDMI cable

If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can
enjoy the TV audio through the speakers of this unit
without connecting the optical cable.

Connect the HDMI OUT jack on the back of the unit
to ARC jack on the TV using an HDMI cable.

HDMI cable

Note

,

yHDMI CEC (Consumer Electronics Control):

Using a single remote control, you have the
ability to operate CEC compatible devices
(TV, Sound Bar, Blue-ray player, etc.)

yYou can also enjoy extra functions such as

Bluetooth with FUNC on remote control
or F on this unit. When you go back to live
TV channel after using the extra functions
(Bluetooth) of this audio system, you should
choose your preferred speaker on TV to
enjoy the sound from this audio system
again.

2

Connecting

Connecting16

HDMI cable Checklist

Some HDMI cables do not support the ARC
function, this can result in no sound output.

When connecting this unit to the TV, if there is no
sound, there might be a problem with the HDMI
cable. Therefore connect this unit to the TV and
check whether the Type A, High speed HDMI™
Cable with Ethernet.

2

Connecting

STANDARD HDMI CABLE WITH ETHERNET

HIGH SPEED HDMI CABLE

HIGH SPEED HDMI CABLE WITH ETHERNET

Enjoy rich sound broadcast of the channel with the sound bar

Connection through HDMI Cable

Your television must support the newest HDMI
features (HDMI CEC1) / ARC (Audio Return Channel))
to fully enjoy the Live broadcasting channel with
audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system
should be connected through an OPTICAL cable.

1) HDMI CEC (High-Denition Multimedia Interface
Consumer Electronics Control)

Consumer Electronics Control (CEC) is an HDMI
feature designed to allow the user to command
and control the CEC-enabled devices, that are
connected through HDMI by using only one of
their remote controls.

Trade names for CEC are SimpLink (LG) , Anynet+

※

(Samsung), BRAVIA Sync (Sony), EasyLink (Philips),
etc.

(X)

(X)

(O)

What is SIMPLINK?

Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control :
Power on/o, volume up/down, etc.

Refer to the TV owner’s manual for the details of
SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as
shown above.

Note

,

yDepending on the state of the unit, some

SIMPLINK operation may dier from your
purpose or not work.

yDepending on a TV or a player which

is connected with this unit, SIMPLINK
operation may dier from your purpose.

Connecting 17

ARC (Audio Return Channel) function

The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of the unit.

To use this function :

-Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.

-The setting method of HDMI-CEC and ARC may
dier depending on the TV. For details about
ARC function, refer to your TV manual.

-You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).

-You must connect the HDMI OUT on the unit
with HDMI IN of the TV that supports ARC
function using an HDMI cable.

-You can connect only one Sound bar to TV
compatible with ARC.

Note

,

yARC function is automatically selected when

ARC signal comes in from TV, no matter
what kind of the function you are using.

yYou can enjoy the TV audio through the

speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)

ySet up the sound output of TV to listen to

the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (HDMI ARC)]

yDetails of TV setting menu vary depending

on the manufacturers or models of your TV.

Additional information for HDMI

yWhen you connect an HDMI or DVI compatible

device make sure of the following:

- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.

- The connected device’s video input is set
correctly for this unit.

- The connected device is compatible with
720 x 576p, 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.

yNot all HDCP-compatible HDMI or DVI devices

will work with this player.

- The picture will not be displayed properly with
non-HDCP device.

Note

,

yIf a connected HDMI device does not accept

the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.

yChanging the resolution when the

connection has already been established
may result in malfunctions. To solve the
problem, turn o the player and then turn it
on again.

yWhen the HDMI connection with HDCP

is not veried, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.

yIf there are noises or lines on the screen,

please check the HDMI cable (length is
generally limited to 4.5 m(15 ft).

yYou cannot change the video resolution

in the HDMI IN mode. Change the video
resolution of the connected component.

yIf the video output signal is abnormal when

your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 576p, 720p, 1080i or
1080p.

2

Connecting

Connecting18

Optional equipment connection

HDMI connection

For enjoying sound only

You can enjoy the sound from the external device

2

you connect.

Connecting

To the Blu-ray disc player,
DVD player, etc.

1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the audio device such as Blu­ray disc player, DVD player, etc.

2. Set the input source to HDMI IN. Press
repeatedly FUNC on the remote control or F on
the unit until the function is selected.

For enjoying both sound and picture

You can enjoy both sound and picture from the
external device you connect.

1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the external device such as
Blu-ray disc player, DVD player, etc.

2. Connect HDMI OUT jack on the back of the unit
to HDMI IN jack on the TV.

3. Set the input source to HDMI IN. Press
repeatedly FUNC on the remote control or F on
the unit until the function is selected.

Note

,

yWith the unit connected to external devices

and TV as above illustration, TV will output
picture and sound from external devices
when the unit is turned o in HDMI IN
mode.

yHDMI OUT jack is for TV connection. Even

though PCM multi channel is inputted to
the unit through an HDMI cable, the unit
can only output 2 channel to TV.

yAudio sources without any transformation

pass through this unit when this unit is
turned o.

Connecting 19

PORT. (Portable) IN connection

Listening to music from your
portable player

The unit can be used to play the music from many
types of portable players or external devices.

1. Connect the portable player to the PORTABLE
IN connector of the unit.

2. Turn the power on by pressing 1 (Power).

3. Select the PORTABLE function by pressing
FUNC on the remote control or F on the unit
until the function is selected.

4. Turn on the portable player or external device
and start playing it.

OPTICAL IN connection

Connect an optical output jack of external devices
to the OPT. IN jack.

Optical cable

1. Connect the OPT. IN jack on the back of the unit
to optical out jack of your TV (or digital device
etc.)

2. Select the input source to OPTICAL by pressing
FUNC on the remote control or F on the unit
until the function is selected.

To directly select the OPTICAL function, press

OPTICAL on the remote control.

3. Listen to sound from the connected device.

4. Press OPTICAL to exit from OPTICAL.
Function is retuned to previous one.

2

Connecting

Connecting20

Understanding Network Connection

Basic Connection

A

Wired or Wi-Fi connection to router.

B

Wired and wireless connection.

You can use multiple speakers in a multi-room conguration.

2

Connecting

Router

A

Router

LAN

OR

Speaker

Speaker

Speaker (Main)

B

Router

LAN

Speaker (Add)

Group playback using Music Flow Player app

You can use multiple speakers in a multi-room conguration. (page 40)

Group setting via
Music Flow Player
app

Download

Music Flow Player app

Connecting 21

Installing “Music Flow Player” App

Through “iTunes store” or “Google
Play Store”

1. Tap the “iTunes store” icon or “Google Play Store”
icon.

2. Type in “Music Flow Player” in the search bar and
tap “Search”.

3. Select “Music Flow Player” in the search result list
to download.

Note

,

yMusic Flow Player app will be available in

version of the software as follow;
Android OS : Ver 2.3.3 (or later)
iOS O/S : Ver 5.1.1 (or later)

yDepending on the device, “Music Flow

Player” app may not work.

Through QR code

Install “Music Flow Player” app through QR code.
Scan the QR code using the scanning application.

(Android OS)

Note

,

yMake sure that your smart device is

connected to the internet.

yMake sure that your smart device has a

scanning application. If you don’t have,
download it from “iTunes store” or “Google
Play Store”.

(Apple iOS)

2

Connecting