LG HSUC2465DA3, S246DC, S186DHU Owner’s Manual

Page 1
LG Room
Air Conditioner
OWNER'S MANUAL
LG
IMPORTANT
• Please read this owner's manual carefully and thoroughly before
installing and operating your room air conditioner.
• Please retain this owner's manual for future reference after reading
it thoroughly.
Prior
to installation, this air-
conditioning
unit must be
submitted
for approval by the
utility
service which provides
electricity
(EN 61000-2,
EN
61000-3 Norm).
website http://www.lgservice.com
MODELS : S4/S5 Chassis
ENGLISH
Page 2
Page 3
Page 4
Ope ration indicating
lamps
Page 5
TEMP.
TIME
OFF
hr.
4
2
5
1
6
3
7
About the remote control on the system
Features of the Remote Control
OPERATION DISPLAY
Displays the operation conditions.
AIRFLOW DIRECTION START/STOP BUTTON
Used to stop or start louver movement and set the desired up/down airflow direction.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
OFF TIMER BUTTON
Used to set the time of stopping operation.
START/STOP BUTTON
Operation starts when this button is pressed, and stops when the button is pressed again.
ROOM TEMPERATURE SETTING BUTTONS
INDOOR FAN SPEED SELECTION BUTTON
1
2
3
4 5
6
7
Signal transmitter
Transmits the signals to the room air conditioner.
Remote Controller
8
JET COOL OPERATION BUTTON
8
Used to start or stop the speed (speed cooling operates super high fan speed in cooling mode.)
5
Page 6
sn o
ituac
er P yt
e f
a Ssnoitcurtsn
I gn itarepO
e c
n a n e
tnia
M dna e
raCs
p
i T g
n
i t
oohse
lbu
or T
Cooling Mode
Healthy Dehumidification Operation
(Cooling Model)
1
3
2
4
Features of the Remote Control
(1) OPERATION MODE
(2) OPERATION PROCEDURE
Operation Mode Selection button
1st
2nd
3rd
4th
Start/Stop Button
Operation Mode Selection Button
Room Temperature Setting Button
Indoor Fan Speed Selection Button
TEMP.
OFF
TIME
hr.
6
Page 7
TEMP.
Set the fan speed.
OFF
TIME
hr.
TEMP.
OFF
hr.
TIME
Cooling Healthy
TIME
TEMP.
hr.
OFF
OFF
hr.
TIME
Dehumidification
TEMP.
OFF
hr.
TIME
7
Page 8
Select Healthy Dehumidification Operation.
Press the operation Mode Selection Button. Each time the button is pressed, the operation mode is shifted in the arrow direction.
• The indoor fan speed is automatically set to the low, so the shift of the indoor fan speed is impossible because of already being set to the best speed for Dry Operatrion by Micom Control.
• The indoor fan may be stopped not so as to be the room overcooling.
OFF
TIME
hr.
TEMP.
OFF
TIME
hr.
Cooling Healthy
OFF
TIME
hr.
Dehumidification
Set the fan speed.
• Select the fan speed in two steps
-low, high.
TEMP.
• The display shows high fan speed.
OFF
TIME
hr.
8
Page 9
TEMP.
Press the OFF Time Button.
1. Press the OFF Time Button.
2. Check the OFF Time LED of the room air conditioner.
3. The Timer is programmed by 1 hour each pressing the OFF Time button from 1 hour to 7 hours.
OFF TIMER CONTROL SETTING
OFF
TIME
hr.
Press the Jet Cool button to operate the speed cooling mode and the unit will operate at super high fan speed on cooling mode for 30 minutes.
cancel the
To fan speed button or the room temperature setting button again mode.
TEMP.
OFF
TIME
hr.
OFF
TIME
hr.
Jet
Cool mode, press the Jet Cool button, the
and the unit will operate at high fan speed on cooling
p
p
eeB
e
eB
,
,pee
p
e
eB
B
9
Page 10
Press the Start/Stop Button. (Confirm the unit on operation.)
Press the Airflow Direction Control Button and the vertical louvers swing up and down automatically.
Press again the Airflow Direction Control Button to set the vertical louver at the desired airflow direction.
Caution
• Always use the remote controller to adjust the airflow direction. Manually moving the vertical airflow direction louver by hand could cause operation errors.
• When air conditioner operation is stopped, the vertical airflow direction louver will close the air outlet vent of room air conditioner.
Horizontal Airflow Direction Control
• Adjust the horizontal airflow direction by manually moving the horizontal airflow direction louver by hand.
Airflow Direction Control
The airflow direction can be adjusted as desired by using the remote controller. This is effective when you want to cool yourself directly, such as after taking a bath.
1
2
3
10
Page 11
ON/OFF
button
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep". If you want to stop the operation, re-press the button.
High
Speed
11
Page 12
Air outlet ventAir inlet vent
Vertical louver
Air filters (behind front panel)
Horizontal louver
12
Page 13
The heat exchanger coils and panel vents of the outdoor unit should be checked regularly. If clogged with dirt or soot, the heat exchanger and panel vents may be professionally steam cleaned.
NOTE: Dirty or clogged coils will reduce the operating efficiency of the system and cause higher operating costs.
13
Page 14
Page 15
9
12
7
15
Page 16
P/No.:MFL30291710
Loading...