OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before
operating your set and retain it for future reference.
TYPE : WALL MOUNTED
*MFL67643001*
<![endif]>PORTUGUESEENG FRANCAISGE ENGLISH
Rev : 07 (03T15) |
www.lg.com |
2 TIPS FOR SAVING ENERGY
<![endif]>ENGLISH
Here are some tips that will help you to minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below :
•Do not cool the indoor excessively. This may be harmful for your health and may consume more electricity.
•Block sunlight with blinds or curtains while you are operating the air conditioner.
•Keep doors or windows closed tightly while you are operating the air conditioner.
•Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
•Speed up the fan to cool or warm indoor air quickly, in a short period of time.
•Openwindowsregularlyforventilationastheindoorairqualitymaydeteriorateiftheairconditioner is used for many hours.
•Clean the air filter once every 2 weeks. Dust and impurities collected in the Air filter may block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS |
3 |
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situation and ensure peak performance of you product.
!WARNING
It can result in serious injury or death when the directions are ignored.
!CAUTION
It can result in minor injury or product damage when the directions are ignored.
!WARNING
•Installation or repairs made by unqualified persons can result in hazards to you and others.
•Air conditioner shall be installed in accordance with national wiring regulations.
•The information contained in the manual is intended for use qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.
•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
•This appliance is not intend for use by persons (including children) with reduced physical, sensory ormentalcapabilities,orlackofexperienceandknowledge,unlesstheyhavebeengivensupervision or instruction concerning use of the appliance by a person responsible for theirs safety.
•Children should be supervised to ensure that they do not play with the appliance.
•When the power cord is to be replaced,replacement work shall be performed by authorized personnel only genuine replacement parts.
Installation
•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.
•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.
•Always use a power plug and socket with a ground terminal. Failure to do so may result in electric shock or product failure.
•Installthepanelandthecoverofthecontrolboxsafely.Failuretodosomayresultinexplosionorfire.
•Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.
•Do not modify or extend the power cable.If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.
•Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.
•Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.
<![endif]>ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
<![endif]>ENGLISH
Operation
•Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.
•Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.
•Do not place any objects on the power cord. It may result in electric shock or product failure.
•Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.
•Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.
•Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.
•Do not allow water to run into the air conditioner. It may result in explosion or fire.
•Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.
•Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.
•When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.
•Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.
•Stop operating and close the window in storm or hurricane. If possible remove the product from the window before hurricane arrives.
•Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.
•Contactanauthorizedservicecenterwhentheairconditionerissubmergedintowaterduetoflooding. Failure to do so may result in explosion or fire.
•Be cautious water could not enter the product.
•Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in explosion or fire, serious injury, or product failure.
•Turnthemainpoweroffandunplugthepowerplugwhenyoucleanorrepairtheairconditioner.Failure to do so may result in death, serious injury, or product failure.
•Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.
•For inner cleaning, contact an Authorized Service Center or a dealer.
•Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or electric shock.
IMPORTANT SAFETY INSTRUCTIONS |
5 |
! CAUTION
Installation
• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. |
<![if ! IE]> <![endif]>ENGLISH |
Failure to do so may result in product failure. |
|
• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may |
|
result in product failure. |
|
• Keep level even when installing the product. |
|
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not |
|
inconvenience the neighbors. Failure to do so may result in conflict between neighbors. |
|
• When transporting the equipment, there should be at least 2 or more people, or a forklift. It |
|
may result in serious injury. |
|
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly.It may |
|
result in product failure. |
|
Operation |
|
•Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.
•Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.
•Do not block the inlet or outlet of air flow. It may result in explosion or product failure.
•Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.
•Never touch the metal parts of the air conditioner when you remove the air filter. It may result serious injury or product failure.
•Do not place any objects on the air conditioner. It may result in product failure.
•Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.
•Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.
•Donotdrinkthewaterdrainedfromtheairconditioner.Itmayresultinserioushealthcomplications.
•Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.
•Donotmixthebatteriesfortheremotecontrolwithothertypesofbatteriesormixnewbatteries with used batteries. Failure to do so may result in product failure.
•Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.
•Stopusingtheremotecontrolifthereisabatteryfluidleak.Ifyourclothorskinisexplosiontothe battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.
•If you swallow the battery fluid from a leak. Wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.
6 CONTENTS
<![endif]>ENGLISH
Contents
2TIPs FOR SAVING ENERGY
3IMPORTANT SAFETY INSTRUCTIONS
7 |
BEFORE USE |
|
|
7 |
Components |
7 |
- Indoor unit |
7 |
- OUTdoor unit |
8Inserting batteries
8Installing the remote control holder
8Operating method
9USING THE REMOTE CONTROL
9Wireless remote control
10BASIC FUNCTIONS
10Cooling your room (Cooling operation)
10Removing humidity (Dehumidifying operation)
11Airing your rooM (Air Circulation operation)
11 Adjusting the fan speed
11 Adjusting the air flow direction
11 Setting the timer
11- Setting the current time
12- Turning on the air conditioner
automatically at a set time
12- Turning off the air conditioner automatically at a set time
12 |
- Canceling the timer setting |
12 |
Setting sleep mode |
13 Advanced FUNCTIONS
13Changing room temperature quickly
(JET COOL)
13Indoor air purification (Auto Clean operation)
14Auto operation (Artificial intelligence)
14Display screen brightness
14°C/°F Conversion
14Energy saving cooling mode
14Mosquito Away operation
15Disclaimer
16Operating the air conditioner without the remote control
16 Restarting the air conditioner automatically
16- Disabling auto restart
17MAINTENANCE
18Cleaning air filter
18Cleaning Triple filter (optional)
18Cleaning 3M filter (optional)
19TROUBLESHOOTING
19 Self-diagnosis function
19 Before requesting service
BEFORE USE |
7 |
BEFORE USE
Components |
|
Air Inlet |
|
|
|
Indoor unit |
3M filter (Optional) |
On/off button |
|
Air filter |
|
Front cover |
|
Operation lamp |
|
|
|
|
|
Signal Receiver |
<![endif]>ENGLISH
Triple filter (Optional) |
Mosquito Away device |
and 3M filter (Optional) |
Air outlet
Vertical louver
Horizontal vane
*The feature can be changed according a type of model.
!NOTE
•The number of operation lamps and their locations may vary, depending on the model of the air conditioner.
Air inlet |
Connecting wires |
Air outlet
Piping
Base Plate |
Drain hose |
|
|
*The feature can be changed according a type of model. |
|
8 BEFORE USE
<![endif]>ENGLISH
Insert batteries before using the remote control. The battery type used is AAA (1.5 V).
1. Remove the battery cover.
2.Insertthenewbatteriesandmakesurethatthe
(+) and (-) terminals of the batteries are installed correctly.
3. Reattach the battery cover.
!NOTE
•If the display screen of the remote control starts to fade, replace the batteries.
Install the holder where there is no direct sunlight to protect the remote control.
1. Choose a safe and easily-accessible place.
2.Fix the holder by fastening the 2 screws firmly with a screwdriver.
3.Slide the remote control into the holder.
Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.
*The feature can be changed according a type of model.
!NOTE
•Theremotecontrolmayoperateotherelectronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.
•For proper operation, use a soft cloth to clean the signal transmitter and receiver.
USING THE REMOTE CONTROL |
9 |
USING THE REMOTE CONTROL
You can operate the air conditioner more conveniently with the remote control.
Control |
Display |
Description |
|
panel |
screen |
||
|
E/SAVING
Energy saving button : Operates energy saving cooling.
|
|
|
|
|
|
Auto clean button : Remove moisture and |
|
|
|
|
A/CLEAN |
|
clean inside of the indoor unit when turn off |
|
|
|
|
|
|
the power. |
|
|
F |
|
|
|
Mosquito Away operation button : Used to |
|
|
|
|
|
start or stop Mosquito Away operation. |
|
|
|
C |
|
|
|
|
|
|
|
|
- |
|
On/Off button : Turn the power On/Off. |
|
AM |
ON |
|
Display |
|
|
|
hr.PM |
OFF |
123 |
screen |
C |
Temperature adjustment buttons : Adjust |
|
|
|
|
|
||
|
|
|
|
TEMP |
|
the room temperature when cooling. |
E/SAVING |
A/CLEAN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operation mode selection button : Select |
||||
|
|
|
|
|
|
|
MODE |
|
|
|
|
|
|
|
|
the operation mode. |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
TEMP |
|
|
|
|
|
MODE |
|
|
|
|
Cooling operation ( |
) |
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Auto operation ( |
|
|
) |
|
||||
FAN |
|
|
|
|
|
JET |
|
|
|
|
|
|
|
|
|
|
) |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
SPEED |
|
|
|
|
|
MODE |
|
Control |
|
|
|
|
Dehumidifying operation ( |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Air circulation operation ( |
) |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
SWING |
|
LIGHT |
|
ROOM |
|
panel |
|
FAN |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
TEMP |
|
|
|
|
|
|
|
Indoor fan speed button : Adjustthefanspeed. |
|||||||
|
|
|
TIMER |
C/ F [5SEC] |
|
|
|
SPEED |
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
SLEEP |
|
|
|
|
|
OFF |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
ON |
|
|
|
|
|
JET |
|
|
|
|
Jet cool button : Cools down the indoor |
|||||||
|
|
|
|
|
|
|
|
|
|
|
COOL |
|
|
|
|
temperature within a short period of time. |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
SET |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
CLEAR |
|
|
|
|
|
|
|
|
|
|
Air flow direction button : Adjusttheairflow |
||||||
|
|
|
TIME [3SEC] |
|
|
|
|
|
SWING |
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
direction vertically or horizontally. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
- |
|
Light button : Adjusts the brightness of the |
||||||
|
|
|
|
|
|
|
|
|
|
|
LIGHT |
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
indoor unit display. |
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
ROOM |
|
|
|
|
Temperature display button : Displays the |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
room temperature and also changes unit from |
|||||
|
|
|
|
|
|
|
|
|
|
|
TEMP |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
C/ F [5SEC] |
|
|
|
|
°C to °F if pressed for 5 seconds. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
SLEEP |
|
|
|
hr |
Sleep mode auto button : Sets the sleep |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mode auto operation. |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ON |
OFF |
Timer button : Sets the current time and the |
|
start / end time. |
|||
|
|
|
|
SET |
- |
Set/clear button : Sets or cancels functions. |
|
|
|
CLEAR |
|||
|
|
TIME [3SEC] |
|
|
|
|
|
|
|
|
|
Rev : 07 (03T15) |
- |
Reset button : Initialize the air conditioner |
|||
settings. |
|||||
|
|
|
|
<![endif]>ENGLISH
10 BASIC FUNCTIONS
<![endif]>ENGLISH
1.Press to turn on the power.
2.Press MODE repeatedly to select the cooling operation.
- is displayed on the display screen.
Thismoderemovesexcessmoisturefromanenvironmentwithhighhumidityorintherainyseason, in order to prevent mold. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.
1.Press to turn on the power.
2.Press MODE repeatedly to select the dehumidifying operation.
- is displayed on the display screen.
3. Press or to set the desired temperature. - The temperature range is 18°C(64°F)-
30°C(86°F).
! NOTE
•In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.
BASIC FUNCTIONS |
11 |
Airing your rooM (Air
Circulation operation)
1.Press to turn on the power.
2.Press MODE repeatedly to select the air circulation operation.
- is displayed on the display screen.
3. Press |
FAN |
to adjust the fan speed. |
SPEED |
1. Press FAN repeatedly to adjust the fan speed.
SPEED
Remark Speed
High
Medium
Low
Natural wind
.
1. To adjust the direction of the air flow vertically, press SWING change the air flow direction automatically.
!NOTE
•Adjustingtheairdeflectorarbitrarilymaycause product failure.
•If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air deflector may not match the
icon displayed on the remote control. When this
occurs, press SWINGto adjust the direction of the air flow again.
You can use the timer function to save energy and to use the air conditioner more efficiently.
1. Press and hold it for longer than 3
seconds.TIME [3SEC]
- The AM/PM icon flickers at the bottom of the display screen.
2. Pressor to select the minutes.
3. Press SET to finish.
CLEAR
TIME [3SEC]
<![endif]>ENGLISH
12 BASIC FUNCTIONS
<![endif]>ENGLISH
1. Press ON
- The icon below flickers at the bottom of the display screen.
2. Pressorto select the minutes.
3. Press SET to finish.
CLEAR
TIME [3SEC]
4. When setting the timer, current time and ON icon are displayed on the display screen indicating that the desired time is set.
1. Press OFF
- The icon below flickers at the bottom of the display screen.
2. |
Press |
|
or |
to select the minutes. |
3. |
Press |
SET |
to finish. |
|
CLEAR |
||||
4. |
|
TIME [3SEC] |
|
|
When setting the timer, current time and OFF |
icon are displayed on the display screen indicating that the desired time is set.
1. Press |
SET |
to cancel all timer setting. |
CLEAR |
||
|
TIME [3SEC] |
|
Use the sleep mode to turn off the air conditioner automatically when you go to sleep.
1. Press |
|
to turn on the power. |
|
|
|||
2. Press |
SLEEP |
|
|
3. Press |
|
or |
to select the hour (Up to |
7 hours). |
|
|
|
4. Press SET to finish.
CLEAR
TIME [3SEC]
- is displayed on the display screen.
!NOTE
•In the Cooling and Dehumidifying modes, the temperature increases by 1°C (2°F) after 30 minutes and by a further 1°C (2°F) after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C (4°F) from the preset temperature.
ADVANCED FUNCTIONS |
13 |
Advanced FUNCTIONS
The air conditioner offers some additional advanced functions.
1. Press to turn on the power.
2. Press JET
COOL
- In jet cooling mode, strong air blows out at a temperature of 18°C (64°F) for 30 minutes.
!NOTE
•Powerful Cooling enable in Cooling/ Fan / Dehumidifying/Artificial intelligent.
•This function may not be supported, depending on the model.
In the cooling and dehumidifying operations, moisture is generated inside the indoor unit. Use the auto cleaning function to remove such moisture.
1. Press A/CLEAN
- is displayed on the display screen.
- If you turn off the power, the fan operates for
30 minutes and clean the inside of the indoor unit.
! NOTE
Some buttons cannot be used while the auto cleaning function is in operation.
<![endif]>ENGLISH
14 ADVANCED FUNCTIONS
<![endif]>ENGLISH
In this mode, the fan speed and the temperature adjust automatically , based on the room temperature.
1.Press to turn on the power.
2.Press MODE repeatedly to select auto operation.
3.Press or to select the desired operation code if the temperature is higher or lower than the desired temperature.
- is displayed on the display screen.
Code Description
2 Cool
1 Cool slightly
0 Maintain room temperature
-1 Heat slightly
-2 Heat
!NOTE
•In this mode, you cannot adjust the fan speed, but you can set the air deflector to rotate automatically.
•Thisfunctionmaynotbesupported,depending on the model.
You can adjust the brightness of the indoor unit display screen.
1. Press LIGHT to turn on/off the lamp on the front cover.
The unit converses from °C to °F or from °F to °C if Room Temperature button is pressed for 5 seconds.
This mode minimizes power consumption during cooling and increases the set temperature to the optimal level for a more comfortable environment.
1.Press to turn on the power.
2.Press MODE repeatedly to select the cooling operation.
3.Press E/SAVING
- is displayed on the display screen.
!NOTE
•Thisfunctionmaynotbesupported,depending on the model.
•Possible,Differenttemperatureisdisplayedon between remote controller and air conditioner during operation.
Mosquito Away is a device to radiate frequency mosquitoes don’t like.
1 Press Mosquito Away LED Light up on the display.
2. Press again to finish.
! NOTE
You can use this function by pressing without turning the air conditioner on. At this time a horizontal vane moves and the fan speed low. Both the mosquito away and the cooling LED light up while mosquito away is in operation. This function may not be supported depending on the model.
ADVANCED FUNCTIONS |
15 |
IMPORTANT : Long term effect ont tested and mosquitoes may become resistant. Mosquito species used in the test below may differ from the mosquito species of your region. This product is one of the ways to manage mosquitoes and not intended to replace other protective devices against mosquitoes.
Test Details :
Tested by Intertek, Korea, according to LG internal testing method.
•Test conducted, three times at temperature of 27±2°C and humidity of 60±10%
•Test used two chambers size 33m3 and 19m3 connected by a channel made of white sheet, small chamber assumed to be outside (“outside chamber”) and the large chamber to be inside with the LG air conditioner (“inside chamber”).
•One person is placed inside the inside chamber to attract mosquitoes.
•For each test, 50 lab cultured 3-5 days old mosquitoes were released into outside chamber; number of mosquitoes coming into the inside chamber was counted every 10 minutes for 90 minutes under 2 settings :
- Control setting (low fan on + mosquito repelling ultrasonic on). - Treatment setting (low fan on + mosquito repelling ultrasonic off.
Test Result :
Found to repel on average 72.5% of Aedes aegypti mosquitoes. Repel rate shows percentage of mosquitoes prevented from entering the inside chamber after 90 minutes of Treatment setting compared to Control setting. Represented average of 72.5% derived from 73.1%, 64.3%, 80.0%. Results may vary in other settings, including but not limited to temperature, humidity, location, space, mosquito species, number of mosquitoes, number of persons, and operation time.
<![endif]>ENGLISH
16 ADVANCED FUNCTIONS
<![endif]>ENGLISH
You can use the on/off button of the indoor unit to operation the air conditioner when the remote control is unavailable. However, the fan speed is set to high.
1. Open the front cover.
- Lift up both side of the cover slightly.
*The feature can be changed according a type of model.
2. Press the On/Off button.
When the air conditioner is turned on again after apowerfailure,thisfunctionrestorestheprevious settings. This function is a factory default setting.
1. Open the front cover.
- Lift up both side of the cover slightly.
*The feature can be changed according a type of model.
2.PresstheOn/Offbuttonandholditfor6seconds. - The unit will beep twice and the lamp will blink twice 4 times.
On/Off button
*The feature can be changed according a type of model.
-Forcoolingandheatingmodel,theoperationmode changes, depending on the room temperature.
Room Temp. |
Set Temp. |
Operation mode |
||
|
|
|
|
|
Below 21°C |
24°C (76°F) |
Heating opera- |
||
(70°F) |
|
tion |
||
|
|
|
|
|
Above 21°C |
23°C (74°F) |
Dehumidifying |
||
(70°F) and |
|
operation |
||
below 24°C |
|
|
|
|
(76°F) |
|
|
|
|
|
|
|
||
Above 24°C |
22°C (72°F) |
Cooling opera- |
||
(76°F) |
|
tion |
- For cooling only model, the temperature is set to 22°C(72°F).
On/Off button
*The feature can be changed according a type of model.
-Tore-enablethefunction,presstheOn/Offbutton and hold it for 6 seconds. The unit will beep twice and the lamp will blink 4 times.
!NOTE
•IfyoupressandholdtheOn/Offbuttonfor3-5 seconds,theunitwillswitchtothetestoperation. In the test operation, the unit blows out strong air for cooling for 18 minutes and then returns to the factory default setting.
MAINTENANCE 17
Clean the product regularly to maintain optimal performance and to prevent possible breakdown.
Air filter |
3M filter (Optional) |
|
<![endif]>ENGLISH
* The feature can be changed according a type of model.
Item |
Cleaning interval |
Cleaning method |
|
Air filter |
2 weeks |
See “Cleaning Air filter” |
|
|
|
|
|
Triple filter |
3 months |
See “Cleaning Triple filter” |
|
|
|
|
|
Plasma filter |
1 month |
See “Cleaning Plasma filter” |
|
Indoor unit surface |
Regularly |
Use a soft, dry cloth. Do not use bleach or abrasives. |
|
Outdoor unit |
Regularly |
Use steam to clean the heat exchanger coils and the |
|
panel vents (consult with technician). |
|||
|
|
!CAUTION
•Turnoffthepowerandunplugthepowercordbeforeyouperformanymaintenance;otherwise it may cause electric shock.
•Never use water that is hotter than 40°C when you clean the filters. It may cause deformation or discoloration.
•Never use volatile substances when you clean the filters. They may damage the surface of the product.
•Do not washed the 3M filter with water, because the filter can be damaged.
!NOTE
•The location and shape of the filter may differ, depending on the model.
•Make sure to clean the heat exchanger coils of the outdoor unit regularly, as dirt collected in the coil may decrease the operational efficiency or increase energy costs.
18 MAINTENANCE
<![endif]>ENGLISH
CleaningtheAirfilteronceevery2weeksormore if necessary.
1.Turn off the power and unplug the power cord.
2.Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according a type of model.
3. Hold the knob of the Air filter, lift it up slightly and remove it from the unit.
* The feature can be changed according a type of model.
4.Clean the filter with a vacuum cleaner or with warm water.
- If dirt is difficult to remove, wash the filter in lukewarm water with detergent.
5.Dry the filter in the shade.
!NOTE
•Forinnercleaning,contactanAuthorizedService center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergentmayalsocausefailureofproduct,fire, or electric shock.
1.Turn off the power and unplug the power cord.
2.Open the front cover and remove Air filter (See “Cleaning Air filter").
3.Pull out the Triple filter.
*The feature can be changed according a type of model.
4. Dry the filer in direct sunlight for 2 hours.
!NOTE
•Thelocationandshapeofthefiltersmaydiffer, depend on the model.
Clean the filter once every 1 months and change the new filter once every 6 months.
1.Turn off the power and unplug the power cord.
2.Open the front cover and remove Air filter. (See “Cleaning Air filter”).
3.Pull out 3M filter.
3M filter
3M filter
* The feature can be changed according a type of model.
4. Use a vacuum cleaner to remove any dirt. Do not wash the filter with water may be makes damage to the filter.
!NOTE
•Thelocationandshapeofthefiltersmaydiffer, depend on the model.
TROUBLESHOOTING 19
Thisproducthasabuilt-inself-diagnosisfunction.Ifanerroroccurs,thelampoftheindoorunitwillblink in 2 second intervals. If this occurs, contact your local dealer or service center.
Please check the following before you contact the service center. If the problem persists, contact your local service center.
Problem |
Possible causes |
Corrective action |
|
There is a burning smell and a |
|
|
|
strange sound coming from the unit. |
|
|
|
Waterleaksfromtheindoorunit |
|
|
|
even when the humidity level is low. |
|
Turnofftheairconditioner,unplug |
|
The power cord is damaged or |
- |
the power cord and contact the |
|
generating excessive heat. |
|
service center. |
|
Aswitch,acircuitbreaker(safety, |
|
|
|
ground) or a fuse is not operated |
|
|
|
properly. |
|
|
|
|
|
|
|
|
The air conditioner is unplugged. |
Check whether the power cord |
|
|
is plugged into the outlet. |
||
|
|
|
|
|
A fuse is blown or the power |
Replace the fuse or check if the |
|
|
supply is blocked. |
circuit breaker has tripped. |
|
|
|
|
|
|
|
Turn off the air conditioner when |
|
Theairconditionerdoesnotworks. |
A power failure has occurred. |
a power failure occurs. When the |
|
powerisrestored,wait3minutes, |
|||
|
|
||
|
|
and then on the air conditioner. |
|
|
|
|
|
|
The voltage is too high or too low. |
Check if the circuit breaker has |
|
|
tripped. |
||
|
|
|
|
|
The air conditioner turned off |
Press the power button again. |
|
|
automatically at a preset time. |
|
<![endif]>ENGLISH
20 TROUBLESHOOTING
<![endif]>ENGLISH
Problem |
Possible causes |
Corrective action |
|
|
|
Makesurethattherearenocur- |
|
|
Air is not circulating properly. |
tains,blindsorfurnitureblocking |
|
|
|
the front of the air conditioner. |
|
|
|
Clean the Air filter once every 2 |
|
|
The Air filter is dirty. |
weeks. See “Cleaning Air filter” |
|
|
|
for more information. |
|
|
|
Insummer,itmaytakesometime |
|
|
The room temperature is too high. |
to cool indoor air. In this case, |
|
|
select the jet cool operation to |
||
|
|
cool indoor air quickly. |
|
|
|
Make sure that no cold air is |
|
The air conditioner does not |
Cold air is escaping from the room. |
escaping through ventilation |
|
generate cool air. |
|
points in the room. |
|
The desired temperature is higher |
Set the desired temperature to |
||
|
|||
|
than the set temperature. |
a level lower than the current |
|
|
temperature. |
||
|
|
||
|
|
Avoid using a heat generator |
|
|
There is a heating source nearby. |
such as an electric oven or a gas |
|
|
burner while the air conditioner |
||
|
|
is in operation. |
|
|
|
|
|
|
|
In the air circulation operation, |
|
|
|
air blows from the air conditioner |
|
|
Air circulation operation is selected. |
without cooling or heating the |
|
|
|
indoor air. Switch the operation |
|
|
|
mode to the cooling operation. |
|
|
|
|
|
|
|
Insomeoperationmodes,suchas |
|
|
The auto operation, jet opera- |
thejetordehumidifyingoperation |
|
It is not possible to adjust the |
modes, you cannot adjust the |
||
fan speed. |
tion or dehumidifying operation |
fan speed. Select an operation |
|
|
is selected. |
mode in which you can adjust |
|
|
|
||
|
|
the fan speed. |
|
|
|
In some operation modes, such |
|
|
|
astheaircirculationorjetopera- |
|
It is not possible to adjust the |
The air circulation operation or |
tionmode,youcannotadjustthe |
|
temperature. |
jet operation is selected. |
temperature. Select an operation |
|
|
|
modeinwhichyoucanadjustthe |
|
|
|
temperature. |
|
|
|
|
NOTE