Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
As an ENERGY STAR®Partner,
LG has determined that this
product or product models meet
the ENERGY STAR®guidelines for
energy efficiency.
ENERGY STAR is a U.S. registered mark.
®
P/No. : MFL62514301 (02)
Dear Customer,
Thank you for purchasing the LG DVD Player. After going through
the instruction manual, you will be able to enjoy all the features and
functions of the product. However if required, you can call our
customer help line for any clarification. If a demonstration is
needed, our representative can visit for the demonstration at your
DOOR STEP. "For this call or SMS on our customer care No"
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER
S ER V IC I NG TO Q UA LI F IE D S E RV I CE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
pre sence of impo rtant op erati ng and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,
DO NOT E XPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install
in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from over heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instruction has been
adhered to.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Shall the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to
open the enclosure. Visible laser radiation when open.
DO NOT STARE INTO BEAM.
CAUTION : The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION : concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit ; That is, a single outlet circuit which
powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's
manual to becertain.
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized service center.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
easily accessible.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyrighted material without
permission. This product features the copy protection
function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing
the pictures of these discs picture noise will appear. This
product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DE FIN ITIO N TE LEV ISI ON SET S AR E F ULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ÔSTANDARD
DEFINITIONÕ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 6 25p UNIT, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order
to make the discs compatible with the LG players when
formatting rewritable discs. When setting the option to Live
File System, you cannot use it on LG players. (Mastered/
Live File System : Disc format system for Windows Vista)
Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.
• Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.
• Refer to the TV owner’s manual for the details of SIMPLINK function.
• LG TV with SIMPLINK function has the logo as shown above.
• Use a higher version cable than 1.2A HDMI cable.
3
3
Place a disc inside when not in use
CD-G
CD-G Discs
" Always keep a disc inside the player to prevent
optical lens damage due to dust "
4
the player while moving the set
It is recommended to remove any disc from
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit
can play only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This number
must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code
from your player, the message “Check Regional
Code” appears on the TV screen.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Manufactured under
license from Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
About the Symbol Display
‘ ’ may appear on your TV display during operation and
indicates that the function explained in this owner’s
manual is not available on that specific DVD video disc.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Note: This player does not support all MP4 formats.
Introduction
5
Main Unit
1234 5 6 78
1 Power ( )
Turns the unit on and off.
2 DVD/CD Disc Drawer
3 Open/Close ( )
4 Play/Pause ( )
5 Stop ( )
6 TUNING (-/+) ( ), Skip / Search
7 Function (F)
Selects the function and input source.(DVD/CD, USB,
AUX, AUX OPT, PORTABLE, FM, AM)
11 10 9
Remote control
FUNCTION : Selects the function and input source. (DVD/CD, USB, AUX, AUX OPT,
PORTABLE, FM, AM)
SLEEP : Sets the System to turn off automatically at a specified time. (Dimmer : The
front panel display is dimmed.)
POWER : Switches the unit ON or OFF.
OPEN/CLOSE : Opens and closes the disc Drawer.
TITLE : If the current DVD title has a menu, the title menu appears on the screen.
Otherwise, the disc Title menu may not appear.
DISPLAY : Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu.
PRESET ( ) : Selects programme of Radio.
TUN. (-/+) : Tunes in the desired radio station.
(up/ down/ left/ right): Used to navigate on-screen displays.
ENTER : Acknowledges menu selection.
HT855SF & PF
Put the bat ter y into the remote con trol
Make sure that the + (plus) and – (minus) on the battery match those on the remote control.
8 Volume (VOLUME)
Controls the volume when using any function.
9 PORT. (Portable) IN port
You can enjoy music from portable device on your unit.
10 USB port
You can play video, image and sound files by connecting
the device.
11 MIC 1/ MIC 2
Connect a microphone to MIC 1 or MIC 2 to both
sockets. You cannot use the microphone when DivX
files playback or you select AUX OPT function.
RETURN ( ) : moving backwards in the menu or exited the setup menu.
REC ( ) : USB Direct Recording
STOP ( ) : Stops playback or recording.
PLAY ( ), MO./ST. : Starts playback. Selects Mono/Stereo.
PAUSE/STEP ( ) : Pause playback.
SKIP ( ) : Go to next or previous chapter/ track/ file.
SCAN ( ) : Search backward or forward.
TV HT SPK (Home theater Speaker ez Set-up) :
Press TV HT SPK to select the AUX OPT directly.
MUTE : To mute the sound.
VOL (Volume) (+/-) : Adjusts speaker volume.
NIGHT : The night mode is to improve listenable at
lower volumes.
DEMO : Quick access to India Optimised EQ Mode.
SPECIAL EQ (EQUALIZER effect) : You can choose
sound impressions (LG Sound Gallery).
REPEAT/RANDOM : To select a play mode.
(Repeat, Random).
SUBTITLE : During playback, press SUBTITLE
repeatedly to select a desired subtitle language.
0-9 numerical buttons : Selects numbered options
in a menu.
6
TV Control buttons : Controls the TV. (LG TV only)
Controlling the TV.
You can control the sound level, input source, and power
switching of LG TVs as well. Hold POWER (TV) and press
PR/CH (+/–) button repeatedly until the TV turns on or off.
PROG./MEMO. : Accesses or removes Program menu
stores FM Channels.
CLEAR : Removes a track number on the Program List.
RESOLUTION : Sets the output resolution for HDMI and
COMPONENT VIDEO OUT jacks.
ECHO VOL. : Adjusts echo volume.
MIC VOL. : Adjusts microphone volume.
VOCAL FADER : You can enjoy the function as karaoke,
by reducing singer vocal of music in the various source.
: This button is not available.
Hooking up the unit
Connect jacks on the unit and your TV (DVD
player or Digital Device etc.) using the cables.
Check the jacks of your TV, and choose the ,
or connection. Picture quality improves
in order from
to
.
Audio In connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one output for audio (mono),
connect it to the left (white)
connect it to the left white
audio jack on the unit.
BCA
Video Out connection
(B)
(A)
Connect the VIDEO
OUTPUT(MONITOR) jack on
the unit to the corresponding
input jack on your TV using a
Video cable.
AM FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Plug the power cord into the
power source
Resolution Setting
You can change the resolution for
component video and HDMI output.
Press RESOLUTION repeatedly to select
the desired resolution - 480i (or 576i),
480p (or 576p), 720p, 1080i, 1080p. The
res olutio n may no t be sele cted
depending on the connection or TV.
•
Depending on your TV, some of the
resolution settings may result in the
picture disappearing or an abnormal
picture appearing. In this case, press
RESOLUTION repeatedly until the
picture re-appears.
You can set 1080p video resolution to enjoy
Full HD picture quality. (Full HD up-scaling)
HDMI Out connection ( )
C
Con nect the HDMI
OUTPUT jack on the
unit to the HDMI input
j a c k o n a H DM I
compatible TV using a
HDMI cable.
Component Video connection
Connect the COMPONENT
VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
Available resolution according to connection
Displayed resolution in display window and
outputted resolution may different according
to connection type.
[HDMI OUT]: 1080p, 1080i, 720p and 480p
(or 576p) and 480i (or 576i) [COMPONENT
VIDEO OUT]: 480p (or 576p) and 480i
(or 576i) [VIDEO OUT]: 480i (or 576i)
7
Notes on HDMI Out connection
If your TV does not accept your resolution setting,
•
abnormal picture appears on the screen. (“TV do
not support” will appears in screen). Please read
owner’s manual for TV, and then set the
resolution that your TV can accept.
• Changing the resolution when the unit is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
unit and then turn it on again.
• When you connect a HDMI or DVI compatible
device make sure of the following :
- Try switching off the HDMI/ DVI device and this
unit. Next, switch on the HDMI/ DVI device and
leave it for around 30 seconds, then switch on
this unit.
- The connected device’s video input is set
correctly for this unit.
-
The connected device is compatible with
720X480i(576i), 720X480p(576p), 1280X720p,
1920X1080i or 1920X1080p video input.
The 1080p, 720p and 480p(576p) resolutions are
the progressive scan applied resolution.
• Not all HDCP-compatible DVI devices will
work with thi s unit.
- The picture will not be displayed properly
with non-HDCP device.
Enjoying audio from an external source
and selecting the function
You can enjoy audio from an external source
through your unit. And You can select the function.
Press FUNCTION repeatedly to select the desired
input source and the function (DVD/CD, USB, AUX,
AUX OPT, PORTABLE, FM, AM).
Digital Audio in connection
Connect the unit’s
OPTICAL IN jack to
the optical out to jack
on your TV (or Digital
Device etc.)
Speaker Setting up
Attaching the speakers to the DVD
receiver
You will have received six speaker
cables.
Each one is colour - coded by a band near
each end and connects one of the six
speakers to the DVD receiver.
Connect the wires to the DVD
receiver.
Match each wire’s coloured band to the same
coloured connection terminal on the rear of the
DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open
the connection terminal. Insert the wire and
release the finger pad.
Connect the black end of each wire to the terminals
marked -(minus) and the other end to the terminals
marked + (plus).
Connect the wires to the speakers.
Connect the other end of each wire to the correct
speaker according to the colour coding
REAR RREAR R
CENTERCENTER
REAR LREAR L
SPEAKER
Grey
Red
Green
Orange
Blue
White
Main Unit
FRONT RFRONT R
SUB WOOFERSUB WOOFER
FRONT LFRONT L
To connect the cable to the speakers, press
each plastic finger pad to open the connection
terminals on the base of each speaker. Insert
the wire and release the finger pad.
Be careful of the following
Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
*Speaker duct: A hall for plentiful bass sound
on speaker cabinet(enclosure). Use the rear
speaker at least 30 CM away from either TV
screen or PC monitor.
POSITION
Behind you and to your right.
In front of you, to the right of the screen.
Above screen, directly in front of you.
This can be placed in any front position.
Behind you and to your left.
In front of you, to the left of the screen.
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.